The metareticulate pollen morphology of Alternanthera Forssk. (Gomphrenoideae,Amaranthaceae) and its taxonomic implications

Alternanthera (Amaranthaceae) is a diverse genus largely restricted to the American Tropics that belongs to the alternantheroid clade containing C₄ and C₃–C₄ intermediate species. This research focuses on the study of pollen characters by studying 13 species, representatives of the two major clades and subclades of Alternanthera. General palynological comparisons were conducted with light microscopy (LM), scanning electron microscopy (SEM) and with confocal laser scanning microscopy (CLSM) for exine ultrastructure. Twenty-five characters were measured and described for Alternanthera and among these, 14 pollen characters were used to discriminate pollen groups using cluster analysis and canonical analysis of principal coordinates (CAP). Pollen form and ornamentation, pores number, spines length, number of ektexinous bodies and nanospines on the ektexinous bodies on pore membranes, arrangement of nanopores and spines on structural elements, and metareticula form were taxonomically important and therefore used to construct the first palynological key to the alternantheroid clade species. Our study indicates that the seemingly subtle morphological variation of pollen is useful for recognising three main pollen types within Alternanthera. The much needed palynological terminology for describing the mesoporium in the metareticulate pollen of Amaranthaceae is provided.     

Pollen morphology and infra-generic evolutionary relationships in some Chinese species of Pedicularis (Scrophulariaceae)

 The pollen grains of 32 Chinese species of Pedicularis representing 13 groups within the genus were investigated using light microscopy and scanning electron microscopy. The genus is eurypalynous, the apertures may be tricolpate, trisyncolpate, or bisyncolpate and five types of surface ornamentation (microscabrate, microrugulate, retipilate, microreticulate and microfoveolate) were observed. Comparison of the different aperture types using light microscopy allows three pollen types to be distinguished. Examination of exine ornamentation with scanning electron microscopy enabled each pollen type to be divided into two or three sub-types (giving a total of seven sub-types). Pollen morphology within the genus is discussed in relation to infrageneric relationships, evolutionary and pollination biology. There is little correlation with the existing infrageneric taxonomy (some taxonomic groups have more than one pollen type, while the same pollen type may be found in several different species-groups), but greater correlation with the corolla morphology. Received January 10, 2002; accepted March 5, 2002 Published online: March 10, 2003     

Pollen morphology and taxonomic implications of Muscari Miller (Hyacinthaceae) species from Sicily

Pollen morphology of the native Sicilian species of the genus Muscari, one of which is endemic to Sicily, belonging to the subgenera Muscari, Leopoldia and Pseudomuscari, was studied using a light microscope and a scanning electron microscope. Pollen grains are monads, heteropolar and monosulcate; the exine is semitectate reticulate and perforate. The sulcus extends from distal to proximal face and its length is not directly proportional to the size of the granules and varies from one species to another.     

Reproductive ecology of the endangered Alpine species Eryngium alpinum L. (Apiaceae): phenology, gene dispersal and reproductive success

BACKGROUND AND AIMS: Eryngium alpinum (Apiaceae) is an endangered perennial, characteristic of the Alpine flora. Because the breeding system influences both demographic (reproductive success) and genetic (inbreeding depression, evolutionary potential) parameters that are crucial for population maintenance, the reproductive ecology of E. alpinum was investigated. Specifically, the aims of the study were (1) to determine the factors (resources and/or pollen) limiting plant fitness; and (2) to assess the potential for gene flow within a plant, within a patch of plants, and across a whole valley where the species is abundant. METHODS: Field experiments were performed at two sites in the Fournel valley, France, over three consecutive years. Studies included a phenological survey, observations of pollinators (visitation rates and flight distances), dispersal of a fluorescent powder used as a pollen analogue, the use of seed traps, determination of the pollen/ovule ratio, and an experiment to test whether seed production is limited by pollen and/or by resources. KEY RESULTS: E. alpinum is pollinated by generalist pollinators, visitation rates are very high and seed set is resource- rather than pollen-limited. The short flights of honeybees indicate a high potential for geitonogamy, and low pollen and seed dispersals suggest strong genetic structure over short distances. These results are interpreted in the light of previous molecular markers studies, which, in contrast, showed complete outcrossing and high genetic homogeneity. CONCLUSION:S. The study highlights the usefulness of adopting several complementary approaches to understanding the dynamic processes at work in natural populations, and the conservation implications for E. alpinum are emphasized. Although the studied populations do not seem threatened in the near future, long-term monitoring appears necessary to assess the impact of habitat fragmentation. Moreover, this study provides useful baseline data for future investigations in smaller and more isolated populations.     

Comparative egg morphology of six Meccus species and Triatoma recurva (Stål, 1868) Hemiptera: Reduviidae

We investigated the morphology and morphometry of eggs from the colonies of the Entomology Laboratory at ENCB‐IPN belonging to six species of the genus Meccus and Triatoma recurva, using both light and scanning electron microscopy. Egg ornamentation is an important parameter to consider in the differentiation of species. Samples were observed under a scanning electron microscope. Measurements of fifty eggs per species included length, width, and opercular diameter, which were used for the morphometric analysis. The results showed that the seven species display a polygonal ornamentation dominated by hexagons; the operculum shows also a polygonal ornamental characteristic in each species. Morphometry provided valuable information for discriminating between closely related species of the genus Meccus and Triatoma recurva, a species akin to this group, thereby facilitating the complete discrimination of these species.     

Pollen morphology of Quercus sect. Ilex and its relevance for fossil pollen identification in southwest China

Pollen grains of 16 modern species of Quercus were examined by scanning electron microscopy (SEM) and light microscopy (LM). The focus of this investigation was on a small group (c. eight species) of alpine, sclerophyllous oaks that may form a monophyletic group within sect. Ilex. The data were combined with published data for Polar axis (P) and Equatorial diameter (E) for more than 80 species. Based on pollen morphology Quercus pollen grains were divided into three types: (1) The Cyclobalanopsis type is smallest (generally < 23 μm) in size, with P/E ratios of approximately 1.08 and a psilate or fine-grained surface; (2) Quercus sect. Ilex type is 23–29 μm, the P/E ratio is approximately 1.24 (prolate) and it has a rugulate pollen surface; (3) the Quercus sect. Quercus type is generally > 29 μm in size, has a P/E ratio of approximately 1.04, and a clearly verrucate pollen surface. Based on a comparison with modern pollen size and ornamentation, fossil pollen grains of the Quaternary Qinghai Lake core can be assigned to the Chinese southwest mountain oak group of Quercus sect. Ilex (in particular Quercus semecarpifolia). In addition, we show that the pollen percentages of Quercus rapidly increased to the highest level during the glacial period. Using SEM for the identification of fossil Quercus pollen grains is essential to ensure the accuracy of differentiating evergreen Quercus types (sect. Ilex versus sect. Cyclobalanopsis) during the last glacial period in southwest China.     

Comparative morphology of the first instar of three species of Metopia Meigen (Diptera: Sarcophagidae, Miltogramminae)

The first instar larva is described for three species of the kleptoparasitic miltogrammine genus Metopia Meigen: M. campestris (Fallén), M. argentata Macquart and M. argyrocephala (Meigen). Using a combination of light microscopy and scanning electron microscopy, the morphology of the cephaloskeleton as well as the general external morphology are extensively documented, and the phylogenetic implications are discussed. Like other species of Miltogramminae, the first instar of species of Metopia possesses a strong labrum and well‐developed mouth‐hooks. Some other features found in Metopia spp. are rare in the Miltogramminae, such as a serrated ventral surface of the tip of the mouth‐hook and the lack of a posterior spiracular cavity. A few larval features apparently unique for species of Metopia have so far been documented: base of mouth‐hook with a lateral arm‐like extension and abdominal segments with transverse furrow ventrally. The body is equipped with longitudinal cuticular ridges on all segments, which may be a subfamily ground‐plan autapomorphy. Marked morphological and behavioural differences are documented between the first instar of M. argentata and that of M. argyrocephala, the adult females of which are otherwise difficult to separate.     

Comparative pollen morphology of Glechoma and Marmoritis (Nepetinae,Lamiaceae)

Abstract The pollen morphology of 13 taxa (34 specimens) of the genera Glechoma L., and Marmoritis Benth. was investigated in detail using light, scanning electron, and transmission electron microscopy. Pollen grains of all studied taxa are small to large in size (P= 32.5–60.4 μm, E= 20.2–50.5 μm), prolate‐spheroidal to prolate in shape and mostly hexacolpate (the amb more or less circular or rarely ellipsoid) with granular membranes. The sexine ornamentation of Glechoma is bireticulate; the muri of the primary reticulum are irregularly circled, and lumen size is short. In contrast, the sexine surfaces of the Marmoritis pollen tend to more elongate or wider at the muri of the primary reticulum than those of the Glechoma. The pollen wall stratification of selected taxa (three from Glechoma and one from Marmoritis) is characterized by unbranched columellae, and continuous or distinctly discontinuous endexine based on transmission electron microscopy observation. The results of Glechoma and Marmoritis reveal rather similar pollen morphological features, however, fine details of sexine ornamentation are characteristic to differentiate the pollen taxa. Although these differences may be useful in establishing the taxonomic boundary between two genera, they are too weak to segregate diagnostic characters.     

Comparative pollen morphology of Glechoma and Marmoritis(Nepetinae,Lamiaceae)

The pollen morphology of 13 taxa(34 specimens)of the genera Glechoma L.,and Marmoritis Benth.was investigated in detail using light,scanning electron,and transmission electron microscopy.Pollen grains of all studied taxa are small to large in size(P = 32.5-60.4μm,E = 20.2-50.5μm),prolate-spheroidal to prolate in shape and mostly hexacolpate(the amb more or less circular or rarely ellipsoid)with granular membranes.The sexine ornamentation of Glechoma is bireticulate; the muri of the primary reticulum are irregularly circled,and lumen size is short.In contrast,the sexine surfaces of the Marmoritis pollen tend to more elongate or wider at the muri of the primary reticulum than those of the Glechoma.The pollen wall stratification of selected taxa(three from Glechoma and one from Marmoritis)is characterized by unbranched columellae,and continuous or distinctly discontinuous endexine based on transmission electron microscopy observation.The results of Glechoma and Marmoritis reveal rather similar pollen morphological features,however,fine details of sexine ornamentation are characteristic to differentiate the pollen taxa.Although these differences may be useful in establishing the taxonomic boundary between two genera,they are too weak to segregate diagnostic characters.     

Lip anatomy and its implications for the pollination mechanisms of Bulbophyllum species (Orchidaceae)

BACKGROUND AND AIMS: The lip structure of six Brazilian and one Asiatic species of Bulbophyllum with wind-assisted fly pollination (B. involutum, B. ipanemense and B. weddellii) and non-wind-assisted fly pollination (B. epiphytum, B. glutinosum, B. regnellii and B. rothschildianum) was studied to investigate the presence of secretory tissues related to these pollination mechanisms. METHODS: The lip study was carried out through scanning electron microscopy (lip surface) and light microscopy (anatomical features). KEY RESULTS: In most of the species studied, the osmophores (odour glands) were located in the lobes and in the upper surface of the lip callus. Differences in the lip structure were observed between the two groups (the presence of a nectary and the extent of osmophore surface), depending on the mechanism of pollination. Nectaries were found in the cavity callus in B. ipanemense, B. involutum and B. weddellii, even though their pollinators were presumably attracted by the instinct to oviposit. CONCLUSIONS: These findings corroborate the hypothesis that, because pollination in these species is dependent on an unpredictable external factor (wind), nectar is necessary to keep the insect in the flower for a long period. Despite the occurrence of a liquid-like nectar in the flowers of B. epiphytum, B. glutinosum, B. regnelli and B. rothschildianum, no anatomical evidence for nectaries was found in the lips of these species, although a similar structure may occur in another region of the flowers. This observation agrees with the fact that pollination by lip movement in the latter species requires only gravity, with no additional mechanism being needed to keep the flies in the flower.     

Aspects of reproductive ecology of Clusia valerioi Standl. and Clusia peninsulae Hammel (sp. nov.), two Central American species of Clusiaceae with resin flowers

Clusia valerioi Standl. and C. peninsulae Hammel, sp. nov. (formally established in the Appendix), two Central American species of Clusiaceae offering resin as a floral reward, were studied in the Piedras Blancas National Park, SW Costa Rica. Basic data on phenology, flower structure, course of anthesis, flower visitors, flower visitation and pollination processes, fruit development and seed dispersal are communicated. Resin collection and pollen release are reported and documented in greater detail. The significance of stingless bees for pollination is confirmed, but honeybees were also observed to visit the flowers and to collect resin. The seeds of C. valerioi, exhibiting a clearly ornithochorous character syndrome, were observed to be eaten and dispersed by four species of the tanager family (Thraupidae) and one species of finch (Fringillidae). Ants were also observed to carry away the seeds.     

Achene morphology of Saussurea species (Asteraceae,Cardueae) in Korea and its systematic implications

Achene size and shape, surface sculpturing, and pericarp and testa wall structure of 23 Korean Saussurea spp. were investigated using scanning electron microscopy (SEM) and light microscopy to evaluate the infrageneric relationships and assess their systematic significance. Achene size categories and thickness of the testa epidermis were distinguished using biometric measurements. Four basic types of surface pattern were observed: (1) lineate; (2) striate; (3) reticulate; and (4) colliculate. Saussurea rorinsanensis was found to have some unique achene characteristics, such as a fusiform achene, uniform pappus, presence of epidermal hairs and tangentially elongated, narrow testa epidermal cells. The characteristic achene features for species were found to be achene size and shape, hilum position, surface sculpture, pappus composition, morphology of the pericarp wall and thickness of the testa epidermis. Based on 16 morphological and achene characters, a cladistic analysis resolved three well‐supported clades, with S. eriophylla as the first‐branching taxon. Saussurea pulchella and S. japonica, both belonging to Saussurea subgenus Theodorea, were distant from each other in the 50% majority rule consensus tree and the character distribution cladogram. This cladistic analysis of achene morphology and anatomy should be regarded as giving us a tentative picture of the phylogenetics of Saussurea, and this study may serve as a reference for future hypotheses and studies on the characterization and classification of Saussurea spp. in Korea.     

10种金花茶组植物的花粉形态及分类学意义

金花茶组(Sect.Chrysantha)植物具有很高的观赏价值,但其分类存在争议.为探讨金花茶组植物花粉的形态特征和分类学意义,该研究用扫描电镜观察了10种金花茶的花粉形状、外壁纹饰以及穿孔特征,统计了极轴长、赤道轴长和萌发沟长,并进行聚类分析.结果表明:(1)10种供试金花茶植物花粉为中粒花粉,大部分花粉形状呈近球...     

Three groups of species in Petunia sensu Jussieu (Solanaceae) inferred from the intact seed

The intact seed surface morphology in 45 taxa of Petunia sensu Jussieu native to South America (Petunia sensu Wijsman plus Calibrachoa) was compared under scanning electron microscopy. The existence of three groups of species, differentiated in terms of seed morphology, was revealed as follows: (1) all species of Petunia sensu Wijsman, having coarse wavy middle lamellae and anticlinal walls; (2) Calibrachoa parviflora and C. pygmaea, having fine wavy middle lamellae embedded in straight anticlinal walls; and (3) the other species of Calibrachoa, having straight middle lamellae and anticlinal walls. Close relationships between seed morphology and the other characteristics observable in the groups of species are discussed.     

Stigma morphology in Aylostera subg. Mediolobivia (Cactaceae) and its importance for systematic investigation

The stigma of 31 taxa of Aylostera (Cactaceae) was studied using environmental scanning electron microscopy. Seven stigma types could be defined, based on the degree of fusion of the stigmatic lobes and, when these are completely separated (types I and II), their orientation. Four types (types IV, V, VI and VII) are present only in Aylostera subg. Mediolobivia, two of which (types IV and VII) are species-specific. Stigma morphology was found to be a good diagnostic character in Aylostera subg. Mediolobivia, allowing in some cases to distinguish species that had been confused previously. The stigmatic types here defined seem apt to characterize natural groups within the subgenus and are useful as an aid for species identification and the characterization of new taxa.     

Comparative study of pollination biology of two closely related alpine Primula species,namely Primula beesiana and P. bulleyana (Primulaceae)

Abstract The comparative pollination biology of a population of Primula beesiana, a population of P. bulleyana, and an overlapping population of these two species in Yulong Shan, Yunnan Province, China, was studied in 2004 and 2005. The results indicate that both P. beesiana and P. bulleyana are typical heterostylous and obligate outcrossing species; the main pollinators of the two species were bees and butterflies. At the sites of all three populations, the main pollinating visitors of the two species showed preference for one of the two species, resulting in the ethological isolation of the two species by the pollinators. This ethological isolation contributes to the reproductive isolation of the two species, which supports the hypothesis that P. beesiana and P. bulleyana are two distinct species. The reproductive isolation of the two species (ethological isolation) is probably an important mechanism in maintaining species boundaries in the genus and has contributed to the species diversification of Primula in the area. In addition, gene exchanges between P. beesiana and P. bulleyana has occurred to some extent in the overlapping population, but whether natural hybridization has contributed to species diversification in Primula remains to be determined.     

Comparative study of pollination biology of two closely related alpine Primula species,namely Primula beesiana and P.bulleyana (Primulaceae)

The comparative pollination biology of a population of Primula beesiana,a population of P.bulleyana,and an overlapping population of these two species in Yulong Shan,Yunnan Province,China,was studied in 2004 and 2005.The results indicate that both P.beesiana and P.bulleyana are typical heterostylous and obligate outcrossing species;the main pollinators of the two species were bees and butterflies.At the sites of all three populations,the main pollinating visitors of the two species showed preference for one...     

Seed coat morphology and its systematic significance in Juncus L. (Juncaceae)in Egypt

The seed morphology of nine taxa of Juncus from Egypt has been investigated using light and scanning electron microscopy,to determine the importance of seed coat features as taxonomic characters.Macro-and micromorphological characters,including seed shape,color,size,seed appendages,epidermal cell shape,anticlinal boundaries,and outer periclinal cell wall and secondary cell wall sculpture are presented.Four types of seed appendages are recognized:(i)seeds with two appendages;(ii)seeds without appendages;(iii)seeds with minutely a piculate at one end;and(iv)seeds with minutely a piculate at both ends.Two types of anticlinal cell wall boundaries,(i)raised-channeled,straight and(ii)raised,straight or sinuous,and three different shapes of outer periclinal cell wall are described:(i)flat;(ii)concave;and(iii)flat to slightly concave.The secondary sculpture of the cell wall varies from striate to microreticulate or reticulate,and smooth to finely folded.Seed characters provide useful data for formulating the taxonomy of Juncus both on the subgeneric and sectional level.A key for the identification of the investigated taxa based on seed characters is provided.     

Seed coat morphology and its systematic significance in Juncus L. (Juncaceae) in Egypt

The seed morphology of nine taxa of Juncus from Egypt has been investigated using light and scanning electron microscopy, to determine the importance of seed coat features as taxonomic characters. Macro- and micromorphological characters, including seed shape, color, size, seed appendages, epidermal cell shape, anticlinal boundaries, and outer periclinal cell wall and secondary cell wall sculpture are presented. Four types of seed appendages are recognized: (i) seeds with two appendages; (ii) seeds without appendages; (iii) seeds with minutely a piculate at one end; and (iv) seeds with minutely a piculate at both ends. Two types of anticlinal cell wall boundaries,(i) raised-channeled, straight and (ii) raised, straight or sinuous, and three different shapes of outer periclinal cell wall are described: (i) flat; (ii) concave; and (iii) flat to slightly concave. The secondary sculpture of the cell wall varies from striate to microreticulate or reticulate, and smooth to finely folded. Seed characters provide useful data for formulating the taxonomy of Juncus both on the subgeneric and sectional level. A key for the identification of the investigated taxa based on seed characters is provided.