Developmental stages of the pollen wall and tapetum in some Crocus species

The developmental stages of the pollen wall and tapetum, together with exine morphology were studied in a number of Crocus species, by light and scanning electron microscopy. Gametogenesis was characterized by: 1) development of a thick intine, 2) single mitosis, and 3) terminal amylolysis. The tapetum was of the secretory type. In C. cartwrightianus cv. albus, abnormal sporogenesis and gametogenesis produced vacuolate pollen grains with a reduced-or no intine layer, and rich with starch granules; the tapetum was either of the parietal-or amoeboid type. The exine was echinate and the pollen grains had different types of aperture: furrows, colpi or pores. The ornamentation varied from microreticulate to irregularly perforate. The exine framework was overlaid by a pellicle resistant to chloroform-carbon disulphide, on which a layer of pollenkitt was deposited. The results are discussed from both cytological and evolutionary viewpoints.     

蓼属-未知花粉类型外壁超微结构的研究

花粉壁的构造提供了若干在系统发育上有用的特征,其中外壁的层次、结构以及纹饰是基本的。为此,本文以花粉壁的外部纹饰和内部结构为重点,用扫描电镜（ＳＥＭ）和透射电镜（ＴＥＭ）的薄切片技术,对蓼属一新的花粉类型－－长花蓼型的花粉外壁构造的特点进行了观察和研究。结果表明：外壁结构分化成两个明显的层次,即外面的外壁外层以及内面的外壁内层,其外壁外层无覆盖层,仅由柱状层和底层组成的。     

杉木花粉发育过程中形态结构的变化研究

该研究以扬州地区成年杉木为材料,采用半薄切片法以及扫描电镜和透射电镜观察法,对杉木花粉发育过程进行了观察。结果表明:杉木的造孢细胞形成于10月,持续至翌年的1月底至2月初。造孢细胞位于小孢子囊最里面,呈多边形,数量多且彼此排列紧密;细胞壁很薄,细胞核较大,内含丰富的细胞器和脂类物质。造孢细胞发育成熟后彼此分离形成小孢子母细胞。小孢子母细胞的减数分裂开始于2月下旬,经两次减数分裂,先后形成二分染色体和四分染色体。小孢子从四分体释放后,体积迅速增大,发育形成花粉,这个过程中,伴随着明显的营养物质变化。杉木成熟花粉壁由薄壁区和厚壁区两部分组成,薄壁区中央有一个乳头状突起,突起上有一萌发孔。成熟花粉外壁着生了许多瘤状颗粒。该研究结果为杉木生殖发育、有性繁殖以及系统演化研究提供了重要依据。     

Morphology of pollen and orbicules in some Dioscorea species and its systematic implications

Pollen and orbicule morphology of 35 Dioscorea L. species is described based on observations with light microscopy, and scanning and transmission electron microscopy. Pollen and orbicule characters are critically evaluated and discussed in the context of existing hypotheses of systematic relationships within the genus. Pollen is mostly bisulcate (sometimes monosulcate) with a perforate, microreticulate or striate sexine. Our results indicate that pollen data may be significant at sectional rank. The close relationship between sections Asterotricha and Enantiophyllum proposed by Burkill and Ayensu is supported by pollen morphology as all species investigated share bisulcate, perforate pollen with small perforations and a high perforation density. Macromorphological differences between the two compound-leaved sections Botryosicyos and Lasiophyton are also supported by pollen morphology; pollens of these two sections have very different perforation patterns. Orbicules in Dioscorea are mostly spherical and possess a smooth or spinulose surface. The latter is often correlated with a striate sexine.     

扇脉杓兰花粉超微结构及花粉管生长的观察

为明确扇脉杓兰花粉形态结构及雄性生殖特性,利用扫描电镜、透射电镜和荧光显微镜对花粉形态和超微结构及花粉管生长过程进行观察。结果表明:(1)扇脉杓兰单粒花粉长球形,表面光滑无特征纹饰,有少量胶黏物质,一些表面有2个或以上的深凹陷,凹陷内有球形突起的内容物。(2)花粉壁分为由棒状的基柱小单元组成的外壁和纤维素果胶组成的内壁,有覆盖层;生殖细胞近圆形,细胞核大而致密;营养细胞多弧形,核质分散;花粉粒细胞质含有大量的线粒体、质体和小泡等细胞器,淀粉、蛋白质和多糖含量丰富。(3)花粉管萌发后沿子房壁方向伸长,授粉20d花粉管伸长生长并不明显,授粉30d伸长的花粉管中出现大量胼胝质塞,并且伸长方向转为胚珠中间,花粉管逐渐接近胚珠,在授粉后50d基本完成受精作用。研究认为,扇脉杓兰花粉发育正常,不阻碍有性生殖过程。     

The systematic value of pollen morphology in Smilacaceae

Smilacaceae are a small family of dioecious, mostly climbing, net-veined monocotyledons with a cosmopolitan distribution. Relatively little is known about the variation of pollen morphology within the family. For this reason, and to investigate the systematic value of palynology in Smilacaceae, pollen from 125 species of Smilax, Heterosmilax, and Ripogonum was examined using light and scanning electron microscopy. Ten of these were examined further by transmission electron microscopy. Four distinct pollen types grouped into two major pollen classes were distinguished: Class 1, represented by the pollen of all Smilax and Heterosmilax species, is mostly spheroidal, inaperturate, and spinulate or microspinulate, with a thin, fragile exine of varied sculpturing; three pollen types are represented within this class. Class 2 is found only in Ripogonum and contains a single pollen type with prolate, monosulcate, reticulately-sculptured pollen. The unique pollen morphology of Ripogonum supports its removal from Smilacaceae. In contrast, the characteristics of Heterosmilax pollen intergrade with those seen in Smilax, suggesting that the former might be better reduced to synonymy with the latter. A key to the identification of these pollen types is presented along with a discussion of geographic and possible evolutionary trends among them.     

Pollen morphology and structure of Zingiber (Zingiberaceae)

The aim of the present study is to describe the morphology and internal wall structure of Zingiber pollen. The pollen of 18 species of Zingiber was examined by light, scanning and transmission electron microscopy. In the sections Zingiber and Dymczewiczia (Horan.) Benth. the pollen grains are spherical with cerebroid sculpturing while in the section Cryptanthium Horan. the pollen is ellipsoid with spira-striate sculpturing. All species have a thin coherent exine and an intine consisting of a thick, radially channeled outer layer and a thin, finely granular inner layer. On the basis of pollen morphology it is proposed that the section Dymczeniczia is included in the section Zingiber. The structure of the pollen wall in Zingiber resembles that of Canna and Strelitzia in having a pollen wall offering an infinite number of germination sites.     

Comparative pollen morphology of Glechoma and Marmoritis (Nepetinae,Lamiaceae)

Abstract The pollen morphology of 13 taxa (34 specimens) of the genera Glechoma L., and Marmoritis Benth. was investigated in detail using light, scanning electron, and transmission electron microscopy. Pollen grains of all studied taxa are small to large in size (P= 32.5–60.4 μm, E= 20.2–50.5 μm), prolate‐spheroidal to prolate in shape and mostly hexacolpate (the amb more or less circular or rarely ellipsoid) with granular membranes. The sexine ornamentation of Glechoma is bireticulate; the muri of the primary reticulum are irregularly circled, and lumen size is short. In contrast, the sexine surfaces of the Marmoritis pollen tend to more elongate or wider at the muri of the primary reticulum than those of the Glechoma. The pollen wall stratification of selected taxa (three from Glechoma and one from Marmoritis) is characterized by unbranched columellae, and continuous or distinctly discontinuous endexine based on transmission electron microscopy observation. The results of Glechoma and Marmoritis reveal rather similar pollen morphological features, however, fine details of sexine ornamentation are characteristic to differentiate the pollen taxa. Although these differences may be useful in establishing the taxonomic boundary between two genera, they are too weak to segregate diagnostic characters.     

New views of tapetum ultrastructure and pollen exine development in Arabidopsis thaliana

Background and Aims

The Arabidopsis thaliana pollen cell wall is a complex structure consisting of an outer sporopollenin framework and lipid-rich coat, as well as an inner cellulosic wall. Although mutant analysis has been a useful tool to study pollen cell walls, the ultrastructure of the arabidopsis anther has proved to be challenging to preserve for electron microscopy.

Methods

In this work, high-pressure freezing/freeze substitution and transmission electron microscopy were used to examine the sequence of developmental events in the anther that lead to sporopollenin deposition to form the exine and the dramatic differentiation and death of the tapetum, which produces the pollen coat.

Key Results

Cryo-fixation revealed a new view of the interplay between sporophytic anther tissues and gametophytic microspores over the course of pollen development, especially with respect to the intact microspore/pollen wall and the continuous tapetum epithelium. These data reveal the ultrastructure of tapetosomes and elaioplasts, highly specialized tapetum organelles that accumulate pollen coat components. The tapetum and middle layer of the anther also remain intact into the tricellular pollen and late uninucleate microspore stages, respectively.

Conclusions

This high-quality structural information, interpreted in the context of recent functional studies, provides the groundwork for future mutant studies where tapetum and microspore ultrastructure is assessed.     

Cupressus arizonica pollen wall zonation and in vitro hydration

The structure of Cupressus arizonica pollen at different degrees of hydration was examined by using cytochemical staining and light (LM) and scanning electron (SEM) microscopy. Most pollen grains are inaperturate and a minority are provided with an operculate pore enveloped by a concave annulus. Intine consists of: 1) a thin polysaccharidic outer layer, 2) a large polysaccharidic middle layer that is spongy and bordered by a mesh of large and branched fibrils, and 3) an inner cellulosic thick layer with callose concentrated on the inner side, which forms a shell around the protoplast. The protoplast is egg-shaped with PAS positive cytoplasm and prominent nucleus. Exine splits during hydration and is cast off according to three major steps: 1) the split opens like a mouth and the underlying intine is expelled by swelling like a balloon, 2) the protoplast enveloped by the inner intine is sucked in the outgrowing side, and 3) the backside of the intine gets rid of the exine shell. In water containing salts, exine is rapidly released and the middle intine may expand up to break the outer layer, with disgregation of the spongy material and release of the intine shell including the protoplast. In water lacking salts, the sporoderm hydration and breaking are negatively influenced by the population effect. Pollen when air dried after the exine release become completely flat owing to disappearance of the middle intine layer which may be restored by dipping pollen in water. The results are discussed in relation to the functional potentialities of the sporoderm.     

Comparative pollen morphology of Brachylena, Tarchananthus and two species of Tubulifloridites (Asteraceae) from the Eocene, Knysna Lignite of South Africa

Two fossil taxa Tubulifloridites antipodica and T. viteauensis recovered from the Eocene Knysna Lignite of South Africa were examined with scanning (SEM) and transmission electron microscopy (TEM). The details of their sculpturing and wall structure are similar to the same species of fossil dispersed pollen taxa recovered from southwestern Africa and South America. Fifteen species of the woody South African taxa, Brachylaena (9 species) and Tarchonanthus (6 species) were investigated with SEM and TEM. All of the taxa are tricolporate, spherical to slightly prolate, microechinate to echinate and have a bilayered columellate infrastructure, except B.ilicifolia, which has a single columellate infrastructural level with the “granularization” of the outer portion of the infrastructural layer or the inner layer of the tectum. There is a similar distribution of plesiomorphic and derived pollen characters in a number of aster subfamilies and tribes suggesting a similar evolutionary progression of pollen, and pollen wall character evolution was occurring synchronously in a variety of aster subfamilies during the middle Tertiary and that these unique pollen features may be important to the evolution and diversification of the Asteraceae.     

Development of the echinate pollen wall inFarfugium japonicum (Compositae: Senecioneae)

Development of the echinate pollen grains inFarfugium (Compositae: Senecioneae) has been studied by a combination of transmission electron microscopy and field emission scanning electron microscopy with a freeze fractured method. The inner surface of the callose wall surrounding each microspore does not possess an echinate pattern before primexine deposition begins. The primexine formation coincides with the initiation of spines. The freeze fractured primexine shows probacula which form transverse rods. The developing exine has an inner spongy substructure. The endexine is formed by the accumulation of the electron dense lamellae with white lines after the dissolution of the callose wall. In the present study, it is confirmed that the developmental process of pollen formation revealed in the field emission scanning electron microscope is consistent with the results obtained using the transmission electron microscope.     

The remarkable genus<Emphasis Type="Italic"> Coptosapelta</Emphasis> (Rubiaceae): pollen and orbicule morphology and systematic implications

The pollen morphology and distribution of orbicules were investigated in ten species of the genus Coptosapelta (Rubiaceae) using light, scanning electron and transmission electron microscopy. In general, Coptosapelta pollen is three- to five-pororate and suboblate to oblate-spheroidal. The sexine ornamentation varies from psilate to reticulate, and the pollen-wall stratification lacks columellae. Droplets are observed on the inner nexine surface. Distinct orbicules are found in five species. Orbicules are often lobed and appear to be aggregated and embedded in the tapetal remnants of the locule wall. Ultrastructurally, a single, flattened core is frequently observed. Coptosapelta has a unique pollen type within Rubiaceae and does not resemble possibly related genera. Pollen characteristics provide additional evidence supporting earlier findings that Coptosapelta represents an isolated lineage in Rubiaceae.     

The wall ofPinus sylvestris L. pollen tubes

Summary The wall ofPinus sylvestris pollen and pollen tubes was studied by electron microscopy after both rapid-freeze fixation and freeze-substitution (RF-FS) and chemical fixation. Fluorescent probes and antibodies (JIM7 and JIM5) were used to study the distribution of esterified pectin, acidic pectin and callose. The wall texture was studied on shadow-casted whole mounts of pollen tubes after extraction of the wall matrix. The results were compared to current data of angiosperms. TheP. sylvestris pollen wall consists of a sculptured and a nonsculptured exine. The intine consists of a striated outer layer, that stretches partly over the pollen tube wall at the germination side, and a striated inner layer, which is continuous with the pollen tube wall and is likely to be partly deposited after germination. Variable amounts of callose are present in the entire intine. No esterified pectin is detected in the intine and acidic pectin is present in the outer intine layer only. The wall of the antheridial cell contains callose, but no pectin is detectable. The wall between antheridial and tube cell contains numerous plasmodesmata and is bordered by coated pits, indicating intensive communication with the tube cell. Callose and esterified pectin are present in the tip and the younger parts of the pollen tubes, but both ultimately disappear from the tube. Sometimes traces in the form of bands remain present. No acidic pectin is detected in either tip or tube. The wall of the pollen tube tip has a homogenous appearance, but gradually attains a fibrillar character at aging, perhaps because of the disappearance of callose and pectin. No secondary wall formation or callose lining can be seen wilh the electron microscope. The densily of the cellulose microfibrils (CMF) is much lower in the tip than in the tube. Both show CMF in all but axial and nontransverse orientations. In conclusion,P. sylvestris and angiosperm pollen tubes share the presence of esterified pectin in the tip, the oblique orientations of the CMF, and the gradual differentiation of the pollen tube wall, indicating a possible relation to tip growth. The presence of acidic pectin and the deposition of a secondary-wall or callose layer in angiosperms but not inP. sylvestris indicales that these characteristics are not related to tip growth, but probably represent adaptations to the fast and intrastylar growth of angiosperms.Abbreviations CMF cellulose microfibrils - II inner intine - NE nonsculptured exine - OI outer intine - RF-FS rapid-freeze fixation freeze-substitution - SE sculptured exine - SER smooth endoplasmic reliculum - SV secretory vesicles     

Location of cellulose and callose in pollen tubes and grains of Nicotiana tabacum

The distribution of cellulose and callose in the walls of pollen tubes and grains of Nicotiana tabacum L. was examined by electron microscopy using gold-labelled cellobiohydrolase for cellulose and a (1,3)-β-D-glucan-specific monoclonal antibody for callose. These probes provided the first direct evidence that cellulose co-locates with callose in the inner, electron-lucent layer of the pollen-tube wall, while both polymers are absent from the outer, fibrillar layer. Neither cellulose nor callose are present in the wall at the pollen-tube tip or in cytoplasmic vesicles. Cellulose is first detected approximately 5–15 μm behind the growing tube tip, just before a visible inner wall layer commences, whereas callose is first observed in the inner wall layer approximately 30 μm behind the tip. Callose was present throughout transverse plugs, whereas cellulose was most abundant towards the outer regions of these plugs. This same distribution of cellulose and callose was also observed in pollen-tube walls of N. alata Link et Otto, Brassica campestris L. and Lilium longiflorum Thunb. In pollen grains of N. tabacum, cellulose is present in the intine layer of the wall throughout germination, but no callose is present. Callose appears in grains by 4 h after germination, increasing in amount over at least the first 18 h, and is located at the interface between the intine and the plasma membrane. This differential distribution of cellulose and callose in both pollen tubes and grains has implications for the nature of the β-glucan biosynthetic machinery. Received: 20 February 1988 / Accepted: 25 March 1998     

Cosmos pollen ontogeny: A scanning electron microscope study

Summary Ontogenetic data concerning pollen not only clarifies the mode of deposition of the elaborate walls but has considerable functional and taxonomic relevance. Hitherto such studies have used optical or transmission electron microscopy but here a recently devised preparative technique has enabled pollen development inCosmos bipinnatus to be studied using the scanning electron microscope. The technique involves freeze-fracturing of osmium fixed, cryoprotected anthers, maceration in dilute osmium tetroxide, critical point drying, sputter coating and examination. The processes of pollen wall development can then be observed in three dimensions, an important aid to understanding the spatial relationships involved in the determination of ornamentation and apertures. Details of the pollen and tapetum are described at various stages between meiosis and anthesis. A close conformity is demonstrated between the results obtained and those of earlier transmission electron microscopic studies of the same and related species although very different interpretations are made.     

Pollen morphology and ultrastructure of selected species of Magnoliaceae

The pollen morphology and ultrastructure of 20 species, representing eight genera of the Magnoliaceae are described based on observations with light, scanning and transmission electron microscopy. The family represents a homogeneous group from a pollen morphological point of view. The pollen grains are boat-shaped with a single elongate aperture on the distal face. The tectum is usually microperforate, rarely slightly or coarsely rugulose. Columellae are often irregular, but well-developed columellae do occur in some taxa. The endexine is distinct in 14 species, but difficult to discern in the genera Parakmeria, Kmeria and Tsoongiodendron. Within the aperture zone the exine elements are reduced to a thin foot layer. The intine has three layers with many vesicular-fibrillar components and tubular extensions in intine 1. The symmetry of the pollen grains, shape, type of aperture and ultrastructure of the intine show a remarkable uniformity in the family. Nevertheless there is variety in pollen size, ornamentation and the ultrastructure of the exine. The pollen of Magnoliaceae is an example of an early trend of specialization, and supports the view that Magnoliaceae are not one of the earliest lines in the phylogeny of flowering plants.     

Water-conducting properties of lipids during pollen hydration

Based on the authors’ previous work an attempt has been made to study water flow in the lipid matrix during pollen hydration. The present study has demonstrated that in the presence of small amounts of water, the type of lipids used defined the time of hydration of pollen in vivo on the stigma and in vitro. Several approaches were used including cryo‐scanning electron microscopy, magnetic resonance imaging and Fourier transform infrared microspectroscopic imaging, with the purpose of detecting very small amounts of water. The results show that no water is detectable in the lipid matrix. It was observed and concluded that the water for pollen hydration accumulates as a thin layer at the contact side between pollen and stigma, during the normal process of pollination in plant species with a wet stigma. However, using the same species deprived of the stigma by cell ablation, it was shown that the layer of water observed in wild‐type plants is not necessary for pollen hydration.     

Notes on the morphology and fine structure of the exine of some pollen types in dipterocarpaceae

The pollen morphology of nine species belonging to six genera of Dipterocarpaceae is described in detail with light, scanning electron and transmission electron microscopy, while additional data on twenty-eight species are briefly discussed. In Dipterocarpoideae, grains are tricolpate and the exine consists of a thin, often laminated basal layer and an outer, sculptured layer in which columellae and tectum may either be recognizable or fused into a tilioid structure. The surface of the tectal ridges often show a highly characteristic grooved or crenelated microsculpture. In Monotoideae the grains are tricolporate and four layers can be recognized, the inner two being probably equivalent to endexine s.s. and footlayer, the outer two forming a fairly coarse tilioid reticulate sculpture.The evolutionary relations between the pollen types and their relations to taxonomy, wood anatomy and fruit morphology are discussed. A fair amount of correspondence is obvious, although discrepancies, especially with anatomical evidence, exist also.     

Ultrastructure and germination of Vitis vinifera cv. Loureiro pollen

The cultivar Loureiro of Vitis vinifera is one of the most economically important, recommended in almost the totality of the Regi?o Demarcada dos Vinhos Verdes. In vineyards, the grape productivity of this cultivar is normal while in others it is extremely low. The aim of this work was to study the morphology and germination of Vitis vinifera cv. Loureiro pollen with high and low productivity. The pollen grain was examined under light, transmission and scanning electron microscopy. Typically V. vinifera pollen present three furrows but in the cultivar Loureiro we found tricolporated and acolporated (without furrows or pores) pollen grains. Both pollen types present generative and vegetative cells with the usual aspect and a dense cytoplasm rich in organelles. In the acolporated pollen a continuous exine layer and an irregular intine layer were observed. Differences were found in the starch accumulation, since only in tricolporated pollen abundant plastids filled with numerous starch granules were observed. To determine the causes of the low productivity of this cultivar we tested pollen viability by the fluorochromatic reaction and pollen germinability by in vitro assays. We observed that the acolporated pollen grain is viable, but no germination was recorded.