An essential role for the C-terminal domain of a dragline spider silk protein in directing fiber formation

We have employed baculovirus-mediated expression of the recombinant A. diadematus spider dragline silk fibroin rADF-4 to explore the role of the evolutionary conserved C-terminal domain in self-assembly of the protein into fiber. In this unique system, polymerization of monomers occurs in the cytoplasm of living cells, giving rise to superfibers, which resemble some properties of the native dragline fibers that are synthesized by the spider using mechanical spinning. While the C-terminal containing rADF-4 self-assembled to create intricate fibers in the host insect cells, a C-terminal deleted form of the protein (rADF-4-DeltaC) self-assembled to create aggregates, which preserved the chemical stability of dragline fibers, yet lacked their shape. Interestingly, ultrastructural analysis showed that the rADF-4-DeltaC monomers did form rudimentary nanofibers, but these were short and crude as compared to those of rADF-4, thus not supporting formation of the highly compact and oriented "superfiber" typical to the rADF-4 form. In addition, using thermal analysis, we show evidence that the rADF-4 fibers but not the rADF-4-DeltaC aggregates contain crystalline domains, further establishing the former as a veritable model of authentic dragline fibers. Thus, we conclude that the conserved C-terminal domain of dragline silk is important for the correct structure of the basic nanofibers, which assemble in an oriented fashion to form the final intricate natural-like dragline silk fiber.     

Energetics of the actomyosin bond in the filament array of muscle fibers.

The interaction between actin and myosin in the filament array of glycerinated muscle fibers has been monitored using paramagnetic probes and mechanical measurements. Both fiber stiffness and the spectra of probes bound to a reactive sulfydral on the myosin head were measured as the actomyosin bond was weakened by addition of magnesium pyrophosphate (MgPPi) and glycerol. In the absence of MgPPi, all myosin heads are attached to actin with oriented probes. When fibers were incubated in buffers containing MgPPi, a fraction of the probes became disordered, and this effect was greater in the presence of glycerol. To determine whether the heads with disordered probes were detached from actin, spin-labeled myosin subfragment-1 (MSL-S1) was diffused into unlabeled fibers, and the fractions bound to actin and free in the medium were correlated with the oriented and disordered spectral components. These experiments showed that the label was oriented when MSL-S1 was attached to actin in a ternary complex with the ligand and that all heads with disordered probes were detached from actin. Thus the fraction of oriented labels could be used to determine the fraction of heads attached to actin in a fiber in the presence of ligand. The fraction of myosin heads attached to actin decreased with increasing [MgPPi], and in the absence of glycerol approximately 50% of the myosin heads were dissociated at 3.3 mM ligand with little change in fiber stiffness. In the presence of 37% glycerol plus ligand, up to 80% of the heads could be detached with a 50% decrease in fiber stiffness. The data indicate that there are two populations of myosin heads in the fiber. All the data could be fit with a model in which one population of myosin heads (comprising approximately 50% of the total) sees an apparent actin concentration of 0.1 mM and can be released from actin with little change in fiber stiffness. A second population of myosin heads (approximately 50%) sees a higher actin concentration (5 mM) and is only released in the presence of both glycerol and ligand.     

Fabrication and optimization of methylphenoxy substituted polyphosphazene nanofibers for biomedical applications

Electrospinning has developed as a unique and versatile process to fabricate ultrathin fibers in the form of nonwoven meshes or as oriented arrays from a variety of polymers. The very small dimension of these fibers can generate a high surface area, which makes them potential candidates for various biomedical and industrial applications. The objective of the present study was to develop nanofibers from polyphosphazenes, a class of inorganic-organic polymers known for high biocompatibility, high-temperature stability, and low-temperature flexibility. Specifically, we evaluated the feasibility of developing bead-free nonwoven nanofiber mesh from poly[bis(p-methylphenoxy)phosphazene] (PNmPh) by electrospinning. The effect of process parameters such as nature of solvent, concentration of the polymer solution, effect of needle diameter, and applied potential on the diameter and morphology (beaded or bead-free) of resulting nanofibers were investigated. It was found that solution of PNmPh in chloroform at a concentration range of 7% (wt/v) to 9% (wt/v) can be readily electrospun to form bead-free fibers at room temperature. The mean diameter of the fibers obtained under optimized spinning condition was found to be approximately 1.2 microm. The bead-free, cylindrical nanofibers formed under the optimized condition showed a slightly irregular surface topography with indentations of a few nanometer scale. Further, the electrospun nanofiber mats supported the adhesion of bovine coronary artery endothelial cells (BCAEC) as well as promoted the adhesion and proliferation of osteoblast like MC3T3-E1 cells.     

Fabrication,Characterization and Cellular Compatibility of Poly(Hydroxy Alkanoate) Composite Nanofibrous Scaffolds for Nerve Tissue Engineering

Tissue engineering techniques using a combination of polymeric scaffolds and cells represent a promising approach for nerve regeneration. We fabricated electrospun scaffolds by blending of Poly (3-hydroxybutyrate) (PHB) and Poly (3-hydroxy butyrate-co-3- hydroxyvalerate) (PHBV) in different compositions in order to investigate their potential for the regeneration of the myelinic membrane. The thermal properties of the nanofibrous blends was analyzed by differential scanning calorimetry (DSC), which indicated that the melting and glass temperatures, and crystallization degree of the blends decreased as the PHBV weight ratio increased. Raman spectroscopy also revealed that the full width at half height of the band centered at 1725 cm⁻¹ can be used to estimate the crystalline degree of the electrospun meshes. Random and aligned nanofibrous scaffolds were also fabricated by electrospinning of PHB and PHBV with or without type I collagen. The influence of blend composition, fiber alignment and collagen incorporation on Schwann cell (SCs) organization and function was investigated. SCs attached and proliferated over all scaffolds formulations up to 14 days. SCs grown on aligned PHB/PHBV/collagen fibers exhibited a bipolar morphology that oriented along the fiber direction, while SCs grown on the randomly oriented fibers had a multipolar morphology. Incorporation of collagen within nanofibers increased SCs proliferation on day 14, GDNF gene expression on day 7 and NGF secretion on day 6. The results of this study demonstrate that aligned PHB/PHBV electrospun nanofibers could find potential use as scaffolds for nerve tissue engineering applications and that the presence of type I collagen in the nanofibers improves cell differentiation.     

Fabrication and characterization of electrospun chitosan nanofibers formed via templating with polyethylene oxide

Chitosan is an abundantly common, naturally occurring, polysaccharide biopolymer. Its biocompatible, biodegradable, and antimicrobial properties have led to significant research toward biological applications such as drug delivery, artificial tissue scaffolds for functional tissue engineering, and wound-healing dressings. For applications such as tissue scaffolding, formation of highly porous mats of nanometer-sized fibers, such as those fabricated via electrospinning, may be quite important. Previously, strong acidic solvents and blending with synthetic polymers have been used to achieve electrospun nanofibers containing chitosan. As an alternative approach, in this work, polyethylene oxide (PEO) has been used as a template to fabricate chitosan nanofibers by electrospinning in a core-sheath geometry, with the PEO sheath serving as a template for the chitosan core. Solutions of 3 wt % chitosan (in acetic acid) and 4 wt % PEO (in water) were found to have matching rheological properties that enabled efficient core-sheath fiber formation. After removing the PEO sheath by washing with deionized water, chitosan nanofibers were obtained. Electron microscopy confirmed nanofibers of approximately 250 nm diameter with a clear core-sheath geometry before sheath removal, and chitosan nanofibers of approximately 100 nm diameter after washing. The resultant fibers were characterized with IR spectroscopy and X-ray diffraction, and the mechanical and electrical properties were evaluated.     

Orientation of spin-labeled nucleotides bound to myosin in glycerinated muscle fibers.

Electron paramagnetic resonance (EPR) spectroscopy of paramagnetic derivatives of ATP has been used to probe the angular distribution of myosin in glycerinated muscle fibers. Three nucleotide spin labels have been prepared with the nitroxide free radical moiety attached, via an ester linkage to either: the 2' or 3' positions of the ribose unit of ATP (SL-ATP), the 2' position of 3' deoxy ATP (2'SL-dATP), or the 3' position of 2' deoxy ATP (3'SL-dATP). In muscle fibers, these nucleotides are quickly hydrolyzed to their diphosphate forms. All three diphosphate analogues bind to the nucleotide site of myosin with similar affinities: rabbit psoas fibers, 7 X 10(3)/M; insect flight muscle, 5 X 10(3)/M; and rabbit soleus muscle, 2 X 10(4)/M. Analysis of the spectra showed that the principal z-axis of the nitroxide attached to bound nucleotides was oriented with respect to the filament axis. The principal axes of 3'SL-dADP and 2'SL-dADP appeared to be preferentially aligned at mean angles of 67 degrees +/- 4 degrees and 55 degrees +/- 5 degrees, respectively. The distribution of probes about these angles can be described by Gaussians with widths of 16 degrees +/- 4 degrees and 13 degrees +/- 5 degrees, respectively. The spectrum of bound SL-ADP was a linear combination of the spectra of the two deoxy analogues. These orientations were the same in the three muscle types examined, indicating a high degree of homology in the nucleotide binding site. Applying static strains as high as 0.2 N/mm2 to muscle fibers caused no change in the orientation of myosin-bound, spin-labeled nucleotides. When muscle fibers were stretched to decrease actin and myosin filament overlap, bound SL-ADP produced EPR spectra indicative of probes with a highly disordered angular distribution. Sodium vanadate and SL-ATP caused fiber stiffness to decrease, and the EPR spectrum of the bound analogue indicated an increase in the fraction of disoriented probes with a concomitant decrease in the fraction of oriented probes. These findings indicate that when myosin is bound to actin its nucleotide site is highly oriented relative to the fiber axis, and when this interaction is removed the orientation of the nucleotide site becomes highly disordered.     

Structure and mechanical properties of wet-spun fibers made from natural cellulose nanofibers

Cellulose nanofibers were prepared by TEMPO-mediated oxidation of wood pulp and tunicate cellulose. The cellulose nanofiber suspension in water was spun into an acetone coagulation bath. The spinning rate was varied from 0.1 to 100 m/min to align the nanofibers to the spun fibers. The fibers spun from the wood nanofibers had a hollow structure at spinning rates of >10 m/min, whereas the fibers spun from tunicate nanofibers were porous. Wide-angle X-ray diffraction analysis revealed that the wood and tunicate nanofibers were aligned to the fiber direction of the spun fibers at higher spinning rates. The wood spun fibers at 100 m/min had a Young's modulus of 23.6 GPa, tensile strength of 321 MPa, and elongation at break of 2.2%. The Young's modulus of the wood spun fibers increased with an increase in the spinning rate because of the nanofiber orientation effect.     

Structural characterisation of islet amyloid polypeptide fibrils

Islet amyloid is found in many patients suffering from type 2 diabetes. Amyloid fibrils found deposited in the pancreatic islets are composed of a 37-residue peptide, known as islet amyloid polypeptide (IAPP) (also known as amylin) and are similar to those found in other amyloid diseases. Synthetic IAPP peptide readily forms amyloid fibrils in vitro and this has allowed fibril formation kinetics and the overall morphology of IAPP amyloid to be studied. Here, we use X-ray fibre diffraction, electron microscopy and cryo-electron microscopy to examine the molecular structure of IAPP amyloid fibrils. X-ray diffraction from aligned synthetic amyloid fibrils gave a highly oriented diffraction pattern with layer-lines spaced 4.7 A apart. Electron diffraction also revealed the characteristic 4.7 A meridional signal and the position of the reflection could be compared directly to the image of the diffracting unit. Cryo-electron microscopy revealed the strong signal at 4.7 A that has been previously visualised from a single Abeta fibre. Together, these data build up a picture of how the IAPP fibril is held together by hydrogen bonded beta-sheet structure and contribute to the understanding of the generic structure of amyloid fibrils.     

The sequence dependence of fiber organization. A comparative molecular dynamics study of the islet amyloid polypeptide segments 22-27 and 22-29

Amyloid fiber formation and the possible polymorphism of molecular arrangements depend on the polypeptide length and composition. Here, we seek the chemical clues underlying these processes. Our starting point is based on the experimental observation that some short peptide segments are able to develop fibers that are very similar to those of their original parent proteins. We focus our study on the NFGAILSS peptide, derived from the human islet amyloid polypeptide (residues 22-29). This peptide turned out to be a perfect example, illustrating the fact that the amyloid microscopic organization is highly complex, rather than simply involving hydrogen bond formation. Furthermore, obtaining a reliable molecular model has allowed us to analyze the differences between the amyloid structure we have obtained for this peptide and that obtained for the previously studied, two residues shorter, segment (residues 22-27, NFGAIL). This comparative study yields some clues about chemical events that govern the aggregation of proteins into oriented fibers, such as molecular packing between sheets and the degree of interaction specificity. We characterize the important role played by the hydrophobic and aromatic residues in the inter-sheet association and present new approaches toward the understanding of the nature of events that are likely to take place during fibril formation. These include analysis of interaction patterns derived from specific sheet-associated packing.     

Isolation and characterization of nanofibers from agricultural residues: wheat straw and soy hulls

Cellulose nanofibers were extracted from the agricultural residues, wheat straw and soy hulls, by a chemi-mechanical technique to examine their potential for use as reinforcement fibers in biocomposite applications. The structure of the cellulose nanofibers was investigated by transmission electron microscopy. The wheat straw nanofibers were determined to have diameters in the range of 10-80 nm and lengths of a few thousand nanometers. By comparison, the soy hull nanofibers had diameter 20-120 nm and shorter lengths than the wheat straw nanofibers. Chemical characterization of the wheat straw nanofibers confirmed that the cellulose content was increased from 43% to 84% by an applied alkali and acid treatment. FT-IR spectroscopic analysis of both fibers demonstrated that this chemical treatment also led to partial removal of hemicelluloses and lignin from the structure of the fibers. PXRD results revealed that this resulted in improved crystallinity of the fibers. After mechanical treatments of cryocrushing, disintegration and defibrillation, the thermal properties of the nanofibers were studied by the TGA technique and found to increase dramatically. The degradation temperature of both nanofiber types reached beyond 290 degrees C. This value is reasonably promising for the use of these nanofibers in reinforced-polymer manufacturing.     

Carbon nanotube reinforced Bombyx mori silk nanofibers by the electrospinning process

Nanocomposite fibers of Bombyx mori silk and single wall carbon nanotubes (SWNT) were produced by the electrospinning process. Regenerated silk fibroin dissolved in a dispersion of carbon nanotubes in formic acid was electrospun into nanofibers. The morphology, structure, and mechanical properties of the electrospun nanofibers were examined by field emission environmental scanning electron microscopy (SEM), transmission electron microscopy (TEM), Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, and microtensile testing. TEM of the reinforced fibers shows that the single wall carbon nanotubes are embedded in the fibers. The mechanical properties of the SWNT reinforced fiber show an increase in Young's modulus up to 460% in comparison with the un-reinforced aligned fiber, but at the expense of the strength and strain to failure.     

Modification of hydrophilic and hydrophobic surfaces using an ionic-complementary peptide

Ionic-complementary peptides are novel nano-biomaterials with a variety of biomedical applications including potential biosurface engineering. This study presents evidence that a model ionic-complementary peptide EAK16-II is capable of assembling/coating on hydrophilic mica as well as hydrophobic highly ordered pyrolytic graphite (HOPG) surfaces with different nano-patterns. EAK16-II forms randomly oriented nanofibers or nanofiber networks on mica, while ordered nanofibers parallel or oriented 60 degrees or 120 degrees to each other on HOPG, reflecting the crystallographic symmetry of graphite (0001). The density of coated nanofibers on both surfaces can be controlled by adjusting the peptide concentration and the contact time of the peptide solution with the surface. The coated EAK16-II nanofibers alter the wettability of the two surfaces differently: the water contact angle of bare mica surface is measured to be <10 degrees , while it increases to 20.3+/-2.9 degrees upon 2 h modification of the surface using a 29 microM EAK16-II solution. In contrast, the water contact angle decreases significantly from 71.2+/-11.1 degrees to 39.4+/-4.3 degrees after the HOPG surface is coated with a 29 microM peptide solution for 2 h. The stability of the EAK16-II nanofibers on both surfaces is further evaluated by immersing the surface into acidic and basic solutions and analyzing the changes in the nanofiber surface coverage. The EAK16-II nanofibers on mica remain stable in acidic solution but not in alkaline solution, while they are stable on the HOPG surface regardless of the solution pH. This work demonstrates the possibility of using self-assembling peptides for surface modification applications.     

Inflation of an artery leading to aneurysm formation and rupture

Formation and rupture of aneurysms due to the inflation of an artery with collagen fibers distributed in two preferred directions, subjected to internal pressure and axial stretch are examined within the framework of nonlinear elasticity. A two layer tube model with a fiber-reinforced composite based incompressible anisotropic hyperelastic constitutive material is employed to model the stress-strain behavior of the artery wall with distributed collagen fibers. The artery wall takes up a uniform inflation deformation, and there are no aneurysms in the artery under the normal condition. But an aneurysm may be formed in arteries when the stiffness of the fibers is decreased to a certain value or the direction of the fibers is changed to a certain degree towards the circumferential direction. The aneurysm may expand to much large extent and become complex in shape. One portion of the aneurysm becomes highly distended as a bubble while the rest remains lightly inflated. The rupture of the aneurysm is discussed along with the distribution of stresses. Critical pressures and the rupture pressures are given for different collagen fiber orientations or stiffness. Furthermore, the stability of the solutions is discussed to explain the formation of aneurysm.     

Complementary Effects of Two Growth Factors in Multifunctionalized Silk Nanofibers for Nerve Reconstruction

With the aim of forming bioactive guides for peripheral nerve regeneration, silk fibroin was electrospun to obtain aligned nanofibers. These fibers were functionalized by incorporating Nerve Growth Factor (NGF) and Ciliary NeuroTrophic Factor (CNTF) during electrospinning. PC12 cells grown on the fibers confirmed the bioavailability and bioactivity of the NGF, which was not significantly released from the fibers. Primary neurons from rat dorsal root ganglia (DRGs) were grown on the nanofibers and anchored to the fibers and grew in a directional fashion based on the fiber orientation, and as confirmed by growth cone morphology. These biofunctionalized nanofibers led to a 3-fold increase in neurite length at their contact, which was likely due to the NGF. Glial cell growth, alignment and migration were stimulated by the CNTF in the functionalized nanofibers. Organotypic culture of rat fetal DRGs confirmed the complementary effect of both growth factors in multifunctionalized nanofibers, which allowed glial cell migration, alignment and parallel axonal growth in structures resembling the ‘bands of Bungner’ found in situ. Graftable multi-channel conduits based on biofunctionalized aligned silk nanofibers were developed as an organized 3D scaffold. Our bioactive silk tubes thus represent new options for a biological and biocompatible nerve guidance conduit.     

Electrospun PVA/HAp nanocomposite nanofibers: biomimetics of mineralized hard tissues at a lower level of complexity

Based on the biomimetic approaches the present work describes a straightforward technique to mimic not only the architecture (the morphology) but also the chemistry (the composition) of the lowest level of the hierarchical organization of bone. This technique uses an electrospinning (ES) process with polyvinyl alcohol (PVA) and hydroxyapatite (HAp) nanoparticles. To determine morphology, crystalline structures and thermal properties of the resulting electrospun fibers with the pure PVA and PVA/HAp nanocomposite (NC) before electrospinning various techniques were employed, including transmission electron microscopy (TEM), high-resolution TEM (HR-TEM), scanning electron microscopy (SEM), x-ray diffraction (XRD), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). In addition, FT-IR spectroscopy was carried out to analyze the complex structural changes upon undergoing electrospinning as well as interactions between HAp and PVA. The morphological and crystallographic investigations revealed that the rod-like HAp nanoparticles exhibit a nanoporous morphology and are embedded within the electrospun fibers. A large number of HAp nanorods are preferentially oriented parallel to the longitudinal direction of the electrospun PVA fibers, which closely resemble the naturally mineralized hard tissues of bones. Due to abundant OH groups present in PVA and HAp nanorods, they strongly interact via hydrogen bonding within the electrospun PVA/HAp NC fibers, which results in improved thermal properties. The unique physiochemical features of the electrospun PVA/HAp NC nanofibers prepared by the ES process will open up a wide variety of future applications related to hard tissue replacement and regeneration (bone and dentin), not limited to coating implants.     

Lignin-based electrospun nanofibers reinforced with cellulose nanocrystals

Lignin-based fibers were produced by electrospinning aqueous dispersions of lignin, poly(vinyl alcohol) (PVA), and cellulose nanocrystals (CNCs). Defect-free nanofibers with up to 90 wt % lignin and 15% CNCs were achieved. The properties of the aqueous dispersions, including viscosity, electrical conductivity, and surface tension, were examined and correlated to the electrospinnability and resulting morphology of the composite fibers. A ternary lignin-PVA-water phase diagram was constructed as a tool to rationalize the effect of mixing ratios on the dispersion electrospinability and morphology of the resulting fibers. The influence of reinforcing CNCs on the thermal properties of the multicomponent fibers was investigated by using thermal gravimetric analysis and differential scanning calorimetry. The thermal stability of the system was observed to increase owing to a strong interaction of the lignin-PVA matrix with the dispersed CNCs, mainly via hydrogen bonding, as observed in Fourier transform infrared spectroscopy experiments.     

Synthesis of Keratin-based Nanofiber for Biomedical Engineering

Electrospinning, due to its versatility and potential for applications in various fields, is being frequently used to fabricate nanofibers. Production of these porous nanofibers is of great interest due to their unique physiochemical properties. Here we elaborate on the fabrication of keratin containing poly (ε-caprolactone) (PCL) nanofibers (i.e., PCL/keratin composite fiber). Water soluble keratin was first extracted from human hair and mixed with PCL in different ratios. The blended solution of PCL/keratin was transformed into nanofibrous membranes using a laboratory designed electrospinning set up. Fiber morphology and mechanical properties of the obtained nanofiber were observed and measured using scanning electron microscopy and tensile tester. Furthermore, degradability and chemical properties of the nanofiber were studied by FTIR. SEM images showed uniform surface morphology for PCL/keratin fibers of different compositions. These PCL/keratin fibers also showed excellent mechanical properties such as Young''s modulus and failure point. Fibroblast cells were able to attach and proliferate thus proving good cell viability. Based on the characteristics discussed above, we can strongly argue that the blended nanofibers of natural and synthetic polymers can represent an excellent development of composite materials that can be used for different biomedical applications.     

Mechanical properties of the tracheal mucosal membrane in the rabbit. II. Morphometric analysis.

Folding of the airway mucosal membrane provides a mechanical load that impedes airway smooth muscle contraction. Mechanical testing of rabbit tracheal mucosal membrane showed that the membrane is stiffer in the longitudinal than in the circumferential direction of the airway. To explain this difference in the mechanical properties, we studied the morphological structure of the rabbit tracheal mucosal membrane in both longitudinal and circumferential directions. The collagen fibers were found to form a random meshwork, which would not account for differences in stiffness in the longitudinal and circumferential directions. The volume fraction of the elastic fibers was measured using a point-counting technique. The orientation of the elastic fibers in the tissue samples was measured using a new method based on simple geometry and probability. The results showed that the volume fraction of the elastic fibers in the rabbit tracheal mucosal membrane was approximately 5% and that the elastic fibers were mainly oriented in the longitudinal direction. Age had no statistically significant effect on either the volume fraction or the orientation of the elastic fibers. Linear correlations were found between the steady-state stiffness and the quantity of the elastic fibers oriented in the direction of testing.     

Isolation of Low-Molecular-Weight Proteins from Amyloid Plaque Fibers in Alzheimer''s Disease

During aging of the human brain, and particularly in Alzheimer's disease, progressive neuronal loss is accompanied by the formation of highly stable intra- and extraneuronal protein fibers. Using fluorescence-activated particle sorting, a method has been developed for purifying essentially to homogeneity the extracellular amyloid fibers that form the cores of senile plaques. The purified plaque cores each contain 60-130 pg of protein. Their amino acid composition shows abundant glycine, trace proline, and approximately 50% hydrophobic residues; it resembles that of enriched fractions of the paired helical filaments (PHF) that accumulate intraneuronally in Alzheimer's disease. Senile plaque amyloid fibers share with PHF insolubility in numerous protein denaturants and resistance to proteinases. However, treatment of either fiber preparation with concentrated (88%) formic acid or saturated (6.8 M) guanidine thiocyanate followed by sodium dodecyl sulfate causes disappearance of the fibers and releases proteins migrating at 5-7,000 and 11-15,000 Mr which appear to be dimerically related. Following their separation by size-exclusion HPLC, the proteins solubilized from plaque amyloid and PHF-enriched fractions have highly similar compositions and, on dialysis, readily aggregate into higher Mr polymers. Antibodies raised to the major low-Mr protein selectively label both plaque cores and vascular amyloid deposits in Alzheimer brain but do not stain neurofibrillary tangles, senile plaque neurites, or any other neuronal structure. Thus, extraneuronal amyloid plaque filaments in Alzheimer's disease are composed of hydrophobic low-Mr protein(s) which are also present in vascular amyloid deposits. Current evidence suggests that such protein(s) found in PHF-enriched fractions may derive from copurifying amyloid filaments rather than from PHF.     

Influence of Surfactant Type and Concentration on Electrospinning of Chitosan–Poly(Ethylene Oxide) Blend Nanofibers

Electrospun blend nanofibers were fabricated from chitosan (1,000 kDa, 80% DDA) and poly(ethylene oxide) (PEO; 900 kDa) at a ratio of 3:1 dispersed in 50% and 90% acetic acid. The influence of surfactants on the production of electrospun nanofibers was investigated by adding nonionic polyoxyethylene glycol dodecyl ether (Brij 35), anionic sodium dodecyl sulfate, or cationic dodecyl trimethyl ammonium bromide below, at, and above their specific critical micellar concentration to the polymer blend solution. Viscosity, conductivity, and surface tension of polymer solutions, as well as morphology and composition, of nanofibers containing surfactants were determined. Pure chitosan did not form fibers and was instead deposited as beads. Addition of PEO and an increasing concentration of surfactants induced spinnability and yielded larger fibers with diameters ranging from 10 to 240 nm. Surfactants affected morphology yielding needle-like, smooth, or beaded fibers. Compositional analysis revealed that nanofibers consisted of both polymers and surfactants with concentration of the constituents in nanofibers differing from that in polymer solutions. Results suggest that surfactants may modulate polymer–polymer interactions thus influencing the morphology and composition of deposited nanostructures.