Actin filament bundles in Drosophila wing hairs: hairs and bristles use different strategies for assembly

Actin filament bundles can shape cellular extensions into dramatically different forms. We examined cytoskeleton formation during wing hair morphogenesis using both confocal and electron microscopy. Hairs elongate with linear kinetics (approximately 1 microm/h) over the course of approximately 18 h. The resulting structure is vividly asymmetric and shaped like a rose thorn--elongated in the distal direction, curved in two dimensions with an oval base and a round tip. High-resolution analysis shows that the cytoskeleton forms from microvilli-like pimples that project actin filaments into the cytoplasm. These filaments become cross-linked into bundles by the sequential use of three cross-bridges: villin, forked and fascin. Genetic loss of each cross-bridge affects cell shape. Filament bundles associate together, with no lateral membrane attachments, into a cone of overlapping bundles that matures into an oval base by the asymmetric addition of bundles on the distal side. In contrast, the long bristle cell extension is supported by equally long (up to 400 microm) filament bundles assembled together by end-to-end grafting of shorter modules. Thus, bristle and hair cells use microvilli and cross-bridges to generate the common raw material of actin filament bundles but employ different strategies to assemble these into vastly different shapes.     

F-actin bundles in Drosophila bristles are assembled from modules composed of short filaments

The actin bundles in Drosophila bristles run the length of the bristle cell and are accordingly 65 microns (microchaetes) or 400 microns (macrochaetes) in length, depending on the bristle type. Shortly after completion of bristle elongation in pupae, the actin bundles break down as the bristle surface becomes chitinized. The bundles break down in a bizarre way; it is as if each bundle is sawed transversely into pieces that average 3 microns in length. Disassembly of the actin filaments proceeds at the "sawed" surfaces. In all cases, the cuts in adjacent bundles appear in transverse register. From these images, we suspected that each actin bundle is made up of a series of shorter bundles or modules that are attached end-to-end. With fluorescent phalloidin staining and serial thin sections, we show that the modular design is present in nondegenerating bundles. Decoration of the actin filaments in adjacent bundles in the same bristle with subfragment 1 of myosin reveals that the actin filaments in every module have the same polarity. To study how modules form developmentally, we sectioned newly formed and elongating bristles. At the bristle tip are numerous tiny clusters of 6-10 filaments. These clusters become connected together more basally to form filament bundles that are poorly organized, initially, but with time become maximally cross-linked. Additional filaments are then added to the periphery of these organized bundle modules. All these observations make us aware of a new mechanism for the formation and elongation of actin filament bundles, one in which short bundles are assembled and attached end-to-end to other short bundles, as are the vertical girders between the floors of a skyscraper.     

Heavy meromyosin induces sliding movements between antiparallel actin filaments

Suzuki et al. [Biochemistry 28, 6513-6518 (1989)] have shown that, when F-actin is mixed with inert high polymer, a large number of actin filaments closely align in parallel with overlaps to form a long and thick bundle. The bundle may be designated non-polar, as the constituent filaments are random in polarity (Suzuki et al. 1989). I prepared non-polar bundles of F-actin using methylcellulose (MC) as the high polymer, exposed them to heavy meromyosin (HMM) in the presence of ATP under a light microscope, and followed their morphological changes in the continuous presence of MC. It was found that bundles several tens of micrometers long contracted to about one-third the initial length, while becoming thicker, in half a minute after exposure to HMM. Subsequently, each bundle was split longitudinally into several bundles in a stepwise manner, while the newly formed ones remained associated together at one of the two ends. The product, an aster-like assembly of actin bundles, was morphologically quiescent; that is, individual bundles never contracted upon second exposure to HMM and ATP, although they were still longer than the F-actin used. Bundles in this state consisted of filaments with parallel polarity as examined by electron microscopy. This implies that non-polar bundles were transformed into assemblies of polar bundles with ATP hydrolysis by HMM. Importantly, myosin subfragment-1 caused neither contraction nor transformation. These results are interpreted as follows. In the presence of ATP, the two-headed HMM molecule was able to cross-bridge antiparallel actin filaments, as well as parallel ones.(ABSTRACT TRUNCATED AT 250 WORDS)     

Espin cross-links cause the elongation of microvillus-type parallel actin bundles in vivo

The espin actin-bundling proteins, which are the target of the jerker deafness mutation, caused a dramatic, concentration-dependent lengthening of LLC-PK1-CL4 cell microvilli and their parallel actin bundles. Espin level was also positively correlated with stereocilium length in hair cells. Villin, but not fascin or fimbrin, also produced noticeable lengthening. The espin COOH-terminal peptide, which contains the actin-bundling module, was necessary and sufficient for lengthening. Lengthening was blocked by 100 nM cytochalasin D. Espin cross-links slowed actin depolymerization in vitro less than twofold. Elimination of an actin monomer-binding WASP homology 2 domain and a profilin-binding proline-rich domain from espin did not decrease lengthening, but made it possible to demonstrate that actin incorporation was restricted to the microvillar tip and that bundles continued to undergo actin treadmilling at approximately 1.5 s-1 during and after lengthening. Thus, through relatively subtle effects on actin polymerization/depolymerization reactions in a treadmilling parallel actin bundle, espin cross-links cause pronounced barbed-end elongation and, thereby, make a longer bundle without joining shorter modules.     

The role actin filaments play in providing the characteristic curved form of Drosophila bristles

Drosophila bristles display a precise orientation and curvature. An asymmetric extension of the socket cell overlies the newly emerging bristle rudiment to provide direction for bristle elongation, a process thought to be orchestrated by the nerve dendrite lying between these cells. Scanning electron microscopic analysis of individual bristles showed that curvature is planar and far greater near the bristle base. Correlated with this, as development proceeds the pupa gradually recedes from the inner pupal case (an extracellular layer that encloses the pupa) leading to less bristle curvature along the shaft. We propose that the inner pupal case induces elongating bristles to bend when they contact this barrier. During elongation the actin cytoskeleton locks in this curvature by grafting together the overlapping modules that comprise the long filament bundles. Because the bristle is curved, the actin bundles on the superior side must be longer than those on the inferior side. This is accomplished during grafting by greater elongation of superior side modules. Poor actin cross-bridging in mutant bristles results in altered curvature. Thus, the pattern of bristle curvature is a product of both extrinsic factors-the socket cell and the inner pupal case--and intrinsic factors--actin cytoskeleton assembly.     

Filament formation of the Escherichia coli actin-related protein, MreB, in fission yeast

Proteins structurally related to eukaryotic actins have recently been identified in several prokaryotic organisms. These actin-like proteins (MreB and ParM) and the deviant Walker A ATPase (SopA) play a key role in DNA segregation and assemble into polymers in vitro and in vivo. MreB also plays a role in cellular morphogenesis. Whereas the dynamic properties of eukaryotic actins have been extensively characterized, those of bacterial actins are only beginning to emerge. We have established the fission yeast Schizosaccharomyces pombe as a cellular model for the functional analysis of the Escherichia coli actin-related protein MreB. We show that MreB organizes into linear bundles that grow in a symmetrically bidirectional manner at 0.46 +/- 0.03 microm/min, with new monomers and/or oligomers being added along the entire length of the bundle. Organization of linear arrays was dependent on the ATPase activity of MreB, and their alignment along the cellular long axis was achieved by sliding along the cortex of the cylindrical part of the cell. The cell ends appeared to provide a physical barrier for bundle elongation. These experiments provide new insights into the mechanism of assembly and organization of the bacterial actin cytoskeleton.     

Reassociation of microvillar core proteins: making a microvillar core in vitro

Intestinal epithelia have a brush border membrane of numerous microvilli each comprised of a cross-linked core bundle of 15-20 actin filaments attached to the surrounding membrane by lateral cross-bridges; the cross-bridges are tilted with respect to the core bundle. Isolated microvillar cores contain actin (42 kD) and three other major proteins: fimbrin (68 kD), villin (95 kD), and the 110K-calmodulin complex. The addition of ATP to detergent-treated isolated microvillar cores has previously been shown to result in loss of the lateral cross-bridges and a corresponding decrease in the amount of the 110-kD polypeptide and calmodulin associated with the core bundle. This provided the first evidence to suggest that these lateral cross-bridges to the membrane are comprised at least in part by a 110-kD polypeptide complexed with calmodulin. We now demonstrate that purified 110K-calmodulin complex can be readded to ATP-treated, stripped microvillar cores. The resulting bundles display the same helical and periodic arrangement of lateral bridges as is found in vivo. In reconstitution experiments, actin filaments incubated in EGTA with purified fimbrin and villin form smooth-sided bundles containing an apparently random number of filaments. Upon addition of 110K-calmodulin complex, the bundles, as viewed by electron microscopy of negatively stained images, display along their entire length helically arranged projections with the same 33-nm repeat of the lateral cross-bridges found on microvilli in vivo; these bridges likewise tilt relative to the bundle. Thus, reconstitution of actin filaments with fimbrin, villin, and the 110K-calmodulin complex results in structures remarkably similar to native microvillar cores. These data provide direct proof that the 110K-calmodulin is the cross-bridge protein and indicate that actin filaments bundled by fimbrin and villin are of uniform polarity and lie in register. The arrangement of the cross-bridge arms on the bundle is determined by the structure of the core filaments as fixed by fimbrin and villin; a contribution from the membrane is not required.     

Expression of the 53 kD forked protein rescues F-actin bundle formation and mutant bristle phenotypes in Drosophila.

forked mutations affect bristle development in Drosophila pupae, resulting in short, thick, gnarled bristles in the adult. The forked proteins are components of 200-300-microm-long actin fiber bundles that are present transiently during pupal development [Petersen et al., 1994: Genetics 136:173-182]. These bundles are composed of segments of 3-10 microm long, and forked protein is localized along the actin fiber bundle segments and accumulates at the junctions connecting them longitudinally. In the forked mutants, f(36a) and f(hd), F-actin bundles are greatly reduced in number and size, and bundle segmentation is absent. The p-element, P[w(+), falter] contains a 5.3-kb fragment of the forked gene that encodes the 53-kD forked protein [Lankenau et al., 1996: Mol Cell Biol 16:3535-3544]. Expression of only the 53-kD forked protein is sufficient to rescue the actin bundle and bristle phenotypes of f(36a) and f(hd) mutant flies. The 5.3-kb forked sequence, although smaller than the 13-kb region previously shown to rescue forked mutants [Petersen et al., 1994: Genetics 136:173-182], does contain the core forked sequence that encodes actin binding and bundling domains in cultured mammalian cells [Grieshaber and Petersen, 1999: J Cell Sci 112:2203-2211]. These data show that the 53-kD forked protein is sufficient for normal bristle development and that the domains shown previously to be important for actin bundling in cell culture may be all that are required for normal actin bundle formation in developing Drosophila bristles.     

Actin filament turnover regulated by cross-linking accounts for the size, shape, location, and number of actin bundles in Drosophila bristles

Drosophila bristle cells are shaped during growth by longitudinal bundles of cross-linked actin filaments attached to the plasma membrane. We used confocal and electron microscopy to examine actin bundle structure and found that during bristle elongation, snarls of uncross-linked actin filaments and small internal bundles also form in the shaft cytoplasm only to disappear within 4 min. Thus, formation and later removal of actin filaments are prominent features of growing bristles. These transient snarls and internal bundles can be stabilized by culturing elongating bristles with jasplakinolide, a membrane-permeant inhibitor of actin filament depolymerization, resulting in enormous numbers of internal bundles and uncross-linked filaments. Examination of bundle disassembly in mutant bristles shows that plasma membrane association and cross-bridging adjacent actin filaments together inhibits depolymerization. Thus, highly cross-bridged and membrane-bound actin filaments turn over slowly and persist, whereas poorly cross-linked filaments turnover more rapidly. We argue that the selection of stable bundles relative to poorly cross-bridged filaments can account for the size, shape, number, and location of the longitudinal actin bundles in bristles. As a result, filament turnover plays an important role in regulating cytoskeleton assembly and consequently cell shape.     

Reconstitution in vitro of MSP-based filopodium extension in nematode sperm

The major sperm protein (MSP) motility system in nematode sperm is best known for propelling the movement of mature sperm, where it has taken over the role usually played by actin in amoeboid cell motility. However, MSP filaments also drive the extension of filopodia, transient organelles composed of a core bundle of MSP filaments, that form in the late in sperm development but are not found on crawling cells. We have reconstituted filopodial extension in vitro whereby thin bundles of MSP filaments, each enveloped by a membrane sheath at their growing end, elongated at rates up to 17 microm/min. These bundles often exceeded 500 microm in length but were comprised of filaments only 1 microm long. The reconstituted filopodia assembled in the same cell-free sperm extracts that produced MSP fibers, robust meshworks of filaments that exhibit the same organization and dynamics as the lamellipodial filament system that propels sperm movement. The filopodia and fibers that assembled in vitro both had a membranous structure at their growing end, shared four MSP accessory proteins, and responded identically to agents that alter MSP-based motility by modulating protein phosphorylation. However, filopodia grew three- to four-fold faster than fibers. The reconstitution of filopodial extension shows that, like the actin cytoskeleton, MSP filaments can adopt two architectures, bundles and meshworks, each capable of pushing against membranes to generate protrusion. The reconstitution of both forms of motility in the same in vitro system provides a promising avenue for understanding how the forces for membrane protrusion are produced.     

Association of actin filaments with axonal microtubule tracts

Axoplasmic organelles move on actin as well as microtubules in vitro and axons contain a large amount of actin, but little is known about the organization and distribution of actin filaments within the axon. Here we undertake to define the relationship of the microtubule bundles typically found in axons to actin filaments by applying three microscopic techniques: laser-scanning confocal microscopy of immuno-labeled squid axoplasm; electronmicroscopy of conventionally prepared thin sections; and electronmicroscopy of touch preparations-a thin layer of axoplasm transferred to a specimen grid and negatively stained. Light microscopy shows that longitudinal actin filaments are abundant and usually coincide with longitudinal microtubule bundles. Electron microscopy shows that microfilaments are interwoven with the longitudinal bundles of microtubules. These bundles maintain their integrity when neurofilaments are extracted. Some, though not all microfilaments decorate with the S1 fragment of myosin, and some also act as nucleation sites for polymerization of exogenous actin, and hence are definitively identified as actin filaments. These actin filaments range in minimum length from 0.5 to 1.5 µm with some at least as long as 3.5 µm. We conclude that the microtubule-based tracks for fast organelle transport also include actin filaments. These actin filaments are sufficiently long and abundant to be ancillary or supportive of fast transport along microtubules within bundles, or to extend transport outside of the bundle. These actin filaments could also be essential for maintaining the structural integrity of the microtubule bundles.     

Regulation of actin filament cross-linking and bundle shape in Drosophila bristles

Previous studies demonstrate that in developing Drosophila bristles, two cross-linking proteins are required sequentially to bundle the actin filaments that support elongating bristle cells. The forked protein initiates the process and facilitates subsequent cross-linking by fascin. Using cross-linker-specific antibodies, mutants, and drugs we show that fascin and actin are present in excessive amounts throughout bundle elongation. In contrast, the forked cross-linker is limited throughout bundle formation, and accordingly, regulates bundle size and shape. We also show that regulation of cross-linking by phosphorylation can affect bundle size. Specifically, inhibition of phosphorylation by staurosporine results in a failure to form large bundles if added during bundle formation, and leads to a loss of cross-linking by fascin if added after the bundles form. Interestingly, inhibition of dephosphorylation by okadaic acid results in the separation of the actin bundles from the plasma membrane. We further show by thin section electron microscopy analysis of mutant and wild-type bristles that the amount of material that connects the actin bundles to the plasma membrane is also limited throughout bristle elongation. Therefore, overall bundle shape is determined by the number of actin filaments assembled onto the limited area provided by the connector material. We conclude that assembly of actin bundles in Drosophila bristles is controlled in part by the controlled availability of a single cross-linking protein, forked, and in part by controlled phosphorylation of cross-links and membrane actin connector proteins.     

Filament arrangements in negatively stained cultured cells: the organization of actin

Treatment of spread, cultured cells with Triton X-100 followed by negative staining reveals the organization of the unextracted intracellular filamentous elements: actin, microtubules and the 100 angstrom filaments. The present report describes the organization of the actin-like filaments in human skin fibroblasts and mouse 3 T 3 cells. As shown in earlier studies, the cytoplasmic stress fibres were seen to be composed of bundles of colinear actin-like filaments. In addition to these large stress fibres much smaller bundles of thin filaments as well as randomly oriented thin filaments were also observed. A thick bundle of thin filaments, 0.2 microm to 0.5 microm in diameter, was found to delimit the concave cell edges most prominent in well-spread stationary cells. The leading edge and ruffled border of human skin fibroblasts appeared as a broad web, of meshwork of diagonally oriented thin filaments interconnecting radiating, linear bundles of thin filaments about 0.1 microm in diameter. These bundles corresponding to the microspikes described earlier ranged from about 1.5 microm in length and were separated by 1 microm to 3 microm laterally. The leading edge of 3 T 3 cells showed a similar organization but with fewer radiating thin filament bundles. Both the filaments in the bundles and in the meshwork formed arrowhead complexes with smooth muscle myosin subfragment - 1 which were unipolar and directed towards the main body of the cell. The findings are discussed in relation to the mechanisms of non-muscle cell motility.     

Identification of Novel Graded Polarity Actin Filament Bundles in Locomoting Heart Fibroblasts: Implications for the Generation of Motile Force

We have determined the structural organization and dynamic behavior of actin filaments in entire primary locomoting heart fibroblasts by S1 decoration, serial section EM, and photoactivation of fluorescence. As expected, actin filaments in the lamellipodium of these cells have uniform polarity with barbed ends facing forward. In the lamella, cell body, and tail there are two observable types of actin filament organization. A less abundant type is located on the inner surface of the plasma membrane and is composed of short, overlapping actin bundles (0.25–2.5 μm) that repeatedly alternate in polarity from uniform barbed ends forward to uniform pointed ends forward. This type of organization is similar to the organization we show for actin filament bundles (stress fibers) in nonlocomoting cells (PtK2 cells) and to the known organization of muscle sarcomeres. The more abundant type of actin filament organization in locomoting heart fibroblasts is mostly ventrally located and is composed of long, overlapping bundles (average 13 μm, but can reach up to about 30 μm) which span the length of the cell. This more abundant type has a novel graded polarity organization. In each actin bundle, polarity gradually changes along the length of the bundle. Actual actin filament polarity at any given point in the bundle is determined by position in the cell; the closer to the front of the cell the more barbed ends of actin filaments face forward.

By photoactivation marking in locomoting heart fibroblasts, as expected in the lamellipodium, actin filaments flow rearward with respect to substrate. In the lamella, all marked and observed actin filaments remain stationary with respect to substrate as the fibroblast locomotes. In the cell body of locomoting fibroblasts there are two dynamic populations of actin filaments: one remains stationary and the other moves forward with respect to substrate at the rate of the cell body.

This is the first time that the structural organization and dynamics of actin filaments have been determined in an entire locomoting cell. The organization, dynamics, and relative abundance of graded polarity actin filament bundles have important implications for the generation of motile force during primary heart fibroblast locomotion.

     

Molecular mechanism of bundle formation by the bacterial actin ParM

The actin homolog ParM plays a microtubule-like role in segregating DNA prior to bacterial cell division. Fluorescence and cryo-electron microscopy have shown that ParM forms filament bundles between separating DNA plasmids in vivo. Given the lack of ParM bundling proteins it remains unknown how ParM bundles form at the molecular level. Here we show using time-lapse TIRF microscopy, under in vitro molecular crowding conditions, that ParM-bundle formation consists of two distinct phases. At the onset of polymerization bundle thickness and shape are determined in the form of nuclei of short helically disordered filaments arranged in a liquid-like lattice. These nuclei then undergo an elongation phase whereby they rapidly increase in length. At steady state, ParM bundles fuse into one single large aggregate. This behavior had been predicted by theory but has not been observed for any other cytomotive biopolymer, including F-actin. We employed electron micrographs of ParM rafts, which are 2-D analogs of 3-D bundles, to identify the main molecular interfilament contacts within these suprastructures. The interface between filaments is similar for both parallel and anti-parallel orientations and the distribution of filament polarity is random within a bundle. We suggest that the interfilament interactions are not due to the interactions of specific residues but rather to long-range, counter ion mediated, electrostatic attractive forces. A randomly oriented bundle ensures that the assembly is rigid and that DNA may be captured with equal efficiency at both ends of the bundle via the ParR binding protein.     

Massive actin bundle couples macrocilia to muscles in the ctenophore Bero?

Macrocilia are thick compound ciliary organelles arising individually from elongated epithelial cells on the lips of beroid ctenophores. A giant wedge-shaped bundle of microfilaments extends 25-30 microns from the base of each macrocilium to the lower end of the cell, terminating at a junction with an underlying smooth muscle cell. The broad end of the microfilament bundle is anchored to the macrocilium by striated rootlet fibers that extend from the basal bodies into the bundle and are linked to the microfilaments by periodic bridges. Fluorescence microscopy of rhodamine-phalloidin stained intact tissue, dissociated macrociliary cells, and Triton/glycerol-isolated bundles shows that the microfilaments contain actin. The microfilaments run generally parallel to the long axis of the bundle but are not highly ordered. Filaments decorated with myosin S1 show a uniform polarity with arrowheads pointing away from the tapered membrane-associated end of the bundle. No variations in bundle length (nor changes in rootlet periodicity) were observed in tissue fixed under conditions of calcium activation. Isolated bundles did not contract in Mg-ATP, even though detached macrocilia underwent reactivated beating and sliding disintegration. Macrocilia are used to bite through food organisms or transport prey into the stomach. The actin filament bundles probably play a supporting role as a structural linker between macrocilia and subepithelial muscle fibers and may serve as intracellular tendons to mechanically coordinate the motor activities of macrocilia and muscles during prey ingestion.     

Reconstitution of contractile actomyosin bundles

Contractile actomyosin bundles are critical for numerous aspects of muscle and nonmuscle cell physiology. Due to the varying composition and structure of actomyosin bundles in vivo, the minimal requirements for their contraction remain unclear. Here, we demonstrate that actin filaments and filaments of smooth muscle myosin motors can self-assemble into bundles with contractile elements that efficiently transmit actomyosin forces to cellular length scales. The contractile and force-generating potential of these minimal actomyosin bundles is sharply sensitive to the myosin density. Above a critical myosin density, these bundles are contractile and generate large tensile forces. Below this threshold, insufficient cross-linking of F-actin by myosin thick filaments prevents efficient force transmission and can result in rapid bundle disintegration. For contractile bundles, the rate of contraction decreases as forces build and stalls under loads of ∼0.5 nN. The dependence of contraction speed and stall force on bundle length is consistent with bundle contraction occurring by several contractile elements connected in series. Thus, contraction in reconstituted actomyosin bundles captures essential biophysical characteristics of myofibrils while lacking numerous molecular constituents and structural signatures of sarcomeres. These results provide insight into nonsarcomeric mechanisms of actomyosin contraction found in smooth muscle and nonmuscle cells.     

Distribution of actin bundles in Bowman's capsule of rat kidney

In this study we define the distribution of actin bundle arrangement in Bowman's capsule of rat renal corpuscles. Parietal cells of Bowman's capsule were examined by conventional light microscopy, electron microscopy and confocal microscopy. Within each parietal cell individual actin bundles are arranged in a parallel fashion running the length of the cell. Computer reconstructions obtained using confocal microscopy clearly show the lengths of actin bundles to be arranged, on a capsule level, end-to-end, at angles and perpendicular to bundles in adjacent cells. The bundles stain positively for non-muscle myosin and vinculin. The presence and arrangement of actin bundles in parietal cells is consistent with a role in reinforcing capsule structure.     

Interplay between Brownian motion and cross-linking controls bundling dynamics in actin networks

Morphology changes in cross-linked actin networks are important in cell motility, division, and cargo transport. Here, we study the transition from a weakly cross-linked network of actin filaments to a heavily cross-linked network of actin bundles through microscopic Brownian dynamics simulations. We show that this transition occurs in two stages: first, a composite bundle network of small and highly aligned bundles evolves from cross-linking of individual filaments and, second, small bundles coalesce into the clustered bundle state. We demonstrate that Brownian motion speeds up the first stage of this process at a faster rate than the second. We quantify the time to reach the composite bundle state and show that it strongly increases as the mesh size increases only when the concentration of cross-links is small and that it remains roughly constant if we decrease the relative ratio of cross-linkers as we increase the actin concentration. Finally, we examine the dependence of the bundling timescale on filament length, finding that shorter filaments bundle faster because they diffuse faster.     

Supercontracted state of vertebrate smooth muscle cell fragments reveals myofilament lengths

Isolated cell preparations from chicken gizzard smooth muscle typically contain a mixture of cell fragments and whole cells. Both species are spontaneously permeable and may be preloaded with externally applied phalloidin and antibodies and then induced to contract with Mg ATP. Labeling with antibodies revealed that the cell fragments specifically lacked certain cytoskeletal proteins (vinculin, filamin) and were depleted to various degrees in others (desmin, alpha-actinin). The cell fragments showed a unique mode of supercontraction that involved the protrusion of actin filaments through the cell surface during the terminal phase of shortening. In the presence of dextran, to minimize protein loss, the supercontracted products were star-like in form, comprising long actin bundles radiating in all directions from a central core containing myosin, desmin, and alpha-actinin. It is concluded that supercontraction is facilitated by an effective uncoupling of the contractile apparatus from the cytoskeleton, due to partial degradation of the latter, which allows unhindered sliding of actin over myosin. Homogenization of the cell fragments before or after supercontraction produced linear bipolar dimer structures composed of two oppositely polarized bundles of actin flanking a central bundle of myosin filaments. Actin filaments were shown to extend the whole length of the bundles and their length averaged integral to 4.5 microns. Myosin filaments in the supercontracted dimers averaged 1.6 microns in length. The results, showing for the first time the high actin to myosin filament length ratio in smooth muscle are readily consistent with the slow speed of shortening of this tissue. Other implications of the results are also discussed.