Structural and Functional Studies of the Pseudomonas aeruginosa Minor Pilin,PilE

Many bacterial pathogens, including Pseudomonas aeruginosa, use type IVa pili (T4aP) for attachment and twitching motility. T4aP are composed primarily of major pilin subunits, which are repeatedly assembled and disassembled to mediate function. A group of pilin-like proteins, the minor pilins FimU and PilVWXE, prime pilus assembly and are incorporated into the pilus. We showed previously that minor pilin PilE depends on the putative priming subcomplex PilVWX and the non-pilin protein PilY1 for incorporation into pili, and that with FimU, PilE may couple the priming subcomplex to the major pilin PilA, allowing for efficient pilus assembly. Here we provide further support for this model, showing interaction of PilE with other minor pilins and the major pilin. A 1.25 Å crystal structure of PilE_Δ1–28 shows a typical type IV pilin fold, demonstrating how it may be incorporated into the pilus. Despite limited sequence identity, PilE is structurally similar to Neisseria meningitidis minor pilins PilX_Nm and PilV_Nm, recently suggested via characterization of mCherry fusions to modulate pilus assembly from within the periplasm. A P. aeruginosa PilE-mCherry fusion failed to complement twitching motility or piliation of a pilE mutant. However, in a retraction-deficient strain where surface piliation depends solely on PilE, the fusion construct restored some surface piliation. PilE-mCherry was present in sheared surface fractions, suggesting that it was incorporated into pili. Together, these data provide evidence that PilE, the sole P. aeruginosa equivalent of PilX_Nm and PilV_Nm, likely connects a priming subcomplex to the major pilin, promoting efficient assembly of T4aP.     

Pseudomonas aeruginosa Minor Pilins Are Incorporated into Type IV Pili

Type IV pili are long filamentous appendages required for both adhesion and a unique form of motility known as twitching. Twitching motility involves the extension and retraction of the pilus and requires a number of gene products, including five conserved pilin-like proteins of unknown function (FimU, PilV, PilW, PilX, and PilE in Pseudomonas aeruginosa), termed ‘minor’ pilins. Maintenance of a specific stoichiometric ratio among the minor pilins was important for function, as loss or overexpression of any component impaired motility. Disruption of individual minor pilin genes, or of the AlgR positive regulator of minor pilin operon expression in a strain where pilus retraction was blocked by inactivation of the PilT retraction ATPase, revealed that pili were produced, although levels of piliation were reduced relative to pilT positive control. Differences in the levels of piliation of complemented strains pointed to specific roles for each protein in the assembly process, with FimU and PilX being implicated as key promoters of pilus assembly on the cell surface. Using specific antibodies for each protein, we showed that the minor pilins FimU, PilV, PilW, PilX, and PilE were processed by the pre-pilin peptidase PilD and incorporated throughout the growing pilus filament. This is the first study to demonstrate that the minor pilins, conserved among bacteria expressing type IVa pili, are incorporated into the fiber and support a role for them in the initiation, but not termination, of pilus assembly.     

Crystal Structure of the Minor Pilin CofB,the Initiator of CFA/III Pilus Assembly in Enterotoxigenic Escherichia coli

Type IV pili are extracellular polymers of the major pilin subunit. These subunits are held together in the pilus filament by hydrophobic interactions among their N-terminal α-helices, which also anchor the pilin subunits in the inner membrane prior to pilus assembly. Type IV pilus assembly involves a conserved group of proteins that span the envelope of Gram-negative bacteria. Among these is a set of minor pilins, so named because they share their hydrophobic N-terminal polymerization/membrane anchor segment with the major pilins but are much less abundant. Minor pilins influence pilus assembly and retraction, but their precise functions are not well defined. The Type IV pilus systems of enterotoxigenic Escherichia coli and Vibrio cholerae are among the simplest of Type IV pilus systems and possess only a single minor pilin. Here we show that the enterotoxigenic E. coli minor pilins CofB and LngB are required for assembly of their respective Type IV pili, CFA/III and Longus. Low levels of the minor pilins are optimal for pilus assembly, and CofB can be detected in the pilus fraction. We solved the 2.0 Å crystal structure of N-terminally truncated CofB, revealing a pilin-like protein with an extended C-terminal region composed of two discrete domains connected by flexible linkers. The C-terminal region is required for CofB to initiate pilus assembly. We propose a model for CofB-initiated pilus assembly with implications for understanding filament growth in more complex Type IV pilus systems as well as the related Type II secretion system.     

Prime time for minor subunits of the type II secretion and type IV pilus systems

The type II secretion system (T2SS) exports folded proteins from the periplasms of Gram‐negative bacteria. The type IV pilus system (T4PS) is a multifunctional machine used for adherence, motility and DNA transfer in bacteria and archaea. Partial sequence identity between the two systems suggests that they are related and might function via a similar mechanism, the dynamic assembly and disassembly of pseudopilus (T2SS) or pilus (T4PS) filaments. The major subunit in each system is thought to form the bulk of the (pseudo)pilus, while minor (low‐abundance) subunits have proposed roles in assembly initiation, antagonism of disassembly, or modulation of (pseudo)pilus functional properties. In this issue, Cisneros et al. ( 2012 ) extend their previous finding that pseudopilus assembly is primed by the minor pseudopilins, showing that the same proteins can initiate assembly of Escherichia coli T4P. Similarly, they show that the E. coli minor pilins prime the polymerization of T2S pseudopili, although unlike genuine pseudopili, the chimeric filaments did not support secretion. This work reinforces the notion of a common assembly mechanism for the T2S and T4P systems.     

Pseudopilin residue E5 is essential for recruitment by the type 2 secretion system assembly platform

Type II secretion systems (T2SSs) promote secretion of folded proteins playing important roles in nutrient acquisition, adaptation and virulence of Gram‐negative bacteria. Protein secretion is associated with the assembly of type 4 pilus (T4P)‐like fibres called pseudopili. Initially membrane embedded, pseudopilin and T4 pilin subunits share conserved transmembrane segments containing an invariant Glu residue at the fifth position, E5. Mutations of E5 in major T4 pilins and in PulG, the major pseudopilin of the Klebsiella T2SS abolish fibre assembly and function. Among the four minor pseudopilins, only PulH required E5 for secretion of pullulanase, the substrate of the Pul T2SS. Mass‐spectrometry analysis of pili resulting from the co‐assembly of PulG^E5A variant and PulG^WT ruled out an E5 role in pilin processing and N‐methylation. A bacterial two‐hybrid analysis revealed interactions of the full‐length pseudopilins PulG and PulH with the PulJ‐PulI‐PulK priming complex and with the assembly factors PulM and PulF. Remarkably, PulG^E5A and PulH^E5A variants were defective in interaction with PulM but not with PulF, and co‐purification experiments confirmed the E5‐dependent interaction between native PulM and PulG. These results reveal the role of E5 in a recruitment step critical for assembly of the functional T2SS, likely relevant to T4P assembly systems.     

Interaction of two variable proteins (PilE and PilC) required for pilus-mediated adherence of Neisseria gonorrhoeae to human epithelial cells

Pili confer the initial ability of Neisseria gonorrhoeae to bind to epithelial cells. Pilin (PilE), the major pilus subunit, and a minor protein termed PilC, reportedly essential for pilus biogenesis, undergo intra-strain phase and structural variation. We demonstrate here that at least two different adherence properties are associated with the gonococcal pili: one is specific for erythrocytes, which is virtually unaffected by PilE variation, and another is specific for epithelial cells, and is modulated in response to the variation of PilE. Based on this finding, mutants of a recA- strain were selected that had lost the ability to bind to human cornea epithelial cells (A-) but retained the ability to form pili (P+) and to agglutinate human erythrocytes (H+). The adherence-negative mutants failed to produce detectable levels of PilC1 or PilC2 proteins, representing piIC phase variants generated in the absence of RecA. The A- pilC phase variants were indistinguishable from their A+ parents and spontaneous A+ revertants with regard to the amount of PilE produced and its electrophoretic mobility, the degrees of piliation and haemagglutination, and the pilE nucleotide sequence. These data demonstrate a central role for PilC in pilus-mediated adherence of N. gonorrhoeae to human epithelial cells and further indicate that neither PilC1 nor PilC2 is obligatory for the assembly of gonococcal pili.     

Infection of human mucosal tissue by Pseudomonas aeruginosa requires sequential and mutually dependent virulence factors and a novel pilus‐associated adhesin

Tissue damage predisposes humans to life‐threatening disseminating infection by the opportunistic pathogen Pseudomonas aeruginosa. Bacterial adherence to host tissue is a critical first step in this infection process. It is well established that P. aeruginosa attachment to host cells involves type IV pili (TFP), which are retractile surface fibres. The molecular details of attachment and the identity of the bacterial adhesin and host receptor remain controversial. Using a mucosal epithelium model system derived from primary human tissue, we show that the pilus‐associated protein PilY1 is required for bacterial adherence. We establish that P. aeruginosa preferentially binds to exposed basolateral host cell surfaces, providing a mechanistic explanation for opportunistic infection of damaged tissue. Further, we demonstrate that invasion and fulminant infection of intact host tissue requires the coordinated and mutually dependent action of multiple bacterial factors, including pilus fibre retraction and the host cell intoxication system, termed type III secretion. Our findings offer new and important insights into the complex interactions between a pathogen and its human host and provide compelling evidence that PilY1 serves as the principal P. aeruginosa adhesin for human tissue and that it specifically recognizes a host receptor localized or enriched on basolateral epithelial cell surfaces.     

Expression of multiple types of N-methyl Phe pili in Pseudomonas aeruginosa

The nature of pili synthesized by Pseudomonas aeruginosa when plasmid-borne genes of homologous pilins from Bacteroides nodosus are Introduced as thermoregulated expression systems has been ascertained. Expression of B. nodosus pili inhibited the production of indigenous P. aeruginosa pili, and an organism harbouring pilin genes from two strains of B. nodosus produced two seroiogically distinct populations of pili on each cell. Simultaneous production of both Indigenous and foreign pili was achieved by partial induction of expression. Homogeneity in pilus structure suggests either that there is an exclusive specificity of Interaction between identical pilin subunits in pilus assembly, or that each pilus is produced from the translation products of a single messenger RNA molecule, with translation and pilus assembly closely coupled.     

The minor pilin subunit Sgp2 is necessary for assembly of the pilus encoded by the srtG cluster of Streptococcus suis

Gram-positive pili are composed of covalently bound pilin subunits whose assembly is mediated via a pilus-specific sortase(s). Major subunits constitute the pilus backbone and are therefore essential for pilus formation. Minor subunits are also incorporated into the pilus, but they are considered to be dispensable for backbone formation. The srtG cluster is one of the putative pilus gene clusters identified in the major swine pathogen Streptococcus suis. It consists of one sortase gene (srtG) and two putative pilin subunit genes (sgp1 and sgp2). In this study, by constructing mutants for each of the genes in the cluster and by both immunoblotting and immunogold electron microscopic analysis with antibodies against Sgp1 and Sgp2, we found that the srtG cluster mediates the expression of pilus-like structures in S. suis strain 89/1591. In this pilus, Sgp1 forms the backbone, whereas Sgp2 is incorporated as the minor subunit. In accordance with the current model of pilus assembly by Gram-positive organisms, the major subunit Sgp1 was indispensable for backbone formation and the cognate sortase SrtG mediated the polymerization of both subunits. However, unlike other well-characterized Gram-positive bacterial pili, the minor subunit Sgp2 was required for polymerization of the major subunit Sgp1. Because Sgp2 homologues are encoded in several other Gram-positive bacterial pilus gene clusters, in some types of pili, minor pilin subunits may contribute to backbone formation by a novel mechanism.     

Type IV pilus biogenesis genes and their roles in biofilm formation in the biological control agent Lysobacter enzymogenes OH11

Type IV pilus (T4P) is widespread in bacteria, yet its biogenesis mechanism and functionality is only partially elucidated in a limited number of bacterial species. Here, by using strain OH11 as the model organism, we reported the identification of 26 T4P structural or functional component (SFC) proteins in the Gram-negative Lysobacter enzymogenes, which is a biocontrol agent potentially exploiting T4P-mediated twitching motility for antifungal activity. Twenty such SFC coding genes were individually knocked-out in-frame to create a T4P SFC deletion library. By using combined phenotypic and genetic approaches, we found that 14 such SFCs, which were expressed from four operons, were essential for twitching motility. These SFCs included the minor pilins (PilE_i, PilX_i, PilV_i, and FimT_i), the anti-retraction protein PilY1_i, the platform protein PilC, the extension/extraction ATPases (PilB, PilT, and PilU), and the PilMNOPQ complex. Among these, mutation of pilT or pilU caused a hyper piliation, while the remaining 12 SFCs were indispensable for pilus formation. Ten (FimT_i, PilY1_i, PilB, PilT, PilU, and the PilMNOPQ complex) of the 14 SFC proteins, as well as PilA, were further shown to play a key role in L. enzymogenes biofilm formation. Overall, our results provide the first report to dissect the genetic basis of T4P biogenesis and its role in biofilm formation in L. enzymogenes in detail, which can serve as an alternative platform for studying T4P biogenesis and its antifungal function.

     

The Platform Protein Is Essential for Type IV Pilus Biogenesis

A systematic genetic analysis was performed to identify the inner membrane proteins essential for type IV pilus (T4P) expression in Pseudomonas aeruginosa. By inactivating the retraction aspect of pilus function, genes essential for T4P assembly were discriminated. In contrast to previous studies in the T4P system of Neisseria spp., we found that components of the inner membrane subcomplex consisting of PilMNOP were not essential for surface pilus expression, whereas the highly conserved inner membrane protein PilC was essential. Here, we present data that PilC may coordinate the activity of cytoplasmic polymerization (PilB) and depolymerization (PilT) ATPases via their interactions with its two cytoplasmic domains. Using in vitro co-affinity purification, we show that PilB interacts with the N-terminal cytoplasmic domain of PilC. We hypothesized that PilT similarly interacts with the PilC C-terminal cytoplasmic domain. Overexpression of that domain in the wild-type protein reduced twitching motility by ∼50% compared with the vector control. Site-directed mutagenesis of conserved T4P-specific residues in the PilC C-terminal domain yielded mutant proteins that supported wild-type pilus assembly but had a reduced capacity to support twitching motility, suggesting impairment of putative PilC-PilT interactions. Taken together, our results show that PilC is an essential inner membrane component of the T4P system, controlling both pilus assembly and disassembly.     

Structure of the Pseudomonas aeruginosa XcpT pseudopilin,a major component of the type II secretion system

The bacterial type II protein secretion (T2S) and type IV piliation (T4P) systems share several common features. In particular, it is well established that the T2S system requires the function of a pilus-like structure, called pseudopilus, which is built upon assembly of pilin-like subunits, called pseudopilins. Pilins and pseudopilins have a hydrophobic N-terminal region, which precedes an extended hydrophilic C-terminal region. In the case of pilins, it was shown that oligomerisation and formation of helical fibers, takes place through interaction between the hydrophobic domains. XcpT, is the most abundant protein of the Pseudomonas aeruginosa T2S, and was proposed to be the main component in the pseudopilus. In this study we present the high-resolution NMR structure of the hydrophilic domain of XcpT (XcpTp). XcpTp is lacking the C-terminal disulfide bridged “D” domain found in type IV pilins and likely involved in receptor binding. This is in agreement with the idea that the XcpT-containing pseudopilus is required for protein secretion and not for bacterial attachment. Interestingly, by solving the 3D structure of XcpTp we revealed that the previously called αβ-loop pilin region is in fact highly conserved among major type II pseudopilins and constitutes a specific consensus motif for identifying major pseudopilins, which belong to this family.     

Assembly of complex organelles: pilus biogenesis in gram-negative bacteria as a model system

Pathogenic bacteria assemble a variety of adhesive structures on their surface for attachment to host cells. Some of these structures are quite complex. For example, the hair-like organelles known as pili or fimbriae are generally composed of several components and often exhibit composite morphologies. In gram-negative bacteria assembly of pili requires that the subunits cross the cytoplasmic membrane, fold correctly in the periplasm, target to the outer membrane, assemble into an ordered structure, and cross the outer membrane to the cell surface. Thus, pilus biogenesis provides a model for a number of basic biological problems including protein folding, trafficking, secretion, and the ordered assembly of proteins into complex structures. P pilus biogenesis represents one of the best-understood pilus systems. P pili are produced by 80-90% of all pyelonephritic Escherichia coli and are a major virulence determinant for urinary tract infections. Two specialized assembly factors known as the periplasmic chaperone and outer membrane usher are required for P pilus assembly. A chaperone/usher pathway is now known to be required for the biogenesis of more than 30 different adhesive structures in diverse gram-negative pathogenic bacteria. Elucidation of the chaperone/usher pathway was brought about through a powerful combination of molecular, biochemical, and biophysical techniques. This review discusses these approaches as they relate to pilus assembly, with an emphasis on newer techniques.     

Roles of the Minor Pseudopilins,XpsH, XpsI and XpsJ,in the Formation of XpsG-Containing Pseudopilus in <Emphasis Type="BoldItalic">Xanthomonas campestris</Emphasis> pv. Campestris

Summary Due to their similarity to type IV pilus (Tfp) subunits, the pseudopilins, XpsG, -H, -I, -J and -K, have been predicted to form a pilus-like structure in the type II secretion (T2S) pathway. While overexpression of GspG can result in the formation of bundle structures, the functions of other pseudopilin are not known yet. In this study, we investigate the mutual interaction among the pseudopilins and characterize the specialized minor pseudopilin, XpsJ. By using gel filtration and Ni-NTA affinity chromatography, a linearly ordered interactive relationship is revealed among the four pseudopilins, XpsG-XpsI-XpsH-XpsJ. Notably, unlike the mutant XpsJ194 staying in the inner membrane, wild type XpsJ stayed in the outer membrane and blocked the extension of overexpressed XpsG to outside of the cell. By analogy with the Type I pilus structures, we hypothesize that the XpsH and XpsI might act as an adaptor to connect XpsJ with the major pseudopilin XpsG, and XpsJ might act as a tip to restrict the out-growth of XpsG in the pilus-like structure of the T2S pathway.     

Minor pilin subunits are conserved in Vibrio cholerae type IV pili

The nucleotide sequences of five open reading frames within the Vibrio cholerae NAGV14 type IV pilus gene cluster were determined. The genes showed high homology to the mannose-sensitive hemagglutinin (MSHA) pilus genes mshB, mshC, mshD, mshO and mshP. PCR analysis showed that a MSHA-like gene cluster is highly conserved among different V. cholerae strains, with the exception of the previously reported major pilin subunit. Recombinant MshB and MshO proteins were purified and specific antiserum was raised to each of them. Western blotting analyses showed that these antisera reacted with purified NAGV14 and MSHA pili. The results suggested that MshB and MshO are minor components of the pilus fiber. Although there was no cross-reaction between the major pilin subunits of NAGV14 and MSHA pili, minor components seemed to be highly homologous and immunologically cross-reactive.     

The differential affinity of the usher for chaperone–subunit complexes is required for assembly of complete pili

Attachment to host cells via adhesive surface structures is a prerequisite for the pathogenesis of many bacteria. Uropathogenic Escherichia coli assemble P and type 1 pili for attachment to the host urothelium. Assembly of these pili requires the conserved chaperone/usher pathway, in which a periplasmic chaperone controls the folding of pilus subunits and an outer membrane usher provides a platform for pilus assembly and secretion. The usher has differential affinity for pilus subunits, with highest affinity for the tip‐localized adhesin. Here, we identify residues F21 and R652 of the P pilus usher PapC as functioning in the differential affinity of the usher. R652 is important for high‐affinity binding to the adhesin whereas F21 is important for limiting affinity for the PapA major rod subunit. PapC mutants in these residues are specifically defective for pilus assembly in the presence of PapA, demonstrating that differential affinity of the usher is required for assembly of complete pili. Analysis of PapG deletion mutants demonstrated that the adhesin is not required to initiate P pilus biogenesis. Thus, the differential affinity of the usher may be critical to ensure assembly of functional pilus fibres.     

Type II protein secretion in Pseudomonas aeruginosa: the pseudopilus is a multifibrillar and adhesive structure

The type II secretion pathway of Pseudomonas aeruginosa is involved in the extracellular release of various toxins and hydrolytic enzymes such as exotoxin A and elastase. This pathway requires the function of a macromolecular complex called the Xcp secreton. The Xcp secreton shares many features with the machinery involved in type IV pilus assembly. More specifically, it involves the function of five pilin-like proteins, the XcpT-X pseudopilins. We show that, upon overexpression, the XcpT pseudopilin can be assembled in a pilus, which we call a type II pseudopilus. Image analysis and filtering of electron micrographs indicated that these appendages are composed of individual fibrils assembled together in a bundle structure. Our observations thus revealed that XcpT has properties similar to those of type IV pilin subunits. Interestingly, the assembly of the type II pseudopilus is not exclusively dependent on the Xcp machinery but can be supported by other similar machineries, such as the Pil (type IV pilus) and Hxc (type II secretion) systems of P. aeruginosa. In addition, heterologous pseudopilins can be assembled by P. aeruginosa into a type II pseudopilus. Finally, we showed that assembly of the type II pseudopilus confers increased bacterial adhesive capabilities. These observations confirmed the ability of pseudopilins to form a pilus structure and raise questions with respect to their function in terms of secretion and adhesion, two crucial biological processes in the course of bacterial infections.     

Single-Residue Changes in the C-Terminal Disulfide-Bonded Loop of the Pseudomonas aeruginosa Type IV Pilin Influence Pilus Assembly and Twitching Motility

PilA, the major pilin subunit of Pseudomonas aeruginosa type IV pili (T4P), is a principal structural component. PilA has a conserved C-terminal disulfide-bonded loop (DSL) that has been implicated as the pilus adhesinotope. Structural studies have suggested that DSL is involved in intersubunit interactions within the pilus fiber. PilA mutants with single-residue substitutions, insertions, or deletions in the DSL were tested for pilin stability, pilus assembly, and T4P function. Mutation of either Cys residue of the DSL resulted in pilins that were unable to assemble into fibers. Ala replacements of the intervening residues had a range of effects on assembly or function, as measured by changes in surface pilus expression and twitching motility. Modification of the C-terminal P-X-X-C type II beta-turn motif, which is one of the few highly conserved features in pilins across various species, caused profound defects in assembly and twitching motility. Expression of pilins with suspected assembly defects in a pilA pilT double mutant unable to retract T4P allowed us to verify which subunits were physically unable to assemble. Use of two different PilA antibodies showed that the DSL may be an immunodominant epitope in intact pili compared with pilin monomers. Sequence diversity of the type IVa pilins likely reflects an evolutionary compromise between retention of function and antigenic variation. The consequences of DSL sequence changes should be evaluated in the intact protein since it is technically feasible to generate DSL-mimetic peptides with mutations that will not appear in the natural repertoire due to their deleterious effects on assembly.The gram-negative opportunistic pathogen Pseudomonas aeruginosa uses polar type IV pili (T4P) to attach to various materials, to move across surfaces via twitching motility, and to initiate host colonization and biofilm formation. T4P are widely distributed among bacteria and have been most extensively studied in Neisseria spp., Escherichia coli, Vibrio cholerae, and P. aeruginosa (8, 16, 42). T4P are divided into two major groups, type IVa and type IVb pili (T4aP and T4bP, respectively); there are several differences that distinguish these subfamilies (reviewed in reference 16). Most P. aeruginosa strains express T4aP composed of one of five different variants of the 15- to 17-kDa PilA protein (37).The crystal structures of N-terminally truncated or full-length forms of PilA from P. aeruginosa strains PAK and K122-4 have been solved (17, 18, 28, 34), as has the structure of the type IVa pilin from Neisseria gonorrhoeae MS11, called PilE (45). The pilins have a ladle-like structure, with a long, hydrophobic, kinked N-terminal alpha helix joined to a C-terminal domain of antiparallel beta-sheet architecture, terminating in a characteristic disulfide-bonded loop (DSL; also called the D-region). In a recent report describing the cryo-electron microscopy-derived ultrastructure of an assembled type IV pilus from N. gonorrhoeae, Craig and colleagues confirmed the predictions of earlier models that the N-terminal alpha helices of the subunits form the hydrophobic core of the fiber, with the hydrophilic C-terminal beta sheet and loop domains forming its outer surface (17).P. aeruginosa T4P mediate attachment to, and twitching motility on, an astonishing array of living and nonliving surfaces, from stainless steel and plastic to living cells (15, 20, 22, 25, 27, 44), contributing to the ability of this organism to cause opportunistic infections in a wide range of hosts. Twitching motility involves cycles of pilus extension, adherence, and subsequent pilus retraction that pulls the cell body forward (51). For twitching to occur, the pilus must adhere with sufficient strength that retraction of the pilus will result in translocation of the cell, overcoming the combination of surface tension and other cell surface adhesins that hold the cell body in place.Most bacterial pili, such as the types 1 and P pili of uropathogenic E. coli, are composed of separate structural (FimA and PapA) and adhesive (FimH and PapG) subunits, with the adhesive subunit present only at the tip of the pilus fiber (7, 32). P. aeruginosa T4P are unusual in this respect, in that the PilA subunit has been reported to act as both the main structural component and the tip adhesin (39, 50). The C-terminal DSL of the PilA subunit has been shown to mediate attachment of piliated P. aeruginosa to host cells and to abiotic surfaces such as stainless steel (25, 39, 50). This subdomain of PilA was shown by immunogold labeling studies to be exposed only at the pilus tip, suggesting that it is otherwise masked by adjacent subunits in the assembled pilus (39). These data are consistent with recent ultrastructural studies of N. gonorrhoeae T4P, which suggest that the C termini of the pilins are involved in intersubunit contacts throughout the length of the pilus fiber (17).To address the roles of specific residues within the DSL in host cell attachment, Wong and colleagues synthesized peptides corresponding to C-terminal residues 128 to 144 of the pilins from strains PAK and KB7, as well as analogues thereof containing Ala substitutions at each position (57). The peptides were oxidized to allow disulfide bond formation and used in a competition assay, measuring their ability to block binding of biotinylated PAK pili to buccal epithelial cells. Their study confirmed earlier observations that the Cys residues involved in disulfide bond formation contributed significantly to adhesin function and implicated a number of other residues in binding. However, a single adhesinotope common to both peptides could not be defined since they have only partial sequence identity. Conserved residues contributing to conformational elements, particularly type I and type II beta turns, were found to be important while a conserved hydrophobic residue (F137 in the PAK pilin) was not crucial for binding (57).As a prelude to studies examining the effects of sequence variation within the key DSL region on the adhesive capacity of the pilin subunit, we investigated the effects of PilA mutations on its multiple functions, including participation in protein secretion via the structurally related type II secretion (T2S) system in P. aeruginosa. A previous study (41) reported that PilA could form heterodimers with XcpT, the major pseudopilin of the Xcp T2S, and that PilA mutants were defective in T2S of proteases. In this work, the pilA gene from the laboratory strain PAO1 was mutagenized to generate single-residue variants of PilA that were expressed from an l-arabinose-inducible promoter in a pilA mutant background. This approach permitted the simultaneous interrogation of the effects of the mutations on pilin stability, assembly, and function in terms of twitching motility and pilus-specific bacteriophage susceptibility, as well as potential dominant-negative effects in the wild type upon induction. Here, we show that it is possible to identify single-residue variants of PilA that are affected in each step of pilus assembly and function.     

PilC of Neisseria meningitidis is involved in class II pilus formation and restores pilus assembly, natural transformation competence and adherence to epithelial cells in PilC-deficient gonococci

Type 4 pili produced by the pathogenic Neisseria species constitute primary determinants for the adherence to host tissues. In addition to the major pilin subunit (PilE), neisserial pili contain the variable PilC proteins represented by two variant gene copies in most pathogenic Neisseria isolates. Based upon structural differences in the conserved regions of PilE, two pilus classes can be distinguished in Neisseria meningitidis . For class I pili found in both Neisseria gonorrhoeae and N. meningitidis , PilC proteins have been implicated in pilus assembly, natural transformation competence and adherence to epithelial cells. In this study, we used primers specific for the pilC2 gene of N. gonorrhoeae strain MS11 to amplify, by the polymerase chain reaction, and clone a homologous pilC gene from N. meningitidis strain A1493 which produces class II pili. This gene was sequenced and the deduced amino acid sequence showed 75.4% and 73.8% identity with the gonococcal PilC1 and PilC2, respectively. These values match the identity value of 74.1% calculated for the two N. gonorrhoeae MS11 PilC proteins, indicating a horizontal relationship between the N. gonorrhoeae and N. meningitidis pilC genes. We provide evidence that PilC functions in meningococcal class II pilus assembly and adherence. Furthermore, expression of the cloned N. meningitidis pilC gene in a gonococcal pilC1,2 mutant restores pilus assembly, adherence to ME-180 epithelial cells, and transformation competence to the wild-type level. Thus, PilC proteins exhibit indistinguishable functions in the context of class I and class II pili.     

Insights into type IV pilus biogenesis and dynamics from genetic analysis of a C-terminally tagged pilin: a role for O-linked glycosylation

Type IV pili are surface organelles essential for pathogenicity of many Gram-negative bacteria. In Neisseria gonorrhoeae, the major subunit of type IV pili, PilE, is a target of its general O-linked glycosylation system. This system modifies a diverse set of periplasmic and extracellular gonococcal proteins with a variable set of glycans. Here we show that expression of a particular hexa-histidine-tagged PilE was associated with growth arrest. By studying intra- and extragenic suppressors, we found that this phenotype was dependent on pilus assembly and retraction. Based on these results, we developed a sensitive tool to identify factors with subtle effects on pilus dynamics. Using this approach, we found that glycan chain length has differential effects on the growth arrest that appears to be mediated at the level of pilin subunit-subunit interactions and bidirectional remodelling of pilin between its membrane-associated and assembled states. Gonococcal pilin glycosylation thus plays both an intracellular role in pilus dynamics and potential extracellular roles mediated through type IV pili. In addition to demonstrating the effect of glycosylation on pilus dynamics, the study provides a new way of identifying factors with less dramatic effects on processes involved in type IV pilus biogenesis.