Effect of genetic variation of CEBPA gene on body measurement and carcass traits of Qinchuan cattle

In our study, genetic variation in coding region of cattle CCAAT enhancer binding protein alpha(namely CEBPA)gene was detected by PCR-RFLP and DNA sequencing methods in 215 individuals from Qinchuan cattle breed. Two haplotypes (A and B) and three observed genotypes (AA, AB, and BB) were detected. The result of DNA sequence showed one mutation by comparisons with NC_007316. The mutation at nt963 (T>G) were located in coding region of the CEBPA gene. Associations between the CEBPA gene genetic variation and the carcass traits were revealed in Qinchuan cattle. Least squares analysis revealed a significant statistical effect of the CEBPA gene different genotypes on slaughter weight and carcass weight in Qinchuan cattle. Individuals with BB genotype showed higher slaughter weight and carcass weight than individuals with AA and AB genotypes. Therefore, these results suggest that the CEBPA gene is a strong candidate gene that affects carcass traits in Qinchuan cattle.     

秦川牛脂联素基因SNPs检测及其与胴体、肉质性状的相关性

利用PCR-SSCP结合测序技术对405头24月龄秦川牛脂联素基因SNPs位点进行检测, 运用SPSS统计程序中的GLM模型将检测到的SNPs位点与部分胴体及肉质性状的相关性进行了分析。结果检测到AA、AB、BB、CC、CD 5种基因型, 其中AB、BB型个体在脂联素基因第2外显子 64 bp处发现G→C突变, CD型个体第3外显子50 bp处发现C→T的突变, G→C导致谷氨酸(GGA)转化为谷氨酰胺(GCA), C→T导致丝氨酸(TCA)转化为亮氨酸(TTA)。方差分析结果表明: AA型个体的宰前活重、胴体重、眼肌面积显著高于BB型(P<0.05), 而在胴体腿臀围方面, AA型个体极显著高于AB型、BB型个体(P<0.01)。CD型个体的宰前活重、胴体腿臀围、皮下脂肪厚、背膘厚、嫩度都显著优于CC型个体(P<0.05)。脂联素基因该位点可能是影响秦川牛胴体及肉质性状的主效QTL或与之紧密连锁, 可作为秦川牛高档牛肉生产的候选分子标记。     

A novel 18-bp deletion mutation of the AMPD1 gene affects carcass traits in Qinchuan cattle

The objectives of the present study were focused on detecting deletion mutation in bovine AMPD1 gene, and analyzing its effect on body measurement and carcass traits in Qinchuan cattle by using DNA sequencing and agarose electrophoresis methods. The 198-bp PCR products of AMPD1 gene exhibited three genotypes and two alleles were revealed: A and B. The frequencies of genotype AA/AB/BB in Qinchuan populations was 0.7163, 0.2233 and 0.0605. The χ²-test analysis demonstrated that the breed was not in agreement with Hardy–Weinberg equilibrium (P < 0.05). The association of the 18-bp deletion mutation of AMPD1 gene with body measurement and carcass traits of Qinchuan cattle were analyzed. The cattle with AA genotype had slaughter weight and carcass weight than those with genotype AB (P < 0.01 or P < 0.05). These results suggest that the 18-bp deletion mutation may influence the carcass traits in Qinchuan cattle.     

牛FSHR基因第10外显子单核苷酸多态性及其与双胎性状的关系

以秦川牛和荷斯坦奶牛的双胎母牛和单胎母牛为实验材料 ,以牛的FSHR基因的第 10个外显子作为标记牛双胎性状的候选基因 ,用SNP法进行了多态检测 .结果发现 ,在秦川牛的双胎母牛中突变率 6 0 % (6 10 ) ,而在单胎母牛中突变率为 2 0 % (2 10 ) ;在荷斯坦奶牛中 ,双胎母牛突变率为31 2 5 % (5 16 ) ,单胎母牛突变率为 6 6 7% (1 15 ) ;由此可见双胎牛和单胎牛二者之间FSHR基因的第 10个外显子的突变率差异明显 .这表明 ,选择FSHR基因的第 10个外显子有可能作为双胎性状的候选基因 .序列分析发现 ,在FSHR基因的第 15 0 6位碱基发生了突变 (T→C) ,但氨基酸没有发生变化 .     

The role of BBS2 in regulating adipogenesis and the association of its sequence variants with meat quality in Qinchuan cattle

The BBS2 gene plays a vital role in human obesity and fat deposition. However, little is known about it in beef cattle. Therefore, this study investigates the function of BBS2 in the fat deposition of beef cattle and screens the effective SNPs marker for meat quality traits in cattle breeding. The expression of BBS2 is negatively correlated with marbling ratios of beef cattle. Moreover, the knockdown of BBS2 promoted adipogenesis and lipid accumulation of bovine preadipocytes by stimulating PPARγ, FABP4, and FASN expression (P < 0.01). Four novel SNPs in the exons of BBS2 in Chinese Qinchuan cattle were identified and of which the g.24226239C > T (Q527), g.24223562G > A (V441I), and g.24227851A > G (Q627R) were significantly associated with the meat quality of Qinchuan cattle (P < 0.01, P < 0.05). The findings suggested that BBS2 could be used as a candidate gene for meat quality improvement in Qinchuan cattle. Furthermore, these genotypes can be exploited as molecular markers in future beef breeding projects.     

Genetic variants in MYF5 affected growth traits and beef quality traits in Chinese Qinchuan cattle

Myogenic factor 5 plays actively roles in the regulation of myogenesis. The aims of this study are to identify the evolution information of MYF5 protein among 10 domestic and mammalian animals, to uncover the expression patterns of MYF5 gene in calves and adults of Qinchuan cattle, and to expose the genetic variants of the MYF5 gene and explore its effect on cattle growth traits and beef quality traits in Qinchuan cattle. The bioinformatics results showed that the MYF5 proteins highly conserved in different mammalian or domestic animals apart from chicken. The expression level of MYF5 gene in the heart, muscle, lung, large intestine and liver was greater than that of other tissues. PCR amplicons sequencing identified four novel SNPs at g.5738A>G, g.5785C>T and g.5816A>G in the 3rd exon region and g.6535A>G in the 3’ UTR. Genotypic frequencies of g.5785C>T was harshly deviated from the HWE (P < .05). Genetic diversity was low or intermediate for the four SNPs and those SNPs were in the weak linkage disequilibrium. Association analysis results indicated g.5785C>T, g.5816A>G and g.6535A>G significant effect on growth performance and beef quality traits of Qinchuan cattle. H1H3 diplotype had greater body size and better beef quality. All the results implicate that the MYF5 gene might be applied as a promising candidate gene in Qinchuan cattle breeding.     

Selective forces shaping diversity in the class I region of the major histocompatibility complex in dairy cattle

The major histocompatibility complex (MHC) is one of the most diverse regions of the mammalian genome. Diversity in MHC genes is integral to their function in the immune system, and while pathogens play a key role in shaping this diversity, the contribution of other selective forces remains unclear. The controlled breeding of cattle offers an excellent model for the identification and exploration of these forces. We characterized the MHC class I genes present in a sample of Canadian Holstein A.I. bulls and compared the results with those obtained in an earlier study. No evidence for a reduction in MHC diversity over 20 years was observed, but the relative frequency of some haplotypes had changed: the formerly rare A12 (w12B) haplotype had become the most common, together with A15, while A19, which dominated the earlier sample, had significantly reduced in frequency. Only 7% of bulls in the current study were MHC homozygous compared with the 14% expected under Hardy-Weinberg. To identify the selective forces at work, a gene substitution model was used to calculate the effects of MHC on selection traits using estimated breeding values for each bull. Significant associations between MHC and production, disease and fertility traits were identified, suggesting that MHC diversity is not merely shaped by disease in this controlled breeding system. The decrease in a common haplotype, the reduced number of homozygous bulls and the associations with disease and production traits together indicate that MHC diversity in dairy cattle is maintained by heterozygote advantage.     

Tetra-primer ARMS-PCR identifies the novel genetic variations of bovine HNF-4α gene associating with growth traits

Hepatocyte nuclear factor-4α (HNF-4α), a member of the hepatocyte nuclear factor family, plays an important role in regulating the expression of genes involved in the development, differentiation and normal function of liver and pancreatic β cells, as well as the maintenance of glucose homeostasis. Tetra-primer amplification refractory mutation system PCR (T-ARMS-PCR) is a new method offering fast detection and extreme simplicity at a negligible cost for SNP genotyping. In this paper, we characterize the polymorphisms of the bovine HNF-4α gene in three Chinese indigenous cattle breeds (n = 660). Six novel SNPs were identified including 1 mutation in the coding region and others in introns. The statistical analyses indicated that 4 SNPs (g.T53729C, g.A53861G, g.A65188C and g.T65444C) affected growth traits markedly (P < 0.05) in Qinchuan cattle (2 years after birth). Besides, haplotypes involving these 4 SNP sites in the bovine HNF-4α gene were identified and their effects on growth traits were also analyzed. The results showed that haplotypes 2, 7, 9 and 11 were predominant and accounted for 73.2%, 59.6%, and 67.1% in Qinchuan, Nanyang and Jiaxian cattle breeds, respectively. Hap9 (TAAT) was extremely predominant in all test populations, which suggested that individuals with Hap9 were more adapted to the environment. Furthermore, 4 combined haplotypes were constructed to guarantee the reliability of analysis results in Qinchuan cattle. There were also significant differences in body length (P < 0.05). These findings will benefit for the application of DNA marker related to the growth traits on marker-assisted selection (MAS), and improve the performance of beef cattle.     

Sequence variants of the <Emphasis Type="Italic">LCORL</Emphasis> gene and its association with growth and carcass traits in Qinchuan cattle in China

Molecular marker-assisted selection is a better way to satisfy the growing customer requirement with the development of beef cattle growth and breeding research. For now, quantitative trait locus (QTL) for cattle growth and carcass traits, just like body height, body length and carcass weight have been detected on bovine chromosome 6. In this study, ligand-dependent nuclear receptor corepressor-like (LCORL) was selected as the potential positional candidate gene located in chromosome 6 which is closely connected with the bovine growth and carcass traits. A total of 450 Qinchuan beef cattle were used to detect mutations in exon and its neighbouring region, and the promoter region of the bovine LCORL gene. The methods for SNPs detection were polymerase chain reaction-restriction fragment length polymorphism (PCR-RFLP) and created restriction site PCR (CRS-PCR), and the results of this study show that there were two variations in intron regions, the other four variations were located in the promoter region. Linkage disequilibrium analysis and haplotype analysis indicated that L78-Q4 had strong linkage disequilibrium, A T G C G C (16.2%) and G C G C A T (16.7%) had higher haplotype frequencies, G C A C A C (0.8%) and G T A C A T (0.7%) had lower haplotype frequencies. Correlation analysis indicated that SNP g. INT + 52098A >G was significantly associated with slaughter weight and carcass weight. Based on the research, we selected LCORL as the candidate gene that can contribute to improved marker-assisted selection for the meat performance of Qinchuan beef cattle.     

Exploring polymorphisms and associations of the bovine MOGAT3 gene with growth traits

Monoacylglycerol acyltransferase (MGAT3, also known as MOGAT3) catalyzes the synthesis of diacylglycerol (DAG) using 2-monoacylglycerol and fatty acyl coenzyme A. This enzymatic reaction is believed to be an essential and rate-limiting step for the absorption of dietary fat in the small intestine. However, similar research for the bovine MOGAT3 gene is lacking. Therefore, in this paper, polymorphisms of the bovine MOGAT3 gene were detected in 1145 individuals from five cattle breeds by DNA pooling, PCR-RFLP, and DNA sequencing methods. The results showed that 26 novel SNPs were identified, which included 16 mutations in the coding region and the others in the introns. Additionally, association analysis between two missense mutations, g.A229G and g.G1627A, and growth traits in Nanyang cattle up to 2 years of age and adult Qinchuan cattle was performed. The results indicated that polymorphisms were significantly associated with Nanyang cattle, but no convincing associations were observed for Qinchuan cattle for the studied traits.     

A novel polymorphism of the GDF₁₀ gene and its association with body measurement traits in Chinese indigenous cattle

Body measurement traits are known to play numerous important roles in the assessment of productivity and economic value. They are influenced by several factors, among which genetic factors are predominant. The gene GDF?? is involved in skeletal morphogenesis and is associated with body measurement traits. It may be an important candidate gene for marker-assisted selection. We used the PCR-SSCP technology to examine a possible association of the single nucleotide polymorphism (SNP) (G142A) of the bovine GDF?? gene with body measurement traits in 417 animals belonging to six different Chinese cattle populations: Xue long (Xl), Luxi (Lx), Qinchuan (Qc), Jiaxian red (Jx), Xianang (Xn), and Nanyang (Ny). In the Jx population, least squares analysis revealed significant effects on hip width, chest depth and chest circumference. The animals with the GG genotype had higher mean values than those with the GA genotype for all three traits. We conclude that the SNP of the GDF?? gene could be a very useful genetic marker for body traits in Jx cattle reproduction and breeding.     

Four SNPs of insulin-induced gene 1 associated with growth and carcass traits in Qinchuan cattle in China

The insulin-induced gene 1 (Insig-1) is a regulator of lipid metabolism and plays an important role in the sterol-mediated regulation of SREBP, SCAP and HMG-CoA reductase. We used PCR-RFLP and DNA sequencing to detect polymorphisms of the Insig-1 gene in 215 individuals of the Qinchuan cattle breed. Four SNPs [4366(A>G), 4534(T>C), 5001(T>C), and 5235(G>A)] were indentified. The association of the genetic viariation with growth and carcass traits (body length, withers height, hip width, slaughter weight, and carcass weight) was analyzed. The individuals with better performance had the GG genotype at locus A4366G, and CC genotypes at locus T4534C and locus T5001C. These could be used for beef cattle breeding improvement in China. Additionally, linkage disequilibrium analysis reflected that all mutations were in low linkage disequilibrium with each other. We concluded that polymorphisms in the Insig-1 gene are associated with growth and carcass traits and could be used for marker-assisted selection and management in beef cattle breeding programs.     

Impact of including growth,carcass and feed efficiency traits in the breeding goal for combined milk and beef production systems

Improving feed efficiency in dairy cattle could result in more profitable and environmentally sustainable dairy production through lowering feed costs and emissions from dairy farming. In addition, beef production based on dairy herds generates fewer greenhouse gas emissions per unit of meat output than beef production from suckler cow systems. Different scenarios were used to assess the profitability of adding traits, excluded from the current selection index for Finnish Ayrshire, to the breeding goal for combined dairy and beef production systems. The additional breeding goal traits were growth traits (average daily gain of animals in the fattening and rearing periods), carcass traits (fat covering, fleshiness and dressing percentage), mature live weight (LW) of cows and residual feed intake (RFI) traits. A breeding scheme was modeled for Finnish Ayrshire under the current market situation in Finland using the deterministic simulation software ZPLAN+. With the economic values derived for the current production system, the inclusion of growth and carcass traits, while preventing LW increase generated the highest improvement in the discounted profit of the breeding program (3.7%), followed by the scenario where all additional traits were included simultaneously (5.1%). The use of a selection index that included growth and carcass traits excluding LW, increased the profit (0.8%), but reduced the benefits resulted from breeding for beef traits together with LW. A moderate decrease in the profit of the breeding program was obtained when adding only LW to the breeding goal (−3.1%), whereas, adding only RFI traits to the breeding goal resulted in a minor increase in the profit (1.4%). Including beef traits with LW in the breeding goal showed to be the most potential option to improve the profitability of the combined dairy and beef production systems and would also enable a higher rate of self-sufficiency in beef. When considering feed efficiency related traits, the inclusion of LW traits in the breeding goal that includes growth and carcass traits could be more profitable than the inclusion of RFI, because the marginal costs of measuring LW can be expected to be lower than for RFI and it is readily available for selection. In addition, before RFI can be implemented as a breeding objective, the genetic correlations between RFI and other breeding goal traits estimated for the studied population as well as information on the most suitable indicator traits for RFI are needed to assess more carefully the consequences of selecting for RFI.     

SNP and haplotype analysis reveal IGF2 variants associated with growth traits in Chinese Qinchuan cattle

Insulin-like growth factor 2 (IGF2) is a potent cell growth and differentiation factor and is implicated in mammals’ growth and development. The objective of this study was to evaluate the effects of the mutations in the bovine IGF2 with growth traits in Chinese Qinchuan cattle. Four single nucleotide polymorphisms (SNPs) were detected of the bovine IGF2 by DNA pool sequencing and forced polymerase chain reaction–restriction fragment length polymorphism (forced PCR–RFLP) methods. We also investigated haplotype structure and linkage disequilibrium (LD) coefficients for four SNPs in 817 individuals representing two main cattle breeds from China. The result of haplotype analysis showed eight different haplotypes and 27 combined genotypes within the study population. The statistical analyses indicated that the four SNPs, combined genotypes and haplotypes are associated with the withers height, body length, chest breadth, chest depth and body weight in Qinchuan cattle population (P < 0.05 or <0.01). The mutant-type variants and mutant haplotype (Hap 8: ATGG; likely to be the beneficial QTN allele) was superior for growth traits; the heterozygote diplotype was associated with higher growth traits compared to wild-type homozygote. Our results provide evidence that polymorphisms in the IGF2 gene are associated with growth traits, and may be used for marker-assisted selection in beef cattle breeding program.     

Expression analysis, single nucleotide polymorphisms and combined genotypes in candidate genes and their associations with growth and carcass traits in Qinchuan cattle

The apolipoprotein E (ApoE) gene is an important component of plasma lipoprotein, and Fas apoptosis inhibitory molecule (FAIM) is a novel anti-apoptotic gene. In this study, we researched and discussed seven genes in eight different tissues in Qinchuan cattle by quantitative Real-time PCR. The result of analysis showed that ApoE and FAIM ₂ genes had a correlation with muscle and fat. PCR–RFLP was applied to analyze the genetic variations of the ApoE and FAIM ₂ genes and verify the effect on growth and carcass traits in a total of 365 Qinchuan cattles. The result of haplotype analysis showed that nine different haplotypes were identified among the four SNPs in ApoE and FAIM ₂ genes. The statistical analyses indicated that the four SNPs were significant association with growth and carcass traits (P < 0.05, N = 365); and the four SNPs were significant association between nine combined genotypes of candidate genes and growth and carcass traits. Taken together, our results provide the evidence that polymorphisms in candidate genes are associated with growth and carcass traits in Qinchuan cattle, and may be used as a possible candidate for marker-assisted selection and management in beef cattle breeding program.     

Novel Muscle-Specific Genes TCAP,TNNI1, and FHL1 in Cattle: SNVs,Linkage Disequilibrium,Combined Genotypes,Association Analysis of Growth Performance,and Carcass Quality Traits and Expression Studies

TCAP, TNNI1, and FHL1 regulate muscle growth and development. In this study, four single nucleotide variants (SNVs) were discovered in almost all of the exon and intron regions of the TCAP, TNNI1, and FHL1 genes using DNA pooled sequencing, polymerase chain reaction (PCR)-RFLP, and forced-PCR-RFLP methods in 576 cattle. Four SNVs were significantly associated with the growth performance and carcass quality traits of the cattle. In addition, the haplotype, haplotype frequency, and linkage disequilibrium coefficient of three sequence variants were also evaluated in the cattle population. Haplotype analysis demonstrated that eight haplotypes were present in the Qinchuan cattle population and no haplotypes were present in the Chinese Holstein population; haplotype 1 had the highest frequency in the Qinchuan (42.7%) population. Statistical analyses of 12 combined genotypes indicated that some were significantly associated with the growth performance and carcass quality traits of the Qinchuan cattle population. Moreover, the quantitative real-time polymerase chain reaction results demonstrated that the bovine TCAP, TNNI1, and FHL1 genes were exclusively expressed in muscle tissue. These data support the high potentials of the TCAP, TNNI1, and FHL1 as marker genes to improve the growth performance and carcass quality traits of Qinchuan cattle or other animals selection programs.     

MyoD基因对肉牛胴体性状影响的分析

用PCR技术克隆到MyoD基因的第二内含子, 采用PCR-SSCP方法研究了3个黄牛品种(鲁西牛、晋喃牛、秦川牛)及4个杂交肉牛(夏洛莱×鲁西牛、安格斯×鲁西牛、利木赞×鲁西牛、西门塔尔×鲁西牛)群体MyoD基因的多态性, 并分析了基因位点多态性与肉牛肉质性状的相关性。实验结果,在国内首次扩增出肉牛MyoD基因的第二内含子的全部序列, 共261 bp。用SSCP方法检测到MyoD基因内含子2有A和B两个等位基因。测序结果表明该座位的多态性是由于内含子二39 bp处C-T的突变和112 bp处C→G的突变造成的。等位基因B在中国地方品种的分布频率高于引进品种的杂交牛群体。c2检验的结果表明, 在该位点的除夏洛莱和安格斯杂交牛外, 其余五个群体(晋南、鲁西、秦川、西门塔尔杂交牛和利木赞杂交牛)均处于Hardy-Weinberg不平衡状态(P>0.05)。实验群体不同基因型与肉牛的宰前活重、胴体重、净肉重、高档肉重、眼肌面积等性状的影响差异极显著或显著(P<0.01或P<0.05), 并且AA型个体均高于AB型个体。     

Bovine GDF10 gene polymorphism analysis and its association with body measurement traits in Chinese indigenous cattle

The objective of this research was to detect bovine GDF10 gene polymorphism and analyze its association with body measurement traits (BMT) of animals sampled from 6 different Chinese indigenous cattle populations. The populations included Xuelong (Xl), Luxi (Lx), Qinchuan (Qc), Jiaxian red (Jx), Xianang (Xn) and Nanyang (Ny). Blood samples were taken from a total of 417 female animals stratified into age categories of 12–36 months. Polymerase chain reaction–single strand conformation polymorphism (PCR–SSCP) was employed to find out GDF10 single polymorphism nucleotide (SNPs) and explore their possible association with BMT. Sequence analysis of GDF10 gene revealed 3 SNPs in total: 1 in exon1 (G142A) and 2 in exon3 (A11471G, and T12495C). G142A and T12495C SNPs are both synonymous mutation. They showed 2 genotypes namely respectively (GG, GA) and (PP and PB). A11471G SNP is a missense mutation leading to the change of Alanine to Threonine amino acid. It showed three genotypes namely AA, BB and AB. Analysis of association of polymorphism with body measurement traits at the three locus showed that there were significant effects on BMT in Qc, Jx and Ny cattle population. These results suggest that the GDF10 gene might have potential effects on body measurement traits in the above mentioned cattle populations and could be used for marker-assisted selection.     

秦川牛IGF2基因SNPs检测及其与胴体、肉质性状的相关性

采用PCR-SSCP方法对186头24月龄秦川牛IGF2基因进行了SNPs多态性检测, 并将其与部分胴体和肉质性状进行关联分析。在IGF2基因120碱基处发现C→T 突变, 在279碱基处发现 A→G 突变。方差分析结果表明: BB、DD 两个位点与胴体性状中与宰前活重、胴体重、胴体长、胴体胸深、眼肌面积显著相关(P<0.05), 其中背部皮下脂肪厚达到差异极显著(P<0.01); 与肉质性状大理石花纹、嫩度、pH24 (牛肉排酸24 h后的酸度值)显著相关(P<0.05)。但是在胴体深、系水力指标中差异不显著(P>0.05)。A、D 等位基因是群体中的优势等位基因, AA、DD 基因型是优势基因型, 而含有B、D 等位基因的个体的胴体和肉质性状优于其他个体, 尤其有着极强脂肪沉积能力