Single molecule analysis of DNA replication

We describe here a novel approach for the study of DNA replication. The approach is based on a process called molecular combing and allows for the genome wide analysis of the spatial and temporal organization of replication units and replication origins in a sample of genomic DNA. Molecular combing is a process whereby molecules of DNA are stretched and aligned on a glass surface by the force exerted by a receding air/water interface. Since the stretching occurs in the immediate vicinity of the meniscus, all molecules are identically stretched in a size and sequence independent manner. The application of fluorescence hybridization to combed DNA results in a high resolution (1 to 4 kb) optical mapping that is simple, controlled and reproducible. The ability to comb up to several hundred haploid genomes on a single coverslip allows for a statistically significant number of measurements to be made. Direct labeling of replicating DNA sequences in turn enables origins of DNA replication to be visualized and mapped. These features therefore make molecular combing an attractive tool for genomic studies of DNA replication. In the following, we discuss the application of molecular combing to the study of DNA replication and genome stability.     

Single DNA molecule analysis: applications of molecular combing.

Dynamic changes to the genomic structure and to the DNA replication programme are important determinants of normal and abnormal cell development. To understand these changes and how they vary from cell to cell, single DNA molecules from both normal and abnormal cell populations must be examined and compared. Physical characterisation of single genomes at the kilobase level of resolution over large genomic regions is possible with molecular combing technology. An array of combed single DNA molecules is prepared by stretching molecules attached by their extremities to a silanised glass surface with a receding air-water meniscus. By performing fluorescent hybridisation on combed DNA, genomic probe position can be directly visualised, providing a means to construct physical maps and detect micro-rearrangements. Single-molecule DNA replication can also be monitored through fluorescent detection of incorporated nucleotide analogues on combed DNA molecules. These and other single-molecule applications of molecular combing are discussed in this paper and future developments of the technology are considered.     

Optical mapping and its potential for large-scale sequencing projects.

Physical mapping has been rediscovered as an important component of large-scale sequencing projects. Restriction maps provide landmark sequences at defined intervals, and high-resolution restriction maps can be assembled from ensembles of single molecules by optical means. Such optical maps can be constructed from both large-insert clones and genomic DNA, and are used as a scaffold for accurately aligning sequence contigs generated by shotgun sequencing.     

A new method for straightening DNA molecules for optical restriction mapping.

We have developed an improved method of straightening DNA molecules for use in optical restriction mapping. The DNA was straightened on 3-aminopropyltriethoxysilane-coated glass slides using surface tension generated by a moving meniscus. In our method the meniscus motion was controlled mechanically, which provides advantages of speed and uniformity of the straightened molecules. Variation in the affinity of the silanized surfaces for DNA was compensated by precoating the slide with single-stranded non-target blocking DNA. A small amount of MgCl2 added to the DNA suspension increased the DNA-surface affinity and was necessary for efficient restriction enzyme digestion of the straightened surface-bound DNA. By adjusting the amounts of blocking DNA and MgCl2, we prepared slides that contained many straight parallel DNA molecules. Straightened lambda phage DNA (48 kb) bound to a slide surface was digested by EcoRI restriction endonuclease, and the resulting restriction fragments were imaged by fluorescence microscopy using a CCD camera. The observed fragment lengths showed excellent agreement with their predicted lengths.     

A quantile method for sizing optical maps.

Optical mapping is an integrated system for the analysis of single DNA molecules. It constructs restriction maps (noted as "optical map" ) from individual DNA molecules presented on surfaces after they are imaged by fluorescence microscopy. Because restriction digestion and fluorochrome staining are performed after molecules are mounted, resulting restriction fragments retain their order. Maps of fragment sizes and order are constructed by image processing techniques employing integrated fluorescence intensity measurements. Such analysis, in place of molecular length measurements, obviates need for uniformly elongated molecules, but requires samples containing small fluorescent reference molecules for accurate sizing. Although robust in practice, elimination of internal reference molecules would reduce errors and extend single molecule analysis to other platforms. In this paper, we introduce a new approach that does not use reference molecules for direct estimation of restriction fragment sizes, by the exploitation of the quantiles associated with their expected distribution. We show that this approach is comparable to the current reference-based method as evaluated by map alignment techniques in terms of the rate of placement of optical maps to published sequence.     

DNA fiber-FISH staining mechanism.

Fluorescence in situ hybridization to DNA fibers (Fiber-FISH) is a high-resolution, wide-ranging physical DNA mapping method that finds increasing application in the study of pathological gene rearrangements. Here we present experiments designed to understand the nature of the discontinuous FISH signal patterns seen after Fiber-FISH. Use of a novel cisplatin-based chemical labeling method enabled us to produce intact biotin-labeled cosmid target DNA molecules. We monitored by immunofluorescence the fate of such cosmid targets during denaturation and hybridization. The same cosmid DNA labeled with digoxigenin by nick-translation was used to analyze the FISH probe signal distribution in a different color. The probe signals proved to be a subset of the target signals remaining after denaturation and hybridization. We argue that the discontinuity of probe signals in Fiber-FISH is mainly caused by loss of target DNA and limited accessibility due to in situ renaturation and attachment. Furthermore, we conclude that FISH sensitivity is determined by hybridization efficiency and not the ability to generate sufficient signal from small probes. (J Histochem Cytochem 48:743-745, 2000)     

BTA, a novel reagent for DNA attachment on glass and efficient generation of solid-phase amplified DNA colonies

The tricarboxylate reagent benzene-1,3,5-triacetic acid (BTA) was used to attach 5′-aminated DNA primers and templates on an aminosilanized glass surface for subsequent generation of DNA colonies by in situ solid-phase amplification. We have characterized the derivatized surfaces for the chemical attachment of oligonucleotides and evaluate the properties relevant for the amplification process: surface density, thermal stability towards thermocycling, functionalization reproducibility and storage stability. The derivatization process, first developed for glass slides, was then adapted to microfabricated glass channels containing integrated fluidic connections. This implementation resulted in an important reduction of reaction times, consumption of reagents and process automation. Innovative analytical methods for the characterization of attached DNA were developed for assessing the surface immobilized DNA content after amplification. The results obtained showed that the BTA chemistry is compatible and suitable for forming highly dense arrays of DNA colonies with optimal surface coverage of about 10 million colonies/cm² from the amplification of initial single-template DNA molecules immobilized. We also demonstrate that the dsDNA colonies generated can be quantitatively processed in situ by restriction enzymes digestion. DNA colonies generated using the BTA reagent can be used for further sequence analysis in an unprecedented parallel fashion for low-cost genomic studies.     

pH-dependent specific binding and combing of DNA.

Recent developments in the rapid sequencing, mapping, and analysis of DNA rely on the specific binding of DNA to specially treated surfaces. We show here that specific binding of DNA via its unmodified extremities can be achieved on a great variety of surfaces by a judicious choice of the pH. On hydrophobic surfaces the best binding efficiency is reached at a pH of approximately 5.5. At that pH a approximately 40-kbp DNA is 10 times more likely to bind by an extremity than by a midsegment. A model is proposed to account for the differential adsorption of the molecule extremities and midsection as a function of pH. The pH-dependent specific binding can be used to align anchored DNA molecules by a receding meniscus, a process called molecular combing. The resulting properties of the combed molecules will be discussed.     

Dynamic molecular combing: a 'low tech' method for genetic mapping and diagnosis

So much of molecular genetics involves invisible samples at the bottom of minuscule tubes, that the attraction of something you can actually see is virtually irresistible. Recent developments in high-resolution fluorescent in situ hybridization (FISH) are both visually appealing and a valuable addition to the repertoire of gene-mapping and diagnostic techniques. The latest of these, dubbed dynamic molecular combing allows precise, high-resolution mapping of markers on cloned or total genomic DNA. In this technique, a coverslip coated with silane is dipped into a DNA solution. After a few minutes' incubation, during which the ends of the DNA molecules bind to the coverslip, a small motorized device is used to withdraw the coverslip vertically, by its edge, at a constant rate of 300 microseconds⁻¹. The force exerted on the DNA molecules by the meniscus stretches all the molecules uniformly in the same direction, and they dry instantly onto the silanized surface as it is exposed to air. The result is a surface covered with a high density of parallel DNA molecules, which can then be probed with fluorescent-labelled markers and visualized under a miscroscope. Because of the constant stretching factor of 2 kb per micrometer of fibre length, no internal control is needed for calibration, unlike other recent fibre-FISH methods. In pilot experiments, the technique has been used successfully to measure microdeletions involving the tuberous sclerosis 2 gene, for fine-mapping and orienting of sets of contiguous cosmid clones (contigs) on a yeast artificial chromosome within its yeast genome, and to measure gaps in a cosmid contig by hybridizing pairs of cosmid probes to combed total human genomic DNA. Dynamic molecular combing will also be useful for a variety of applications in genetic diagnosis, such as mapping the breakpoints where segments of different chromosomes have been interchanged, and analysing sequence rearrangements within genes. Probes as small as 3 kb can be used when mapping cloned DNA; when total genomic DNA is the template, however, the probe needs to be at least 5 kb to enable the signal to be distinguished from background. The length of DNA that can be visualized in any one field of view, approximately 400-600 kb, is determined by the characteristics of the camera used to record the image and the objective on the microscope. The new equipment needed is simple and the protocol very straightforward, which should put it within the reach of most genetics laboratories. The motorized device used to withdraw the coverslip from the DNA solution at the required speed of 300 micrometer s⁻¹ will be available commercially from early 1998 (contact the authors of the Science paper for details). Alternatively, such a device could be readily constructed by most departmental workshops. The silane-coated coverslips are best prepared in the gaseous phase, especially for combing total genomic DNA, when a homogeneous surface is essential. The researchers in Paris and London who developed the technique are, therefore, also considering making the coverslips commercially available.     

Combing DNA on CTAB-coated surfaces

A fluorescence microscope (FM) coupled with an intensified charge-coupled device (ICCD) camera was used to investigate the combing of DNA on cetyltrimethyl ammonium bromide (CTAB)-coated glass surfaces. DNA molecules can be combed uniform and straight on CTAB-coated surfaces. Different combing characteristics at different pH values were found. At lower pH (ca. 5.5), DNA molecules were stretched 30% longer than the unextended and DNA extremities bound with CTAB-coated surfaces via hydrophobic interaction. At high pH values (e.g., 6.4 and 6.5), DNA molecules were extended about 10% longer and DNA extremities bound with CTAB-coated surfaces via electrostatic attraction. At pH 6.0, DNA molecules could be extended 30% longer on 0.2-mM CTAB-coated surfaces. CTAB cationic surfactant has both a hydrophobic motif and a positively charged group. So, CTAB-coated surfaces can bind DNA extremities via hydrophobic effect or electrostatic attraction at different pH values. It was also found that combing of DNA on CTAB-coated surfaces is reversible. The number of DNA base pairs binding to CTAB-coated surfaces was calculated.     

Optical PCR: Genomic analysis by long-range PCR and optical mapping

Optical mapping is an approach for the rapid, automated, non-electrophoretic construction of ordered restriction maps of DNA from ensembles of single molecules. Previously, we used optical mapping to make high-resolution maps of large insert clones such as bacterial artificial chromosomes (BAC) and large genomic DNA molecules. Here, we describe a combination of optical mapping and long-range polymerase chain reaction (PCR), in a process we term optical PCR, which enables automated construction of ordered restriction maps of long-range PCR products spanning human genomic loci. Specifically, we amplified three long PCR products, each averaging 14.6 kb in length, which span the 37-kb human tissue plasminogen activator (TPA) gene. PCR products were surface mounted in gridded arrays, and samples were mapped in parallel with either ScaI, XmnI, HpaI, ClaI, or BglII. A contig of overlapping high-resolution maps was generated, which agreed closely with maps predicted from sequence data. The data demonstrate an approach to construct physical maps of genomic loci where very little prior sequence information exists, since the only sequence needed is that required to anchor PCR primers. Large segments of genomic DNA (within the practical limits imposed by long-range PCR) can be mapped quickly and to high resolution without the use of cloning vectors. Received: 9 February 1999 / Accepted: 26 May 1999     

Determination of restriction enzyme activity when cutting DNA labeled with the TOTO dye family

Optical mapping, a single DNA molecule genome analysis platform that can determine methylation profiles, uses fluorescently labeled DNA molecules that are elongated on the surface and digested with a restriction enzyme to produce a barcode of that molecule. Understanding how the cyanine fluorochromes affect enzyme activity can lead to other fluorochromes used in the optical mapping system. The effects of restriction digestion on fluorochrome labeled DNA (Ethidium Bromide, DAPI, H33258, EthD-1, TOTO-1) have been analyzed previously. However, TOTO-1 is a part of a family of cyanine fluorochromes (YOYO-1, TOTO-1, BOBO-1, POPO-1, YOYO-3, TOTO-3, BOBO-3, and POPO-3) and the rest of the fluorochromes have not been examined in terms of their effects on restriction digestion. In order to determine if the other dyes in the TOTO-1 family inhibit restriction enzymes in the same way as TOTO-1, lambda DNA was stained with a dye from the TOTO family and digested. The restriction enzyme activity in regards to each dye, as well as each restriction enzyme, was compared to determine the extent of digestion. YOYO-1, TOTO-1, and POPO-1 fluorochromes inhibited ScaI-HF, PmlI, and EcoRI restriction enzymes. Additionally, the mobility of labeled DNA fragments in an agarose gel changed depending on which dye was intercalated.     

Combing the genome for genomic instability

Genomic instability is one of the major features of cancer cells. The clinical phenotypes associated with several human diseases have been linked to recurrent DNA rearrangements and dysfunction of DNA replication processes that involve unstable genomic regions. Analysis of these rearrangements, which are frequently submicroscopic and can lead to loss or gain of dosage-sensitive genes or gene disruption, requires the development of sensitive, high-resolution techniques. This will lead to a better understanding of the mechanisms underlying genome instability and a greater awareness of the role of chromosomal rearrangements in disease. A new technology that involves molecular combing, a method that permits straightening and aligning molecules of genomic DNA, should make possible a detailed analysis of genomic events at the level of single DNA molecules. Such a single molecule approach could help to elucidate important properties that are masked in bulk studies.     

Rapid DNA mapping by fluorescent single molecule detection

DNA mapping is an important analytical tool in genomic sequencing, medical diagnostics and pathogen identification. Here we report an optical DNA mapping strategy based on direct imaging of individual DNA molecules and localization of multiple sequence motifs on the molecules. Individual genomic DNA molecules were labeled with fluorescent dyes at specific sequence motifs by the action of nicking endonuclease followed by the incorporation of dye terminators with DNA polymerase. The labeled DNA molecules were then stretched into linear form on a modified glass surface and imaged using total internal reflection fluorescence (TIRF) microscopy. By determining the positions of the fluorescent labels with respect to the DNA backbone, the distribution of the sequence motif recognized by the nicking endonuclease can be established with good accuracy, in a manner similar to reading a barcode. With this approach, we constructed a specific sequence motif map of lambda-DNA. We further demonstrated the capability of this approach to rapidly type a human adenovirus and several strains of human rhinovirus.     

Analysis of DNA replication profiles in budding yeast and mammalian cells using DNA combing

DNA combing is a powerful method developed by Bensimon and colleagues to stretch DNA molecules on silanized glass coverslips. This technique provides a unique way to monitor the activation of replication origins and the progression of replication forks at the level of single DNA molecules, after incorporation of thymidine analogs, such as 5-bromo-2'-deoxyuridine (BrdU), 5-iodo-2'-deoxyuridine (IdU) and 5-chloro-2'-deoxyuridine (CldU) in newly-synthesized DNA. Unlike microarray-based approaches, this assay gives access to the variability of replication profiles in individual cells. It can also be used to monitor the effect of DNA lesions on fork progression, arrest and restart. In this review, we propose standard DNA combing methods to analyze DNA replication in budding yeast and in human cells. We also show that 5-ethynyl-2'-deoxyuridine (EdU) can be used as a good alternative to BrdU for DNA combing analysis, as unlike halogenated nucleotides, it can be detected without prior denaturation of DNA.     

A new DNA combing method for biochemical analysis

A simple molecular combing method for analysis of biochemical reactions, called the moving droplet method, has been developed. In this method, small droplets containing DNA molecules run down a sloped glass substrate, and this creates a moving interface among the air, droplet, and substrate that stretches the DNA molecules. This method requires a much smaller volume of sample solution than other established combing methods, allowing wider application in various fields. Using this method, λDNA molecules were stretched and absorbed to a glass substrate, and single-molecule analysis of DNA synthesis by DNA polymerases was performed.     

Rapid isolation of DNA from Dioscorea species suitable for PCR,restriction digestion and pathogen screening

The methods employed for DNA extraction from many plants is difficult because of the metabolites that interfere with DNA isolation procedures. We have developed a reliable and efficient method for isolating genomic DNA free from polysaccharide, polyphenols and protein contaminants from Dioscorea spp. The method involves inactivation of contaminant proteins by using CTAB/Proteinase K and precipitation of polysaccharides in the presence of high concentration of salt. The purity of genomic DNA was confirmed by A260/280 and A260/230 ratios calculated from the spectrophotometric readings and further by restriction analysis of the isolated DNA using restriction enzymes Eco RI. The total genomic DNA extracted by the new protocol was used for polymerase chain reaction amplification, RAPD analysis, restriction digestion and pathogen screening. The new protocol can be successfully used for both small- and large-scale preparation of genomic DNA from different tissues of Dioscorea spp. The quarantine of seed tubers and use of pathogen-free tubers for planting is a prerequisite for integrated disease management strategy. The protocol can be used for the isolation of genomic DNA from other crop plants too.     

Cloning and characterization of the ribosomal genes of the sea-urchin Paracentrotus lividus. Heterogeneity of the multigene family

A Paracentrotus lividus genomic library was constructed using sperm DNA prepared from a single animal. The DNA was fragmented by partial digestion with DNase II, sized on a preparative agarose gel and inserted in the Pst I site of pBR 322 by the dG X dC tailing method. Recombinant plasmids containing ribosomal DNA were isolated, a restriction map of the gene was determined and the 18S and 26S transcribed sequences were located by S1 protection mapping. The organization of the ribosomal genes in genomic DNA of individual animals and of a pool of animals was studied by blot-hybridization of the restriction fragments, using as probes nick-translated 32P-labelled cloned ribosomal DNA fragments or 18S and 26S sea-urchin ribosomal RNA. The repeat length of the ribosomal unit was about 10.5 X 10(3) bases. A comparison of the restriction patterns of DNA from different animals showed a marked sequence heterogeneity in the spacer region of these genes. Variations of about 200 base pairs were detectable in the length of the spacer of some individuals.     

A simple method for sequencing small DNAs by introducing precise overlapping ends into restriction digestion fragments.

A method has been devised whereby certain complete restriction digestions can have short overlaps of unique sequence incorporated into the fragments during cloning. Thus one can identify when the DNA fragments are contiguous. Here, this technique is used to produce a contig for a 2.5 kb fragment of genomic DNA. This is a simple approach to ordering digestion fragments without necessarily performing restriction mapping. It is envisaged that this technique will be useful for sequencing cDNAs and small genomic fragments.     

Aromatic aldehyde and hydrazine activated peptide coated quantum dots for easy bioconjugation and live cell imaging

We present a robust scheme for preparation of semiconductor quantum dots (QDs) and cognate partners in a conjugation ready format. Our approach is based on bis-aryl hydrazone bond formation mediated by aromatic aldehyde and hydrazinonicotinate acetone hydrazone (HyNic) activated peptide coated quantum dots. We demonstrate controlled preparation of antibody--QD bioconjugates for specific targeting of endogenous epidermal growth factor receptors in breast cancer cells and for single QD tracking of transmembrane proteins via an extracellular epitope. The same approach was also used for optical mapping of RNA polymerases bound to combed genomic DNA in vitro.