Construction of small RNA cDNA libraries for deep sequencing

Small RNAs (21-24 nucleotides) including microRNAs (miRNAs) and small interfering RNAs (siRNAs) are potent regulators of gene expression in both plants and animals. Several hundred genes encoding miRNAs and thousands of siRNAs have been experimentally identified by cloning approaches. New sequencing technologies facilitate the identification of these molecules and provide global quantitative expression data in a given biological sample. Here, we describe the methods used in our laboratory to construct small RNA cDNA libraries for high-throughput sequencing using technologies such as MPSS, 454 or SBS.     

A method for recovering strand-specific probes from nick-translated DNA fragments

A method of preparing strand-specific probes for DNA X DNA or DNA X RNA hybridizations is described. Double-stranded DNA fragments are first isolated from any recombinant DNA clone containing the desired sequence, and then labeled in vitro by nick-translation (T. Maniatis, A. Jeffrey, and D. G. Kleid (1975) Proc. Natl. Acad. Sci. USA 72, 1184-1188; P. W. J. Rigby, M. Dieckmann, C. Rhodes, and P. Berg (1977) J. Mol. Biol. 113, 237-251). Sequences homologous to the desired strand are captured by annealing the denatured nick-translate to viral strands of an appropriate M13 clone, and recovered by elution of the resulting hybrids from a column of agarose A50M (Bio-Rad). By this method, separate probes with specificity to either strand, as well as the double-stranded probe, may conveniently be prepared from a single nick-translation reaction. Probes may be obtained which are homologous either to the full length of the cloned region or to selected portions thereof by selecting appropriate M13 clones for annealing. The probe is recovered as a population of fragments several hundred bases or less in length, which have been found ideal for saturating liquid hybridizations, and should be similarly well suited for in situ hybridizations to cytological preparations.     

An optimized freeze-squeeze method for the recovery of DNA fragments from agarose gels

A procedure for quick and simple elution of DNA from agarose gels is presented. After electrophoresis, bands of interest are cut out of the gel and the slices are equilibrated in a neutral salt buffer. The slices are then frozen and centrifuged through a filtration assembly whereby the DNA-containing buffer is squeezed out. The method is simple, quick, and suitable for the safe handling of small amounts of DNA (less than 1 microgram). The isolated DNA is susceptible to any enzymatic reaction and also to chemical sequencing. The method is most useful for rapid preparation of specifically end-labeled DNA fragments (e.g., for sequencing), but may also be utilized for any other preparative applications.     

An optimized preparation method to obtain high-quality RNA from dry sunflower seeds

In an attempt to isolate high-quality, intact total RNA from sunflower (Helianthus annuus) seeds for investigation of the molecular mechanisms of mutations, we tested various procedures, using kits, including RNAiso Plus, RNAiso Plus+RNAiso-mate for Plant Tissue, Trizol, and the Qi method, but no high-quality total RNA of high integrity was obtained with any of these methods, probably due to the high content of polyphenols, polysaccharides, and secondary metabolites in mature sunflower seeds. Modifications were made to the Qi method. To avoid polyphenol oxidation, frozen dry seeds free of the seedcase were ground in a mortar with an equal amount of PVP30, and the fine ground powder was transferred to an extraction buffer with 2% PVP30 (w/v), 5% β-mercaptoethanol (v/v) and LiCl (8 M). A sample homogenate was extracted with chloroform prior to acidic phenol-chloroform extraction. The total RNA was precipitated with 1/4 volume of NaAc and 2 volumes of absolute ethanol to prevent contamination by polysaccharides. The yield of total RNA was 29.95 μg/100 mg husked dry seeds; the ratios of A260/A230 and A260/A280 were 2.44 and 2.09, respectively. Electrophoretic analysis clearly showed 28S and 18S ribosomal RNA bands. Using the extracted RNA, a fragment of the actin gene was successfully expressed by RT-PCR. This modified protocol is suitable for isolating high-quality total RNA from sunflower seeds for molecular research.     

An efficient quantitation method of next-generation sequencing libraries by using MiSeq sequencer

Library quantitation is a critical step to obtain high data output in Illumina HiSeq sequencers. Here, we introduce a library quantitation method that uses the Illumina MiSeq sequencer designated as quantitative MiSeq (qMiSeq). In this procedure, 96 dual-index libraries, including control samples, are denatured, pooled in equal volume, and sequenced by MiSeq. We found that relative concentration of each library can be determined based on the observed index ratio and can be used to determine HiSeq run condition for each library. Thus, qMiSeq provides an efficient way to quantitate a large number of libraries at a time.     

Complementary strand-specific sequences from unique fragments of adenovirus type 2 DNA for hybridization-mapping experiments

Separation of the complementary strands of adenovirus type 2 DNA by poly(U,G)-CsCl density gradient centrifugation permitted studies of Ad2³ DNA renaturation with independently variable concentrations of each complementary strand. Single-stranded DNA was isolated by hydroxylapatite chromatography following exhaustive incubation under such conditions, and was found to selectively represent sequences of the complement present in excess during the incubation. This result was exploited in a general method for isolation of complementary strand-specific sequences of radioactively labeled Ad2 DNA or restriction enzyme fragments of Ad2 DNA. Liquid phase saturation-hybridization experiments were carried out with labeled DNA representing each complementary strand of the six endo R.EcoRI cleavage fragments of Ad2 DNA and unlabeled messenger RNA prepared from HeLa cells late after productive infections with Ad2. The results were combined with the known endo R.EcoRI cleavage map of Ad2 DNA to construct a low-resolution map showing physically separated regions, on both complementary strands of Ad2 DNA, represented in mRNA late after infection.     

Acyclic identification of aptamers for human alpha-thrombin using over-represented libraries and deep sequencing

Background

Aptamers are oligonucleotides that bind proteins and other targets with high affinity and selectivity. Twenty years ago elements of natural selection were adapted to in vitro selection in order to distinguish aptamers among randomized sequence libraries. The primary bottleneck in traditional aptamer discovery is multiple cycles of in vitro evolution.

Methodology/Principal Findings

We show that over-representation of sequences in aptamer libraries and deep sequencing enables acyclic identification of aptamers. We demonstrated this by isolating a known family of aptamers for human α-thrombin. Aptamers were found within a library containing an average of 56,000 copies of each possible randomized 15mer segment. The high affinity sequences were counted many times above the background in 2–6 million reads. Clustering analysis of sequences with more than 10 counts distinguished two sequence motifs with candidates at high abundance. Motif I contained the previously observed consensus 15mer, Thb1 (46,000 counts), and related variants with mostly G/T substitutions; secondary analysis showed that affinity for thrombin correlated with abundance (K_d = 12 nM for Thb1). The signal-to-noise ratio for this experiment was roughly 10,000∶1 for Thb1. Motif II was unrelated to Thb1 with the leading candidate (29,000 counts) being a novel aptamer against hexose sugars in the storage and elution buffers for Concanavilin A (K_d = 0.5 µM for α-methyl-mannoside); ConA was used to immobilize α-thrombin.

Conclusions/Significance

Over-representation together with deep sequencing can dramatically shorten the discovery process, distinguish aptamers having a wide range of affinity for the target, allow an exhaustive search of the sequence space within a simplified library, reduce the quantity of the target required, eliminate cycling artifacts, and should allow multiplexing of sequencing experiments and targets.     

A method for sequencing restriction fragments with dideoxynucleoside triphosphates.

A rapid enzymatic approach is described for the sequence analysis of a 5' terminally labelled restriction fragment. It involves limited nicking of the strands of the molecule throughout the sequence by pancreatic DNAase I. The 3' hydroxyl groups exposed by each nick are then used to prime chain extension by DNA polymerase I in four separate reactions. Each reaction uses one of the four chain terminating dideoxynucleoside triphosphates (ddNT-PSs), together with the four deoxynucleoside triphosphates (dNTPs). In a single reaction all the 3' ends are terminated in positions of the same base, which is different for each of the four reactions. When the products of these reactions are resolved by gel electrophoresis according to size, a sequence can be deduced from the pattern of radioactive bands. Sequences can be determined onwards from 10-20 residues from the 5' labelled end. The length of sequence which can be determined is only limited by the resolution of the gel.     

The method of template construction for sequencing extended DNA fragments

A rapid and convenient method was proposed for constructing insertional mutants in the sequencing of extended DNA fragments. The gist is insertion of an antibiotic resistance gene in plasmid DNA digested with DNase I. DNase I provides for a uniform distribution of insertion sites along the plasmid, and the background is low owing to antibiotic-based selection. The method requires neither high quality nor large amounts of plasmid DNA (which is especially important with low-copied plasmids), yields the results independent of the plasmid nucleotide sequence, and allows highly accurate analysis and ordering of the insertional mutants.     

Simple preparation method of PCR fragments for automated DNA sequencing

In an effort to find a simple and inexpensive purification method of polymerase chain reaction (PCR) reaction before cycle sequencing reaction, we compared a commercial system with a precipitation protocol performed in our laboratory. We found that, particularly with small PCR products, our method works with greater success than the method compared. Our precipitation method may be used on a larger PCR fragment before cycle sequencing reaction as well. Furthermore, it has the advantage of being simple as the well-known dilution method; in contrast to the dilution method, the precipitation method removes excess primers as well as possible primer dimers.