Fibroblast response is enhanced by poly(L-lactic acid) nanotopography edge density and proximity

The development of scaffolds for use in tissue engineering applications requires careful choice of macroscale properties, such as mechanical characteristics, porosity and biodegradation. The micro- and nano-scale properties of the scaffold surface are also an important design criterion as these influence cell adhesion, proliferation, and differentiation. The cellular response is known to be affected by surface topography but the mechanisms governing this remain unclear. Homogenous poly(L-lactic acid) was textured with surface nanotopographies by two-stage replication molding of heterogeneous demixed polymer films. Initial cell adhesion was improved on nanotextured surfaces compared with smooth controls, but subsequent cell density was significantly reduced on the roughest surfaces. Improvements in cell response were found to correlate with focal contact and actin microfilament development. Cell response was found to trend both with the surface density of topography edges and with inter-topography spacing, indicating possible roles for edges stimulating cell adhesion/proliferation or for spacing to modulate the ability of integrin-ligand bonds to cluster and form focal adhesions. This study furthers understanding of the geometric properties of surface nanotopographies that affect cellular response. It is hoped that identification of the mechanisms governing cell-topography interactions will allow rule-based design of biomaterial surface to engineer specific cellular responses.     

Adsorption of plasmid DNA onto N,N'- (dimethylamino)ethyl-methacrylate graft-polymerized poly-L-lactic acid film surface for promotion of in-situ gene delivery

The surface of biodegradable poly-L-lactic acid (PLLA) film was modified with N,N'-(dimethylamino)ethyl-methacrylate (DMAEMA) via UV-induced graft copolymerization, and plasmid DNA molecules were adsorbed onto the surface of modified PLLA film by electrostatic interactions with cationic DMAEMA polymer. We characterized the structure of the modified PLLA film surface by Fourier transform infrared attenuated total reflection (FTIR-ATR) spectroscopy and X-ray photoelectron spectroscopy (XPS). The weight-average molecular weight (Mw) of grafted DMAEMA polymer chains was estimated from the elution time of gel filtration chromatography. C.I. Acid Orange 7 dyeing results indicated that graft density of DMAEMA on PLLA film increased with the UV irradiation time and then reached a saturated value. DNA adsorption density was proportioned to graft density of DMAEMA. Mouse fibroblast L929 cell line was cultured on modified PLLA films, and cell viability and gene transfection efficiency were monitored after 2 days culture. It was found that the DMAEMA grafted PLLA film had obvious cytotoxicity to the cells. On the contrary, cytotoxicity of the surface was highly decreased after adsorption with plasmid DNA. This DNA adsorbed DMAEMA modified PLLA showed the ability to deliver DNA into mammalian cells cultured on the surface with high-transfection efficiency at a low DNA amount. The present results suggest that the DMAEMA grafted PLLA has potentiality to be used as a safe and effective gene delivery system in gene-activated materials.     

Primordial germ cell differentiation of nuclear transfer embryonic stem cells using surface modified electroconductive scaffolds

A combination of nanotopographical cues and surface modification of collagen and fibronectin is a potential platform in primordial germ cells (PGCs) differentiation. In the present study, the synergistic effect of nanotopography and surface modification on differentiation of nuclear transfer embryonic stem cells (nt-ESCs) toward PGC lineage was investigated. In order to achieve this goal, poly-anyline (PANi) was mix within poly-l-lactic acid (PLLA). Afterward, the random composite mats were fabricated using PLLA and PANi mix solution. The nanofiber topography notably upregulated the expressions of prdm14, mvh and c-kit compared with tissue culture polystyrene (TCP). Moreover, the combination of nanofiber topography and surface modification resulted in more enhancement of PGCs differentiation compared with non-modified nanofibrous scaffold. Additionally, gene expression results showed that mvh and c-kit were expressed at higher intensity in cells exposed to collagen and fibronectin rather than collagen or fibronectin solitary. These results demonstrated the importance of combined effect of collagen and fibronectin in order to develop a functional extracellular matrix (ECM) mimic in directing stem cell fate and the potential of such biofunctional scaffolds for treatment of infertility.     

The roles of RGD and grooved topography in the adhesion, morphology, and differentiation of C2C12 skeletal myoblasts

Both chemical and topographic cues are crucial for the development of skeletal muscle. In this study, the relative roles of both signals in regard to cell adhesion, morphology, and differentiation of C2C12 skeletal myoblasts were investigated. Grooved polystyrene substrates containing grooves with approximately 900 nm in width with 600 nm ridge spans and 665 nm in depth were conjugated with the cell adhesion peptide arginine-glycine-aspartic acid (RGD). RGD conjugation significantly enhanced the adhesion, growth and differentiation of C2C12 cells. On the other hand, anisotropic topography primarily directed the direction and alignment of myoblasts and myotubes. The results in this study provide information regarding the relative roles of chemical and topographic cues in musculoskeletal myogenesis, and are of interest to applications in muscle tissue engineering.     

Phase structure and enzymatic degradation of poly(L-lactide)/atactic poly(3-hydroxybutyrate) blends: an atomic force microscopy study

Phase structures and enzymatic degradation of poly(l-lactide) (PLLA)/atactic poly(3-hydroxybutyrate) (ata-PHB) blends with different compositions were characterized by using atomic force microscopy (AFM). Differential scanning calorimetry (DSC) thermograms of PLLA/ata-PHB blends with different compositions showed two glass transition temperatures, indicating that the PLLA/ata-PHB blends are immiscible in the melt. Surface morphologies of the thin films for PLLA/ata-PHB blends were determined by AFM. Phase separated morphology was recognized from the AFM topography and phase images. The domain size of the components was dependent on the blend ratio. Enzymatic degradation of the PLLA/ata-PHB blends was performed by using both PHB depolymerase and proteinase K. Either PLLA or ata-PHB domains were eroded depending on the kinds of enzyme. Surface morphologies after enzymatic degradation have revealed the phase structure along the depth direction. Enzymatic adsorption of PHB depolymerase was examined on the surface of PLLA/ata-PHB blends. The enzyme molecules were found on both domains of the binary blends. The larger number of enzyme molecules was found on the PLLA domains relative to those on the ata-PHB domains, suggesting the higher affinity of the enzyme against PLLA domain.     

Synthesis, solid-state structure, and surface properties of end-capped poly(L-lactide)

End-capped poly(L-lactide) (PLLA) samples with dodecyl or 2-(2-(2-methoxyethoxy)ethoxy)ethyl (MEEE) ester were synthesized by ring-opening polymerization of L-lactide in the presence of zinc dodecanoxide or zinc 2-(2-(2-methoxyethoxy)ethoxy)ethoxide as a catalyst, respectively. On the basis of NMR analysis, it was confirmed that the carboxylic acid chain ends of PLLA molecules were selectively substituted by dodecyl or MEEE ester groups. To evaluate the wettability on the surface of end-capped PLLA films, the advancing contact angle (thetaa) with water was measured. The amorphous PLLA films showed relatively similar thetaa values regardless of the chemical structure of the polymer chain end. In contrast, the thetaa values of semicrystalline films were varied over a wide range, dependent on the chemical structure of the chain end. In addition, the thetaa values of dodecyl ester end-capped PLLA film with low molecular weight increased with an increase in the crystallization temperature. Both the crystallinity and lamellar thickness of dodecyl ester end-capped PLLA films increased with the crystallization temperature. These results suggest that the segregation of the chain ends on the PLLA film surface was strongly affected by the crystallization conditions.     

Improved blood biocompatibility of composite film of chitosan/carbon nanotubes complex

Single-walled carbon nanotubes are novel molecular-scale wires having excellent anti-adhesion properties with regard to platelets. On the other hand, chitosan is a partially de-acetylated derivative of chitin that has a critical role in cell attachment and growth. The aim of this study was to investigate how carbon nanotubes improve the blood biocompatibility of chitosan film. We prepared composite films with various concentrations of chitosan/carbon nanotubes (CS/CNTs) (1.3–6.3 wt%). The sample surfaces were characterized by Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and contact angle measurements. The surface characterization revealed that the surface of the CS/CNTs composite film became more hydrophobic with increasing amounts of CNTs. Cell attachment tests using bovine aortic endothelial cells (BAECs) indicated that CS/CNTs composite films retained their cell adhesion ability. The blood compatibility of the CS/CNTs composite films was evaluated using the blood platelet adhesion and activation tests in vitro. Platelet adhesion results confirmed that platelet adhesion and the formation of a platelet network were inhibited on composite films with higher concentrations of CNTs (5.1 wt%). Our experimental results show that the novel composite film containing CS/CNTs possesses two paradoxical characteristics, namely, good adherence of endothelial cells and minimum adherence and activation of platelets, making this film a promising antithrombogenic material for use in the biomedical field.     

Structural effects of terminal groups on nonenzymatic and enzymatic degradations of end-capped poly(L-lactide)

Poly(L-lactide) (PLLA) with various alkyl ester chain end groups were synthesized by ring-opening polymerization of L-lactide in the presence of zinc alkoxide as a catalyst. The structural effect of chain end groups on the rate of enzymatic and nonenzymatic degradations for amorphous films of PLLA were investigated at 37 degrees C in a Tris-HCl buffer solution (pH 8.6) with proteinase K and at 60 degrees C in a phosphate buffer solution (pH 7.4), respectively. The rate of enzymatic degradation for PLLA films was dependent on the carbon numbers of alkyl ester chain end groups, and the rates of PLLA samples with dodecyl (C12), tridecyl (C13), and tetracocyl (C14) ester end groups were much lower than those of the other samples. The surface morphologies of PLLA films after enzymatic degradation were characterized by scanning electron microscopy. After the enzymatic degradation, non-end-capped PLLA, PLLA with methyl (C1) and hexyl (C6) ester chain ends, were degraded homogeneously by proteinase K and the film surface was very smooth. In contrast, the PLLA with alkyl ester chain ends of carbon numbers over 12 were degraded heterogeneously by the enzyme, and the sponge-like network structure was formed on the film surface. These results indicated that the long alkyl ester groups at the chain ends of PLLA molecules aggregated in the amorphous films and the erosion rate was depressed due to the coverage of the aggregated terminal groups on the film surface. For the nonenzymatic degradation, the molecular weight of non-end-capped PLLA was remarkably decreased with progress of degradation. In contrast, the molecular weight of the end-capped PLLA gradually reduced at the initial stage of degradation and then the rate of degradation was accelerated. The decreases of molecular weight of PLLA by autocatalyzed degradation were retarded by the capping of carboxyl chain ends.     

Enzymatic, alkaline, and autocatalytic degradation of poly(L-lactic acid): effects of biaxial orientation

The hydrolytic degradation of biaxially oriented and de-oriented (melt-crystallized) poly(l-lactic acid) (PLLA) films was investigated in Tris-HCl-buffered solution (pH 8.6) with proteinase K, alkaline solution, and phosphate-buffered solution (pH 7.4) by the use of gravimetry, gel permeation chromatography, differential scanning calorimetry, and scanning electron microscopy. Biaxial orientation disturbed the proteinase K-catalyzed enzymatic degradation of PLLA films and the effects of biaxial orientation overcame those of crystallinity. The former may be due to the fact the enzyme cannot attach to the extended (strained) chains in the amorphous regions of the biaxially oriented PLLA film or cannot catalyze the cleavage of the strained chains. Another probable cause is that the enzyme can act only at the film surface of the biaxially oriented PLLA film, in marked contrast with the case of the de-oriented PLLA films where enzymatic degradation can proceed beneath the spherulitic crystalline residues. The effects of biaxial orientation on the alkaline and autocatalytic degradation of the PLLA films were insignificant for the periods studied here. The crystallinity rather than the biaxial orientation seems to determine the alkaline and autocatalytic degradation rates of the PLLA films. The accumulation of crystalline residues formed as a result of selective cleavage and removal of the amorphous chains was observed for the de-oriented PLLA films, but not for the biaxially oriented PLLA film, when degraded in the presence of proteinase K. This means the facile release of formed crystalline residues from the surface of the biaxially oriented PLLA film during enzymatic degradation, due to the fact that the crystalline regions of the biaxially oriented PLLA film were oriented with their c axis parallel to the film surface.     

The influence of elemental composition and surface topography on adhesion,proliferation and differentiation of osteoblasts

The influence of elemental composition and surface topography of substrates on the adhesion, proliferation and early differentiation stages of mouse osteoblasts, line MC3T3-E1, cultured on the surface of titanium and multicomponent bioactive nanostructured films (MuBiNaFs) Ti-Ca-(P)-C-O-N and Ti-Ca-Si-C-O-N has been studied. Osteoblasts spread both on the surface of uncoated titanium samples and on the samples coated with the films and had more elongated and irregular shape than the cells cultured on control glass substrate. Immunofluorescence study has shown that osteoblasts formed straight actin bundles associated with focal contacts. Osteoblasts on titanium films formed fewer focal contacts than the cells cultured on Ti-Ca-(P)-C-O-N films. The sandblast treatment did not affect the distribution of the focal contacts and actin structures within the cells. Osteoblasts actively divided on the surface of Ti-Ca-(P)-C-O-N and Ti-Ca-Si-C-O-N films and alteration of surface topography did not affect their growth rate. The quantitative colorimetrical test on alkaline phosphatase activity has shown that modification of surface topography does not affect the level of osteoblastic differentiation. Thus, the elemental composition plays an important role in the interaction of osteoblasts with the surface of films, while the modification of the surface topography in the range of S _q from 0.4 to 1 μm does not influence adhesion, proliferation, and differentiation of osteoblasts.     

Hepatocyte adhesion on a poly[N-p-vinylbenzyl-4-O-beta-D-galactopyranosyl-D-glucoamide]-coated poly(L-lactic acid) surface

A surface of poly(l-lactic acid) (PLLA) was modified by coating with poly[N-p-vinylbenzyl-4-O-beta-d-galactopyranosyl-d-glucoamide] (PVLA), which was employed to improve the hepatocyte adhesion owing to its amphiphilic property and the presence of a hepatocyte recognition motif. We characterized the surface properties through water contact angle, electron spectroscopy for chemical analysis (ESCA), and scanning probe microscopy (SPM). The effect of PVLA coating on the efficiency of hepatocyte adhesion was evaluated by protein assay and optical microscopy. The surface morphology was under the influence of the concentration of PVLA coating solution and it played a critical role in hepatocyte adhesion. It was confirmed that galactose moieties in PVLA, which can bind to the asialoglycoprotein receptor (ASGPR) on hepatocytes, have a more dominant effect on hepatocyte adhesion than enhanced hydrophilicity. We suggest that the PVLA-PLLA system will be a useful method to improve hepatocyte cell seeding and adhesion onto scaffold matrices.     

Surface composition and morphology of starch,amylose, and amylopectin films

The surfaces of solution-cast films of starch, amylose, and amylopectin were examined with scanning electron microscopy (SEM), atomic force microscopy (AFM), electron spectroscopy for chemical analysis (ESCA), and time-of-flight secondary ion mass spectrometry (ToF-SIMS). The surface topography visualized by SEM showed that amylopectin films were very smooth whereas amylose and starch films were rougher. It appears that crystallinity or phase separation in the bulk of the film affects the surface topography. AFM showed that the outmost surfaces of all films were covered with small protrusions, 15-35 nm wide and 1-4 nm high. Studies with ESCA revealed the presence of 3-8% nitrogen on the surfaces. ToF-SIMS indicated that the nitrogen originates from protein because ionic fragments from amino acids and the peptide backbone were found. Extracts from the top surface layer of the starch film showed protein bands in gel electrophoresis (SDS-PAGE) around 60 kDa, which is in the same molecular weight range as the biosynthesizing enzyme GBSS I present in starch granules. The proteins apparently phase separated during film formation and migrated to the surface, resulting in an extensive enrichment of proteins in the film surface, where about 8% of the protein is present in the top 0.01% of the film. We believe that the protrusions observed with AFM could be one or a few proteins aggregated side by side.     

Cell adhesion and morphology in porous scaffold based on enantiomeric poly(lactic acid) graft-type phospholipid polymers

Poly(D-lactic acid) (PDLA) and poly(L-lactic acid) (PLLA) macromonomers were synthesized for preparation of a novel cytocompatible polymer. The cytocompatible polymer was composed of 2-methacryloyloxyethyl phosphorylcholine (MPC), n-butyl methacrylate (BMA), and the enantiomeric PLLA (or PDLA) macromonomer. The degree of polymerization of the lactic acid in the PLLA and PDLA segments was designed to be ca. 20. The copolymer-coated surface was analyzed with static contact angle by water. From the result, the PLLA (or PDLA) segment and MPC unit were located on the coated surface, and the monomer unit in the copolymer was reconstructed by contacting water. Fibroblast cell culture was performed to evaluate cell adhesion on the coated surface, and the cell morphology was observed. The number of cell adhesion is correlated with the PL(D)LA content, and the cell morphology is correlated with the MPC unit content. The porous scaffold was prepared by the formation of a stereocomplex between the PLLA and PDLA, and the cell adhesion and following cell intrusion was then evaluated. The fibroblast cells adhered on the surface and intruded into the scaffold through the connecting pores after 24 h. The cell morphology became round shape from spreading with the decreasing PLLA (or PDLA) content in the copolymer. It is considered that the change in the cell morphology would be induced by the MPC unit as cytocompatible unit. These findings suggest that the porous scaffold makes it possible to have cytocompatibility and to produce three-dimensional tissue regeneration.     

Biodegradable films of partly branched poly(l-lactide)-co-poly(epsilon-caprolactone) copolymer: modulation of phase morphology, plasticization properties and thermal depolymerization

We report on the modulation of phase morphology, plasticization properties, and thermal stability of films of partly branched poly(l-lactide)-co-poly(epsilon-caprolactone) copolymer (PLLA-co-PCL) with additions of low molecular weight compounds, namely, triethyl citrate ester, diethyl phthalate, diepoxy polyether (poly(propylene glycol) diglycidyl ether), and with epoxidized soybean oil (ESO). The PLLA-co-PCL/polyether films showed significant stability against thermal depolymerization, high film flexibility, and good plasticizing properties, probably due to cross-linking and chain branching formation between diepoxy groups with both the end carboxyl and hydroxyl groups of the PLLA copolymer (initially present or generated during the degradation process) to produce primary ester and ether bonds, respectively. Diethyl phthalate and triethyl citrate ester were found to be efficient plasticizers for PLLA copolymer in terms of glass transition and mechanical properties, but the more water-soluble plasticizer triethyl citrate induced a dramatic loss in the molecular weight of the copolymer. Although ESO cannot play the role of a plasticizer, it substantially stabilizes and retards thermal depolymerization of the PLLA copolymer matrix, possibly because of a reaction between epoxy groups with the end carboxyl and hydroxyl groups of the PLLA copolymer. The presence of ESO in PLLA-co-PCL/ESO/triethyl citrate blends enhanced the compatibility and miscibility of the plasticizer with the PLLA copolymer matrix, considerably improved the mechanical properties (elongation at break), and substantially stabilized the copolymer against thermal depolymerization. It seems likely that the epoxy groups interact not only with the end hydroxyl and carboxyl group of the copolymer but as well with the hydroxyl group of triethyl citrate plasticizer to produce a new ether bond (C-O-C) as the cross-linking unit. On the other hand, for PLLA-co-PCL/ESO/polyether blends, (80/10/10) epoxidized oil distorts the compactness of the blend by diminishing the proposed entanglements between carboxyl, hydroxyl, and diepoxy groups of polyether and reduces the high elongation properties otherwise observed in the PLLA-co-PCL/polyether films. The multicomponent approach toward modulating poly(l-lactide)-co-poly(epsilon-caprolactone) copolymer films using epoxy compounds and plasticizers and the insight into the nature of various PLLA matrixes presented here offer advantages to a broad engineering of PLLA copolymer films having desirable physical properties and multiphase behavior for efficient uses in future technical applications.     

Effect of electrospun fiber diameter and alignment on macrophage activation and secretion of proinflammatory cytokines and chemokines

Macrophage activation can be modulated by biomaterial topography according to the biological scale (micrometric and nanometric range). In this study, we investigated the effect of fiber diameter and fiber alignment of electrospun poly(L-lactic) (PLLA) scaffolds on macrophage RAW 264.7 activation and secretion of proinflammatory cytokines and chemokines at 24 h and 7 days. Macrophages were cultured on four different types of fibrous PLLA scaffold (aligned microfibers, aligned nanofibers, random microfibers, and random nanofibers) and on PLLA film (used as a reference). Substrate topography was found to influence the immune response activated by macrophages, especially in the early inflammation stage. Secretion of proinflammatory molecules by macrophage cells was chiefly dependent on fiber diameter. In particular, nanofibrous PLLA scaffolds minimized the inflammatory response when compared with films and microfibrous scaffolds. The histological evaluation demonstrated a higher number of foreign body giant cells on the PLLA film than on the micro- and nanofibrous scaffolds. In summary, our results indicate that the diameter of electrospun PLLA fibers, rather than fiber alignment, plays a relevant role in influencing in vitro macrophage activation and secretion of proinflammatory molecules.     

In vivo study on the histocompatibility and degradation behavior of biodegradable poly(trimethylene carbonate-co-D,L-lactide)

The aim of this study was to explore the in vivo behavior and histocompatibility of poly(trimethylene carbonate-co-D,L-lactide) (PDLLA/TMC) and its feasibility of manufacturing cardiovascular stents. Copolymers with 50/50 molar ratio were synthesized by ring-opening polymerization with TMC and D, L-LA, or TMC and L-LA. Poly(L-lactide) (PLLA) was synthesized as a control. The films of the three polymers were implanted into 144 Wistar rats. At different time points of implantation, polymer films were explanted for the evaluation of degradation characteristics and histocompatibility using size exclusion chromatography , nuclear magnetic resonance , environmental scanning electron microscope , and optical microscope. Results showed that there were differences in the percentage of mass loss, molecular weight, shape and appearance changes, and inflammation cell counts between different polymers. With the time extended, the film's superficial structure transformed variously, which was rather obvious in the polymer of PDLLA/TMC. In addition, there were relatively lower inflammation cell counts in the PDLLA/TMC and poly(trimethylene carbonate-co-L-lactide) (PLLA/TMC) groups at different time points in comparison with those in the PLLA group. The differences were of statistical significance (P< 0.05) in the group of PDLLA/TMC vs. PLLA, and the group of PLLA/TMC vs. PLLA, but not within the PDLLA/TMC and PLLA/TMC groups (P> 0.05). These results suggested that the polymer of PDLLA/TMC (50/50) with favorable degradation performance and histocompatibility is fully biodegradable and suitable for manufacturing implanted cardiovascular stents.     

Porous poly (L-lactic acid) scaffolds are optimal substrates for internal colonization by A6 mesoangioblasts and immunocytochemical analyses

In this study, mouse mesoangioblasts were seeded onto bidimensional matrices within three-dimensional porous scaffolds of poly (L-lactic acid) (PLLA), in the presence or absence of a type I collagen coating. The cells were observed under a scanning electron microscope and tested for their adhesion, survival and proliferation. Immunolocalization of heat shock protein (Hsp) 70, an abundant and ubiquitous intracellular protein in these cells, was also performed in sectioned cell-containing scaffolds under a confocal fluorescence microscope to determine if in situ analysis of intracellular constituents was feasible. The data show that PLLA films allow direct cell adhesion and represent an optimal support for cell growth, and that the internal surfaces of PLLA polymeric sponges can be colonized by mesoangioblasts, which can be submitted for in situ confocal microscopic analyses for possible monitoring of time-dependent expression of differentiation markers.     

Effects of nanotopography on stem cell phenotypes

Stem cells are unspecialized cells that can self renew indefinitely and differentiate into several somatic cells given the correct environmental cues. In the stem cell niche, stem cell-extracellular matrix (ECM) interactions are crucial for different cellular functions, such as adhesion, proliferation, and differentiation. Recently, in addition to chemical surface modifications, the importance of nanometric scale surface topography and roughness of biomaterials has increasingly becoming recognized as a crucial factor for cell survival and host tissue acceptance in synthetic ECMs. This review describes the influence of nanotopography on stem cell phenotypes.     

Dynamic adsorption behavior of poly(3-hydroxybutyrate) depolymerase onto polyester surface investigated by QCM and AFM

Time-dependent adsorption behavior of poly(3-hydroxybutyrate) (PHB) depolymerase from Ralstonia pickettiiT1 on a polyester surface was studied by complementary techniques of quarts crystal microbalance (QCM) and atomic force microscopy (AFM). Amorphous poly(l-lactide) (PLLA) thin films were used as adsorption substrates. Effects of enzyme concentration on adsorption onto the PLLA surface were determined time-dependently by QCM. Adsorption of PHB depolymerase took place immediately after replacement of the buffer solutions with the enzyme solutions in the cell, followed by a gradual increase in the amount over 30 min. The amount of PHB depolymerase molecules adsorbed on the surface of amorphous PLLA thin films increased with an increase in the enzyme concentration. Time-dependent AFM observation of enzyme molecules was performed during the adsorption of PHB depolymerase. The phase response of the AFM signal revealed that the nature of the PLLA surface around the PHB depolymerase molecule was changed due to the adsorption function of the enzyme and that PHB depolymerase adsorbed onto the PLLA surface as a monolayer at a lower enzyme concentration. The number of PHB depolymerase molecules on the PLLA surface depended on the enzyme concentration and adsorption time. In addition, the height of the adsorbed enzyme was found to increase with time when the PLLA surface was crowded with the enzymes. In the case of higher enzyme concentrations, multilayered PHB depolymerases were observed on the PLLA thin film. These QCM and AFM results indicate that two-step adsorption of PHB depolymerase occurs on the amorphous PLLA thin film. First, adsorption of PHB depolymerase molecules takes place through the characteristic interaction between the binding domain of PHB depolymerase and the free surface of an amorphous PLLA thin film. As the adsorption proceeded, the surface region of the thin film was almost covered with the enzyme, which was accompanied by morphological changes. Second, the hydrophobic interactions among the enzymes in the adlayer and the solution become more dominant to stack as a second layer.     

Functionalized titanium oxide surfaces with phosphated carboxymethyl cellulose: characterization and bonelike cell behavior

The performance of dental or orthopedic implants is closely dependent on surface properties in terms of topography and chemistry. A phosphated carboxymethylcellulose containing one phosphate group for each disaccharide unit was synthesized and used to functionalize titanium oxide surfaces with the aim to improve osseointegration with the host tissue. The modified surfaces were chemically characterized by means of X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The investigation of the surface topography was performed by atomic force microscopy measurements before and after the polysaccharide coating. In vitro biological tests using osteoblastlike cells demonstrated that functionalized TiO(2) surfaces modulated cell response, in terms of adhesion, proliferation,and morphology. Phosphated carboxymethylcellulose promoted better cell adhesion and significantly enhanced their proliferation. The morphology of cells was polygonal and more spread on this type of modified surface.These findings suggest that the presence of a phosphate polysaccharide coating promotes osteoblast growth on the surface potentially improving biomaterial osseointegration.