Characterization and construction of molecular cloning vehicles within Staphylococcus aureus.

Four chloramphenicol resistance (Cm) and four tetracycline resistance (Tc) plasmids from Staphylococcus aureus were characterized by restriction endonuclease mapping. All four Tc plasmids had molecular masses of 2.9 megadaltons (Mdaltons) and indistinguishable responses to seven different restriction endonucleases. The four Cm plasmids (pCW6, pCW7, pCW8, and pC221) had molecular masses of 2.6, 2.8, 1.9, and 2.9 Mdaltons, respectively. The four Cm plasmids also differed both in the level of resistance to Cm and in susceptibility to retriction endonucleases. Single restriction endonuclease sites contained within each plasmid included the following: in pCW6 for HindIII, XbaI, HpaII, and BstEII; in pCW7 for HindIII, BstEII, BglII, HaeIII, and HpaII; in pCW8 for HindIII, HaeIII, and HpaII; in pC221 for HindIII, BstEII, and EcoRI. The molecular cloning capabilities of pCW8 and pC221 were determined. Cm and erythromycin resistance (Em) recombinant plasmids pCW12, PCW13, and pCW14 were constructed and used to transform S. aureus 8325-4. A 2.8-Mdalton HindIII fragment from plasmid pI258 was found to encode Em resistance and contain single sites for the retriction endonucleases BglII, PstI, HaeIII, and HpaII. The largest EcoRI fragment (8 Mdaltons) from pI258 contained the HindIII fragment encoding Em resistance intact. Cloning of DNA into the BglII site of pCW14 did not alter Em resistance. Cloning of DNA into the HindIII site of pCW8 and the HindIII and EcoRI sites of pC221 did not disrupt either plasmid replication of Cm resistance.     

Restriction map of a capsule plasmid of Bacillus anthracis

The capsule plasmid pTE702 of Bacillus anthracis has been physically mapped with the restriction endonucleases HindIII, PstI, BamHI, SalI, and XhoI. A HindIII fragment map of pTE702 (96.5 kb) was obtained by analysis of the recombinant plasmids and cosmids containing overlapping fragments partially digested with HindIII. The physical map for PstI, BamHI, SalI, and XhoI was obtained by double digestion mapping of these sites in relation to the HindIII sites. The replication region of pTE702 was determined by in vitro genetic replicon labeling in B. subtilis.     

Physical and genetic organization of the plasmid R15

The conjugative IncN plasmid R15 (SmrSurHgr, 62.3 kb) is cleaved by the hexanucleotide-specific endonucleases BglII, HindIII, EcoRI, BamHI, SmaI, SalI, PstI and XhoI into 9, 9, 6, 5, 4, 4, 4 and 2 fragments, respectively. The restriction sites were located on the physical map of the R15 genome. Distribution of the cleavage sites is strongly asymmetric. 28 of 32 sites for BamHI, EcoRI, HindIII, SalI, SmaI and PstI were located close to or within the sequences of transposable elements Tn2353 and Tn2354. According to the results of analysis of R15::Tn1756 deletion derivatives and recombinant plasmids harboring fragments of R15, the genetic determinants for resistance to Sm, Su and Hg were mapped, as well as the regions necessary for EcoRII restriction--modification and for plasmid replication and conjugation. The features of physical and genetic structures of R15 and other IncN plasmids are discussed.     

Plasmid pBS195 with a wide range of hosts, isolated from lactobacilli

The nonconjugative 4.4 kb plasmid pBS195 has been found in Lactobacillus sp. 195 strain resistant to kanamycin and streptomycin. The plasmid pBS195 determining the resistance to kanamycin has a broad host range. It is inherited by the Gram-positive microorganisms (Bacillus subtilis) as well as by Escherichia coli cells, has the cleavage sites for the restriction endonucleases BamHI, EcoRI, HindIII, PstI, KpnI. The restriction map of the plasmid for these enzymes is constructed. The broad host range, efficiently expressed marker, the presence of the unique restriction sites, small size make the plasmid pBS195 promising for the genetic engineering research.     

Physical and genetic analyses of the Inc-I alpha plasmid R64

A 126-kilobase (kb) physical and genetic map of the Inc-I alpha plasmid R64 was constructed by using the restriction enzymes, BamHI, SalI, XhoI, HindIII, and EcoRI. The replication (Rep) and incompatability (Inc) functions of this plasmid were located in a 1.75-kb segment of an EcoRI fragment, E10 (3.3 kb). In addition, the genes determining growth inhibition of phage BF23 (Ibf), suppression of dnaG ( Sog ), resistance to tetracycline (Tetr), and resistance to streptomycin ( Strr ) were located on the 5.5-kb HindIII-XhoI fragment, the 8.1-kb EcoRI fragment (E5), the 4.6-kb HindIII fragment (H8), and the 4.1-kb HindIII fragment (H10), respectively. The map of R64 was compared with that of ColIb, which belongs to the Inc-I alpha group.     

Plasmid vector for cloning, determination of nucleotide sequence and directed assembly of DNA fragments

A plasmid vector pNIMB has been constructed (starting) from the pUR222 plasmid as a result of substitution of the polylinker containing restriction sites: PstI, SalGI, AccI, HindII, BamHI EcoRI and by other synthetic linkers with additional sites for HindIII and HgaI. Plasmid pNIMB does not differ from the parent one phenotypically. Compared to pUR222 the vector contains an additional site for cloning HindIII fragments of DNA and allows to clone SalGI/BamHI- and PstI/SalGI-fragments. Cloning of DNA fragments in all seven unique sites of pNiMB gives the possibility for sequencing the fragments avoiding their isolation from the gel. Moreover, this vector may be useful for cloning and directed assembly of chemically synthesised DNA fragments when the endonuclease HgaI sites are used.     

Restriction enzyme cleavage map of Tn10, a transposon which encodes tetracycline resistance.

A cleavage map of a recombinant plasmid carrying Tn10 was constructed for 13 different restriction enzymes. The Tn10 region of this plasmid contains cleavage sites for BamHI, AvaI, BglI, BglII, EcoRI, XbaI, HincII, HindIII, and HpaI. Restriction enzymes PstI, SmaI, KpnI, XhoI, SalI, and PvuI do not cleave within the Tn10 element. This map confirms the previously reported structure of this transposon; it is composed of a unique sequence (approximately6,400 base pairs long), which in part codes for the tetracycline resistance functions and is bounded by inverted repeats (approximately 1,450 base pairs long).     

Restriction map of the 125-kilobase plasmid of Bacillus thuringiensis subsp. israelensis carrying the genes that encode delta-endotoxins active against mosquito larvae.

A large plasmid containing all delta-endotoxin genes was isolated from Bacillus thuringiensis subsp. israelensis; restricted by BamHI, EcoRI, HindIII, KpnI, PstI, SacI, and SalI; and cloned as appropriate libraries in Escherichia coli. The libraries were screened for inserts containing recognition sites for BamHI, SacI, and SalI. Each was labeled with 32P and hybridized to Southern blots of gels with fragments generated by cleaving the plasmid with several restriction endonucleases, to align at least two fragments of the relevant enzymes. All nine BamHI fragments and all eight SacI fragments were mapped in two overlapping linkage groups (with total sizes of about 76 and 56 kb, respectively). The homology observed between some fragments is apparently a consequence of the presence of transposons and repeated insertion sequences. Four delta-endotoxin genes (cryIVB-D and cytA) and two genes for regulatory polypeptides (of 19 and 20 kDa) were localized on a 21-kb stretch of the plasmid; without cytA, they are placed on a single BamHI fragment. This convergence enables subcloning of delta-endotoxin genes (excluding cryIVA, localized on the other linkage group) as an intact natural fragment.     

DNA polymorphism in the Russian population. Analysis of dna restriction fragment length polymorphism in seven loci of the nuclear genome]

Using the method for polymerase chain reaction the polymorphism of eight markers of the nuclear DNA was studied. In a sample of Russians taken at random (N = 118) from predominantly southern and central regions of Russia, allele frequencies were determined for restriction sites HindIII at HBG-2 and PAH loci, AvaII at the HBB locus, MspI at the ApoB locus, PstI at D7S8, HincII at LDLR, TaqI and BamHI at the DSX164. Comparative data for different world regions are presented.     

Identification and characterization of a plasmid in strain Aeronomas hydrophila IBRB-36 4CPA carrying genes for catabolism of chlorophenoxyacetic acids

Results of studying plasmid pAH36 in strain Aeronomas hydrophila IBRB-36 4CPA are presented. Plasmid pAH36 possesses BamHI, PstI, and HindIII restriction sites and is 5.4 kb in size. The plasmid was shown to contain genes for catabolism of chlor-substituted phenoxyacetic acids.     

Construction and characterization of new cloning vehicles. III. Derivatives of plasmid pBR322 carrying unique Eco RI sites for selection of Eco RI generated recombinant DNA molecules.

In vitro recombinant DNA techniques were used to construct two new cloning vehicles, pBR324 and pBR235. These vectors, derived from plasmid pBR322, are relaxed replicating elements. Plasmid pBR324 carries the genes from pBR322 coding for resistance to the antibiotics ampicillin (Apr) and tetracycline (Tcr) and the colicin E1 structural and immunity genes derived from plasmid pMBI. Plasmid pBR325 carries the Apr and Tcr genes from pBR322 and the cloramphenicol resistance gene (Cmr) from phage P1Cm. In these plasmids the unique EcoRI restriction site present in the DNA molecule is located either in the colicin E1 structural gene (pBR324) or in the Cmr gene (pBR325). These vectors were constructed in order to have a single EcoRI site located in the middle of a structural gene which when inactivated would allow, for the easy selection of plasmid recombinant DNA molecules. These plasmids permit the molecular cloning and easy selection of EcoRI, BamHI, HindIII, PstI, HincII, SalI, (XamI), Smal, (XmaI), BglII and DpnII restriction generated DNA molecules.     

Versatile kanamycin-resistance cartridges for vector construction in Escherichia coli

To generate polylinker sequences which can be transferred together with an adjacent selectable marker, two plasmids (pWW-84 and pWW-97) were constructed which contain a kanamycin-resistance gene (KmR) flanked by various restriction sites. From these plasmids KmR-cartridges can be obtained as EcoRI, BamHI, SalI, AccI or HincII fragments for insertion into the appropriate restriction site of any plasmid. The following restriction sites can be introduced with these cartridges: BamHI, SalI (AccI, HincII), EcoRI, SacI, SphI and KpnI (Asp718) all adjacent to KmR, XhoI and HindIII, both within KmR. If desired, KmR can be removed by PstI digestion and religation, creating a single PstI site and leaving all adjacent sites intact.     

Construction and characterization of new cloning vehicles. IV. Deletion derivatives of pBR322 and pBR325

In vitro recombinant DNA experiments involving restriction endonuclease fragments derived from the plasmids pBR322 and pBR325 resulted in the construction of two new cloning vehicles. One of these plasmids, designated pBR327, was obtained after an EcoRII partial digestion of pBR322. The plasmid pBR327 confers resistance to tetracycline and ampicillin, contains 3273 base pairs (bp) and therefore is 1089 bp smaller than pBR322. The other newly constructed vector, which has been designated pBR328, confers resistance to chloramphenicol as well as the two former antibiotics. This plasmid contains unique HindIII, BamHI and SalI sites in the tetracycline resistance gene, unique PvuI and PstI sites in the ampicillin resistance gene and unique EcoRI, PvuII and BalI sites in the chloramphenicol resistance gene. The pBR328 plasmid contains approx. 4900 bp.     

Cloning and endonuclease restriction analysis of argF and of the control region of the argECBH bipolar operon in Escherichia coli.

A 1.8 kb DNA fragment, liberated by endonuclease HindIII, contains the control region of the argECBH bipolar operon near one end and the weak secondary promoter of argH at the other extremity; it has been cloned in plasmid pBR322. The same plasmid vector has been used to clone the argF gene liberated from the chromosome by endonuclease BamHI. Restriction patterns for the two hybrid plasmids have been determined, using enzymes AluI, BglI, EcoRI, HaeIII, HincII, HindIII, HpaI and II, PstI and SalI. Two AluI sites situated on either side of and close to a HincII target delineate two short fragments covering the whole of the argECBH control region. The argF control elements are located in a region accessible to further dissection by BamHI, EcoRI, PstI and HindIII. Carriers of the argF plasmid produce extremely high amounts of ornithine carbamoyltransferase, a feature useful for purification of this enzyme.     

Improved vector, pHSG664, for direct streptomycin-resistance selection: cDNA cloning with G:C-tailing procedure and subcloning of double-digest DNA fragments

A plasmid cloning vector, pHSG664, has been constructed which is suitable for the direct-selection of transformed cells with recombinant DNAs. The plasmid contains the replicon and ApR-gene region of pUC9 ligated to the strA+ (rpsL+) gene derived from pNO1523 [Dean, Gene 15 (1981) 99-102]. The vector contains ten unique restriction sites: EcoRI, HpaI, PvuII, SphI, PstI, SmaI(XmaI), BamHI, SalI(AccI, HincII), XbaI and HindIII. Five sites (bold-face lettering) are located within the coding region of the strA+ gene. Any insertion at the five bold-faced sites or any nucleotide replacement involving the strA+ gene region and the other unique sites can be selected by Ap and Sm double selection in a strA- (SmR) strain such as E. coli HB101. Thus, this vector is useful for cDNA cloning at either the SphI or the PstI site with the G:C-tailing procedure, as well as for the cloning of double-digest DNA segments.     

Isolation and characteristics of a recombinant pOV13 plasmid as a vector for DNA cloning in a broad range of bacterial hosts

The hybrid plasmid pOV13 proposed as a potential vector for DNA cloning in a broad bacterial host range has been constructed on the basis of the broad host range plasmid RSF1010 and a shortened derivative of RP4, the plasmid pVZ115 serving a marker DNA fragment. The plasmid pOV13 contains the genes for streptomycin, kanamycin and tetracycline resistance and single cleavage sites for restriction endonucleases BamHI, BgIII, SalI, SmaI, PvuII, XhoI, as well as double cleavage sites for restriction endonucleases PstI and HindIII permitting one to clone DNA with insertional inactivation of genes. The physicogenetical map of the birepliconed plasmid pOV13 is presented.     

A pSC101-derived plasmid which shows no sequence homology to other commonly used cloning vectors

We have constructed a plasmid cloning vector, pGB2, which is derived from the Escherichia coli plasmid pSC101. The plasmid, which specifies resistance to spectinomycin and streptomycin, contains unique restriction sites for the enzymes HindIII, PstI, SalI, BamHI, SmaI and EcoRI. pGB2 shows no sequence homology, as detected by DNA-DNA hybridization, to several widely used vectors such as pBR322, pUC8 and phage lambda L47.1. Amongst other applications, DNA fragments can be cloned into the plasmid and then radioactive plasmid DNA can be used as a probe to screen recombinant DNA libraries.