Evaluation of ethanol production and bioadsorption of heavy metals by various red seaweeds

The objective of this study was to evaluate ethanol production and bioadsorption with four red seaweeds, Gelidium amansii, Gracilaria verrucosa, Kappaphycus alvarezii and Eucheuma denticulatum. To produce ethanol, thermal acid hydrolysis, enzymatic saccharification and fermentation was carried out. After pretreatment, 38.5, 39.9, 31.0 and 27.5 g/L of monosaccharides were obtained from G. amansii, G. verrucosa, K. alvarezii and E. denticulatum, respectively. Ethanol fermentation was performed with Saccharomyces cerevisiae KCCM 1129 adapted to 80 g/L galactose. The ethanol productions by G. amansii, G. verrucosa, K. alvarezii and E. denticulatum were 18.8 g/L with Y _EtOH = 0.49, 19.1 g/L with Y _EtOH = 0.48, 14.5 g/L with Y _EtOH = 0.47 and 13.0 g/L with Y _EtOH = 0.47, respectively. The waste seaweed slurries after the ethanol fermentation were reused to adsorb Cd(II), Pb(II) and Cu(II). Using langmuir isotherm model, Cu(II) had the highest affinity for waste seaweeds with the highest q _max and electronegativity values among three heavy metals.     

A review of the history of research and control of <Emphasis Type="Italic">Rhipicephalus</Emphasis> (<Emphasis Type="Italic">Boophilus</Emphasis>) <Emphasis Type="Italic">microplus</Emphasis>, babesiosis and anaplasmosis in Uruguay

The effect of five constant temperatures (16, 20, 24, 28 and 32 °C) on the development, survival and reproduction of Tetranychus cinnabarinus (Boisduval) [=?Tetranychus urticae Koch (red form)] fed on cassava leaves was examined in the laboratory at 85% relative humidity. Development time of various immature stages decreased with increasing temperature, with total egg-to-adult development time varying from 27.7 to 6.7 days. The lower thermal threshold for development was 10.8 °C and the thermal constant from egg to adult was 142.4 degree-days. Pre- and post-oviposition period and female longevity all decreased as temperature increased. The longest oviposition period was observed at 20 °C with 20.4 days. Under different temperatures, mated females laid, on average, 1.0, 2.9, 4.7, 4.7 and 4.9 eggs per day, respectively. The maximum fecundity (81.5 eggs per female) was at 28 °C and the intrinsic rate of increase (r _m ) was highest (0.25) at 32 °C. The results of this study indicate that T. cinnabarinus population could increase rapidly when cassava leaves serve as a food source. At the appropriate temperature T. cinnabarinus could seriously threaten growth of cassava.     

Biology and Thermal Requirements of <Emphasis Type="Italic">Fopius arisanus</Emphasis> (Sonan, 1932) (Hymenoptera: Braconidae) Reared on <Emphasis Type="Italic">Ceratitis capitata</Emphasis> Eggs (Wiedemann) (Diptera: Tephritidae)

Fopius arisanus (Sonan) is a solitary parasitoid of eggs and the first instar larvae of Tephritidae. Due to the occurrence of Ceratitis capitata (Wiedemann) in various regions and under several climatic conditions, this study aimed to evaluate the effect of different temperatures on the embryonic development (egg–adult) and determine thermal requirements and the number of annual generations F. arisanus on eggs of C. capitata. In the laboratory, eggs of C. capitata (24 h) were submitted to parasitism of F. arisanus during 6 h. Later, the eggs were placed in plastic containers (50 mL) (50 eggs/container) on a layer of artificial diet and packed in chambers at temperatures 15, 18, 20, 22, 25, 28, 30, and 32 ± 1°C, RH 70 ± 10%, and a photophase of 12 h. The largest number of offspring, emergence rate, and weight of adults of F. arisanus were observed at 25°C. The highest sex ratios (sr > 0.75) were recorded at 15 and 18°C, being statistically higher than the temperatures 20°C (0.65), 22°C (0.64), 25°C (0.65), 28°C (0.49), and 30°C (0.47). At 32°C, there was no embryonic development of F. arisanus. The egg–adult period was inversely proportional to temperature. Based on the development of the biological cycle (egg–adult), the temperature threshold (T _t) was 10.3°C and thermal constant (K) of 488.34 degree-days, being the number of generations/year directly proportional to the temperature increase. The data show the ability of F. arisanus to adapt to different thermal conditions, which is important for biological control programs of C. capitata.     

Physicochemical properties of multicomponent poly(hydroxyalkanoates)

The properties of new five-component poly(hydroxyalkanoates) (PHA) formed by short-and medium-chain monomers synthesized by the bacterium Wautersia eutropha B5786 were studied by X-ray diffraction, IR spectroscopy, differential thermal analysis, and viscometry. The degree of crystallinity of PHA decreased from 72 to 57% as the molar fraction of hydroxyhexanoate increased from 2.5 to 18.0 mol%. The melting temperature (T _m) and decomposition temperature (T _d) of the multicomponent PHA are lower than those for poly(hydroxybutyrate), whose T _m and T _d are 168–170 and 260–265°C, respectively. Both parameters of the multicomponent PHA decrease to 156 and 252°C, respectively, as the hydroxyhexanoate mole fraction is raised. The effect of hydroxyhexanoate on the physicochemical properties of the PHA is similar to that of hydroxyvalerate observed previously.     

Expression and characterization of glutamate decarboxylase from <Emphasis Type="Italic">Lactobacillus brevis</Emphasis> HYE1 isolated from <Emphasis Type="Italic">kimchi</Emphasis>

A putative gene (gadlbhye1) encoding glutamate decarboxylase (GAD) was cloned from Lactobacillus brevis HYE1 isolated from kimchi, a traditional Korean fermented vegetable. The amino acid sequences of GADLbHYE1 showed 48% homology with the GadA family and 99% identity with the GadB family from L. brevis. The cloned GADLbHYE1 was functionally expressed in Escherichia coli using inducible expression vectors. The expressed recombinant GADLbHYE1 was successfully purified by Ni–NTA affinity chromatography, and had a molecular mass of 54 kDa with optimal hydrolysis activity at 55 °C and pH 4.0. Its thermal stability was determined to be higher than that of other GADs from L. brevis, based on its melting temperature (75.18 °C). Kinetic parameters including K_m and V_max values for GADLbHYE1 were 4.99 mmol/L and 0.224 mmol/L/min, respectively. In addition, the production of gamma-aminobutyric acid in E. coli BL21 harboring gadlbhye1/pET28a was increased by adding pyridoxine as a cheaper coenzyme.     

Fertility Life Table of <Emphasis Type="Italic">Tetranychus palmarum</Emphasis> Flechtmann &amp; Noronha (Acari: Tetranychidae) in Oil Palm

Some species of spider mites belonging to the Tetranychidae family are known to associate with oil palm (Elaeis guineensis Jacq. – Arecaceae). The occurrence of Tetranychus palmarum Flechtmann & Noronha (Acari, Tetranychidae) was verified on oil palm seedlings under greenhouse conditions in the State of Pará in Northern Brazil. Plants with colonies of T. palmarum presented yellowish spots on leaflets and leaves with chlorosis. The objective of this study was to access the biology and fertility life table of T. palmarum in E. guineensis leaves. The experiment was conducted under four constant temperatures, 22, 25, 28, and 31°C, at 70 ± 10% RH under a 12:12 LD photoperiod. The duration of the egg-to-adult period was 18.4 and 9.8 days, at 22 and 31°C, respectively. The parameters of the fertility life table showed that 28°C is most suitable for the development and reproduction of T. palmarum, with higher values for reproductive parameters (R _o , r _m , and λ) and lower values for duplicating the population (TD). Therefore, it is apparent that the best temperature conditions for the development of T. palmarum are found in the warmer regions of Brazil, such as those observed in northern Brazil.     

High level extracellular production of a truncated alkaline β-mannanase from alkaliphilic <Emphasis Type="Italic">Bacillus</Emphasis> sp. N16-5 in <Emphasis Type="Italic">Escherichia coli</Emphasis> by the optimization of induction condition and fed-batch fermentation

To improve the extracellular production of alkaline β-mannanase from alkaliphilic Bacillus sp. N16-5 in Escherichia coli, two truncated recombinant mannanases (32a-ManAR2 and 22b-ManAR2) were obtained. Compared with the full-length mannanases (32a-ManAR1 and 22b-ManAR1), the truncated mannanases not only showed higher secretion rate, but also exhibited higher thermostability and alkalistability. The K _m value (11 mg/mL) of 32a-ManAR2 was higher than that (1.46 mg/mL) of 32a-ManAR1. The specific activity of 22b-ManAR2 was 2.7 times higher than that of 22b-ManAR1. 22b-ManAR2 showed the highest k _cat/K _m value of 602.7 ml/mg s. The parameters of induction for recombinant mannanase production of E. coli BL21 (pET32a-manAR2) and E. coli BL21 (pET22b-manAR2) were subsequently optimized. The yield of soluble mannanase was found to be enhanced with lower induction temperature (25 °C), lower IPTG concentration (0.01–0.05 mM), and Triton X-100 supplement (0.1 %) in a shake flask. Moreover, a one-time feeding strategy and Triton X-100 supplement were applied in production of 22b-ManAR2 in a 10 L fermentor. The productivity of the total soluble mannanase reached 9284.64 U/mL with the extracellular rate of 74 % at 46 h of fermentation, which was the highest productive level of alkaline β-mannanase in recombinant E. coli to date.     

Preparation and Optimization of Fast-Disintegrating Tablet Containing Naratriptan Hydrochloride Using D-Optimal Mixture Design

Optimization of a lyophilized fast-disintegrating tablet (LFDT) formulation containing naratriptan hydrochloride, an antimigraine drug, was the foremost objective of the study, aiming in achieving fast headache pain relief. The Design-Expert® v10 software was used to generate formulations using D-optimal mixture design with four components: gelatin (X₁), hydrolyzed gelatin (X₂), glycine (X₃), and mannitol (X₄) of total solid material (TSM) w/w. The effect of the relative proportion of each component was determined on friability (Y₁), hardness (Y₂), and in vitro disintegration time (Y₃), which was then applied for formulation optimization. In addition, their effect on tablet porosity was determined via scanning electron microscopy (SEM). Drug-excipient interaction was evaluated using differential scanning calorimetry (DSC). A comparative dissolution study against the conventional tablets was studied. Accelerated stability study was carried out in (Al/Al) and (Al/PVC) blister packs. An in vivo pharmacokinetic study was carried out to compare the optimized formulation and the conventional tablets. The optimized formulation’s responses were 0.30%, 3.4 kg, and 6.12 s for Y₁, Y₂, and Y₃, respectively. No drug-excipient interaction was specified via DSC. The optimized formulation exhibited porous structure as determined via SEM. Dissolution study demonstrated complete dissolution within 1.5 min. Study indicated stability for 78 months in (Al/Al) blister packs. In vivo pharmacokinetic study demonstrated that C_max, AUC_last, and AUC_inf were significantly higher for the developed formulation. As well, the T_max was 1 h earlier than that of convenient tablet. An LFDT would achieve a faster onset of action for naratriptan compared to other formulations.     

High-yield expression,purification, characterization,and structure determination of tag-free <Emphasis Type="Italic">Candida utilis</Emphasis> uricase

We report the successful high-yield expression of Candida utilis uricase in Escherichia coli and the establishment of an efficient three-step protein purification protocol. The purity of the recombinant protein, which was confirmed to be C. utilis uricase by sodium dodecyl sulfate–polyacrylamide gel electrophoresis and matrix-assisted laser desorption/ionization time-of-flight mass spectrometer analysis, was >98% and the specific activity was 38.4 IU/mg. Crystals of C. utilis uricase were grown at 18°C using 25% polyethylene glycol 3350 as precipitant. Diffraction by the crystals extends to 1.93 Å resolution, and the crystals belong to the space group P2₁2₁2₁ with unit cell parameters a?=?69.16 Å, b?=?139.31 Å, c?=?256.33 Å, and α?=?β?=?γ?=?90°. The crystal structure of C. utilis uricase shares a high similarity with other reported structures of the homologous uricases from other species in protein database, demonstrating that the three-dimensional structure of the protein defines critically to the catalytic activities.     

Hydrothermal time analysis of watermelon (<Emphasis Type="Italic">Citrullus vulgaris</Emphasis> cv. ‘Crimson sweet’) seed germination

This study evaluated the ability of a hydrothermal time model (HTT) to describe the kinetics of watermelon (Citrullus vulgaris cv. ‘Crimson sweet’) seed germination under different temperatures (T) and water potentials (ψ) and also to determine the cardinal temperatures of watermelon. Results indicated that ψ influenced germination rate and germination percentage. For this seed lot, cardinal temperatures were 10 °C for T _b, 28.34 °C for T _o and 40.8 °C for T _c in the control (0 MPa) treatment. There was a decrease in hydrotime constant (θ _H) when T was increased to T _o and then remained constant at supra-optimal temperatures (30 MPah^?1). Also, at temperatures above T _o, ψ _b(50) values increased linearly with T. The k _T value (the slope of the relationship between ψ _b(50) and T exceeds T _o) of this seed lot was calculated as 0.076 MPa°Ch^?1. Results this study show that when the HTT model is applied, it can accurately describe ψ _b(g) and the course of germination around Ts (R ² = 0.82). Moreover, the ψ _b(50) was estimated to be ?0.96 MPa based on this model. Consequently, the germination response of watermelon for all Ts and ψs can be adequately described by the HTT model and enabling it to be used as a predictive tool in watermelon seed germination simulation models.     

Characterization of a novel cold-active esterase isolated from swamp sediment metagenome

A functional screen of a metagenomic library from “Upo” swamp sediment in Korea identified a gene EstL28, the product of which displayed lipolytic properties on a tributyrin-supplemented medium. The EstL28 sequence encodes a 290 amino acid protein (designated as EstL28), with a predicted molecular weight of 31.3 kDa. The encoded EstL28 protein exhibited the highest sequence similarity (45 %) to a hydrolase found in Streptococcus sanguinis. Phylogenetic analysis indicated that EstL28 belongs to a currently uncharacterized family of esterases. Within the conserved α/β-hydrolase 6 domain, the EstL28 retains the catalytic triad Ser₁₀₃–Asp₂₄₈–His₂₆₈ that is typical of esterases. The Ser₁₀₃ residue in the catalytic triad is located in the consensus pentapeptide motif GXSXG. The purified EstL28 enzyme worked optimally at 35 °C and pH 8.5 and remained stable at temperatures lower than 20 °C. The catalytic activity of EstL28 was maximal with p-nitrophenyl butyrate, indicating that it was an esterase. This enzyme also exhibited stable activity in the presence of methanol, ethanol, isopropanol, and dimethyl sulfoxide. Therefore, the level of stability in organic solvents and cold temperature suggests that EstL28 has potential for many biotechnological applications.     

Prebiotic effects of bovine lactoferrin on specific probiotic bacteria

Bovine lactoferrin (bLf) is a natural iron-binding protein and it has been suggested to be a prebiotic agent, but this finding remains inconclusive. This study explores the prebiotic potential of bLf in 14 probiotics. Initially, bLf (1–32 mg/mL) treatment showed occasional and slight prebiotic activity in several probiotics only during the late experimental period (48, 78 h) at 37 °C. We subsequently supposed that bLf exerts stronger prebiotic effects when probiotic growth has been temperately retarded. Therefore, we incubated the probiotics at different temperatures, namely 37 °C, 28 °C, room temperature (approximately 22–24 °C), and 22 °C, to retard or inhibit their growth. As expected, bLf showed more favorable prebiotic activity in several probiotics when their growth was partially retarded at room temperature. Furthermore, at 22 °C, the growth of Bifidobacterium breve, Lactobacillus coryniformis, L. delbrueckii, L. acidophilus, B. angulatum, B. catenulatum, and L. paraplantarum were completely blocked. Notably, these probiotics started regrowing in the presence of bLf (1–32 mg/mL) in a significant and dose-dependent manner. Accordingly, bLf significantly increased the growth of Pediococcus pentosaceus, L. rhamnosus, and L. paracasei (BCRC 17483; a locally isolated strain) when their growth was retarded by incubation at 22 °C. In conclusion, bLf showed inconsistent prebiotic activity in the 14 probiotics at 37 °C, but revealed strong prebiotic activity in 10 probiotic strains at 22 °C. Therefore, this study enables determining additional roles of Lf in probiotic strains, which can facilitate developing novel combinational approaches by simultaneously using Lf and specific probiotics.     

Efficient hydroxylation of 1,8-cineole with monoterpenoid-resistant recombinant <Emphasis Type="Italic">Pseudomonas putida</Emphasis> GS1

In this work, monoterpenoid hydroxylation with Pseudomonas putida GS1 and KT2440 were investigated as host strains, and the cytochrome P450 monooxygenase CYP176A1 (P450_cin) and its native redox partner cindoxin (CinC) from Citrobacter braakii were introduced in P. putida to catalyze the stereoselective hydroxylation of 1,8-cineole to (1R)-6β-hydroxy-1,8-cineole. Growth experiments in the presence of 1,8-cineole confirmed pseudomonads’ superior resilience compared to E. coli. Whole-cell P. putida harboring P450_cin with and without CinC were capable of hydroxylating 1,8-cineole, whereas coexpression of CinC has been shown to accelerate this bioconversion. Under the same conditions, P. putida GS1 produced more than twice the amount of heterologous P450_cin and bioconversion product than P. putida KT2440. A concentration of 1.1 ± 0.1 g/L (1R)-6β-hydroxy-1,8-cineole was obtained within 55 h in shake flasks and 13.3 ± 1.9 g/L in 89 h in a bioreactor, the latter of which corresponds to a yield Y_P/S of 79 %. To the authors’ knowledge, this is the highest product titer for a P450 based whole-cell monoterpene oxyfunctionalization reported so far. These results show that solvent-tolerant P. putida GS1 can be used as a highly efficient recombinant whole-cell biocatalyst for a P450 monooxygenase-based valorization of monoterpenoids.     

Biological Data on <Emphasis Type="Italic">Anovia punica</Emphasis> Gordon (Coleoptera: Coccinellidae), a Predator of <Emphasis Type="Italic">Crypticerya multicicatrices</Emphasis> Kondo &amp; Unruh (Hemiptera: Monophlebidae)

The coccinellid beetle Anovia punica Gordon (Coleoptera: Coccinellidae: Noviini) is an important predator of the Colombian fluted scale, Crypticerya multicicatrices Kondo & Unruh (Hemiptera: Monophlebidae). In order to gather information on the biological traits of A. punica, we conducted a series of studies, including of the developmental time of each life history stage, estimation of life table parameters, and predation rates under laboratory conditions [25.1 ± 1.6°C, with 70.5 ± 7.3% RH, and natural light regime, approx. 12:12 (L:D) h]. Developmental stages of A. punica were categorized as follows: egg stage, four larval instars, prepupal instar, pupal instar, and adult. Developmental time from egg to adult emergence averaged 29.41 ± 1.85 days, and 47.6% of the eggs developed to adulthood. Female and male survival was 94.42 and 90 days, respectively. Life table parameters show that one female of A. punica is replaced by 86 females (R ₀), the intrinsic growth rate (r _m ) was 0.1115, the average generation time (T) was 40 days, and the doubling time (D _t ) was 6.2 days. The life table parameters suggest that A. punica can be used as a potential predator of C. multicicatrices and, more importantly, provided baseline information for a mass-rearing protocol. This is the first detailed study on the biology of A. punica that reports the potential of this predator as a biological control agent for scale insects of the tribe Iceryini.     

Assessing biodegradation of furfuryl alcohol using <Emphasis Type="Italic">Pseudomonas putida</Emphasis> MTCC 1194 and <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> MTCC 1034 and its kinetics

The biodegradation of furfuryl alcohol (FA) in shake flask experiments using a pure culture of Pseudomonas putida (MTCC 1194) and Pseudomonas aeruginosa (MTCC 1034) was studied at 30 °C and pH 7.0. Experiments were performed at different FA concentrations ranging from 50 to 500 mg/l. Before carrying out the biodegradation studies, the bacterial strains were acclimatized to the concentration of 500 mg/l of FA by gradually raising 100 mg/l of FA in each step. The well acclimatized culture of P. putida and P. aeruginosa degraded about 80 and 66% of 50 mg/l FA, respectively. At higher concentration of FA, the percentage of FA degradation decreased. The purpose of this study was to determine the kinetics of biodegradation of FA by measuring biomass growth rates and concentration of FA as a function of time. Substrate inhibition was calculated from experimental growth parameters using the Haldane equation. Data for P. putida were determined as µ _max ?=?0.23 h^?1, K _s ?=?23.93 mg/l and K _i ?=?217.1 mg/l and for P. aeruginosa were determined as µ _max ?=?0.13 h^?1, K _s ?=?21.3 mg/l and K _i ?=?284.9 mg/l. The experimental data were fitted in Haldane, Aiba and Edwards inhibition models.     

Sex difference in thermal preference of adult mice does not depend on presence of the gonads

Background

The thermoneutral zone (TNZ) is a species-specific range of ambient temperature (T _a), at which mammals can maintain a constant body temperature with the lowest metabolic rate. The TNZ for an adult mouse is between 26 and 34 °C. Interestingly, female mice prefer a higher T _a than male mice although the underlying mechanism for this sex difference is unknown. Here, we tested whether gonadal hormones are dominant factors controlling temperature preference in male and female mice.

Methods

We performed a temperature preference test in which 10-week-old gonadectomized and sham-operated male and female C57BL/6J mice were allowed to choose to reside at the thermoneutral cage of 29 °C or an experimental cage of 26, 29, or 32 °C.

Results

All mice preferred a T _a higher than 26 °C, especially in the inactive phase. Choosing between 29 and 32 °C, female mice resided more at 32 °C while male mice had no preference between the temperatures. Hence, the preferred T _a for female mice was significantly higher (0.9?±?0.2 °C) than that for male mice. However, gonadectomy did not influence the T _a preference.

Conclusions

Female mice prefer a warmer environment than male mice, a difference not affected by gonadectomy. This suggests that thermal-sensing mechanisms may be influenced by sex-specific pathways other than gonadal factors or that the thermoregulatory set point has already been determined prior to puberty.

     

Cloning of <Emphasis Type="Italic">phaCAB</Emphasis> genes from thermophilic <Emphasis Type="Italic">Caldimonas manganoxidans</Emphasis> in <Emphasis Type="Italic">Escherichia coli</Emphasis> for poly(3-hydroxybutyrate) (PHB) production

PHB biosynthesis pathway, consisting of three open reading frames (ORFs) that encode for β-ketothiolase (phaA _Cma , 1179 bp), acetoacetyl-CoA reductase (phaB _Cma , 738 bp), and PHA synthase (phaC _Cma , 1694 bp), of Caldimonas manganoxidans was identified. The functions of PhaA, PhaB, and PhaC were demonstrated by successfully reconstructing PHB biosynthesis pathway of C. manganoxidans in Escherichia coli, where PHB production was confirmed by OD₆₀₀, gas chromatography, Nile blue stain, and transmission electron microscope (TEM). The protein sequence alignment of PHB synthases revealed that phaC _Cma shares at least 60% identity with those of class I PHB synthase. The effects of PhaA, PhaB, and PhaC expression levels on PHB production were investigated. While the overexpression of PhaB is found to be important in recombinant E. coli, performances of PHB production can be quantified as follows: PHB concentration of 16.8 ± 0.6 g/L, yield of 0.28 g/g glucose, content of 74%, productivity of 0.28 g/L/h, and Mw of 1.41 MDa.     

Parameterization of surface irradiance and primary production in Århus Bay,SW Kattegat,Baltic Sea

The aims of the present study were to develop a parameterization of a one-year-long observed PAR time-series, apply the PAR parameterization in a primary production relation, and compare calculated and observed time-series of primary production. The PAR parameterization was applied in the generally used relation for the primary production (P _d): P _d = a(BI ₀ Z ₀) + b with observed photic depth (Z ₀) and Chl-a concentrations (B). It was tested whether the PAR parameterization in combination with this simple relation for primary production was able to describe the actual measured primary production. The study is based on a one year long time-series of PAR, CTD-casts (n = 45), and primary production measurements (n = 24) from Århus Bay (56°09′ N; 10°20′ E), south west Kattegat. Results showed a high and positive correlation between observed and calculated primary production in the bay, as based on the present PAR parameterization combined with the simple primary production relation. The developed PAR parameterization, which calculates total daily surface irradiance per day (M photons m^?2 d^?1), can be applied in any ecological application taking into account that it was developed for the latitude of 56° N.