Physiological and biochemical parameters: new tools to screen barley root exudate allelopathic potential (<Emphasis Type="Italic">Hordeum vulgare</Emphasis> L. subsp. <Emphasis Type="Italic">vulgare</Emphasis>)

Morphological markers/traits are often used in the detection of allelopathic stress, but optical signals including chlorophyll a fluorescence emission could be useful in developing new screening techniques. In this context, the allelopathic effect of barley (Hordeum vulgare subsp. vulgare) root exudates (three modern varieties and three landraces) were assessed on the morphological (root and shoot length, biomass accumulation), physiological (F_v/F_m and F₀), and biochemical (chlorophyll and protein contents) variables of great brome (Bromus diandrus Roth., syn. Bromus rigidus Roth. subsp. gussonii Parl.). All the measured traits were affected when great brome was grown in a soil substrate in which barley plants had previously developed for 30 days before being removed. The response of receiver plants was affected by treatment with activated charcoal, dependent on barley genotype and on the nature of the growing substrate. The inhibitory effect was lower with the addition of the activated charcoal suggesting the release of putative allelochemicals from barley roots into the soil. The barley landraces were more toxic than modern varieties and their effect was more pronounced in sandy substrate than in silty clay sand substrate. In our investigation, the chlorophyll content and F_v/F_m were the most correlated variables with barley allelopathic potential. These two parameters might be considered as effective tools to quantify susceptibility to allelochemical inhibitors in higher plants.     

Production of optically pure 2,3-butanediol from <Emphasis Type="Italic">Miscanthus floridulus</Emphasis> hydrolysate using engineered <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> strains

2,3-Butanediol (2,3-BD) can be produced by fermentation of natural resources like Miscanthus. Bacillus licheniformis mutants, WX-02ΔbudC and WX-02ΔgldA, were elucidated for the potential to use Miscanthus as a cost-effective biomass to produce optically pure 2,3-BD. Both WX-02ΔbudC and WX-02ΔgldA could efficiently use xylose as well as mixed sugars of glucose and xylose to produce optically pure 2,3-BD. Batch fermentation of M. floridulus hydrolysate could produce 21.6 g/L d-2,3-BD and 23.9 g/L meso-2,3-BD in flask, and 13.8 g/L d-2,3-BD and 13.2 g/L meso-2,3-BD in bioreactor for WX-02ΔbudC and WX-02ΔgldA, respectively. Further fed-batch fermentation of hydrolysate in bioreactor showed both of two strains could produce optically pure 2,3-BD, with 32.2 g/L d-2,3-BD for WX-02ΔbudC and 48.5 g/L meso-2,3-BD for WX-02ΔgldA, respectively. Collectively, WX-02ΔbudC and WX-02ΔgldA can efficiently produce optically pure 2,3-BD with M. floridulus hydrolysate, and these two strains are candidates for industrial production of optical purity of 2,3-BD with M. floridulus hydrolysate.     

Enhanced isopropanol and <Emphasis Type="Italic">n</Emphasis>-butanol production by supplying exogenous acetic acid via co-culturing two clostridium strains from cassava bagasse hydrolysate

The focus of this study was to produce isopropanol and butanol (IB) from dilute sulfuric acid treated cassava bagasse hydrolysate (SACBH), and improve IB production by co-culturing Clostridium beijerinckii (C. beijerinckii) with Clostridium tyrobutyricum (C. tyrobutyricum) in an immobilized-cell fermentation system. Concentrated SACBH could be converted to solvents efficiently by immobilized pure culture of C. beijerinckii. Considerable solvent concentrations of 6.19 g/L isopropanol and 12.32 g/L butanol were obtained from batch fermentation, and the total solvent yield and volumetric productivity were 0.42 g/g and 0.30 g/L/h, respectively. Furthermore, the concentrations of isopropanol and butanol increased to 7.63 and 13.26 g/L, respectively, under the immobilized co-culture conditions when concentrated SACBH was used as the carbon source. The concentrations of isopropanol and butanol from the immobilized co-culture fermentation were, respectively, 42.62 and 25.45 % higher than the production resulting from pure culture fermentation. The total solvent yield and volumetric productivity increased to 0.51 g/g and 0.44 g/L/h when co-culture conditions were utilized. Our results indicated that SACBH could be used as an economically favorable carbon source or substrate for IB production using immobilized fermentation. Additionally, IB production could be significantly improved by co-culture immobilization, which provides extracellular acetic acid to C. beijerinckii from C. tyrobutyricum. This study provided a technically feasible and cost-efficient way for IB production using cassava bagasse, which may be suitable for industrial solvent production.     

<Emphasis Type="Italic">In situ</Emphasis> fermentation dynamics during production of <Emphasis Type="Italic">gundruk</Emphasis> and <Emphasis Type="Italic">khalpi</Emphasis>, ethnic fermented vegetable products of the Himalayas

Gundruk is a fermented leafy vegetable and khalpi is a fermented cucumber product, prepared and consumed in the Himalayas. In situ fermentation dynamics during production of gundruk and khalpi was studied. Significant increase in population of lactic acid bacteria (LAB) was found during first few days of gundruk and khlapi fermentation, respectively. Gundruk fermentation was initiated by Lactobacillus brevis, Pediococcus pentosaceus and finally dominated by Lb. plantarum. Similarly in khalpi fermentation, heterofermentative LAB such as Leuconostoc fallax, Lb. brevis and P. pentosaceus initiated the fermentation and finally completed by Lb. plantarum. Attempts were made to produce gundruk and khalpi using mixed starter culture of LAB previously isolated from respective products. Both the products prepared under lab condition had scored higher sensory-rankings comparable to market products.     

Macrokinetic model for Gluconobacter oxydans in 2-keto-L-gulonic acid mixed culture

A set of kinetic models have been developed for the production of 2-keto-L-gulonic acid from L-sorbose by a mixed culture of Gluconobacter oxydans and Bacillus megaterium. A metabolic pathway is proposed for Gluconobacter oxydans, and a macrokinetic model has been developed for Gluconobacter oxydans, where the balances of some key metabolites, ATP and NADH are taken into account. An unstructured model is proposed for concomitant bacterium Bacillus megaterium. In the macrokinetic model and unstructured model, the mechanism of interaction between Gluconobacter oxydans and Bacillus megaterium is investigated and modeled. The specific substrate uptake rate and the specific growth rate obtained from the macrokinetic model are then coupled into a bioreactor model such that the relationship between the substrate feeding rate and the main state variables, such as the medium volume, the biomass concentrations, the substrate, and the is set up. A closed loop regulator model is introduced to approximate the induction of enzyme pool during lag phase after inoculation. Experimental results demonstrate that the model is able to describe 2-keto-L-gulonic acid fermentation process with reasonable accuracy.     

Characterization of phosphate-solubilizing bacteria exhibiting the potential for growth promotion and phosphorus nutrition improvement in maize (<Emphasis Type="Italic">Zea mays</Emphasis> L.) in calcareous soils of Sinaloa,Mexico

Greenhouse bioassays were used to examine the ability of selected strains of the rhizobacteria Sinorhizobium meliloti, Bacillus flexus and B. megaterium to solubilize phosphorus (P) and to affect growth promotion and phosphorus nutrition in maize. These bacterial strains were found to decrease the pH and solubilize some forms of insoluble P, such as tricalcium phosphate and hydroxyapatite, as well as to exhibit acid and alkaline phosphatase enzymatic activities in culture medium, properties that are possibly involved in P solubilization. Inoculation of the strains separately and as a consortium of the three bacteria (S. meliloti, B. flexus and B. megaterium) in P-deficient soil (4.33 w/v P) fertilized without P improved plant height, shoot and root dry weight, as well as P nutrition in the maize plants. Use of the B. flexus and B. megaterium strains separately and in a consortium positively affected several growth parameters and P nutrition in plants supplemented with insoluble P. No effect was observed when pots in which the seedlings were growing were supplied with soluble fertilizer. A second assay using a P-deficient soil (6.64 w/v P) showed that inoculation with the consortium of B. flexus and B. megaterium significantly increased growth and total P content in maize plants. A dose–response P fertilization experiment using sterile P-deficient soil led us to conclude that inoculation to soil of the mixture of B. flexus and B. megaterium may improve P nutrition and growth to a level previously attained by the addition of soluble P-fertilizer at 40 w/v P. A non-sterile experiment showed a beneficial response with B. megaterium but not with B. flexus. We propose utilizing these bacteria in P-deficient alkaline soils in future field trials in order to evaluate their potential as biofertilizers.     

Genome sizes and phylogenetic relationships suggest recent divergence of closely related species of the <Emphasis Type="Italic">Limonium vulgare</Emphasis> complex (Plumbaginaceae)

Limonium vulgare and related species form a complex group, but until now cytological and genetic studies have been based on single species and specific geographical areas. We investigated genome size, karyological and genetic diversity in samples from Western Mediterranean and evaluated the phylogenetic relationships among the species of this complex. Genome size was assessed using flow cytometry on samples from natural populations of L. vulgare, L. maritimum and L. narbonense. Chromosome counts were conducted in plants obtained from seeds collected in the field. The internal transcribed spacer ITS1 of the nuclear rDNAs was used to assess ITS polymorphisms as well as the phylogenetic relationships within the L. vulgare complex. Our analyses showed that all species were tetraploid, with the chromosome number of L. maritimum being presented here for the first time. Significant differences were observed in genome size, with L. narbonense having lower genome sizes than the other two species, and possible aneuploids being detected. Ten new ITS sequences from L. vulgare, L. narbonense and L. maritimum were provided. Most species’ populations showed unique ribotypes, and L. narbonense has the highest ribotype diversity. One of the L. maritimum populations presented a closer genetic relationship with L. vulgare, whereas the other two seemed to be more related with L. narbonense. Phylogenetic analyses confirmed that L. vulgare and L. narbonense form a monophyletic group, sister to the remaining Limonium species. Our results put into evidence that the studied species may represent a relatively early stage of divergence.     

Nectar thieves or invited pollinators? A case study of tansy flowers and common house mosquitoes

Mosquitoes are generally considered nectar thieves that do not contribute to the pollination of the flowers they visit. Here we tested the hypothesis that the common house mosquito, Culex pipiens, contributes to the pollination of tansies, Tanacetum vulgare, and possibly the pollination of other members of the Asteraceae (Achillea millefolium, Leucanthemum vulgare, Solidago canadensis). To test this hypothesis, we (1) field-collected mosquitoes probing inflorescences of T. vulgare, A. millefolium, and L. vulgare, and recorded the number and distribution of pollen grains on their bodies, (2) exposed laboratory-reared Cx. pipiens to inflorescences of T. vulgare, A. millefolium, and S. canadensis, and (3) ran pollination experiments with Cx. pipiens and T. vulgare in a greenhouse. We found (1) that 41 of 164 field-collected Cx. pipiens carried pollen, (2) that 48, 34, and 34 % of Cx. pipiens accumulated pollen from T. vulgare, A. millefolium, and S. canadensis, respectively, during floral visits of greenhouse-grown specimens, and (3) that cross-pollination by Cx. pipiens resulted in significant seed set of T. vulgare in pollination experiments. Based on our observations that Cx. pipiens are frequent floral visitors and are able to carry pollen and to induce seed set in T. vulgare, it is clear that Cx. pipiens plays a role in the pollination of T. vulgare, and possibly other members of the Asteraceae.     

A Two-Stage System for the Large-Scale Cultivation of Biomass: a Design and Operation Analysis Based on a Simple Steady-State Model Tuned on Laboratory Measurements

The optimal design and operation at large scale of a continuous fermentation process including a biological reactor/photobioreactor and a gravity settler with partial recycle and purge of the biomass are addressed. The proposed method is developed with reference to microalgae (Scenedesmus obliquus) cultivation, but it can be applied to any fermentation process as well as to activated sludge wastewater treatment. A procedure is developed to predict the effect of process variables, mainly the recycle ratio (R), the solid retention time (θ _c ), the reactor residence time (θ), and the ratio between feed and purge flow rates (F _I /F _W ). It includes a simple steady-state model of the two units coupled in the process and the experimental measurement of basic kinetic data, in both the bioreactor and the settler, for the tuning of model parameters. The bioreactor is assumed as perfectly mixed, and a rigorous gravity-flux approach is used for the settler. The process model is solved in terms of dimensionless variables, and plots are given to allow sensitivity analyses and optimization of operating conditions. A discussion about washout is presented, and a simple method is outlined for the calculation of the minimum values of residence time (θ _min ) and recycle ratio (R _min ) and of the maximum allowed recycle ratio (R _{max,operating} ) and biomass purge rate (F _Wmax ). In particular, it is shown that the system is sensitive to the concentration of biomass lost from the top of the settler (C _X ^S ). The proposed method can be useful for the design and analysis of large-scale processes of this type.     

Use of <Emphasis Type="Italic">Cupriavidus basilensis</Emphasis>-aided bioabatement to enhance fermentation of acid-pretreated biomass hydrolysates by <Emphasis Type="Italic">Clostridium beijerinckii</Emphasis>

Lignocellulose-derived microbial inhibitors (LDMICs) prevent efficient fermentation of Miscanthus giganteus (MG) hydrolysates to fuels and chemicals. To address this problem, we explored detoxification of pretreated MG biomass by Cupriavidus basilensis ATCC^®BAA-699 prior to enzymatic saccharification. We document three key findings from our test of this strategy to alleviate LDMIC-mediated toxicity on Clostridium beijerinckii NCIMB 8052 during fermentation of MG hydrolysates. First, we demonstrate that growth of C. basilensis is possible on furfural, 5-hydroxymethyfurfural, cinnamaldehyde, 4-hydroxybenzaldehyde, syringaldehyde, vanillin, and ferulic, p-coumaric, syringic and vanillic acid, as sole carbon sources. Second, we report that C. basilensis detoxified and metabolized ~98 % LDMICs present in dilute acid-pretreated MG hydrolysates. Last, this bioabatement resulted in significant payoffs during acetone-butanol-ethanol (ABE) fermentation by C. beijerinckii: 70, 50 and 73 % improvement in ABE concentration, yield and productivity, respectively. Together, our results show that biological detoxification of acid-pretreated MG hydrolysates prior to fermentation is feasible and beneficial.     

Growth and wax ester production of an <Emphasis Type="Italic">Acinetobacter baylyi</Emphasis> ADP1 mutant deficient in exopolysaccharide capsule synthesis

Acinetobacter baylyi ADP1 naturally produces wax esters that could be used as a raw material in industrial applications. We attempted to improve wax ester yield of A. baylyi ADP1 by removing rmlA, a gene involved in exopolysaccharide production. Growth rate, biomass formation and wax ester yield on 4-hydroxybenzoate were not affected, but the rmlA ^? strain grew slower on acetate, while reaching similar biomass and wax ester yield. The rmlA ^? cells had malformed shape and large size and grew poorly on glucose without expression of the gene for pyruvate kinase (pykF) from Escherichia coli. The pykF-expressing rmlA ^? strain had similar growth rate, lowered biomass formation and improved wax ester production on glucose as compared to the wild-type strain expressing pykF. Cultivation of the pykF-expressing rmlA ^? strain on an elevated glucose concentration in a medium supplemented with amino acids resulted in doubled molar wax ester yield and acetate production.     

Deletion of <Emphasis Type="Italic">ldh</Emphasis>A and <Emphasis Type="Italic">ald</Emphasis>H genes in <Emphasis Type="Italic">Klebsiella</Emphasis><Emphasis Type="Italic">pneumoniae</Emphasis> to enhance 1,3-propanediol production

Objectives

To improve 1,3-propanediol (1,3-PD) production and reduce byproduct concentration during the fermentation of Klebsiella pneumonia.

Results

Klebsiella. pneumonia 2-1ΔldhA, K. pneumonia 2-1ΔaldH and K. pneumonia 2-1ΔldhAΔaldH mutant strains were obtained through deletion of the ldhA gene encoding lactate dehydrogenase required for lactate synthesis and the aldH gene encoding acetaldehyde dehydrogenase involved in the synthesis of ethanol. After fed-batch fermentation, the production of 1,3-PD from glycerol was enhanced and the concentrations of byproducts were reduced compared with the original strain K. pneumonia 2-1. The maximum yields of 1,3-PD were 85.7, 82.5 and 87.5 g/l in the respective mutant strains.

Conclusion

Deletion of either aldH or ldhA promoted 1,3-PD production in K. pneumonia.

     

Dynamics and diversity of a microbial community during the fermentation of industrialized <Emphasis Type="Italic">Qingcai</Emphasis> paocai,a traditional Chinese fermented vegetable food,as assessed by Illumina MiSeq sequencing,DGGE and qPCR assay

Paocai is a traditional Chinese fermented food and typically produced via spontaneous fermentation. We have investigated the microbial community utilized for the fermentation of industrialized Qingcai paocai using the combination of Illumina MiSeq sequencing, PCR-mediated denaturing gradient gel electrophoresis (PCR-DGGE) and quantitative PCR (qPCR) assay. Three main phyla, namely Firmicutes, Proteobacteria and Bacteroidetes, were identified by both MiSeq sequencing and PCR-DGGE. The dominant genera observed in the fermentation were Lactobacillus, Pseudomonas, Vibrio and Halomonas. Most genera affiliated with Proteobacteria or Bacteroidetes were detected more often during the earlier part of the fermentation, while Lactobacillus (affiliated with Firmicutes) was dominant during the later fermentation stages. Fungal community analysis revealed that Debaryomyces, Pichia and Kazachstania were the main fungal genera present in industrialized Qingcai paocai, with Debaryomyces being the most dominant during the fermentation process. The quantities of dominant genera Lactobacillus and Debaryomyces were monitored using qPCR and shown to be 10⁹–10¹² and 10⁶–10¹⁰ copies/mL, respectively. During the later fermentation process of industrialized Qingcai paocai, Lactobacillus and Debaryomyces were present at 10¹¹ and 10⁸ copies/mL, respectively. These results facilitate further understanding of the unique microbial ecosystem during the fermentation of industrialized Qingcai paocai and guide future improvement of the fermentation process.     

High-level expression and biochemical characterization of a novel cold-active lipase from <Emphasis Type="Italic">Rhizomucor endophyticus</Emphasis>

Objectives

To identify novel cold-active lipases from fungal sources and improve their production by heterologous expression in Pichia pastoris.

Results

A novel cold-active lipase gene (ReLipB) from Rhizomucor endophyticus was cloned. ReLipB was expressed at a high level in Pichia pastoris using high cell-density fermentation in a 5-l fermentor with the highest lipase activity of 1395 U/ml. The recombinant lipase (RelipB) was purified and biochemically characterized. ReLipB was most active at pH 7.5 and 25 °C. It was stable from pH 4.5–9.0. It exhibited broad substrate specificity towards p-nitrophenyl (pNP) esters (C₂–C₁₆) and triacylglycerols (C₂–C₁₂), showing the highest specific activities towards pNP laurate (231 U/mg) and tricaprylin (1840 U/mg), respectively. In addition, the enzyme displayed excellent stability with high concentrations of organic solvents including cyclohexane, n-hexane, n-heptane, isooctane and petroleum ester and surfactants.

Conclusions

A novel cold-active lipase from Rhizomucor endophyticus was identified, expressed at a high level and biochemically characterized. The high yield and unique enzymatic properties make this lipase of some potential for industrial applications.

     

Diverse molecular resistance mechanisms of <Emphasis Type="Italic">Bacillus megaterium</Emphasis> during metal removal present in a spent catalyst

Bacillus megaterium strain MNSH1-9K-1, isolated from a high-metal content site in Guanajuato, Mexico, has the intrinsic capacity to remove vanadium (V) and nickel (Ni) from a petrochemical spent catalyst, and counteract the toxic effects produced in the cell due to the presence of oxidative stress. Since knowledge of the molecular components involved in the microbial resistance to spent catalysts is scarce, this study aimed to identify the proteins potentially involved in the enhanced resistance of a B. megaterium strain, during the removal of metals contained in a spent catalyst. Thus, the current research uses a proteomic approach to investigate and evidence the differences in the molecular resistance mechanisms of two B. megaterium strains, one isolated from a mining site and a wild type strain, when both are exposed to a spent catalyst. In addition, we studied their ability to eliminate nickel (Ni), vanadium (V), aluminum (Al) and molybdenum (Mo). The data presented here may contribute to the knowledge of the molecular mechanisms involved in the resistance of B. megaterium to high metal content wastes, as well as its potential utilization for the recovery of valuable industrial metals.     

Employing oxygen pulses to modulate <Emphasis Type="Italic">Lachancea thermotolerans</Emphasis>–<Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> Chardonnay fermentations

Oxygen is sometimes deliberately introduced in winemaking at various stages to enhance yeast biomass formation and prevent stuck fermentation. However, there is limited information on how such interventions affect the dynamics of yeast populations. Our previous study in synthetic grape juice showed that oxygen supply enhances the persistence of Lachancea thermotolerans, Torulaspora delbrueckii and Metschnikowia pulcherrima. The three non-Saccharomyces yeasts showed differences in growth as a function of oxygen. The present study focused on evaluating the influence of short oxygen pulses on population dynamics and the aroma profile of Chardonnay wine inoculated with L. thermotolerans and Saccharomyces cerevisiae. The results confirmed a positive effect of oxygen on the relative performance of L. thermotolerans. The mixed culture fermentation with L. thermotolerans with S. cerevisiae developed a distinct aroma profile when compared to monoculture S. cerevisiae. Specifically, a high concentration of esters, medium chain fatty acids and higher alcohols was detected in the mixed culture fermentation. The data also showed that the longer persistence of L. thermotolerans due to addition of oxygen pulses influenced the formation of major volatile compounds such as ethyl acetate, ethyl butyrate, ethyl hexanoate, ethyl caprylate, ethyl caprate, ethyl-3-hydroxybutanoate, ethyl phenylacetate, propanol, isobutanol, butanol, isoamyl alcohol, hexanol, isobutyric acid, butyric acid, iso-valeric acid, hexanoic acid, octanoic acid, and decanoic acid.     

A new source of resistance to 2-furaldehyde from <Emphasis Type="Italic">Scheffersomyces</Emphasis> (<Emphasis Type="Italic">Pichia</Emphasis>) <Emphasis Type="Italic">stipitis</Emphasis> for sustainable lignocellulose-to-biofuel conversion

Aldehyde inhibitory compounds derived from lignocellulosic biomass pretreatment have been identified as a major class of toxic chemicals that interfere with microbial growth and subsequent fermentation for advanced biofuel production. Development of robust next-generation biocatalyst is a key for a low-cost biofuel production industry. Scheffersomyces (Pichia) stipitis is a naturally occurring C-5 sugar utilization yeast; however, little is known about the genetic background underlying its potential tolerance to biomass conversion inhibitors. We investigated and identified five uncharacterized putative aryl-alcohol dehydrogenase genes (SsAADs) from this yeast as a new source of resistance against biomass fermentation inhibitor 2-furaldehyde (furfural) by gene expression, gene cloning, and direct enzyme assay analysis using partially purified proteins. All five proteins from S. stipitis showed furfural reduction using cofactor NADH. An optimum active temperature was observed at 40 °C for SsAad1p; 30 °C for SsAad3p, SsAad4p, and SsAad5p; and 20 °C for SsAad2p. SsAad2p, SsAad3p, and SsAad4p showed tolerance to a wide range of pH from 4.5 to 8, but SsAad1p and SsAad5p were sensitive to pH changes beyond 7. Genes SsAAD2, SsAAD3, and SsAAD4 displayed significantly enhanced higher levels of expression in response to the challenge of furfural. Their encoding proteins also showed higher levels of specific activity toward furfural and were suggested as core functional enzymes contributing aldehyde resistance in S. stipitis.     

Can enemy release explain the invasion success of the diploid <Emphasis Type="Italic">Leucanthemum vulgare</Emphasis> in North America?

Enemy release is a commonly accepted mechanism to explain plant invasions. Both the diploid Leucanthemum vulgare and the morphologically very similar tetraploid Leucanthemum ircutianum have been introduced into North America. To verify which species is more prevalent in North America we sampled 98 Leucanthemum populations and determined their ploidy level. Although polyploidy has repeatedly been proposed to be associated with increased invasiveness in plants, only two of the populations surveyed in North America were the tetraploid L. ircutianum. We tested the enemy release hypothesis by first comparing 20 populations of L. vulgare and 27 populations of L. ircutianum in their native range in Europe, and then comparing the European L. vulgare populations with 31 L. vulgare populations sampled in North America. Characteristics of the site and associated vegetation, plant performance and invertebrate herbivory were recorded. In Europe, plant height and density of the two species were similar but L. vulgare produced more flower heads than L. ircutianum. Leucanthemum vulgare in North America was 17 % taller, produced twice as many flower heads and grew much denser compared to L. vulgare in Europe. Attack rates by root- and leaf-feeding herbivores on L. vulgare in Europe (34 and 75 %) was comparable to that on L. ircutianum (26 and 71 %) but higher than that on L. vulgare in North America (10 and 3 %). However, herbivore load and leaf damage were low in Europe. Cover and height of the co-occurring vegetation was higher in L. vulgare populations in the native than in the introduced range, suggesting that a shift in plant competition may more easily explain the invasion success of L. vulgare than escape from herbivory.