Association mapping of agronomic traits on chromosome 2A of wheat

Association mapping is a method to test the association between molecular markers and quantitative trait loci (QTL) based on linkage disequilibrium (LD). In this study, the collection of 108 wheat germplasm accessions form China were evaluated for their plant heights, spike length, spikelets per spike, grains per spike, thousand kernel weight and spikelets density in 3 years at three locations. And they were genotyped with 85 SSR markers and 40 EST-SSR markers. The population structure was inferred on the basis of unlinked 48 SSR markers and 40 EST-SSR markers. The extent of LD on chromosome 2A was 2.3 cM. Association of 37 SSR loci on chromosomes 2A with six agronomic traits was analysed with a mixed linear model. A total of 14 SSR loci were significantly associated with agronomic traits. Some of the associated markers were located in the QTL region detected in previous linkage mapping analysis. Our results demonstrated that association mapping can enhance QTL information and achieves higher resolution with short LD extent.     

The effect of semi-dwarf genes on root system size in field-grown barley

Root system size (RSS) was measured in 12 diverse barley genotypes and 157 double-haploid lines (DHs), using electric capacitance. The parents of the DHs, Derkado and B83-12/21/5, carry different semi-dwarfing genes, sdw1 and ari-e.GP, respectively. Estimates of RSS were taken in the field thrice during plant development: stem elongation (RSS1), heading (RSS2) and grain filling (RSS3). The 12 barley genotypes were assessed over 3 years and at two or three locations each year; the DH mapping population was assessed at two locations in 2002. Among the 12 barley genotypes, those with the semi-dwarf genes had greater RSS values in all 3 years (28.9, 24.6 and 15.0% in years 1, 2 and 3, respectively) compared to non-semi-dwarf controls. The DH population showed transgressive segregation on both sides of the parent means, indicating polygenic control of RSS. Quantitative trait loci (QTLs) for RSS were found on five of the seven chromosomes: 1H, 3H, 4H, 5H and 7H and these were compared with previously mapped agronomic traits. The TotalRSS QTL on 3H was associated with sdw1 and QTLs for height, plant yield and plant weight. The RSS3 QTL on 5H was associated with ari-e.GP and QTLs for height, plant yield, plant weight, harvest index and tiller number. The RSS3 QTL on 7H was also associated with a TotalRSS QTL and QTLs for plant weight and harvest index. Other RSS QTLs were not associated with any other trait studied. RSS is considered to be a polygenic trait linked to important traits, in particular to yield. The study highlights the effects of semi-dwarfing genes and discusses the potential for breeding for root traits.     

Identification and verification of QTLs for agronomic traits using wild barley introgression lines

A set of 39 wild barley introgression lines (hereafter abbreviated with S42ILs) was subjected to a QTL study to verify genetic effects for agronomic traits, previously detected in the BC₂DH population S42 (von Korff et al. 2006 in Theor Appl Genet 112:1221–1231) and, in addition, to identify new QTLs and favorable wild barley alleles. Each line within the S42IL set contains a single marker-defined chromosomal introgression from wild barley (Hordeum vulgare ssp. spontaneum), whereas the remaining part of the genome is exclusively derived from elite spring barley (H. vulgare ssp. vulgare). Agronomic field data of the S42ILs were collected for seven traits from three different environments during the 2007 growing season. For detection of putative QTLs, a two-factorial mixed model ANOVA and, subsequently, a Dunnett test with the recurrent parent as a control were conducted. The presence of a QTL effect on a wild barley introgression was accepted, if the trait value of a particular S42IL was significantly (P < 0.05) different from the control, either across all environments and/or in a particular environment. A total of 47 QTLs were localized in the S42IL set, among which 39 QTLs were significant across all tested environments. For 19 QTLs (40.4%), the wild barley introgression was associated with a favorable effect on trait performance. Von Korff et al. (2006 in Theor Appl Genet 112:1221–1231) mapped altogether 44 QTLs for six agronomic traits to genomic regions, which are represented by wild barley introgressions of the S42IL set. Here, 18 QTLs (40.9%) revealed a favorable wild barley effect on the trait performance. By means of the S42ILs, 20 out of the 44 QTLs (45.5%) and ten out of the 18 favorable effects (55.6%) were verified. Most QTL effects were confirmed for the traits days until heading and plant height. For the six corresponding traits, a total of 17 new QTLs were identified, where at six QTLs (35.3%) the exotic introgression caused an improved trait performance. In addition, eight QTLs for the newly studied trait grains per ear were detected. Here, no QTL from wild barley exhibited a favorable effect. The introgression line S42IL-107, which carries an introgression on chromosome 2H, 17–42 cM is an example for S42ILs carrying several QTL effects simultaneously. This line exhibited improved performance across all tested environments for the traits days until heading, plant height and thousand grain weight. The line can be directly used to transfer valuable Hsp alleles into modern elite cultivars, and, thus, for breeding of improved varieties.     

Association of Agronomic Traits with SNP Markers in Durum Wheat (Triticum turgidum L. durum (Desf.))

Association mapping is a powerful approach to detect associations between traits of interest and genetic markers based on linkage disequilibrium (LD) in molecular plant breeding. In this study, 150 accessions of worldwide originated durum wheat germplasm (Triticum turgidum spp. durum) were genotyped using 1,366 SNP markers. The extent of LD on each chromosome was evaluated. Association of single nucleotide polymorphisms (SNP) markers with ten agronomic traits measured in four consecutive years was analyzed under a mix linear model (MLM). Two hundred and one significant association pairs were detected in the four years. Several markers were associated with one trait, and also some markers were associated with multiple traits. Some of the associated markers were in agreement with previous quantitative trait loci (QTL) analyses. The function and homology analyses of the corresponding ESTs of some SNP markers could explain many of the associations for plant height, length of main spike, number of spikelets on main spike, grain number per plant, and 1000-grain weight, etc. The SNP associations for the observed traits are generally clustered in specific chromosome regions of the wheat genome, mainly in 2A, 5A, 6A, 7A, 1B, and 6B chromosomes. This study demonstrates that association mapping can complement and enhance previous QTL analyses and provide additional information for marker-assisted selection.     

Detection and verification of malting quality QTLs using wild barley introgression lines

A malting quality quantitative trait locus (QTL) study was conducted using a set of 39 wild barley introgression lines (hereafter abbreviated with S42ILs). Each S42IL harbors a single marker-defined chromosomal segment from the wild barley accession ‘ISR 42-8’ (Hordeum vulgare ssp. spontaneum) within the genetic background of the elite spring barley cultivar ‘Scarlett’ (Hordeum vulgare ssp. vulgare). The aim of the study was (1) to verify genetic effects previously identified in the advanced backcross population S42, (2) to detect new QTLs, and (3) to identify S42ILs exhibiting multiple QTL effects. For this, grain samples from field tests in three different environments were subjected to micro malting. Subsequently, a line × phenotype association study was performed with the S42ILs in order to localize putative QTL effects. A QTL was accepted if the trait value of a particular S42IL was significantly (P < 0.05) different from the recurrent parent as a control, either across all tested environments or in a particular environment. For eight malting quality traits, altogether 40 QTLs were localized, among which 35 QTLs (87.5%) were stable across all environments. Six QTLs (15.0%) revealed a trait improving wild barley effect. Out of 36 QTLs detected in a previous advanced backcross QTL study with the parent BC₂DH population S42, 18 QTLs (50.0%) could be verified with the S42IL set. For the quality parameters α-amylase activity and Hartong 45°C, all QTLs assessed in population S42 were verified by S42ILs. In addition, eight new QTL effects and 17 QTLs affecting two newly investigated traits were localized. Two QTL clusters harboring simultaneous effects on eight and six traits, respectively, were mapped to chromosomes 1H and 4H. In future, fine-mapping of these QTL regions will be conducted in order to shed further light on the genetic basis of the most interesting QTLs.     

A quantitative trait locus for long photoperiod response mapped on chromosome 4H in barley

Photoperiod response is a key determinant for barley adaptation to diverse environments. A major quantitative trait locus (QTL) for response to long photoperiod was identified in Australia (Perth, 31°56??S) and China (Wuhan, 30°33??N) using 178 doubled haploid lines derived from a cross of an Australian barley, Baudin, and a Canadian barley, AC Metcalfe. The QTL was detected as a major QTL in the 18-h photoperiod glasshouse experiments and mapped to the Xp12m50B199?CXp13m47B399 interval on chromosome 4H with a LOD score of 57 in Australia and confirmed in China. The single QTL accounted for 77.48 and 37.81% of phenotypic variation for long photoperiod response in Australia and China, respectively. The same QTL also controlled heading date in Australia, under normal and extended photoperiod conditions, and in China, under extended photoperiod and late-sown conditions. The QTL advanced heading date by 27.8?days in Australia and 42.5?days in China under a 18-h photoperiod. In addition, QTL for heading date were identified on chromosomes 2H and 3H. The chromosome 3H QTL was associated with the denso gene and detected in all conditions, but the chromosome 2H QTL was only detected in Australia. The new photoperiod response QTL, Qhea.BM.4-13/Qpho.BM.4-13, on chromosome 4H and its associated markers will provide an alternative for plant breeders developing new varieties for different environments using marker-assisted selection.     

Identification of quantitative trait loci contributing to yield and seed quality parameters under terminal drought in barley advanced backcross lines

Drought is a major limiting factor for barley production, especially in the primary areas of its cultivation. Wild barley represents a major source of favourable alleles for increasing the genetic variation for multiple traits including resistance to both biotic and abiotic stresses. We used advanced backcross quantitative trait locus (AB-QTL) analysis of a BC3-doubled haploid population developed between the cultivated parent Brenda (Hordeum vulgare ssp. vulgare) and the wild accession HS584 (H. vulgare ssp. spontaneum) to study the contribution of wild barley in improving various agronomic and seed quality traits under post-anthesis drought. The experiment was carried out at two different locations (IPK, Gatersleben and Nordsaat, Böhnshausen) and terminal drought was imposed by withholding water or spraying with potassium iodide at 10 days after flowering under greenhouse or field conditions, respectively. QTL analysis indicated that wild barley contributed favourably to most of the traits studied under both control and drought conditions. A total of seven hot-spot QTL regions with co-localizing QTL for various traits harboured more than 80 % of the stable QTL detected in the present study. For yield and thousand-grain weight and their respective drought tolerance indices, most of the QTL were derived from Brenda. On the other hand, for traits like seed length and seed nitrogen content, all the QTL were contributed by HS584, the parent having higher trait value. A significantly reduced carbon/nitrogen (C/N) ratio in the selected contrasting inferior lines compared to superior ones suggests that C/N ratio could be a potential parameter for screening not just seed quality parameters but also grain weight performance under terminal drought.     

Comparative QTL analysis of early short-time drought tolerance in Polish fodder and malting spring barleys

Key message

An effective approach for the further evolution of QTL markers, may be to create mapping populations for locally adapted gene pools, and to phenotype the studied trait under local conditions.

Abstract

Mapping populations of Polish fodder and malting spring barleys (Hordeum vulgare L.) were used to analyze traits describing short-time drought response at the seedlings stage. High-throughput genotyping (Diversity Array Technology (DArT) markers) and phenotyping techniques were used. The results showed high genetic diversity of the studied populations which allowed the creation of high-density linkage maps. There was also high diversity in the physiological responses of the barleys. Quantitative trait locus (QTL) analysis revealed 18 QTLs for nine physiological traits on all chromosomes except 1H in malting barley and 15 QTLs for five physiological traits on chromosomes 2H, 4H, 5H and 6H in fodder barley. Chromosomes 4H and 5H contained QTLs which explained most of the observed phenotypic variations in both populations. There was a major QTL for net photosynthetic rate in the malting barley located on chromosome 5H and two major QTLs for overall photochemical performance (PI) located on 5H and 7H. One major QTL related to photochemical quenching of chlorophyll fluorescence was located on chromosome 4H in fodder barley. Three QTL regions were common to both mapping populations but the corresponding regions explained different drought-induced traits. One region was for QTLs related to PSII photosynthetic activity stress index in malting barley, and the corresponding region in fodder barley was related to the water content stress index. These results are in accordance with previous studies which showed that different traits were responsible for drought tolerance variations in fodder and malting barleys.     

Genome-Wide Association Mapping for Kernel and Malting Quality Traits Using Historical European Barley Records

Malting quality is an important trait in breeding barley (Hordeum vulgare L.). It requires elaborate, expensive phenotyping, which involves micro-malting experiments. Although there is abundant historical information available for different cultivars in different years and trials, that historical information is not often used in genetic analyses. This study aimed to exploit historical records to assist in identifying genomic regions that affect malting and kernel quality traits in barley. This genome-wide association study utilized information on grain yield and 18 quality traits accumulated over 25 years on 174 European spring and winter barley cultivars combined with diversity array technology markers. Marker-trait associations were tested with a mixed linear model. This model took into account the genetic relatedness between cultivars based on principal components scores obtained from marker information. We detected 140 marker-trait associations. Some of these associations confirmed previously known quantitative trait loci for malting quality (on chromosomes 1H, 2H, and 5H). Other associations were reported for the first time in this study. The genetic correlations between traits are discussed in relation to the chromosomal regions associated with the different traits. This approach is expected to be particularly useful when designing strategies for multiple trait improvements.     

Variation in feed quality traits for beef cattle in Steptoe?×?Morex barley population

Barley is a major feed source for livestock in the western regions of North America. Feed quality of beef cattle has been neglected as a selection criterion because of lack of understanding of the feed characteristics that could be responsive to selection and would improve feedlot performance. A Steptoe × Morex population was planted in irrigated and rain-fed environments, and collected data were used to evaluate the genetic variation in dry matter and starch digestibilities, acid detergent fiber, protein and starch contents, and to map quantitative trait loci controlling the variation in these traits. Transgressive genotypes indicate the wide genetic variation of these traits. High heritability estimates for these traits suggest that early selection for these traits during breeding would be achievable. A total of 32 main effect QTL and five epistatic QTL were identified which conditioned feed traits on different barley chromosomes. QTL for acid detergent fiber and starch contents overlapped on chromosome 6H at the Nar7 locus. Tight negative correlation between the two traits suggest the usability of Nar7 as anchor marker in marker-assisted selection programs to develop barley with low acid detergent fiber and high starch content.     

Validation of quantitative trait loci for Fusarium head blight and kernel discoloration in barley

Validation of quantitative trait loci (QTLs) is a prerequisite to marker assisted selection (MAS), however, only a fraction of QTLs identified for important plant traits have been independently tested for validation. Resistance to the diseases kernel discoloration (KD) and Fusarium head blight (FHB) in barley is complex and technically difficult to assess, and therefore QTLs for these traits are suitable targets for MAS. We selected two lines, from a QTL mapping population created using the resistant variety Chevron, and crossed them to susceptible parents to generate two validation populations. Genetic maps of both populations were developed for five chromosomes covering 15 selected regions containing QTLs for FHB severity, KD score and concentration of deoxynivalenol (DON), a mycotoxin produced by the FHB pathogen. QTL analyses using these validation populations confirmed that five of the possible 15 QTL regions were associated with at least one of the three traits. While some QTL were detected inconsistently across environments, QTL that could be subjected to validation in both populations were confirmed in both populations in seven out of eight instances. A QTL for KD score on chromosome 6(6H) was confirmed in both validation populations in eight of nine environments and was also associated with FHB in three of six environments. A QTL for FHB on chromosome 2(2H) was confirmed and was also associated with KD and heading date. Marker assisted selection at these two QTLs should enhance disease resistance, however, the QTL on chromosome 2(2H) will also delay heading date.     

Association mapping of grain hardness,polyphenol oxidase,total phenolics,amylose content,and β-glucan in US barley breeding germplasm

A renewed interest in breeding barley specifically for food end-uses is being driven by increased consumer interest in healthier foods. We conducted association mapping on physicochemical properties of barley that play a role in food quality and processing including grain hardness, polyphenol oxidase activity, total phenolics, amylose content, and β-glucan. We used 3,069 elite two-row and six-row spring barley breeding lines from eight US breeding programs and 2,041 SNP markers for association mapping. Marker–trait associations were identified using a mixed model that incorporated population structure and kinship. We detected two previously identified QTL for grain hardness on chromosome 2H in the telomeric region of 5H along with two novel regions on 4H and 6H. For amylose content, we detected marker–trait associations on 7H from 0.63 to 30 cM. We detected four regions on chromosomes 1H, 2H, 3H, and 4H associated with polyphenol oxidase activity. The chromosome 2H region co-localized with the two previously mapped polyphenol oxidase genes PPO1 and PPO2, and the regions on chromosomes 1H, 3H, and 4H QTL were novel. For total phenolics, we identified three significant regions on 3H, 4H, and 5H. Two regions on 2H and 7H were associated with β-glucan. Both previously identified and novel QTL are segregating in elite US breeding germplasm. Only three of the 24 SNPs that were associated with traits using either the two-row or six-row mapping panel were identified in both panels. Nine SNPs were detected in the individual two-row or six-row panels that were not detected in the analysis using the complete panel and accounting for population structure. The distribution of favorable alleles at these loci that underpin food quality across the breeding programs suggests several strategies to use markers to improve barley for food uses.     

Efficient construction of high-density linkage map and its application to QTL analysis in barley

Using a High Efficiency Genome Scanning (HEGS) system and recombinant inbred (RI) lines derived from the cross of Russia 6 and H.E.S. 4, a high-density genetic map was constructed in barley. The resulting 1,595.7-cM map encompassed 1,172 loci distributed on the seven linkage groups comprising 1,134 AFLP, 34 SSR, three STS and vrs1 (kernel row type) loci. Including PCR reactions, gel electrophoresis and data processing, 6 months of work by a single person was sufficient for the whole mapping procedure under a reasonable cost. To make an appraisal of the resolution of genetic analysis for the 95 RI lines based on the constructed linkage map, we measured three agronomic traits: plant height, spike exsertion length and 1,000-kernel weight, and the analyzed quantitative trait loci (QTLs) associated with these traits. The results were compared on the number of detected QTLs and their effects between a high-density map and a skeleton map constructed by selected AFLP and anchor markers. The composite interval mapping on the high-density map detected more QTLs than the other analyses. Closely linked markers with QTLs on the high-density map could be powerful tools for marker-assisted selection in barley breeding programs and further genetic analyses including an advanced backcross analysis or a map-based cloning of QTL. Electronic Supplementary Material Supplementary material is available in the online version of this article at Communicated by J.S. Heslop-Harrison     

Genetic analysis of grain and malt quality in an elite barley population

Quantitative trait loci (QTLs) associated with grain weight, grain width, kernel hardness and malting quality were mapped in a doubled haploid population derived from two elite Australian malting barley varieties, Navigator and Admiral. A total of 30 QTLs for grain weight, grain width and kernel hardness were identified in three environments, and 63 QTLs were identified for ten malting quality traits in two environments. Three malting quality traits, namely β-amylase, diastatic power and apparent attenuation limit, were mainly controlled by a QTL linked to the Bmy1 gene at the distal end of chromosome 4H encoding a β-amylase enzyme. Six other malting quality traits, namely α-amylase, soluble protein, Kolbach index, free amino-acid nitrogen, wort β-glucan and viscosity, had coincident QTL clustered on chromosomes 1HS, 4HS, 7HS and 7HL, which demonstrated the interdependence of these traits. There was a strong association between these malt quality QTL clusters on chromosomes 1HS and 7HL and the major QTL for kernel hardness, suggesting that the use of this trait to enable early selection for malting quality in breeding programs would be feasible. In contrast, the majority of QTLs for hot-water extract were not coincident with those identified for other malt quality traits, which suggested differences in the mechanism controlling this trait. Novel QTLs have been identified for kernel hardness on chromosomes 2HL and 7HL, hot-water extract on 7HL and wort β-glucan on 6HL, and the resulting markers may be useful for marker-assisted selection in breeding programs.     

Quantitative trait loci for salinity tolerance in barley (Hordeum vulgare L.)

Salinity stress is a major limitation in barley production. Substantial genetic variation in tolerance occurs among genotypes of barley, so the development of salt-tolerant cultivars is a potentially effective approach for minimizing yield losses. The lack of economically viable methods for screening salinity tolerance in the field remains an obstacle to breeders, and molecular marker-assisted selection is a promising alternative. In this study, salinity tolerance of 172 doubled-haploid lines generated from YYXT (salinity-tolerant) and Franklin (salinity-sensitive) was assessed in glasshouse trials during the vegetative phase. A high-density genetic linkage map was constructed from 76 pairs of simple sequence repeats and 782 Diversity Arrays Technology markers which spanned a total of 1,147 cM. Five significant quantitative trait loci (QTL) for salinity tolerance were identified on chromosomes 1H, 2H, 5H, 6H and 7H, accounting for more than 50% of the phenotypic variation. The tolerant variety, YYXT, contributed the tolerance to four of these QTL and Franklin contributed the tolerance to one QTL on chromosome 1H. Some of these QTL mapped to genomic regions previously associated with salt tolerance in barley and other cereals. Markers associated with the major QTL identified in this study have potential application for marker-assisted selection in breeding for enhanced salt tolerance in barley.     

Quantitative trait loci (QTLs) for water use and crop production traits co-locate with major QTL for tolerance to water deficit in a fine-mapping population of pearl millet (<Emphasis Type="Italic">Pennisetum glaucum</Emphasis> L. R.Br.)

Key message

Four genetic regions associated with water use traits, measured at different levels of plant organization, and with agronomic traits were identified within a previously reported region for terminal water deficit adaptation on linkage group 2. Close linkages between these traits showed the value of phenotyping both for agronomic and secondary traits to better understand plant productive processes.

Abstract

Water saving traits are critical for water stress adaptation of pearl millet, whereas maximizing water use is key to the absence of stress. This research aimed at demonstrating the close relationship between traits measured at different levels of plant organization, some putatively involved in water stress adaptation, and those responsible for agronomic performance. A fine-mapping population of pearl millet, segregating for a previously identified quantitative trait locus (QTL) for adaptation to terminal drought stress on LG02, was phenotyped for traits at different levels of plant organization in different experimental environments (pot culture, high-throughput phenotyping platform, lysimeters, and field). The linkages among traits across the experimental systems were analysed using principal component analysis and QTL co-localization approach. Four regions within the LG02-QTL were found and revealed substantial co-mapping of water use and agronomic traits. These regions, identified across experimental systems, provided genetic evidence of the tight linkages between traits phenotyped at a lower level of plant organization and agronomic traits assessed in the field, therefore deepening our understanding of complex traits and then benefiting both geneticists and breeders. In short: (1) under no/mild stress conditions, increasing biomass and tiller production increased water use and eventually yield; (2) under severe stress conditions, water savings at vegetative stage, from lower plant vigour and fewer tillers in that population, led to more water available during grain filling, expression of stay-green phenotypes, and higher yield.

     

QTL affecting stress response to crowding in a rainbow trout broodstock population

Background

Genomic analyses have the potential to impact selective breeding programs by identifying markers that serve as proxies for traits which are expensive or difficult to measure. Also, identifying genes affecting traits of interest enhances our understanding of their underlying biochemical pathways. To this end we conducted genome scans of seven rainbow trout families from a single broodstock population to identify quantitative trait loci (QTL) having an effect on stress response to crowding as measured by plasma cortisol concentration. Our goal was to estimate the number of major genes having large effects on this trait in our broodstock population through the identification of QTL.

Results

A genome scan including 380 microsatellite markers representing 29 chromosomes resulted in the de novo construction of genetic maps which were in good agreement with the NCCCWA genetic map. Unique sets of QTL were detected for two traits which were defined after observing a low correlation between repeated measurements of plasma cortisol concentration in response to stress. A highly significant QTL was detected in three independent analyses on Omy16, many additional suggestive and significant QTL were also identified. With linkage-based methods of QTL analysis such as half-sib regression interval mapping and a variance component method, we determined that the significant and suggestive QTL explain about 40-43% and 13-27% of the phenotypic trait variation, respectively.

Conclusions

The cortisol response to crowding stress is a complex trait controlled in a sub-sample of our broodstock population by multiple QTL on at least 8 chromosomes. These QTL are largely different from others previously identified for a similar trait, documenting that population specific genetic variants independently affect cortisol response in ways that may result in different impacts on growth. Also, mapping QTL for multiple traits associated with stress response detected trait specific QTL which indicate the significance of the first plasma cortisol measurement in defining the trait. Fine mapping these QTL can lead towards the identification of genes affecting stress response and may influence approaches to selection for this economically important stress response trait.

     

Malting quality quantitative trait loci on a high-density map of Mikamo golden?×?Harrington cross in barley (Hordeum vulgare L.)

A high-density map consisting of 550 markers was constructed based on the segregation data of 95 doubled-haploid lines (DHLs) derived from the cross between a Japanese barley cultivar, Mikamo Golden and a North American barley cultivar, Harrington (MH-DHLs). Quality traits of malt extract (EX), total nitrogen (TN), soluble nitrogen (SN), Kolbach index (KI), diastatic power (DP), wort beta-glucan (WG) and viscosity (VS) were determined in three site/year crops. Quantitative trait loci (QTL) analyses were performed with these quality data sets, using the linkage map. Major QTL controlling EX, SN and KI were mapped on terminal region of 5H with Harrington as effective allele. Another QTL controlling EX was mapped on 2H with Mikamo Golden as effective allele. QTL controlling TN, DP, WG and VS were detected variably in terms of flanking markers and chromosomes depending on site/year. Cleaved amplified polymorphic sequences (CAPS) markers for EX based on the QTL detected on 2H and 5H were developed. Analysis of EX and genotypes of 33 malting barley cultivars from around the world as well as MH-DHLs revealed that the two CAPS marker on 2H and 5H affect EX by a significant difference, suggesting that the two CAPS markers were valuable for marker-assisted selection in malting barley breeding.     

Using QTL mapping to investigate the relationships between abiotic stress tolerance (drought and salinity) and agronomic and physiological traits

Background

Drought and salinity are two major abiotic stresses that severely limit barley production worldwide. Physiological and genetic complexity of these tolerance traits has significantly slowed the progress of developing stress-tolerant cultivars. Marker-assisted selection (MAS) may potentially overcome this problem. In the current research, seventy two double haploid (DH) lines from a cross between TX9425 (a Chinese landrace variety with superior drought and salinity tolerance) and a sensitive variety, Franklin were used to identify quantitative trait loci (QTL) for drought and salinity tolerance, based on a range of developmental and physiological traits.

Results

Two QTL for drought tolerance (leaf wilting under drought stress) and one QTL for salinity tolerance (plant survival under salt stress) were identified from this population. The QTL on 2H for drought tolerance determined 42% of phenotypic variation, based on three independent experiments. This QTL was closely linked with a gene controlling ear emergency. The QTL on 5H for drought tolerance was less affected by agronomic traits and can be effectively used in breeding programs. A candidate gene for this QTL on 5H was identified based on the draft barley genome sequence. The QTL for proline accumulation, under both drought and salinity stresses, were located on different positions to those for drought and salinity tolerance, indicating no relationship with plant tolerance to either of these stresses.

Conclusions

Using QTL mapping, the relationships between QTL for agronomic and physiological traits and plant drought and salinity tolerance were studied. A new QTL for drought tolerance which was not linked to any of the studied traits was identified. This QTL can be effectively used in breeding programs. It was also shown that proline accumulation under stresses was not necessarily linked with drought or salinity tolerance based on methods of phenotyping used in this experiment. The use of proline content in breeding programs can also be limited by the accuracy of phenotyping.

Electronic supplementary material

The online version of this article (doi:10.1186/s12864-015-1243-8) contains supplementary material, which is available to authorized users.     

Genetic architecture of quantitative trait loci associated with morphological and agronomic trait differences in a wild by cultivated barley cross.

Hordeum vulgare subsp. spontaneum is the progenitor of cultivated barley (Hordeum vulgare L.). Domestication combined with plant breeding has led to the morphological and agronomic characteristics of modern barley cultivars. The objective of this study was to map the genetic factors that morphologically and agronomically differentiate wild barley from modern barley cultivars. To address this objective, we identified quantitative trait loci (QTLs) associated with plant height, flag leaf width, spike length, spike width, glume length in relation to seed length, awn length, fragility of ear rachis, endosperm width and groove depth, heading date, flag leaf length, number of tillers per plant, and kernel color in a Harrington/OUH602 advanced backcross (BC2F8) population. This population was genotyped with 113 simple sequence repeat markers. Thirty QTLs were identified, of which 16 were newly identified in this study. One to 4 QTLs were identified for each of the traits except glume length, for which no QTL was detected. The portion of phenotypic variation accounted for by individual QTLs ranged from about 9% to 54%. For traits with more than one QTL, the phenotypic variation explained ranged from 25% to 71%. Taken together, our results reveal the genetic architecture of morphological and agronomic traits that differentiate wild from cultivated barley.