Modulating the binding properties of an anti-17beta-estradiol antibody by systematic mutation combinations

The anti-17beta-estradiol antibody 57-2 has been a subject for several protein engineering studies that have produced a number of mutants with improved binding properties. Here, we generated a set of 16 antibody 57-2 variants by systematically combining mutations previously identified from phage display-derived improved antibody mutants. These mutations included three point mutations in the variable domain of the light-chain and a heavy-chain variant containing a four-residue random insertion in complementarity determining region CDR-H2. The antibody variants were expressed as Fab fragments, and they were characterized for affinity toward estradiol, for cross-reactivity toward three related steroids, and for dissociation rate of the Fab/estradiol complex by using time-resolved fluorescence based immunoassays. The double-mutant cycle method was used to address the cooperativity effects between the mutations. The experimental data were correlated with structural information by using molecular modeling and visual analysis of the previously solved antibody 57-2 crystal structures. These analyses provided information about the steroid-binding mode of the antibody, the potential mechanisms of individual mutations, and their mutual interactions. Furthermore, several combinatorial mutants with improved affinity and specificity were obtained. The capacity of one of these mutants to detect estradiol concentrations at a clinically relevant range was proved by establishing a time-resolved fluorescence based immunoassay.     

The CDR1 of the human lambdaVI light chains adopts a new canonical structure

We performed a comparative analysis of the conformation of the CDR1 of the human lambdaVI variable domains JTO and WIL and the equivalent loop of the lambdaI light chains RHE and KOL, which are representative of the type I canonical structure for lambda light chains. On the basis of the differences found in the main chain conformation, as well as the identity of the residues at key positions, we showed that the L1 of some lambdaVI light chains adopts a conformation that represents a new type of canonical structure. The conformation of the L1 of those lambdaVI light chains, is primarily determined by the presence of an Arg residue at position 25. The analysis of the lambdaVI light chain sequences so far reported, showed that near 25% of those proteins have Gly at position 25 instead of Arg, which represents an allotypic variant of the lambdaVI variable locus. The presence of Gly at position 25 in the L1 of lambdaVI light chains would imply a different conformation for this loop. Additionally, the position 68 in lambdaVI light chains, which is at the top of the FR3 loop, showed such spatial orientation and variability that suggested its participation in the conformation of the antigen recognition surface in this subgroup of lambda chains.     

Interaction between the antigen and antibody is controlled by the constant domains: normal mode dynamics of the HEL-HyHEL-10 complex

The antigen binding fragment (Fab) of a monoclonal antibody (HyHEL-10) consists of variable domains (Fv) and constant domains (CL-CH1). Normal modes have been calculated from the three-dimensional structures of hen egg lysozyme (HEL) with Fab, those of HEL with Fv, and so on. Only a small structural change was found between HEL-Fab and HEL-Fv complexes. However, HEL-Fv had a one order of magnitude lower dissociation constant than HEL-Fab. The Calpha fluctuations of HEL-Fab differed from those of HEL-Fv with normal mode calculation, and the dynamics can be thought to be related to the protein-protein interactions. CL-CH1 may have influence not only around local interfaces between CL-CH1 and Fv, but also around the interacting regions between HEL and Fv, which are longitudinally distant. Eighteen water molecules were found in HEL-Fv around the interface between HEL and Fv compared with one water molecule in HEL-Fab. These solvent molecules may occupy the holes and channels, which may occur due to imperfect complementarity of the complex. Therefore, the suppression of atomic vibration around the interface between Fv and HEL can be thought to be related to favorable and compact interface formation by complete desolvation. It is suggested that the ability to control the antigen-antibody affinity is obtained from modifying the CL-CH1. The second upper loop in the constant domain of the light chain (UL2-CL), which is a conserved gene in several light chains, showed the most remarkable fluctuation changes. UL2-CL could play an important role and could be attractive for modification in protein engineering.     

An anti-hapten camelid antibody reveals a cryptic binding site with significant energetic contributions from a nonhypervariable loop

Conventional anti-hapten antibodies typically bind low-molecular weight compounds (haptens) in the crevice between the variable heavy and light chains. Conversely, heavy chain-only camelid antibodies, which lack a light chain, must rely entirely on a single variable domain to recognize haptens. While several anti-hapten VHHs have been generated, little is known regarding the underlying structural and thermodynamic basis for hapten recognition. Here, an anti-methotrexate VHH (anti-MTX VHH) was generated using grafting methods whereby the three complementarity determining regions (CDRs) were inserted onto an existing VHH framework. Thermodynamic analysis of the anti-MTX VHH CDR1-3 Graft revealed a micromolar binding affinity, while the crystal structure of the complex revealed a somewhat surprising noncanonical binding site which involved MTX tunneling under the CDR1 loop. Due to the close proximity of MTX to CDR4, a nonhypervariable loop, the CDR4 loop sequence was subsequently introduced into the CDR1-3 graft, which resulted in a dramatic 1000-fold increase in the binding affinity. Crystal structure analysis of both the free and complex anti-MTX CDR1-4 graft revealed CDR4 plays a significant role in both intermolecular contacts and binding site conformation that appear to contribute toward high affinity binding. Additionally, the anti-MTX VHH possessed relatively high specificity for MTX over closely related compounds aminopterin and folate, demonstrating that VHH domains are capable of binding low-molecular weight ligands with high affinity and specificity, despite their reduced interface.     

Modified antigen-binding of human antibodies with glycosylation variations of the light chains produced in sugar-limited human hybridoma cultures

Summary We have characterized the effects of serum andN-acetylglucosamine in a glucose-deprived condition on the glycosylation of antibody light chains, as well as the resulting biological properties of those antibodies. We have chosen for our investigation the human hybridoma lines producing monoclonal antibodies reactive to lung adenocarcinoma. Each antibody possess aN-glycosylated carbohydrate chain in the hypervariable region of the light chains. When the cell lines were grown in the absence of glucose, variant light chains with varying molecular masses were found to be secreted. Analysis of these light chains produced in a glucose-deprived condition revealed that the changed molecular-mass of the variant light chains is due to different glycosylation. Addition ofN-acetylglucosamine or fetal calf serum to the glucose-free medium led to the creation of other light chains that exhibit increased antigen binding activity.     

Engineered fibronectin type III domain with a RGDWXE sequence binds with enhanced affinity and specificity to human alphavbeta3 integrin

Fibronectin is an extracellular matrix protein with broad binding specificity to cell surface receptors, integrins. The tenth fibronectin type III domain (FNfn10) is a small, autonomous domain of fibronectin containing the RGE sequence that is directly involved in integrin binding. However, in isolation FNfn10 only weakly bind to integrins. We reasoned that high-affinity and high-specificity variants of FNfn10 to a particular integrin could be engineered by optimizing residues surrounding the integrin-binding RGD sequence in the flexible FG loop. Affinity maturation of FNfn10 to alphavbeta3 integrin, an integrin up-regulated in angiogenic endothelial cells and in some metastatic tumor cells, yielded alphavbeta3-binding FNfn10 mutants with a novel RGDWXE consensus sequence. We characterized one of the RGDWXE-modified clones, FNfn10-3JCLI4, as purified protein. FNfn10-3JCLI4 binds with high affinity and specificity to purified alphavbeta3 integrin. Alanine scanning mutagenesis suggested that both the tryptophan and glutamic acid residues following the RGD sequence are required for maximal affinity and specificity for alphavbeta3. FNfn10-3JCLI4 specifically stained alphavbeta3-positive cells as detected with flow cytometry and it inhibited alphavbeta3-dependent cell adhesion. As with the anti-alphavbeta3 antibody LM609, FNfn10-3JCLI4 can interfere with in vitro capillary formation. Taken together, these data show that FNfn10-3JCL14 is a specific, high-affinity alphavbeta3-binding protein that can inhibit alphavbeta3-dependent cellular processes similar to an anti-alphavbeta3 monoclonal antibody. These properties, combined with the small, monomeric, cysteine-free and highly stable structure of FNfn10-3JCLI4, may make this protein useful in future applications involving detection and targeting of alphavbeta3-positive cells.     

Function blocking antibodies to neuropilin-1 generated from a designed human synthetic antibody phage library

Non-immune (na?ve) antibody phage libraries have become an important source of human antibodies. The synthetic phage antibody library described here utilizes a single human framework with a template containing human consensus complementarity-determining regions (CDRs). Diversity of the libraries was introduced at select CDR positions using tailored degenerate and trinucleotide codons that mimic natural human antibodies. Neuropilin-1 (NRP1), a cell-surface receptor for both vascular endothelial growth factor (VEGF) and class 3 semaphorins, is expressed on endothelial cells and neurons. NRP1 is required for vascular development and is expressed widely in the developing vasculature. To investigate the possibility of function blocking antibodies to NRP1 as potential therapeutics, and study the consequence of targeting NRP1 in murine tumor models, panels of antibodies that cross-react with human and murine NRP1 were generated from a designed antibody phage library. Antibody (YW64.3) binds to the CUB domains (a1a2) of NRP1 and completely blocks Sema3A induced neuron collapse; antibody (YW107.4.87) binds to the coagulation factor V/VIII domains (b1b2) of NRP1 and blocks VEGF binding and VEGF induced cell migration. YW107.4.87 inhibits tumor growth in animal xenograft models. These antibodies have provided valuable tools to study the roles of NRP1 in vascular and tumor biology.     

Immunochemical Features of Complementarity Determining Region (CDR) Peptide in Anti Hemin Monoclonal Antibody

Messenger RNA purified from the anti hemin monoclonal antibody (1D3) secreting hybridoma was amplified by RT‐PCR and the nueleotide and amino acid sequences of the antibody were determined. The role of complementarity determining regions (CDRs) in porphyrin recognition and its immunochemical feature of the antibody were investigated by using ELISA, fluorescence measurement and computational calculation of the conformation. All CDR peptides of the heavy chain of the antibody were synthesized and their affinity constants to porphyrins were determined. The value of CDR2 of heavy chain (CDRH2) of 1D3 was 1.5×10⁵/M for protoporphyrin and 7×10⁷/M for TCPP, respectively, while that of the whole antibody showed to be 1.2×10⁷/M for TCPP. Though CDRH2 is a 17 meric peptide, it showed higher affinity than the whole antibody (1D3). Porphyrins can be considered to firmly bind with CDRH2, while CDRH3 is not involved in the antigen binding. CDR‐1 may participate in the recognition with a small contribution. By the computational analysis of steric conformation, it was suggested that CDRH1 and CDRH2 co‐operatively function in the recognition of porphyrin. Copyright © 1999 European Peptide Society and John Wiley & Sons, Ltd.     

A new human catalytic antibody Se‐scFv‐2D8 and its selenium‐containing single domains with high GPX activity

Glutathione peroxidase (GPX) is a well‐known antioxidant selenoenzyme, which can catalyze the reduction of a variety of hydroperoxides and consequently protect cells and other biological tissues against oxidative damage. Many attempts have been made to mimic its function, and a human catalytic antibody Se‐scFv‐B3 with GPX activity has been prepared in our previous study. This time, a new clone 2D8 that bound specifically to the glutathione analog GSH‐S‐DNPBu was selected again by using the technology of phage display antibody library, and then scFv‐2D8 was successfully expressed in soluble form and purified using Ni²⁺‐immobilized metal affinity chromatography. After being converted into selenium‐containing scFv by chemically modification, it showed higher GPX activity than previous abzyme Se‐scFv‐B3. The heavy chain variable fragment of scFv‐2D8 was also prepared and converted into selenium‐containing protein using the same method. This selenium‐containing single‐domain antibody showed some GPX activity and, to the best of our knowledge, is the first human single‐domain abzyme with GPX activity, which lays a foundation for preparing GPX abzyme with human origin, lower molecular weight and higher activity. Copyright © 2009 John Wiley & Sons, Ltd.     

Functional intracellular antibody fragments do not require invariant intra-domain disulfide bonds

Intracellular antibody fragments that interfere with molecular interactions inside cells are valuable in investigation of interactomes and in therapeutics, but their application demands that they function in the reducing cellular milieu. We show here a 2.7-Å crystal structure of intracellular antibody folds based on scaffolds developed from intracellular antibody capture technology, and we reveal that there is no structural or functional difference with or without the intra-domain disulfide bond of the variable domain of heavy chain or the variable domain of light chain. The data indicate that, in the reducing in vivo environment, the absence of the intra-domain disulfide bond is not an impediment to correction of antibody folding or to interaction with antigen. Thus, the structural constraints for in-cell function are intrinsic to variable single-domain framework sequences, providing a generic scaffold for isolation of functional intracellular antibody single domains.     

Crystal structure of HEL4, a soluble, refoldable human V(H) single domain with a germ-line scaffold

The antigen binding site of antibodies usually comprises associated heavy (V(H)) and light (V(L)) chain variable domains, but in camels and llamas, the binding site frequently comprises the heavy chain variable domain only (referred to as V(HH)). In contrast to reported human V(H) domains, V(HH) domains are well expressed from bacteria and yeast, are readily purified in soluble form and refold reversibly after heat-denaturation. These desirable properties have been attributed to highly conserved substitutions of the hydrophobic residues of V(H) domains, which normally interact with complementary V(L) domains. Here, we describe the discovery and characterisation of an isolated human V(H) domain (HEL4) with properties similar to those of V(HH) domains. HEL4 is highly soluble at concentrations of > or =3 mM, essentially monomeric and resistant to aggregation upon thermodenaturation at concentrations as high as 56 microM. However, in contrast to V(HH) domains, the hydrophobic framework residues of the V(H):V(L) interface are maintained and the only sequence changes from the corresponding human germ-line segment (V3-23/DP-47) are located in the loops comprising the complementarity determining regions (CDRs). The crystallographic structure of HEL4 reveals an unusual feature; the side-chain of a framework residue (Trp47) is flipped into a cavity formed by Gly35 of CDR1, thereby increasing the hydrophilicity of the V(H):V(L) interface. To evaluate the specific contribution of Gly35 to domain properties, Gly35 was introduced into a V(H) domain with poor solution properties. This greatly enhanced the recovery of the mutant from a gel filtration matrix, but had little effect on its ability to refold reversibly after heat denaturation. Our results confirm the importance of a hydrophilic V(H):V(L) interface for purification of isolated V(H) domains, and constitute a step towards the design of isolated human V(H) domains with practical properties for immunotherapy.     

Affinity maturation of a novel antagonistic human monoclonal antibody with a long VH CDR3 targeting the Class A GPCR formyl-peptide receptor 1

Therapeutic monoclonal antibodies targeting G-protein-coupled receptors (GPCRs) are desirable for intervention in a wide range of disease processes. The discovery of such antibodies is challenging due to a lack of stability of many GPCRs as purified proteins. We describe here the generation of Fpro0165, a human anti-formyl peptide receptor 1 (FPR1) antibody generated by variable domain engineering of an antibody derived by immunization of transgenic mice expressing human variable region genes. Antibody isolation and subsequent engineering of affinity, potency and species cross-reactivity using phage display were achieved using FPR1 expressed on HEK cells for immunization and selection, along with calcium release cellular assays for antibody screening. Fpro0165 shows full neutralization of formyl peptide-mediated activation of primary human neutrophils. A crystal structure of the Fpro0165 Fab shows a long, protruding V_H CDR3 of 24 amino acids and in silico docking with a homology model of FPR1 suggests that this long V_H CDR3 is critical to the predicted binding mode of the antibody. Antibody mutation studies identify the apex of the long V_H CDR3 as key to mediating the species cross-reactivity profile of the antibody. This study illustrates an approach for antibody discovery and affinity engineering to typically intractable membrane proteins such as GPCRs.     

Construction of a large phage-displayed human antibody domain library with a scaffold based on a newly identified highly soluble, stable heavy chain variable domain

Currently, almost all U.S. Food and Drug Administration-approved therapeutic antibodies and the vast majority of those in clinical trials are full-size antibodies mostly in an immunoglobulin G1 format of about 150 kDa in size. Two fundamental problems for such large molecules are their poor penetration into tissues (e.g., solid tumors) and poor or absent binding to regions on the surface of some molecules [e.g., on the human immunodeficiency virus envelope glycoprotein (Env)] that are accessible by molecules of smaller size. We have identified a phage-displayed heavy chain-only antibody by panning of a large (size, ∼ 1.5 × 10¹⁰) human naive Fab (antigen-binding fragment) library against an Env and found that the heavy chain variable domain (V_H) of this antibody, designated as m0, was independently folded, stable, highly soluble, monomeric, and expressed at high levels in bacteria. m0 was used as a scaffold to construct a large (size, ∼ 2.5 × 10¹⁰), highly diversified phage-displayed human V_H library by grafting naturally occurring complementarity-determining regions (CDRs) 2 and 3 of heavy chains from five human antibody Fab libraries and by randomly mutating four putative solvent-accessible residues in CDR1 to A, D, S, or Y. The sequence diversity of all CDRs was determined from 143 randomly selected clones. Most of these V_Hs were with different CDR2 origins (six of seven groups of V_H germlines) or CDR3 lengths (ranging from 7 to 24 residues) and could be purified directly from the soluble fraction of the Escherichia coli periplasm. The quality of the library was also validated by successful selection of high-affinity V_Hs against viral and cancer-related antigens; all selected V_Hs were monomeric, easily expressed, and purified with high solubility and yield. This library could be a valuable source of antibodies targeting size-restricted epitopes and antigens in obstructed locations where efficient penetration could be critical for successful treatment.     

Therapeutic antibody engineering by high efficiency cell screening

In recent years, several cell-based screening technologies for the isolation of antibodies with prescribed properties emerged. They rely on the multi-copy display of antibodies or antibody fragments on a cell surface in functional form followed by high through put screening and isolation of cell clones that carry an antibody variant with the desired affinity, specificity, and stability. Particularly yeast surface display in combination with high-throughput fluorescence-activated cell sorting has proven successful in the last fifteen years as a very powerful technology that has some advantages over classical generation of monoclonals using the hybridoma technology or bacteriophage-based antibody display and screening. Cell-based screening harbours the benefit of single-cell online and real-time analysis and characterisation of individual library candidates. Moreover, when using eukaryotic expression hosts, intrinsic quality control machineries for proper protein folding and stability exist that allow for co-selection of high-level expression and stability simultaneously to the binding functionality. Recently, promising technologies emerged that directly rely on antibody display on higher eukaryotic cell lines using lentiviral transfection or direct screening on B-cells. The combination of immunisation, B-cell screening and next generation sequencing may open new avenues for the isolation of therapeutic antibodies with prescribed physicochemical and functional characteristics.     

Structural Basis of Epitope Recognition by Heavy-Chain Camelid Antibodies

Truncated versions of heavy-chain antibodies (HCAbs) from camelids, also termed nanobodies, comprise only one-tenth the mass of conventional antibodies, yet retain similar, high binding affinities for the antigens. Here we analyze a large data set of nanobody–antigen crystal structures and investigate how nanobody–antigen recognition compares to the one by conventional antibodies. We find that nanobody paratopes are enriched in aromatic residues just like conventional antibodies, but additionally, they also bear a more hydrophobic character. Most striking differences were observed in the characteristics of the antigen's epitope. Unlike conventional antibodies, nanobodies bind to more rigid, concave, conserved and structured epitopes enriched with aromatic residues. Nanobodies establish fewer interactions with the antigens compared to conventional antibodies, and we speculate that high binding affinities are achieved due to less unfavorable conformational and more favorable solvation entropy contributions. We observed that interactions with antigen are mediated not only by three CDR loops but also by numerous residues from the nanobody framework. These residues are not distributed uniformly; rather, they are concentrated into four structurally distinct regions and mediate mostly charged interactions. Our findings suggest that in some respects nanobody–antigen interactions are more similar to the general protein–protein interactions rather than antibody–antigen interactions.     

The human combinatorial antibody library HuCAL GOLD combines diversification of all six CDRs according to the natural immune system with a novel display method for efficient selection of high-affinity antibodies

This article describes the generation of the Human Combinatorial Antibody Library HuCAL GOLD. HuCAL GOLD is a synthetic human Fab library based on the HuCAL concept with all six complementarity-determining regions (CDRs) diversified according to the sequence and length variability of naturally rearranged human antibodies. The human antibody repertoire was analyzed in-depth, and individual CDR libraries were designed and generated for each CDR and each antibody family. Trinucleotide mixtures were used to synthesize the CDR libraries in order to ensure a high quality within HuCAL GOLD, and a β-lactamase selection system was employed to eliminate frame-shifted clones after successive cloning of the CDR libraries. With these methods, a large, high-quality library with more than 10 billion functional Fab fragments was achieved. By using CysDisplay, the antibody fragments are displayed on the tip of the phage via a disulfide bridge between the phage coat protein pIII and the heavy chain of the antibody fragment. Efficient elution of specific phages is possible by adding reducing agents. HuCAL GOLD was challenged with a variety of different antigens and proved to be a reliable source of high-affinity human antibodies with best affinities in the picomolar range, thus functioning as an excellent source of antibodies for research, diagnostic, and therapeutic applications. Furthermore, the data presented in this article demonstrate that CysDisplay is a robust and broadly applicable display technology even for high-throughput applications.     

Modulation of in vivo IgG crystallization in the secretory pathway by heavy chain isotype class switching and N-linked glycosylation

Crystalline bodies (CBs) can develop in the endoplasmic reticulum (ER) of antibody-producing cells. Although this phenotype is often reported in association with plasma cell dyscrasias and other hematological disorders, the details of CB biogenesis and CB's roles in pathophysiology remain poorly understood. Using an imaging-based screening method, we identified a secretion-competent human IgG2/λ clone that develops spindle-shaped intracellular crystals in transiently-transfected HEK293 cells upon Brefeldin A treatment. When stably overexpressed from CHO cells, the IgG2/λ clone spontaneously produced spindle-shaped CBs in the ER. Some CBs were released to the extracellular space while remaining enclosed by the membranes of secretory pathway origin. Structural modeling on the variable-region did not uncover prominent surface characteristics such as charge clusters. In contrast, alterations to the constant domain-encoded properties revealed their modulatory roles in CB-inducing propensities and CB morphology. For example, deletion of the entire Fc domain changed the morphology of CBs into thin filaments. Elimination of an N-linked glycan by a N297A mutation promoted Russell body biogenesis accompanied by marked reduction in IgG secretion. Isotype class switching from the original IgG2 to IgG1 and IgG4 changed the crystal morphology from spindle-shaped to long needle and acicular shaped, respectively. The IgG3 version, in contrast, suppressed the CB formation. Either the HC or LC alone or the Fc-domain alone did not trigger CB biogenesis. An IgG's in vivo crystal morphology and crystallization propensity can thus be modulated by the properties genetically and biochemically encoded in the HC constant region.     

The Global Sequence Signature algorithm unveils a structural network surrounding heavy chain CDR3 loop in Camelidae variable domains

Background

A large fraction of camelid (camels and llamas) antibodies is composed of heavy chain-only homodimers, able to recognise antigens with their variable domain. Events in somatic assembly and maturation of antibodies such as hypermutations and rearrangement of variable loops (CDRs — complementary determining regions) and selection among a wide range of framework variants are generally considered to be random processes.

Methods

An original algorithmic approach (Global Sequence Signature—GSS) was developed, able to take into account multiple functional and/or local sequence properties to detect scattered evolutionary constraints into sequences.

Results

Using the GSS approach, we show that the length of the main hypervariable loop (CDR3) is linked to the nature of 19 surrounding residues on the scaffold. Surprisingly, the relation between CDR3 size and scaffold residues strongly depends on the considered species, illustrating either significant differences in selection mechanisms or functional constraints during antibody maturation.

Conclusions

Combined with the statistical coupling analysis (SCA) approach at the level of scaffold residues, this study has unravelled a robust interaction network on antibody structure surrounding the CDR3 loop.

General significance

In addition to the general applicability of the GSS algorithm, which can bring together functional and sequence data to locate hot spots of constrained evolution, the relationship between CDR3 and scaffold discussed here should be taken into account in protein engineering when designing antibody libraries.     

Structural Basis of Enhanced Crystallizability Induced by a Molecular Chaperone for Antibody Antigen-Binding Fragments

Monoclonal antibodies constitute one of the largest groups of drugs to treat cancers and immune disorders, and are guiding the design of vaccines against infectious diseases. Fragments antigen-binding (Fabs) have been preferred over monoclonal antibodies for the structural characterization of antibody–antigen complexes due to their relatively low flexibility. Nonetheless, Fabs often remain challenging to crystallize because of the surface characteristics of complementary determining regions and the residual flexibility in the hinge region between the variable and constant domains. Here, we used a variable heavy-chain (V_HH) domain specific for the human kappa light chain to assist in the structure determination of three therapeutic Fabs that were recalcitrant to crystallization on their own. We show that this ligand alters the surface properties of the antibody–ligand complex and lowers its aggregation temperature to favor crystallization. The V_HH crystallization chaperone also restricts the flexible hinge of Fabs to a narrow range of angles, and so independently of the variable region. Our findings contribute a valuable approach to antibody structure determination and provide biophysical insight into the principles that govern the crystallization of macromolecules.