木质层孔菌原生质体的制备与再生条件的研究

目的：提高木质层孔菌原生质体的产量和再生率,为进一步诱变育种提高菌株产木质纤维素酶活力打下基础。方法：通过单因素实验分别筛选合适的酶浓度、菌丝的菌龄、酶解温度、酶解时间、渗透压稳定剂与pH值。结果：在酶解液浓度为2.0%纤维素酶＋2.0%蜗牛酶、菌龄60h、酶解温度32℃、酶解时间3h,以0.8mol/L的NaCl溶液为渗透压稳定剂,pH值为5.0时,原生质体形成量达4.13×10^5个/mL,再生率可达6.95%。有效地提高了木质层孔菌原生质体的产量和再生率。     

茯苓原生质体制备与再生条件的研究

研究了酶、酶解时间、菌龄、稳渗剂等对茯苓原生质体制备与再生的影响。茯苓原生质体制备的最佳条件为:纤维素酶(1．5%)和蜗牛酶(1．5%)的等量混合酶解系统,酶解时间3h,7d菌龄菌丝,产量可达1．77×10~7个/mL。以甘露醇为稳渗剂,采用CYM再生培养基,酶解时间3h,7d菌龄菌丝,其原生质体再生率最高,为0．164%。这一结果为茯苓通过原生质体技术进行菌种改良提供了重要技术参数。     

赤芝原生质体分离与再生研究

以赤芝(Ganoderma lucidum)为供试菌种,研究了不同酶解温度、酶解时间、渗透压稳定剂浓度及菌龄、再生培养基等对赤芝菌丝的原生质体制备与再生的影响。结果表明:菌龄为4 d的菌丝,以0.4 mol/m L的甘露醇作渗透压稳定剂配制成浓度为0.02 g/m L的溶壁酶,于p H 5.0、25℃条件下酶解2.0 h,其原生质体数最高可达3.87×107/m L,MYG再生培养基上再生率达到0.016%。     

生防木霉菌原生质体的制备及再生研究

ACCC 30150是由本实验室筛选的一株对黄瓜枯萎病、青椒疫病等多种土传病害具有较好防治效果的生防木霉菌.为了建立该生防木霉菌的CaCl2/PEG转化体系,对其原生质体制备及再生条件进行了摸索.结果表明,以0.6 M NaCl作为渗透压稳定剂,用PDA平板上培养36 h的微小菌丝接种液体菌丝培养基,菌龄16 h,用20 mg/ml的纤维素酶和蜗牛酶以1:1的比例混合,按照菌丝重量(g):酶液体积(ml)=1:20的比例,36℃酶解2 h原生质体产量最高.同时,酶解2 h,以CMR1为再生培养基原生质体的再生率最高.     

疏绵状嗜热丝孢菌原生质体的制备与再生

以疏绵状嗜热丝孢菌(Thermomyces lanuginosus)为供试菌株,研究了菌龄、酶的种类及浓度、酶解时间、酶解温度和稳渗剂对原生质体制备的影响及稳渗剂对原生质体再生的影响。结果表明,制备嗜热丝孢菌原生质体比较适宜的条件为:PDB液体培养基培养28 h,以0.7 mol/L NaCl为稳渗剂,0.15 mol/L的溶壁酶,30℃酶解4 h。原生质体再生以0.7 mol/L蔗糖作稳渗剂为最佳。     

姬松茸原生质体形成和再生的研究

报道了溶壁酶系统、酶浓度、不同菌龄、脱壁促进剂、渗透压稳定剂和酶解温度对姬松茸原生质体释放率及不同再生培养基、渗稳剂种类、菌丝酶解时间和单双层平板对原生质体再生的影响。结果表明 ,菌龄为3～ 5d的菌丝以 1.5 %溶壁酶、0 .5 %蜗牛酶和 0 .5 %纤维素酶组成的酶系统在 30℃以KCl为渗透压稳定剂时 ,形成率为 1.4～ 1.5ⅹ 10 7/mL酶液 ;以蔗糖为渗透压稳定剂 ,菌丝酶解 1.5～ 3h ,以SMY和MYP为再生培养基 ,姬松茸原生质体再生率为 1.1‰～ 1.3‰。     

茶树菇原生质体再生及单核体菌株的特性

【背景】茶树菇遗传育种工作是茶树菇产业持续发展的保障和关键,原生质体的制备及单核体菌株的获得可为茶树菇遗传育种工作的开展提供技术支持。【目的】获得茶树菇原生质体的再生特性、单核化特性及其交配型,为开展茶树菇的杂交育种、融合育种、诱变育种、遗传转化和功能基因挖掘等奠定基础。【方法】以茶树菇保藏菌种Aa11的菌丝为材料,采用甘露醇溶液和溶壁酶溶液直接处理平板菌丝制备茶树菇原生质体,而后对原生质体进行分离和再生培养。通过原生质体单核菌丝体两两单单对峙培养,观察对峙培养过程中的菌落形态变化。【结果】当接种块数量为7、酶解温度为33-34℃、酶解时间为60-80 min时,原生质体数量为107个/mL。茶树菇原生质体在涂布平板7 d后肉眼才可见明显的再生菌落形成,在再生培养基上再生率为0.71%,单核化率为41.1%;再生异核体和再生单核体在形成再生菌落时有时间差,从第7天开始往后连续3 d的再生菌落均为异核体菌株,往后第4天开始陆续出现单核体菌落,之后时间内的菌落均为单核体菌株。试验共得到290个原生质体单核体,分为A1B1和A2B2两种亲本交配型,A1B1和A2B2二者的比例为138:152...     

金针菇褐化病毒(FvBV)脱毒方法

【目的】评价5种不同脱毒方法对金针菇(Flammulina velutipes)菌株的脱毒效果,筛选出脱毒率高和脱毒后金针菇菌株菌丝生长速度、生物量、漆酶活力等性状改善明显的脱毒方法。【方法】以栽培金针菇菌株F-4889为研究材料,从菌丝体中提取大小约2.0 kb的病毒dsRNA,经RT-PCR鉴定该病毒为金针菇褐化病毒(FvBV)。采用菌丝尖端分离、原基组织分离、原生质体单核化、有性生殖和核迁移5种脱毒方法对金针菇菌株进行脱毒处理,利用dsRNA技术和RT-PCR检测脱毒效果。【结果】菌丝尖端分离脱毒后得到1株脱毒菌株;原基组织分离法未能脱毒;原生质体单核化脱毒法得到3株脱毒单核菌株和2株原单杂交脱毒菌株;有性生殖脱毒法获得脱毒孢子单核菌株23株和单孢杂交脱毒菌株8株;核迁移脱毒后得到5株核迁移脱毒菌株。脱毒率依次为25.0%、0、7.5%、57.5%和100%。脱毒菌株的菌丝生长速度、生物量、漆酶活力等均优于出发菌株、菌丝尖端和原基组织分离菌株。【结论】这5种方法中原生质体单核化、有性生殖和核迁移脱毒法脱毒效果较佳,均能有效脱除FvBV,脱毒率高,脱毒后菌株菌丝生长速度、生物量、漆酶活力等均明显提高。     

磷脂酶D高产菌株的原生质体紫外诱变选育

为了获得磷脂酶D高产菌株,由链霉菌野生菌株LD0501出发研究原生质体的制备和再生条件,建立原生质体紫外诱变筛选方案。采用酶解法制备原生质体,用紫外线对原生质体诱变,TLC检测突变株产磷脂酶D活力。原生质体的适宜条件:种子培养基中甘氨酸质量浓度5 g/L,菌龄72 h,用3 mg/m L的溶菌酶在30℃下酶解75min。通过原生质体诱变筛选,得到1株高产菌株,磷脂酶D水解活力达4.29 U/m L,提高幅度为180.4%。该方法有效改善了链霉菌野生菌株原生质体的制备效果,紫外诱变筛选显著提高了磷脂酶D的活力,高产突变株具有较好的稳定性。     

冬虫夏草原生质体形成和再生的初步研究

研究冬虫夏草菌丝体的菌龄、酶种类、酶解温度、酶解时间、pH、稳渗剂和几种再生培养基对原生质体形成和再生的影响。最佳条件为 :生长 6d的菌丝体 ,组合酶 (1%蜗牛酶 +1%纤维素酶 ) ,酶解温度 36℃ ,酶解时间 2 .5h,pH6 .4 ,稳渗剂 0 .4M甘露醇溶液 ,RM3再生培养基。在此条件下原生质体的形成为 2 .0 4× 10 9个 ml,再生率为 0 .0 91%。     

Efficient protoplast regeneration for some homofermentative lactobacilli and pediococci

Conditions for protoplast regeneration were examined for several strains of homofermentative lactobacilli and pediococci isolated from silage. Attempts to regenerate protoplasts using previously published agar regeneration media for lactobacilli were unsuccessful for most of the strains. Replacing or increasing colloidal substances in a medium containing raffinose and MgCl(2) as osmotic stabilizers enabled efficient regeneration of the protoplasts at a frequency of 10-99%. A medium containing gelatin, polyvinylpyrrolidone (PVP) and no agar was effective for Lactobacillus plantarum, Lactobacillus pentosus and Lactobacillus rhamnosus protoplasts. An agar medium containing PVP (PVP medium) was effective for Pediococcus sp. protoplasts, and addition of agarose to the PVP medium enabled regeneration of Lactobacillus casei protoplasts. A medium containing calcium alginate gel and no agar was effective for Lactobacillus curvatus protoplasts. The type of colloidal substance required for protoplast regeneration varied from species to species. This result suggested that several kinds of media may be necessary to regenerate protoplasts for all the genera of lactobacilli and pediococci.     

Mycelial protoplast isolation and regeneration of Lentinus lepideus

Generation of fungal protoplast is essential for fusion and transformation systems. Protoplast fusion offers great potential for the improvement of industrially important microorganisms. To establish conditions for the protoplast isolation and regeneration of the mycelia of Lentinus lepideus, various enzymes and osmotic stabilizers were examined. To investigate suitable medium for the culture of L. lepideus, the mycelia were grown in ten different media at 28 degrees C for 10 days. Among them potato dextrose agar (PDA) medium was found to be the best for colony growth. When Novozym 234, cellulase and beta-glucuronidase were added to the mycelia in combination or alone, Novozym 234 alone at the concentration of 10 mg/ml was the most effective for the protoplast yield. Purified spherical protoplasts of the mycelia were osmotically hypersensitive and further incubation of the mycelia with the lytic enzyme resulted in the older parts of the hyphae swollen. When we applied various osmotic stabilizers at the fixed concentration of 0.6 M on the protoplasts, the yields of protoplasts were increased until 4-hr incubation. However application of sucrose or MgSO4 led to further protection of protoplasts after that time and reached a plateau on 5- and 7-hr incubations, respectively. The suitable incubation time and optimal pH with the lytic enzyme for the maximum release of protoplasts were 6 hrs of incubation and pH 5, respectively. When we examined various osmotic stabilizers for the regeneration of the protoplast, the complete medium containing 0.6 M sucrose induced highest hyphal growth with regeneration frequency of 3.28%.     

The isolation and regenaration of protoblast from Lipomyces starkeyi: an oleaginous yeast

The isolation and regenration of prostoplasts from Lipomyces starkeyi have been optimised. Snail enzyme (12 mg·ml⁻¹) proved to be the most effective lytic enzyme although treatment with Novozym 234, Cellulase CP and β-glucanase also resulted in protoplast formation. Magnesium sulphate (0.55 M) was shown to be the best fro protoplast isolation. Exponential phase cells were most susceptible to the lytic enzyme, stationary phase cells appeared to be resistant. 2-Mercaptoethanol or dithiothreitol did not enahance the isolation of protoplasts in this yeast. The optimum pH for protoplast isolation was 5.8. Ultrastructural observations were made on cells during lytic digestion and revealed that the cell wall and capsule are stripped away from the protoplast.Protoplast synthesised new cell wall material when cultured on osmotically stabilised medium, regeneration was not oberved in liquid medium. Optimum regeneration occured when protoplasts were embedded in a thin layer of minimal medium osmotically stabilised with mannitol (0.6M) and solidified with 1.5–2.0% agar. A basal layer of medium was also stabilised with mannitol (0.6 M) but contained 3% agar. The lytic enzyme used for protoplast isolation did not appear to effect the regeneration of protoplasts.     

Protoplast transformation of recalcitrant alkaliphilic Bacillus sp. with methylated plasmid DNA and a developed hard agar regeneration medium

Among the diverse alkaliphilic Bacillus strains, only a little have been reported to be genetically transformed. In this study, an efficient protoplast transformation procedure was developed for recalcitrant alkaliphilic Bacillus sp. N16-5. The procedure involved polyethylene glycol-induced DNA uptake by the protoplasts and subsequent protoplast regeneration with a developed hard agar regeneration medium. An in vivo methylation strategy was introduced to methylate the exogenous plasmid DNA for improving the transformation efficiency. The transformation efficiency reached to 1.1×10(5) transformants per μg plasmid DNA with methylated plasmid pHCMC04 and the developed hard agar regeneration medium. This procedure might also be applicable to the genetic transformation of other Bacillus strains.     

大球盖菇原生质体再生及单核化特性的研究*

大球盖菇原生质体再生条件及单核化特性结果。原生质体再生速度极快,涂布平板３ｄ后肉眼即可见明显的再生菌落形成,在ＰＧＰＭ再生培养基上再生率为０．９７～２．０％,渗稳剂种类对再生率无明显影响,但可影响再生菌落形态,液体预培养１～２ｄ,再生率明显下降;大球盖菇原生质体单核化率高达７７．６％,且再生双核体和再生单核体在形成再生菌落时无时间差,其生长速度亦无快慢之分,液体预培养可显著减少单核化率,再生单核体中存在亲本两种交配型,但二者的比率不为１。     

Protoplast preparation and polyethylene glycol (PEG)-mediated transformation of <Emphasis Type="Italic">Candida glycerinogenes</Emphasis>

The regeneration of Candida glycerinogenes protoplasts is a major step following genetic manipulations such as fusion and DNA-mediated transformation. An investigation of protoplast formation and cytological examination was used to gain further insight into the loss of protoplast viability in osmotically stabilized support media. Protoplasts with the highest regeneration frequency (98.6% protoplasts/mL) were isolated, using lysozyme dissolved in 1M sorbitol osmoticum. The commercial enzyme preparations, osmotic stabilisers, and growth phase were effective in raising the protoplast yield. Sodium chloride was effective for protoplast preparation; however, sugars and sugar alcohols were better for protoplast regeneration. Sorbitol at a concentration of 1 M was used in regeneration agar for further studies. Regeneration of colonies from protoplasts was maximal (11 ~ 15%) when protoplasts were incorporated in cooled agar containing 0.5% glucose, supplemented with 1M sorbitol as osmotic stabilizer. C. glycerinogenes strain was highly sensitive to zeocin, so transformation of protoplasts and PEG-mediated was achieved with an improved transformation system, using plasmid pURGAP-gfp containing zeocin gene driven by a PCgGAP promoter from C. glycerinogenes to express gfp gene and be transformed into the 5.8S rDNA site of C. glycerinogenes in order to test the system for studying the yeast osmoregulation. We developed an efficient method for transformation of C. glycerinogenes, and parameters involved in transformation efficiency were optimized. Expressions of gfp at different levels were conducted under osmotic stress containing NaCl, KCl, sorbitol or glycerol for the recombinant strains. These improved procedures for protoplast isolation, regeneration and transformation proved to be useful applications in genetic studies for other Candida species and industrial yeast.     

Isolation,Culture and Plant Regeneration of Protoplasts from an Embryogenic Callus Tissue of Gossypium hirsutum

Protoplasts were isolated and cultured from hypocotyl embryogenic callus tissue of Gossypium hirsutum L. cv. "Lumian 6". The highest yields of viable protoplasts were obtained from a vigorous embryogenic callus 7 to 9 d old subcultured on MS medium supplemented with 2 mg/L IAA and 1 mg/L KT using a solution of 1% cellulase Onozuka R-10, 1% pectinase, 0.7 mmol/L KH2PO4, 2.5 mmol/L Ca2+ , and 0.5 mol/L osmoticum (mannitol), at pH 5.8 and at a temperature of 30 ℃. After separation and purification (in 21% sucrose floatation medium), the protoplasts were laid up in a quiet liquid protoplast culture medium containing K3 salts, NT vitamins with 0.1 mg/L 2,4-D, 0.2 mg/L KT and 0.45 mol/L glucose for 10 to 15 min. The protoplasts were fractioned into an upper and a lower layer in the centrifugal tube. Most of the protoplasts in the lower layer were smaller, round and rich in cytoplasts in which contain many granular substances. When this kind of protoplasts were cultured in the thin liquid protoplast culture medium with a density of 1 x l0s to 5 x los protoplasts/mL, the division and the callus formation of the regenerated cells were easily observed. The first divisions occurred in 3 days and small cell clusters could be seen after 2 to 3 weeks in the culture. At this moment, the addition of the protoplast culture medium with decreased osmoticum once or twice is needed for the continuous protoplasts division to form calli. Regenerated calli, 3 to 5 mm in diameter, were transferred in succession on MS medium with 2 mg/L IAA and 1 mg/L KT for the initiation of embryogenesis. The embryoids germinated on the hormonefree MS medium and a number of plantlets were obtained. It seems that using vigorous embryogenic callus and decreasing osmoticum are the two critical factors for plant regeneration of cotton protoplasts.     

Protoplast Formation and Regeneration of Streptococcus bovis Cells

The simultaneous use of hen egg lysozyme and mutanolysin, N-acetylmuramidase SG, showed synergistic effects on the lytic action and more effectiveness for protoplast formation of Streptococcus bovis IFO 12058. The frequency of regeneration reached 100% after 7 days of incubation under the improved conditions and by a method in which protoplasts were overlaid with the agar medium layer.     

1株甲苯降解真菌的筛选鉴定及其降解甲苯的特性

从实验室保存的7株真菌筛选到1株能高效降解甲苯的菌株H1,基于形态特征、ITS序列系统学分析,将H1菌株鉴定为毛栓菌（Trametes hirsuta）。利用正交设计实验方法研究了温度、pH值、甲苯浓度和吐温80浓度对H1菌株降解甲苯的影响,研究得出该菌株降解甲苯的最适条件为30℃、pH 5.0、甲苯浓度300mg/L、吐温80浓度0.05%,在该条件下H1对甲苯的最大降解率为85.3%,降解率比未优化之前有了显著提高。比较了H1菌株在3种培养基产生漆酶的能力,H1在土豆葡萄糖培养基产酶能力最强,在第7天达到酶活高峰16 500 U/L。H1在甲苯为唯一碳源的培养基中,漆酶酶活最低,培养7 d时漆酶酶活为589 U/L。     

红曲霉原生质体的制备、再生及其遗传转化系统

原生质体是研究和建立真菌遗传转化系统的重要工具。为了建立原生质体介导的红曲霉遗传转化系统,考察了各种细胞壁裂解酶和渗透压稳定剂等对红曲霉原生质体形成和再生的影响。将红曲霉分生孢子在铺有玻璃纸的平板上30℃培养30~40 h收获的菌丝体最有利于原生质体的形成和释放。红曲霉菌丝体形成和释放原生质体最适裂解酶和酶解时间分别为：0.3 % lysing enzyme、0.1 % cellulase和1 % snailase的酶组合,30℃作用2.5 h;最适渗透压稳定剂是：1mol /L MgSO4。最适合原生质体再生的培养基为含0.6 mol/L蔗糖的CM培养基。原生质体液涂布单层再生培养基的方法,再生率最高,菌株M34和N18分别为8.5 %和36.4 %。在PEG和CaCl2存在下,以潮霉素B为抗生素选择标记,用质粒pBC-Hygro和pNL1共转化菌株M34原生质体,每微克DNA克获得100个稳定转化子。