Tools for investigating peptide-protein interactions: peptide incorporation of environment-sensitive fluorophores through SPPS-based 'building block' approach

This protocol presents the synthesis and peptide incorporation of environment-sensitive fluorescent amino acids derived from the dimethylamino-phthalimide family. The procedure uses anhydride precursors of 4-dimethylaminophthalimide (4-DMAP) or 6-dimethylaminonaphthalimide (6-DMN), whose syntheses are described in a related protocol by these authors. In this study, the corresponding fluorescent amino acids can be readily obtained in Fmoc-protected form for convenient use as building blocks in solid phase peptide synthesis (SPPS). The time required to complete the procedure depends on the size and the number of peptides targeted. Alternatively, the chromophores can be incorporated directly after SPPS via on-resin derivatization of peptides, which is an option described in a related protocol by these authors.     

Development of a Method for the Solid-Phase Peptide Synthesis in Water

Various organic solvents are routinely used in peptide synthesis, safe disposal of which are now an important environmental problem. To circumvent this problem, during the last few years we focused on developing an organic solvent-free SPPS method using aqueous solvents. For the SPPS in water, we designed protected amino acids that could be used in the aqueous media. Here we described development of several types of water-soluble protected amino acids and their application to the SPPS in water, and a novel technology that uses water-dispersible protected amino acids for in-water peptide synthesis.     

Synthesis of phosphotyrosyl-containing phosphopeptides by solid-phase peptide synthesis.

The synthesis of phosphotyrosine-containing phosphopeptides using solid-phase peptide synthesis (SPPS) techniques is described. We present the synthesis of a Boc-phosphotyrosine derivative, which when used with modifications of the conventional SPPS protocol permits the incorporation of phosphotyrosine into synthetic peptides. The resulting phosphopeptides were authenticated by fast atom bombardment mass spectrometry, amino acid analysis, and phosphate assay. Alkaline phosphatase was found to dephosphorylate synthetic phosphopeptides at different rates, supporting the potential use of these synthetic substrates for studies of phosphoprotein phosphatases. Synthesis of a phosphopeptide using the described protocol has several advantages over the preparation of phosphopeptides via enzymatic phosphorylation.     

Synthesis of all-hydrocarbon stapled α-helical peptides by ring-closing olefin metathesis

This protocol provides a detailed procedure for the preparation of stapled α-helical peptides, which have proven their potential as useful molecular probes and as next-generation therapeutics. Two crucial features of this protocol are (i) the construction of peptide substrates containing hindered α-methyl, α-alkenyl amino acids and (ii) the ring-closing olefin metathesis (RCM) of the resulting resin-bound peptide substrates. The stapling systems described in this protocol, namely bridging one or two turns of an α-helix, are highly adaptable to most peptide sequences, resulting in favorable RCM kinetics, helix stabilization and promotion of cellular uptake.     

Microwave-assisted Boc-solid phase peptide synthesis of cyclic cysteine-rich peptides.

In this study we describe the first protocols for the synthesis of cystine-rich peptides in the presence of microwave radiation with Boc-solid phase peptide synthesis (SPPS). This method is exemplified for macrocyclic peptides known as cyclotides, which comprise approximately 30 amino acids and incorporate a cystine knot arrangement of their three disulfide bonds. However, the method is broadly applicable for a wide range of peptides using Boc-SPPS, especially for SPPS of large peptides via native chemical ligation. Microwave radiation produces peptides in high yield and with high purity, and we were able to reduce the time for the assembly of approximately 30 mer peptide chains to an overnight reaction in the automated microwave-assisted synthesis.     

Making Ends Meet: Microwave-Accelerated Synthesis of Cyclic and Disulfide Rich Proteins Via In Situ Thioesterification and Native Chemical Ligation

The development of synthetic methodologies for cyclic peptides is driven by the discovery of cyclic peptide drug scaffolds such as the plant-derived cyclotides, sunflower trypsin inhibitor 1 (SFTI-1) and the development of cyclized conotoxins. Currently, the native chemical ligation reaction between an N-terminal cysteine and C-terminal thioester group remains the most robust method to obtain a head-to-tail cyclized peptide. Peptidyl thioesters are effectively generated by Boc SPPS. However, their generation is challenging using Fmoc SPPS because thioester linkers are not stable to repeated piperidine exposure during deprotection. Herein we describe a Fmoc-based protocol for synthesizing cyclic peptides adapted for microwave assisted solid phase peptide synthesis. The protocol relies on the linker Di-Fmoc-3,4-diaminobenzoic acid, and we demonstrate the use of Gly, Ser, Arg and Ile as C-terminal amino acids (using HBTU and HATU as coupling reagents). Following synthesis, an N-acylurea moiety is generated at the C-terminal of the peptide; the resin bound acylurea peptide is then deprotected and cleaved from the resin. The fully deprotected peptide undergoes thiolysis in aqueous buffer, generating the thioester in situ. Ultimately, the head-to-tail cyclized peptide is obtained via native chemical ligation. Two naturally occurring cyclic peptides, the prototypical Möbius cyclotide kalata B1 and SFTI-1 were synthesized efficiently, avoiding potential branching at the diamino linker, using the optimized protocol. In addition, we demonstrate the possibility to use the approach for the synthesis of long and synthetically challenging linear sequences, by the ligation of two truncated fragments of a 50-residue long plant defensin.     

New method for peptide purification based on selective removal of truncation peptide impurities after SPPS with orthogonal capping

Peptide purification by high-performance liquid chromatography (HPLC) is associated with high solvent consumption, relatively large effort and lack of efficient parallelization. As an alternative, many catch-and-release (c&r) purification methods have been developed over the last decades to enable the efficient parallel purification of peptides originating from solid-phase peptide synthesis (SPPS). However, with one exception, none of the c&r systems has been widely established in industry and academia until today. Herein, we present an entirely new chromatography-free purification concept for peptides synthesized on a solid support, termed reactive capping purification (RCP). The RCP method relies on the capping of truncation peptides arising from incomplete coupling of amino acids during SPPS with a reactive tag. The reactive tag contains a masked functionality that, upon liberation during cleavage from the resin, enables straightforward purification of the peptide by incubation with a resin-bound reactive moiety. In this work, two different reactive tags based on masked thiols were developed. Capping with these reactive tags during SPPS led to effective modification of truncated sequences and subsequent removal of the latter by chemoselective reaction with a maleimide-functionalized solid support. By introducing a suitable protecting group strategy, the thiol-based RCP method described here could also be successfully applied to a thiol-containing peptide. Finally, the purification of a 15-meric peptide by the RCP method was demonstrated. The developed method has low solvent consumption, has the potential for efficient parallelization, uses readily available reagents, and is experimentally simple to perform.     

Influenza A virus protein PB1-F2: synthesis and characterization of the biologically active full length protein and related peptides.

Recently the discovery of a novel 87 amino acid influenza A virus (IAV) protein, named PB1-F2, has been reported that originates from an alternative reading frame in the PB1 polymerase gene and is encoded in most of the known human IAV isolates. Using optimized protocols, full length biologically active sPB1-F2 and a number of fragments have been synthesized by following either the standard elongation SPPS method or by native chemical ligation of unprotected N- and C-terminal peptide fragments at the histidine and cysteine residues located in position 41 and 42 of the native sequence, respectively. The ligation procedure afforded the most efficient synthesis of sPB1-F2 and facilitated the generation of various mutants of sPB1-F2 from pre-synthesized peptide fragments. During the synthesis of sPB1-F2, the formation of succinimide and subsequent conversion to the piperidine derivative at the aspartic acid residue in position 23 was observed. This reaction was forestalled by applying specific modifications to the SPPS protocol. The chain-elongation SPPS protocol is optimal for producing small peptides of sPB1-F2, their derivatives and precursors for a subsequent ligation protocol, while the full length protein, mutants and labelled derivatives are more conveniently and efficiently synthesized by SPPS protocols that include native chemical ligation. The molecular identity of sPB1-F2 was confirmed by peptide mapping, mass spectrometry, N-terminal sequencing, (1)H NMR spectroscopy and Western blot analysis. The latter analysis afforded direct evidence of the inherent tendency of sPB1-F2 to undergo oligomerization, a phenomenon observed both for full length sPB1-F2 and fragments thereof, as well as for its full length viral counterpart. Our synthesis protocols open the field for multiple biological and structural studies on sPB1-F2 that, similar to the molecule expressed in an IAV context, induces apoptosis and interacts with membranes in vitro and in vivo, as shown in previous studies.     

Optimized selective N-methylation of peptides on solid support.

Peptides containing N(alpha)-methylamino acids exhibit interesting therapeutic profiles and are increasingly recognized as potentially useful therapeutics. Unfortunately, their synthesis is hampered by the high price and nonavailability of many N(alpha)-methylamino acids. An efficient and practical three-step procedure for selective N-methylation of peptides on solid support is described. The procedure was based on the well known solid-phase N-methylation of N(alpha)-arylsulfonyl peptides, which was improved by using dimethylsulfate and the less expensive DBU as base. Every step of the procedure, amine activation by an o-nitrobenzenesulfonyl group, selective N-methylation and removal of the sulfonamide group, was optimized in respect of time and economy. The described optimized three-step procedure is performed in 35 min without solvent changes, instead of 3 h. Tripeptides (Fmoc-Phe-MeXaa-Leu-OH) containing N-methylated common amino acids were also prepared using the optimized procedure to demonstrate its compatibility with these amino acids. The described procedure allows an efficient synthesis of N(alpha)-methylamino acid containing peptides in a very short time using Fmoc solid-phase peptide synthesis.     

Synthesis of anhydride precursors of the environment-sensitive fluorophores 4-DMAP and 6-DMN

This protocol describes the synthesis of cyclic anhydride precursors of the environment-sensitive fluorophores 4-dimethylaminophthalimide (4-DMAP) and 6-dimethylaminonaphthalimide (6-DMN). The condensation of these anhydrides with a primary amino group confers on molecules of interest solvatochromic properties. In particular, two strategies for the insertion of the chromophores into peptides are presented in two companion protocols. The anhydride syntheses can be completed on the gram scale in 2 d for the 4-DMAP precursor and 10-15 d for the 6-DMN precursor.     

Sequence similarities of protein kinase peptide substrates and inhibitors: comparison of their primary structures with immunoglobulin repeats

Forty original sequences of peptide substrates and inhibitors of protein kinases and phosphatases were aligned in a chain matrix without artificial gaps. Fifteen protein kinase peptide substrates and inhibitors (PKSI peptides) contained a common dipeptide ArgArg and also additional important tetra-, tri- and dipeptide homologies. Three further peptide substrates were significantly similar to these peptides but lacked the ArgArg dipeptide. Sequence comparison of individual PKSI peptides revealed probabilistically restricted consensus sequence—PKSI motif—comprising 8 homologous and 13 non-randomly distributed amino acids without considering mutation analysis. This template motif was compared with the consensus sequences of 12 different immunoglobulin domains. In 11 of 12 these domains, the starts of homologous segments were found at nearly the same domain related sites, beginning with serine. A single-triplet mutation, of any of the first two triplet bases that encode equally localized amino acids in each of the two sequence sets (PKSI and Ig) revealed additional homologies with the other set. A primary derived motif version composed of 9 homologous and seven non-randomly distributed amino acids was consequently established by its feedback projection into the original sequence sets. This procedure yielded a second preliminary motif version (revised motif) formed by a sequence of 9 homologous amino acids and two non-randomly distributed amino acids. In addition, three shorter oligopeptide motifs called important stereotypes were derived, based on repeated homology between Ig chains and the revised motif. The most extensive similarities in terms of these stereotypes occurred in the CH2 and CH4 domains of Ig peptides, and inhibitors of cAMP dependent protein kinase and protein kinase A. Further comparisons based on a reference sequence set arranged with the aid of feedback projection revealed a lower similarity between variable Ig chains reflected in a decreased number of homologous amino acids. Two final motif versions, FMC and FMV, were found in two different subsets of constant and variable Ig chains, respectively. FMC was composed of seven homologous and one non-randomly distributed amino acids forming the dispersed structure STLR(C)LVSD, whereas 6 homologous and one questionable amino acid constituted FMV. Only CH4 and CH1 domain segments contained all five high-incidence amino acids, which represented a higher level of similarity than homologous amino acids of all preliminary and final motifs. Four such amino acids were present also in three PKSI peptides. All similarities described here occur in domain segments positionally overlapping with the CDR1 region of variable chains. The results are discussed in terms of immunoglobulin evolution, the position of Fc receptor binding sites and degeneration or mutability of the triplets of motif-constituting amino acids.     

Solid-phase synthesis of an Htc-containingdimer analog of the autophosphorylationsite of pp60src PTK: Effective acylationconditions for Htc residues

Summary The difficulty during SPPS in acylating the secondary amino group of Htc, a locally constrained tyrosine, can be correlated with the steric hindrance of the amino acid or with the conformation of the growing peptide chain. Our experimental data indicate that the availability of the Htc amino group is associated with its steric hindrance rather than a conformational effect of the peptide chain. An optimized solid phase automated protocol for Htc is reported. Under optimal conditions, Fmoc-amino acids with hindered side chains were incorporated in approximately 99% yield using HATU as coupling reagent. Unhindered side chain amino acid acylated the secondary amino group of Htc in good yield under classical HBTU/HOBt coupling conditions. Abbreviations: Abbreviations used for amino acids and the designation of peptides follow the rules of the IUPAC-IUB Commission of Biochemical Nomenclature [J. Biol. Chem., 247 (1972) 977–983]. Amino acid symbols denote thel-configuration where applicable, unless indicated otherwise. The following additional, abbreviations are used     

Development of a tactical screening method to investigate the characteristics of functional peptides

Using spot-synthesized peptide arrays, a functional peptide can be screened as a high-binding peptide for a target molecule. We have developed a rational screening method for functional peptides by analyzing the physicochemical rules of high-binding peptide sequences. To screen the peptides simply and strategically, we prepared an exhaustive 4-mer peptide library consisting of 256 peptides (4⁴ = 256) characterized by four physicochemical groups of 20 amino acids: Group 1, non-charged hydrophobic amino acids; Group 2, non-charged hydrophilic amino acids; Group 3, positive-charged hydrophilic amino acids; Group 4, negative-charged hydrophilic amino acids. First, our previous screening data from cell adhesion, bile acid-binding, and nanoparticle-binding peptides were applied to the four-category analysis, and target-specific physicochemical characteristics were obtained. We then prepared an exhaustive 4-mer peptide library using these four physicochemical groups, and screened for high-binding peptides that bind model proteins interleukin-2 and IgG. We obtained individual physicochemical rules for high-binding peptides: group 1 or 4 amino acids in position (P) 1, group 1 in P2 and P4 for IL-2, and group 2 and 3 amino acids at all position for IgG. Therefore, this system, which employs the use of a simple and strategic peptide library, will be useful in the development of functional peptides.     

Solid-phase synthesis of amidine-substituted phenylbenzimidazoles and incorporation of this DNA binding and recognition motif into amino acid and peptide conjugates

Amidine-substituted phenylbenzimidazoles are well-established DNA-binding structural motifs that have contributed to the development of diverse classes of DNA-targeted agents; this ring system not only assists in increasing the overall DNA affinity of an agent, but can also influence its site selectivity. Seeking a means to conveniently exploit these attributes, a protocol for the on-resin synthesis of amino acid- and peptide-phenylbenzimidazole-amidine conjugates was developed to facilitate installation of phenylbenzimidazole-amidines into peptide chains during the course of standard solid-phase syntheses. Building from a resin-bound amino acid or peptide on Rink amide resin, 4-formyl benzoic acid was coupled to the resin-bound free amine followed by introduction of 3,4-diamino-N′-hydroxybenzimidamide (in the presence of 1,4-benzoquinone) to construct the benzimidazole heterocycle. Finally, the resin-bound N′-hydroxybenzimidamide functionality was reduced to an amidine via 1 M SnCl₂·2H₂O in DMF prior to resin cleavage to release final product. This procedure permits the straightforward synthesis of amino acids or peptides that are N-terminally capped by a phenylbenzimidazole-amidine ring system. Employing this protocol, a series of amino acid–phenylbenzimidazole-amidine (Xaa-R) conjugates was synthesized as well as dipeptide conjugates of the general form Xaa-Gly-R (where R is the phenylbenzimidazole-amidine and Xaa is any amino acid).     

Application of Dmb-Dipeptides in the Fmoc SPPS of Difficult and Aspartimide-Prone Sequences

Mutter’s pseudoproline dipeptides and Sheppard’s Hmb derivatives are powerful tools for enhancing synthetic efficiency in Fmoc SPPS. They work by exploiting the natural propensity of N-alkyl amino acids to disrupt the formation of the secondary structures during peptide assembly. Their use results in better and more predictable acylation and deprotection kinetics, enhanced reaction rates, and improved yields of crude products. However, these approaches have certain limitations: pseudoproline dipeptides can only be used for sequences containing serine or threonine, and the coupling of the amino acid following the Hmb residue can be extremely difficult. To alleviate some of these shortcomings, we have prepared a range of Fmoc-Aaa-(Dmb)Gly-OH dipeptides and tested their efficacy in the synthesis of a number of challenging hydrophobic peptides. We also compared the efficiency of N-Dmb against N-Hmb backbone protection in preventing aspartimide formation in the Fmoc SPPS of peptides containing the Asp-Gly sequence.     

Solid-phase peptide synthesis: from standard procedures to the synthesis of difficult sequences

This protocol for solid-phase peptide synthesis (SPPS) is based on the widely used Fmoc/tBu strategy, activation of the carboxyl groups by aminium-derived coupling reagents and use of PEG-modified polystyrene resins. A standard protocol is described, which was successfully applied in our lab for the synthesis of the corticotropin-releasing factor (CRF), >400 CRF analogs and a countless number of other peptides. The 41-mer peptide CRF is obtained within approximately 80 working hours. To achieve the so-called difficult sequences, special techniques have to be applied in order to reduce aggregation of the growing peptide chain, which is the main cause of failure for peptide chemosynthesis. Exemplary application of depsipeptide and pseudoproline units is shown for synthesizing an extremely difficult sequence, the Asn(15) analog of the WW domain FBP28, which is impossible to obtain using the standard protocol.     

A concise preparation of the fluorescent amino acid l-(7-hydroxycoumarin-4-yl) ethylglycine and extension of its utility in solid phase peptide synthesis

Incorporation of the unnatural amino acid l-(7-hydroxycoumarin-4-yl)ethylglycine (7-HC) is a powerful and reliable approach for the preparation of fluorescently labeled proteins. The growing popularity of this valuable amino acid prompted us to pursue an improved protocol for its synthetic preparation. The optimized procedure here described provides ready access to multi-gram quantities of 7-HC. Also reported is an extension of the utility of 7-HC in the generation of a protected building block suitable for use in solid phase peptide synthesis. The building block was successfully incorporated at various positions in a series of model peptides, including analogues of the cell penetrating HIV-Tat peptide, further illustrating the utility of this unique amino acid.     

Photolysis and ozonolysis of (iso)desmosine-containing crosslinked peptides from porcine aorta elastin

This report describes the use of photolysis and ozonolysis as a means of achieving complete cleavage of the pyridinium ring of (iso)desmosine in crosslinked elastin peptides. Although photolysis leads to the opening of the ring with concomitant formation of lysine, the peptide chains remain attached. Subsequent ozonolysis is able to completely achieve the cleavage of the rest of the ring skeleton, thus leading to the separation of the peptide chains. Formation of new amino acids, i.e. alpha-aminoadipic and glutamic acids, is emphasized. Localization of these amino acids within the released peptides should be of help in structural investigations on the crosslinking zones involving either isodesmosine or desmosine. However, other amino acids such as tyrosine and phenylalanine are sensitive to this procedure and side reactions occur which are responsible for peptide bond cleavage with the formation of breakdown products.