Viscoelastic properties of dispersed chitosan/xanthan hydrogels

In this work a gel was formed by complexation of two natural polyelectrolytes, chitosan and xanthan. Changes in the hydrogels rheological properties have been studied in terms of hydrogel concentration (7–10% w/w), chemical media used for the hydrogel dispersion, and ‘test lag time’; i.e., the time between hydrogel dispersion in the chemical media and the start of the rheological test (up to 390 min). The viscoelastic properties of this polysaccharide system were characterized by oscillatory shear measurements under small-deformation conditions and the results show that chitosan/xanthan hydrogels behave like weak gels. The shear modulus increased almost linearly with frequency in the range studied (0.1–65 s⁻¹). The effects of hydrogel concentration and dispersion medium have been related to electrostatic equilibrium and by the presence of counter-ions modifying the internal structure of the hydrogel.     

Natural electroactive hydrogel from soy protein isolation

A natural electroactive protein hydrogel was prepared from soy protein isolate (SPI) solution by cross-linking with epichlorohydrin. Under electrical stimulus, such SPI hydrogel quickly bends toward one electrode, showing a good electroactivity. Because of its amphoteric nature, the SPI hydrogel bends either toward the anode (pH < 6) or cathode (pH > 6), depending on the pH of the electrolyte solution. Other factors, such as electric field strength, ionic strength and gel thickness also influence the electromechanical behavior of the SPI hydrogels. Moreover, this SPI hydrogel exhibits a good electroactive behavior under strong acidic (pH = 2 - 3) or basic (pH = 11 - 12) solutions, which is a significant improvement over two other kinds of natural electroactive hydrogels, i.e., chitosan/carboxymethylcellulose and chitosan/carboxymethylchitosan hydrogel, which we reported previously. The wide pH range and good electroactivity of this natural protein hydrogel suggests its great potential for microsensor and actuator applications, especially in the biomedical field, and also to increase the scope of natural polymer-based electroactive hydrogels.     

An approach to modulate degradation and mesenchymal stem cell behavior in poly(ethylene glycol) networks

A simple, sequential approach for creation of hydrolytically degradable poly(ethylene glycol) (PEG) hydrogels has been developed and characterized. The chemistry involves an initial step growth polymerization reaction between PEG-diacrylate and dithiothreitol (DTT) to form acrylate-terminated (-PEG-DTT-)n PEG chains, followed by photocross-linking to form a hydrogel network. Varying the extent of step growth polymerization prior to photocross-linking allowed for control over the equilibrium swelling ratio, degradation, and erosion of PEG hydrogels. Hydrogel degradability had a significant effect on behavior of human mesenchymal stem cells (hMSCs) encapsulated within PEG hydrogels, both in the presence and absence of an RGDSP cell adhesion ligand. In particular, enhanced network degradability resulted in enhanced hMSC viability and spreading during in vitro culture. Comparison of degradable and nondegradable hydrogels with similar physical properties (e.g., equilibrium swelling ratio) demonstrated that hMSC viability and spreading were dependent on network degradability. This study demonstrates that hydrolytically degradable PEG hydrogels can be formed via a sequential step growth polymerization and photocross-linking process and the resulting materials may serve as promising matrices for 3-dimensional stem cell culture and tissue engineering applications.     

Synthesis and decoloring properties of sodium humate/poly (N-isopropylacrylamide) hydrogels

A series of novel sodium humate/poly(N-isopropylacrylamide) (SH/PNIPA) hydrogels were synthesized by solution polymerization. The swelling and decoloring properties of SH/PNIPA hydrogels were also examined. Experiment results show that there exist hydrogen-bonding interactions between SH and PNIPA in the SH/PNIPA hydrogels network, which are not strong enough to disrupt the aggregation of dehydrated PNIPA chains at phase transition temperature, leading to the same volume phase transition temperature as pure PNIPA hydrogel. The adsorption and desorption of methylene blue (MB) for the hydrogels were influenced by temperature, initial MB concentration and SH amount. Low temperature favors the adsorption and desorption of MB. Appropriate SH amount of the hydrogels is crucial for the adsorption and desorption of MB. The maximum adsorption capacity was 10.8 mg MB per gram of SH/PNIPA gel.     

Internal transport properties of macroporous sugar polyacrylate hydrogels: microsphere diffusion described by phenomenological laws

We have determined the internal transport properties of heterogeneous, macroporous hydrogels based on the regioregular sugar polyacrylate poly(6-acryloyl-beta-O-methyl-galactopyranoside). This was accomplished by measuring the diffusive flux of variously sized polystyrene microspheres and combining these results with solutions of phenomenological transport laws (the Navier-Stokes equations and Fick's Law with an assumption of first-order irreversible sphere capture by the gel polymer). This enabled calculation of gel properties such as average pore diameters (ca. 11.76 microm) and the diffusivities of the polystyrene spheres in the gel. These values range from 76% to 83% of that in free solution and correlate closely with the equilibrium solution content of the gel (82.3%). This approach has also enabled calculation of the sphere capture rates (2.4 x 10(-3) to 9.6 x 10(-5) s(-1)). These low capture rates indicate that the gel is extremely non-adhesive towards the spheres, and a linear correlation with sphere form drag area (r(2) = 1) was found. The pore sizes of the hydrated gel were observed via DIC light microscopy and the visible effective diameters corresponded very closely to the calculated values (11.66 vs. 11.76 microm). The diffusion/capture of inert spheres in the hydrogel can thus be described in a non-destructive manner by straightforward application of phenomenological transport laws. This result is significant in that these laws were intended to describe macroscopic ensembles of very large numbers of particles in continuous media, not small numbers (i.e., hundreds) in discontinuous media.     

Combining submerged electrospray and UV photopolymerization for production of synthetic hydrogel microspheres for cell encapsulation

Microencapsulation within hydrogel microspheres holds much promise for drug and cell delivery applications. Synthetic hydrogels have many advantages over more commonly used natural materials such as alginate, however their use has been limited due to a lack of appropriate methods for manufacturing these microspheres under conditions compatible with sensitive proteins or cells. This study investigated the effect of flow rate and voltage on size and uniformity of the hydrogel microspheres produced via submerged electrospray combined with UV photopolymerization. In addition, the mechanical properties and cell survival within microspheres was studied. A poly(vinyl alcohol) (PVA) macromer solution was sprayed in sunflower oil under flow rates between 1-100 μL/min and voltages 0-10 kV. The modes of spraying observed were similar to those previously reported for electrospraying in air. Spheres produced were smaller for lower flow rates and higher voltages and mean size could be tailored from 50 to 1,500 μm. The microspheres exhibited a smooth, spherical morphology, did not aggregate and the compressive modulus of the spheres (350 kPa) was equivalent to bulk PVA (312 kPa). Finally, L929 fibroblasts were encapsulated within PVA microspheres and showed viability >90% after 24 h. This process shows great promise for the production of synthetic hydrogel microspheres, and specifically supports encapsulation of cells.     

Noninvasive assessment of collagen gel microstructure and mechanics using multiphoton microscopy

Multiphoton microscopy of collagen hydrogels produces second harmonic generation (SHG) and two-photon fluorescence (TPF) images, which can be used to noninvasively study gel microstructure at depth (~1 mm). The microstructure is also a primary determinate of the mechanical properties of the gel; thus, we hypothesized that bulk optical properties (i.e., SHG and TPF) could be used to predict bulk mechanical properties of collagen hydrogels. We utilized polymerization temperature (4–37°C) and glutaraldehyde to manipulate collagen hydrogel fiber diameter, space-filling properties, and cross-link density. Multiphoton microscopy and scanning electron microscopy reveal that as polymerization temperature decreases (37–4°C) fiber diameter and pore size increase, whereas hydrogel storage modulus (G′, from 23 ± 3 Pa to 0.28 ± 0.16 Pa, respectively, mean ± SE) and mean SHG decrease (minimal change in TPF). In contrast, glutaraldehyde significantly increases the mean TPF signal (without impacting the SHG signal) and the storage modulus (16 ± 3.5 Pa before to 138 ± 40 Pa after cross-linking, mean ± SD). We conclude that SHG and TPF can characterize differential microscopic features of the collagen hydrogel that are strongly correlated with bulk mechanical properties. Thus, optical imaging may be a useful noninvasive tool to assess tissue mechanics.     

Hydrolytically degradable hyaluronic acid hydrogels with controlled temporal structures

Polysaccharides are being processed into biomaterials for numerous biological applications due to their native source in numerous tissues and biological functions. For instance, hyaluronic acid (HA) is found abundantly in the body, interacts with cells through surface receptors, and can regulate cellular behavior (e.g., proliferation, migration). HA was previously modified with reactive groups to form hydrogels that are degraded by hyaluronidases, either added exogenously or produced by cells. However, these hydrogels may be inhibitory and their applications are limited if the appropriate enzymes are not present. Here, for the first time, we synthesized HA macromers and hydrogels that are both hydrolytically (via ester group hydrolysis) and enzymatically degradable. The hydrogel degradation and growth factor release was tailored through the hydrogel cross-linking density (i.e., macromer concentration) and copolymerization with purely enzymatically degradable macromers. When mesenchymal stem cells (MSCs) were encapsulated in the hydrogels, cellular organization and tissue distribution was influenced by the copolymer concentration. Importantly, the distribution of released extracellular matrix molecules (e.g., chondroitin sulfate) was improved with increasing amounts of the hydrolytically degradable component. Overall, this new macromer allows for enhanced control over the structural evolution of the HA hydrogels toward applications as biomaterials.     

Refolding hydrogels self-assembled from N-(2-hydroxypropyl)methacrylamide graft copolymers by antiparallel coiled-coil formation

A novel hybrid hydrogel system based on N-(2-hydroxypropyl)methacrylamide copolymers was proposed. It consisted of the hydrophilic polymer backbone and a pair of oppositely charged peptide grafts. Two distinct pentaheptad peptides (CCE and CCK) were anticipated to create a dimerization motif and serve as physical cross-linkers. Consequently, the graft copolymers CCE-P and CCK-P self-assembled into hybrid hydrogels in situ; the process was modulated by the formation of antiparallel heterodimeric coiled-coils. This approach possesses an advantage to decrease the steric hindrance of the polymer backbone on the "in-register" alignment of peptide grafts. Indeed, equimolar mixtures of the graft copolymers, CCE-P/CCK-P, have been observed to self-assemble into hydrogels in PBS solution at neutral pH at concentrations as low as 0.1 wt %. Circular dichroism spectroscopy, sedimentation equilibrium experiments, and microrheology revealed that the self-assembly process corresponded to the two-stranded alpha-helical coiled-coil formation between CCE and CCK. Moreover, the formation of hybrid hydrogels was reversible. Denaturation of the coiled-coil domains with guanidine hydrochloride (GdnHCl) solutions resulted in disassembly of the hydrogels. Removal of GdnHCl by dialysis caused coiled-coil refolding and hydrogel reassembly. Scanning electron microscopy results demonstrated that the concentration of the graft copolymers had a significant impact on the structure and morphology of self-assembled hydrogels.     

Evaluation of mucoadhesive hydrogels loaded with diclofenac sodium-chitosan microspheres for rectal administration

Considering the advantageous for the rectal administration of non-steroidal anti-inflammatory drugs, the objective of this study was to formulate and evaluate rectal mucoadhesive hydrogels loaded with diclofenac-sodium chitosan (DFS-CS) microspheres. Hydroxypropyl methylcellulose (HPMC; 5%, 6%, and 7% w/w) and Carbopol 934 (1% w/w) hydrogels containing DFS-CS microspheres equivalent to 1% w/w active drug were prepared. The physicochemical characterization revealed that all hydrogels had a suitable pH for rectal application (6.5–7.4). The consistency of HPMC hydrogels showed direct proportionality to the concentration of the gelling agent, while carbopol 934 gel showed its difficulty for rectal administration. Farrow’s constant for all hydrogels were greater than one indicating pseudoplastic flow. In vitro drug release from the mucoadhesive hydrogel formulations showed a controlled drug release pattern, reaching 34.6–39.7% after 6 h. The kinetic analysis of the release data revealed that zero-order was the prominent release mechanism. The mucoadhesion time of 7% w/w HPMC hydrogel was 330 min, allowing the loaded microspheres to be attached to the surface of rectal mucosa. Histopathological examination demonstrated the lowest irritant response to the hydrogel loaded with DFS-CS microspheres in response to other forms of the drug.     

Synthesis of antibacterial PVA/CM-chitosan blend hydrogels with electron beam irradiation

A series of excellent hydrogels were prepared from poly(vinyl alcohol) (PVA) and carboxymethylated chitosan (CM-chitosan) with electron beam irradiation (EB) at room temperature. Electron spectroscopy analysis of the blend hydrogels revealed that good miscibility was sustained between CM-chitosan and PVA. The properties of the prepared hydrogels, such as the mechanical properties, gel fraction and swelling behavior were investigated. The mechanical properties and equilibrium degree of swelling improved obviously after adding CM-chitosan into PVA hydrogels. The gel fraction determined gravimetrically showed that a part of CM-chitosan was immobilized onto PVA hydrogel. The further analyses of FTIR and DSC spectra of the prepared gels after extracting sol manifested that there was a grafting interaction between PVA and CM-chitosan molecules under irradiation. The antibacterial activity of the hydrogels against Escherichia coli was also measured via optical density method. The blend hydrogels exhibited satisfying antibacterial activity against E. coli, even when the CM-chitosan concentration was only 3 wt%.     

Molecular dynamics study of the influence of solvents on the structure and mechanical properties of poly(vinyl alcohol) gels

Molecular dynamics (MD) simulations were employed to study the influence of solvents on the structure and mechanical properties of physically crosslinked poly(vinyl alcohol) (PVA) gels. Firstly, three kinds of PVA precursor gels were made by adding water, dimethyl sulfoxide (DMSO) and a mixture of DMSO and water (4:1 by weight), respectively. The solvents in the precursor gels were then exchanged with water to obtain three kinds of PVA hydrogels. Solvent in the precursor gel with a mixture of DMSO and water was also exchanged with ethanol and DMSO, respectively. It was found that the tensile strength and failure strain of the PVA hydrogel prepared from precursor gel with a mixture of DMSO and water was the highest, and the polymer network was more homogeneous than the other two PVA hydrogels. The polymer network of PVA gel with ethanol or with DMSO was more heterogenous than with water, and the tensile strength and failure strain were much lower. The torsional activity of polymer chains of PVA gel with ethanol was much stronger than PVA gel with water and DMSO.     

Hydrogels for osteochondral repair based on photocrosslinkable carbamate dendrimers

First generation, photocrosslinkable dendrimers consisting of natural metabolites (i.e., succinic acid, glycerol, and beta-alanine) and nonimmunogenic poly(ethylene glycol) (PEG) were synthesized divergently in high yields using ester and carbamate forming reactions. Aqueous solutions of these dendrimers were photocrosslinked with an eosin-based photoinitiator to afford hydrogels. The hydrogels displayed a range of mechanical properties based on their structure, generation size, and concentration in solution. All of the hydrogels showed minimal swelling characteristics. The dendrimer solutions were then photocrosslinked in situ in an ex vivo rabbit osteochondral defect (3 mm diameter and 10 mm depth), and the resulting hydrogels were subjected to physiologically relevant dynamic loads. Magnetic resonance imaging (MRI) showed the hydrogels to be fixated in the defect site after the repetitive loading regimen. The ([G1]-PGLBA-MA) 2-PEG hydrogel was chosen for the 6 month pilot in vivo rabbit study because this hydrogel scaffold could be prepared at low polymer weight (10 wt %) and possessed the largest compressive modulus of the 10% formulations, a low swelling ratio, and contained carbamate linkages, which are more hydrolytically stable than the ester linkages. The hydrogel-treated osteochondral defects showed good attachment in the defect site and histological analysis showed the presence of collagen II and glycosaminoglycans (GAGs) in the treated defects. By contrast, the contralateral unfilled defects showed poor healing and negligible GAG or collagen II production. Good mechanical properties, low swelling, good attachment to the defect site, and positive in vivo results illustrate the potential of these dendrimer-based hydrogels as scaffolds for osteochondral defect repair.     

Photopolymerized thermosensitive hydrogels: synthesis, degradation, and cytocompatibility

In situ forming hydrogels based on thermosensitive polymers have attractive properties for tissue engineering. However, the physical interactions in these hydrogels are not strong enough to yield gels with sufficient stability for many of the proposed applications. In this study, additional covalent cross-links were introduced by photopolymerization to improve the mechanical properties and the stability of thermosensitive hydrogels. Methacrylate groups were coupled to the side chains of triblock copolymers (ABA) with thermosensitive poly( N-(2-hydroxypropyl) methacrylamide lactate) A blocks and a hydrophilic poly(ethylene glycol) B block. These polymers exhibit lower critical solution temperature (LCST) behavior in aqueous solution and the cloud point decreased with increasing amounts of methacrylate groups. These methacrylate groups were photopolymerized above the LCST to render covalent cross-links within the hydrophobic domains. The mechanical properties of photopolymerized hydrogels were substantially improved and their stability was prolonged significantly compared to nonphotopolymerized hydrogels. Whereas non-UV-cured gels disintegrated within 2 days at physiological pH and temperature, the photopolymerized gels degraded in 10 to 25 days depending on the degree of cross-linking. To assess biocompatibility, goat mesenchymal stem cells were seeded on the hydrogel surface or encapsulated within the gel and they remained viable as demonstrated by a LIVE/DEAD cell viability/cytotoxicity assay. Expression of alkaline phosphatase and production of collagen I demonstrated the functionality of the mesenchymal stem cells and their ability to differentiate upon encapsulation. Due to the improved mechanical properties, stability, and adequate cytocompatibility, the photopolymerized thermosensitive hydrogels can be regarded as highly potential materials for applications in tissue engineering.     

pH响应型蔗渣木质素水凝胶的制备及其对蛋白质的控释性能

该研究以蔗渣木质素和甲基丙烯酸为原料合成了pH敏感型蔗渣木质素/聚甲基丙烯酸水凝胶,对其合成条件、pH敏感性、溶胀-退溶胀性能以及对牛血清蛋白的控释等性质进行研究,并采用红外光谱、扫描电镜等对凝胶进行表征。结果表明:(1)对凝胶溶胀比影响的因素由大到小依次为甲基丙烯酸用量、交联剂用量、催化剂用量、反应的温度、木质素用量。当甲基丙烯酸单体浓度为1.75 mol·L~(-1)、木质素浓度为25 g·L~(-1)、交联剂浓度为3.25×10~(-2)mol·L~(-1)、引发剂浓度为1.25×10~(-2)mol·L~(-1)、反应温度为65℃时,所得水凝胶在模拟肠液中的溶胀比最大(28.16 g·g~(-1))。与不加木质素的聚甲基丙烯酸水凝胶相比,蔗渣木质素/聚甲基丙烯酸水凝胶的溶胀比有所下降,但其敏感pH由4~5碱移至6~8。(2)蔗渣木质素/聚甲基丙烯酸水凝胶的溶胀—退溶胀可逆性受组成的影响较大,但相对于聚甲基丙烯酸水凝胶,蔗渣木质素/聚甲基丙烯酸水凝胶对pH值的敏感响应性更强、响应速率更快,同时能在更短时间内达到溶胀平衡。(3)加入木质素可以提高水凝胶对牛血清蛋白的负载量,所试验的蔗渣木质素/聚甲基丙烯酸水凝胶样品对牛血清蛋白的最大负载量可达577 mg·g~(-1)。(4)牛血清蛋白在12 h后基本可达释放平衡;在模拟胃液中,牛血清蛋白的释放率仅10%,而在模拟肠液中释放率达92%。pH响应型蔗渣木质素/聚甲基丙烯酸水凝胶可以作为口服型蛋白类药物的潜在载体。     

Disulfide cross-linked hyaluronan hydrogels

A new disulfide cross-linking strategy was developed to prepare hyaluronic acid (HA) hydrogel from thiol-modified HA. First, dithiobis(propanoic dihydrazide) (DTP) and dithiobis(butyric dihydrazide) (DTB) were synthesized and then coupled to HA with carbodiimide chemistry. Next, disulfide bonds of the initially formed gel were reduced using dithiothreitol (DTT) to give, after exhaustive dialysis, the corresponding thiol-modified macromolecular derivatives HA-DTPH and HA-DTBH. The degree of substitution of HA-DTPH and HA-DTBH could be controlled from 20% to 70% of available glucuronate carboxylic acid groups. The pK(a) values of the HA-thiol derivatives were determined spectrophotometrically to be pK(a) = 8.87 (HA-DTPH) and pK(a) = 9.01 (HA-DTBH). The thiol groups could be oxidized in air to reform disulfide linkages, which resulted in HA-DTPH and HA-DTBH hydrogel films. Further oxidation of these hydrogels with dilute H(2)O(2) created additional cross-links and afforded poorly swellable films. The disulfide cross-linking was reversible, and films could be again reduced to sols with DTT. Release of blue dextran from cross-linked films was used as a model for drug release. The rapid gelation of the HA-DTPH solution under physiological conditions was also achieved, which demonstrated the capacity for in situ cell encapsulation. Thus, L-929 murine fibroblasts were encapsulated in HA-DTPH hydrogel; these cells remained viable and proliferated during 3 days of culture in vitro.     

Dynamic light scattering study of self-assembly of HPMA hybrid graft copolymers

The time course of self-assembly of a hybrid hydrogel system was investigated using dynamic light scattering (DLS) techniques. The self-assembling system consisted of a hydrophilic synthetic N-(2-hydroxypropyl)methacrylamide (HPMA) polymer backbone and a pair of oppositely charged peptide grafts (CCE and CCK). These two distinct pentaheptad peptides were anticipated to act as physical cross-linkers by the formation of antiparallel coiled-coil heterodimers. Equimolar mixture of HPMA graft copolymers CCE-P and CCK-P solutions (where P is the HPMA copolymer backbone) with total concentration from 1.25 to 10 mg/mL were measured at a scattering angle 90 degrees and room temperature. A critical extension of average relaxation time was observed with increasing concentration and incubation time. To reveal the role of coiled-coil grafts in the self-assembly process, a pair of modified random coil peptides, CCEw and CCKy, was designed. The DLS evaluation of HPMA copolymer conjugates (CCEw-P and CCKy-P) at total concentration of 10 mg/mL demonstrated that no association occurred after 28 h of incubation. Moreover, addition of a competing peptide (CCK) or a denaturant (guanidium chloride, GndHCl) to the self-assembled CCE-P/CCK-P hydrogels resulted in partial disassembly or collapse of the hydrogel clusters. These results correlated to changes in the secondary structure of peptides (grafts) as measured by circular dichroism spectroscopy (CD). These investigations supported the hypothesis that the self-assembly of CCE-P/CCK-P into hybrid hydrogels is mediated by the formation of coiled-coil heterodimers.     

Biodegradable and biocompatible synthetic saccharide-Peptide hydrogels for three-dimensional stem cell culture

Saccharide-peptide hydrogels have been developed in our laboratory as new synthetic extracellular matrices for regenerative medicine applications. In this work, we have expanded on our previously reported system and applied copolymerization of cysteine (Cys) and vinyl sulfone (VS)-functionalized saccharide-peptide polymers via Michael-type addition for encapsulation and 3D culture of cells. Specifically, our aims were to (1) develop a novel hydrogel platform, which could be applied for encapsulating and culturing mesenchymal stem cells (MSCs) in a 3D environment, (2) characterize the tunable properties of the hydrogel, specifically, degradation, mechanical, and gel network properties, and (3) determine the biocompatibility of the saccharide-peptide hydrogel material with MSCs. Hydrogel mechanical properties were tunable by varying the VS:Cys ratio (= 0.5, 1, or 2) as well as the pH (6, 7, or 8) of the cross-linking components. Stiffer gels were formed at VS:Cys = 1 and pH 6 or 7. Gels formed at pH 8 or with excess Cys (VS:Cys = 0.5) or VS (VS:Cys = 2) were significantly softer. Cross-linking pH and VS:Cys ratio also had an effect on the degradation behavior of the VS:Cys gels, with higher cross-linking pH resulting in an accelerated loss of mass. On the basis of environmental scanning electron microscopy (ESEM) analysis and fluorescence microscopy, all hydrogels appeared to exhibit porous gel networks. MSCs cultured in monolayer and exposed to soluble Cys or VS copolymers (0.1-5 mg/mL) did not exhibit measurable cytotoxicity. In addition, MSCs were cultured in 3D for up to 14 days in vitro without deleterious effects on cell viability. In summary, we have established and characterized a tunable 3D saccharide-peptide hybrid copolymer hydrogel platform for culturing MSCs. Future studies will focus on utilizing the hydrogel system for controlling the differentiation of MSCs.     

Characterization of protein release from hydrolytically degradable poly(ethylene glycol) hydrogels

We present a novel fully hydrophilic, hydrolytically degradable poly(ethylene glycol) (PEG) hydrogel suitable for soft tissue engineering and delivery of protein drugs. The gels were designed to overcome drawbacks associated with current PEG hydrogels (i.e., reaction mechanisms or degradation products that compromise protein stability): the highly selective and mild cross‐linking reaction allowed for encapsulating proteins prior to gelation without altering their secondary structure as shown by circular dichroism experiments. Further, hydrogel degradation and structure, represented by mesh size, were correlated to protein release. It was determined that polymer density had the most profound effect on protein diffusivity, followed by the polymer molecular weight, and finally by the specific chemical structure of the cross‐linker. By examining the diffusion of several model proteins, we confirmed that the protein diffusivity was dependent on protein size as smaller proteins (e.g., lysozyme) diffused faster than larger proteins (e.g., Ig). Furthermore, we demonstrated that the protein physical state was preserved upon encapsulation and subsequent release from the PEG hydrogels and contained negligible aggregation or protein–polymer adducts. These initial studies indicate that the developed PEG hydrogels are suitable for release of stable proteins in drug delivery and tissue engineering applications. Biotechnol. Bioeng. 2011; 108:197–206. © 2010 Wiley Periodicals, Inc.     

Injectable, mixed natural-synthetic polymer hydrogels with modular properties

A series of synthetic oligomers (based on the thermosensitive polymer poly(N-isopropylacrylamide) and carbohydrate polymers (including hyaluronic acid, carboxymethyl cellulose, dextran, and methylcellulose) were functionalized with hydrazide or aldehyde functional groups and mixed using a double-barreled syringe to create in situ gelling, hydrazone-cross-linked hydrogels. By mixing different numbers and ratios of different reactive oligomer or polymer precursors, covalently cross-linked hydrogel networks comprised of different polymeric components are produced by simple mixing of reactive components, without the need for any intermediate chemistries (e.g., grafting). In this way, hydrogels with defined swelling, degradation, phase transition, drug binding, and mechanical properties can be produced with properties intermediate to those of the mixture of reactive precursor polymers selected. When this modular mixing approach is used, one property can (in many cases) be selectively modified while keeping other properties constant, providing a highly adaptable method of engineering injectable, rapidly gelling hydrogels for potential in vivo applications.