Synthesis and evaluation of polymeric continuous bed (monolithic) reversed-phase gradient stationary phases for capillary liquid chromatography and capillary electrochromatography

There is a demand of novel high resolution separation media for separation of complex mixtures, particularly biological samples. One of the most flexible techniques for development of new separation media currently is synthesis of the continuous bed (monolithic) stationary phases. In this study the capillary format gradient stationary phases were formed using continuous bed (monolith) polymerization in situ. Different reversed-phase stationary phase gradients were tailored and their resolution using capillary liquid chromatography and capillary electrochromatography at isocratic mobile phase conditions was evaluated. It is demonstrated, that efficiency and resolution of the gradient stationary phases can be substantially increased comparing to the common (isotropic) stationary phases. The proposed formation approach of the gradient stationary phase is reproducible and compatible with the capillary format or microchip format separations. It can be easily automated for the separation optimizations or mass production of the capillary columns or chips.     

Monolithic organic polymeric columns for capillary liquid chromatography and electrochromatography

This review briefly summarizes the present state of the preparation and use of capillary monolithic columns for liquid chromatography (LC) and electrochromatography (EC). Most important approaches to the preparation of monolithic stationary phases based on organic polymers are outlined and the properties of the monoliths obtained are compared with those of classical particulate phases. A few selected applications of monolithic columns are shown to demonstrate the most important advantages of monolithic capillary columns. It is concluded that both the monolithic and particulate capillary columns are important and that judicious choice of the type suitable for a particular application requires careful consideration of the purpose of the separation and the properties of the solutes to be separated. Monolithic columns are substantially younger than packed ones and thus will require further theoretical and experimental study to further improve their preparation and to enable reliable prediction of their properties and applicability; nevertheless, they are very promising for the future.     

Synthesis and evaluation of polymeric continuous bed (monolithic) reversed-phase gradient stationary phases for capillary liquid chromatography and capillary electrochromatography

There is a demand of novel high resolution separation media for separation of complex mixtures, particularly biological samples. One of the most flexible techniques for development of new separation media currently is synthesis of the continuous bed (monolithic) stationary phases. In this study the capillary format gradient stationary phases were formed using continuous bed (monolith) polymerization in situ. Different reversed-phase stationary phase gradients were tailored and their resolution using capillary liquid chromatography and capillary electrochromatography at isocratic mobile phase conditions was evaluated. It is demonstrated, that efficiency and resolution of the gradient stationary phases can be substantially increased comparing to the common (isotropic) stationary phases. The proposed formation approach of the gradient stationary phase is reproducible and compatible with the capillary format or microchip format separations. It can be easily automated for the separation optimizations or mass production of the capillary columns or chips.     

Hydroxymethyl methacrylate-based monolithic columns designed for separation of oligonucleotides in hydrophilic-interaction capillary liquid chromatography

Hydroxymethyl methacrylate-based monolithic columns for separation of oligonucleotides by capillary liquid chromatography (CLC) were prepared. We optimized composition of the polymerization mixture, which contained the monomer mixture consisting of N-(hydroxymethyl) methacrylamide (HMMAA) and ethylene dimethacrylate (EDMA), and the porogenic system composed of propane-1-ol, butane-1,4-diol and alpha, alpha'-azoisobutyronitrile (AIBN) as initiator. Separations of oligonucleotides were performed in HILIC (hydrophilic-interaction) mode using 100 mM triethylamine acetate (TEAA) in acetonitrile and in water as eluents. The influence of steepness of the mobile phase gradient on separation of the oligonucleotides was evaluated as well as the reproducibility of HMMAA monolith preparation.     

Hydroxymethyl methacrylate-based monolithic columns designed for separation of oligonucleotides in hydrophilic-interaction capillary liquid chromatography

Hydroxymethyl methacrylate-based monolithic columns for separation of oligonucleotides by capillary liquid chromatography (CLC) were prepared. We optimized composition of the polymerization mixture, which contained the monomer mixture consisting of N-(hydroxymethyl) methacrylamide (HMMAA) and ethylene dimethacrylate (EDMA), and the porogenic system composed of propane-1-ol, butane-1,4-diol and α, α′-azoisobutyronitrile (AIBN) as initiator. Separations of oligonucleotides were performed in HILIC (hydrophilic-interaction) mode using 100 mM triethylamine acetate (TEAA) in acetonitrile and in water as eluents. The influence of steepness of the mobile phase gradient on separation of the oligonucleotides was evaluated as well as the reproducibility of HMMAA monolith preparation.     

Monolithic capillary columns for liquid chromatography-electrospray ionization mass spectrometry in proteomic and genomic research

Peptides, proteins, single-stranded oligonucleotides, and double-stranded DNA fragments were separated with high resolution in micropellicular, monolithic capillary columns prepared by in situ radical copolymerization of styrene and divinylbenzene. Miniaturized chromatography both in the reversed-phase and the ion-pair reversed-phase mode could be realized in the same capillary column because of the nonpolar character of the poly-(styrene/divinylbenzene) stationary phase. The high chromatographic performance of the monolithic stationary phase facilitated the generation of peak capacities for the biopolymers in the range of 50-140 within 10 min under gradient elution conditions. Employing volatile mobile phase components, separations in the two chromatographic separation modes were on-line hyphenated to electrospray ionization (tandem) mass spectrometry, which yielded intact accurate molecular masses as well as sequence information derived from collision-induced fragmentation. The inaccuracy of mass determination in a quadrupole ion trap mass spectrometer was in the range of 0.01-0.02% for proteins up to a molecular mass of 20000, and 0.02-0.12% for DNA fragments up to a molecular mass of 310000. High-performance liquid chromatography-electrospray ionization mass spectrometry utilizing monolithic capillary columns was applied to the identification of proteins by peptide mass fingerprinting, tandem mass spectrometric sequencing, or intact molecular mass determination, as well as to the accurate sizing of double-stranded DNA fragments ranging in size from 50 to 500 base pairs, and to the detection of sequence variations in DNA fragments amplified by the polymerase chain reaction.     

Applications of monolithic silica capillary columns in proteomics

The use and applicability of silica based capillary monolithic reversed-phase columns in proteomic analysis has been evaluated by liquid chromatography-mass spectrometry (LC-MS). Chromatographic performance of the monolithic capillaries was evaluated with a tryptic digest of cytochrome C showing very good resolution and reproducibility in addition to the known advantages of a low pressure drop over a time period of 6 months. Monoliths were subsequently tested for their suitability to separate proteins and peptides from samples typically encountered in proteomic research such as in-gel digested tryptic peptide mixtures or fractions of proteolytically digested human serum. The monolithic capillaries also proved useful in the analysis of phospholipid species in bronchoalveolar lavage fluid. Compared to particle-filled conventional capillary columns, rapid and highly efficient separation of peptides and proteins was achieved using these bimodal pore size distribution columns, and good quality collision induced dissociation (CID) mass spectra were obtained on an ion trap mass spectrometer. These novel monolithic separation media are thus a promising addition to the methodological toolbox of proteomics research.     

NopM and NopD are rhizobial nodulation outer proteins: identification using LC-MALDI and LC-ESI with a monolithic capillary column

We have explored the potential of commercial polystyrene-divinylbenzene monolithic capillary nanoLC-MS/MS for identifying Sinorhizobium fredii HH103 nodulation outer proteins. Monolithic nanoLC with off-line MALDI-TOF/TOF and on-line ESI-q-oTOF is fast and robust, generating complementary data and offering high-confidence protein identifications from gel bands too weak for successful analysis using traditional approaches. This has allowed identification of two proteins not previously described as being type III-secreted in rhizobia, NopM and NopD.     

Enantioseparation of tetrahydropalmatine and Tröger's base by molecularly imprinted monolith in capillary electrochromatography

Two chiral compounds, Tr?ger's base and tetrahydropalmatine, were enantioseparated on the (5S, 11S)-(-)-Tr?ger's base and l-tetrahydropalmatine imprinted monolithic capillary columns with CEC, respectively. The monoliths were prepared by in situ thermal-initiated copolymerization of methacrylic acid (MAA) and ethylene dimethacrylate (EDMA). After optimizing the ratio of porogens (toluene and dodecanol), the obtained monolithic capillary columns show good flow-through property and enantioselectivity. The influences of CEC parameters such as pH of the buffer, organic solvent and salt concentration on the electroosmotic flow (EOF) and recognition selectivity were systematically investigated. Under the optimal conditions, baseline resolutions of two chiral compounds were achieved. In addition, the fast separation was obtained within 4 min by applying higher voltage and assisting pressure of 6 bar.     

A new fast method for nanoLC-MALDI-TOF/TOF-MS analysis using monolithic columns for peptide preconcentration and separation in proteomic studies

A new fast method for identification and characterization of proteolytic digests of proteins by monolithic liquid chromatography coupled with mass spectrometry has been developed. The advantages of the monolithic columns are a high-pressure stability and low back pressure resulting in higher flow rates for capillary or nanosize columns simplifying the system handling. As was shown in several publications, such monolithic stationary phases are highly qualified for the analysis of peptides and proteins, but so far, only small volumes could be injected into the system, which might hamper the sample preparation leading to protein precipitation and partial loss of sample. To overcome the problem of small injection volumes, we established a system including a short monolithic trap column to allow preconcentration of the peptides. The injected sample is flushed at higher flow rates onto the trap column, bound to the stationary phase, and in this way concentrated in a few nanoliters before starting the separation. The expanded system was optimized and tested using different reference protein samples. Eluting peptides were detected by MALDI-TOF/TOF-MS and identified by database searching. The system is now a permanent part for proteome analysis in our lab, and as such, it was successfully applied for the detection of post-translational modifications and the analysis of membrane proteins. One example for these analyses is also included in this paper.     

Preparation of highly efficient monolithic silica capillary columns for the separations in weak cation-exchange and HILIC modes

Weak cation-exchange (WCX) and HILIC modes columns were prepared by on-column polymerization of acrylic acid on monolithic silica capillary columns modified with N-(3-triethoxysilylpropyl)methacrylamide anchor groups. The polymer-coated columns could be used for HILIC mode separation of pyridylamino (PA)-sugars and peptides including a tryptic digest of BSA, while for weak cation-exchange mode for the separation of proteins and nucleosides even at high linear velocity. The poly(acrylic acid) coated monolithic silica capillary columns showed greater retention toward PA-sugars than a polyacrylamide coated monolithic silica capillary columns prepared in the same manner. Proteins and nucleosides were separated effectively at pH 6.9 using the same column. The column provided fair permeability after the polymer-coating step. High-speed separation of proteins at u=4.66 mm/s with high efficiency was shown to be possible, while high-speed separation of nucleosides has achieved within one minute using the column at u=8.67 mm/s, suggesting that the column will be suitable for the second dimension separation of multidimensional HPLC systems.     

Enantioseparation of tetrahydropalmatine and Tröger's base by molecularly imprinted monolith in capillary electrochromatography

Two chiral compounds, Tröger's base and tetrahydropalmatine, were enantioseparated on the (5S, 11S)-(-)-Tröger's base and l-tetrahydropalmatine imprinted monolithic capillary columns with CEC, respectively. The monoliths were prepared by in situ thermal-initiated copolymerization of methacrylic acid (MAA) and ethylene dimethacrylate (EDMA). After optimizing the ratio of porogens (toluene and dodecanol), the obtained monolithic capillary columns show good flow-through property and enantioselectivity. The influences of CEC parameters such as pH of the buffer, organic solvent and salt concentration on the electroosmotic flow (EOF) and recognition selectivity were systematically investigated. Under the optimal conditions, baseline resolutions of two chiral compounds were achieved. In addition, the fast separation was obtained within 4 min by applying higher voltage and assisting pressure of 6 bar.     

Electrochromatographic characterization of methacrylate ester-based monolith and capillary electrochromatography separation of flavonoids

A porous polymethacrylate ester-based monolithic column for capillary electrochromatography (CEC) was designed by mean of in situ co-polymerizing lauryl methacrylate (LMA), ethylene dimethacrylate (EDMA) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) in a ternary porogenic solvent including cyclohexanol, 1,4-butanediol and water. After investigating the influence factors of the CEC monolithic columns, four flavonoids (i.e., Rutin, Quercetin, Kaempferol, and Quercitrin) were separated and assayed to evaluate this monolithic column with CEC method. Under optimum conditions, the CEC method exhibited high separation efficiency, with rapid separation time of 3–4 min, for the four flavonoid samples using 10 mM phosphate buffer containing 70% acetonitrile (pH 9.0). Importantly, the proposed method could provide a promising approach for rapid separation and detection in biomedicine.     

Microscale separation and analysis

There is a recent and growing interest in microscale separation and analysis, a result of advantages of miniaturization such as rapid separation times, high performance and throughput, reduced costs, and the possibility of system integration and multiplexing. Adopting the concepts of conventional capillary electrophoresis, capillary electrochromatography, micellar electrokinetic chromatography and various sample preparation techniques to microchip format, in conjunction with the integration of different analysis steps into a monolithic system, have opened new levels in performance, functionality and throughput. This review summarizes the recent advances in the field of microfabricated separation devices for genomics, proteomics and high-throughput screening applications, also addressing system integration and micropreparative functionalities.     

Preparation of highly efficient monolithic silica capillary columns for the separations in weak cation-exchange and HILIC modes

Weak cation-exchange (WCX) and HILIC modes columns were prepared by on-column polymerization of acrylic acid on monolithic silica capillary columns modified with N-(3-triethoxysilylpropyl)methacrylamide anchor groups. The polymer-coated columns could be used for HILIC mode separation of pyridylamino (PA)-sugars and peptides including a tryptic digest of BSA, while for weak cation-exchange mode for the separation of proteins and nucleosides even at high linear velocity. The poly(acrylic acid) coated monolithic silica capillary columns showed greater retention toward PA-sugars than a polyacrylamide coated monolithic silica capillary columns prepared in the same manner. Proteins and nucleosides were separated effectively at pH 6.9 using the same column. The column provided fair permeability after the polymer-coating step. High-speed separation of proteins at u = 4.66 mm/s with high efficiency was shown to be possible, while high-speed separation of nucleosides has achieved within one minute using the column at u = 8.67 mm/s, suggesting that the column will be suitable for the second dimension separation of multidimensional HPLC systems.     

HPLC separation of some purine and pyrimidine derivatives on Chromolith Performance Si monolithic column

The chromatographic behavior of some purines and pyrimidines on a monolithic Chromolith Performance Si column under normal-phase high-performance liquid chromatography mode has been studied. Column pressure, column efficiency and selectivity of Chromolith Performance Si column were compared to those of conventional spherical 5 microm silica packed columns Econosphere Silica and Zorbax Rx-SIL. The investigation has shown that application of Chromolith Performance Si column for analysis of polar solutes can reduce the separation time without sacrificing column efficiency and selectivity. Improvement of the monolithic silica column efficiency for polar solutes is observed when ternary mobile phases (mixtures of hexane-isopropanol with ethylene glycol, water or acetonitrile) are applied.     

Enantioseparations with cellulose tris(3-chloro-4-methylphenylcarbamate) in nano-liquid chromatography and capillary electrochromatography

Cellulose tris(3-chloro-4-methylphenylcarbamate) was coated onto native and aminopropylsilanized silica in order to prepare chiral stationary phases (CSPs) for enantioseparations using nano-liquid chromatography (nano-LC) and capillary electrochromatography (CEC). The effect of the chiral selector loading onto silica, mobile phase composition and pH, as well as separation variables on separation of enantiomers was studied. It was found that CSPs based on cellulose tris(3-chloro-4-methylphenylcarbamate) can be used for preparation of very stable capillary columns useful for enantioseparations in nano-LC and CEC in combination with polar organic mobile phases.     

Mutation detection by capillary denaturing high-performance liquid chromatography using monolithic columns

The high resolving power of the chromatographic separation of single- and double-stranded nucleic acids in 200 microm i.d. monolithic poly(styrene-divinylbenzene) capillary columns was utilized for mutation screening in polymerase chain reaction amplified polymorphic loci. Recognition of mutations is based on the separation of homo- and heteroduplex species by ion-pair reversed-phase high-performance liquid chromatography (IP-RP-HPLC) under partially denaturing conditions, resulting in characteristic peak patterns both for homozygous and heterozygous samples. Six different single nucleotide substitutions and combinations thereof were confidently identified in 413 bp amplicons from six heterozygous individuals each of which yielded a different unique chromatographic profile. Alternatively, mutations were identified in short, 62 bp PCR products upon their complete on-line denaturation at 75 degrees C taking advantage of the ability of IP-RP-HPLC to resolve single-stranded nucleic acids of identical length that differ in a single nucleotide. Separations in monolithic capillary columns can be readily hyphenated to electrospray ionization mass spectrometry and promise increased sample throughput by operating in arrays similar to those already used in capillary electrophoresis.     

Determination of low levels of poly(ethylene glycol) 400 in plasma and urine by capillary gas chromatography-selected ion-monitoring mass spectrometry after solid-phase extraction

A convenient and sensitive method for the quantitative determination of poly(ethylene glycol) 400 in plasma and urine with capillary gas chromatography-mass spectrometry has been developed. The sample preparation involves solid-phase extraction with subsequent derivatization with heptafluorobutyric anhydride, which proved to give the most stable derivative. The derivatization procedure was optimized using experimental design, and different solid-phase extraction columns were evaluated. The limit of quantitation was 1 μmol/l (0.4 μg/ml) for both plasma and urine.     

HPLC separation of some purine and pyrimidine derivatives on Chromolith Performance Si monolithic column

The chromatographic behavior of some purines and pyrimidines on a monolithic Chromolith Performance Si column under normal-phase high-performance liquid chromatography mode has been studied. Column pressure, column efficiency and selectivity of Chromolith Performance Si column were compared to those of conventional spherical 5 μm silica packed columns Econosphere Silica and Zorbax Rx-SIL. The investigation has shown that application of Chromolith Performance Si column for analysis of polar solutes can reduce the separation time without sacrificing column efficiency and selectivity. Improvement of the monolithic silica column efficiency for polar solutes is observed when ternary mobile phases (mixtures of hexane–isopropanol with ethylene glycol, water or acetonitrile) are applied.