Microtubules beneath the pellicles of two ciliate protozoa as seen with the SEM

Chemical procedures remove some of the outer 3 limiting membranes of 2 ciliate protozoa, Euplotes eurystomus and Tetrahymena pyriformis, and reveal sheets of microtubules in their ectoplasm for SEM study. This greatly enhances the analysis of the 3-dimensional geometry of these sheets, as is shown especially for E. eurystomus. In this organism, sheets of microtubules can readily be observed and described as they course through or around parts of th oral apparatus and other 3-dimensionally complex regions.     

Influences of the interference of γ-tubulin gene expression on the morphology and microtubules of ciliate Euplotes eurystomus

A recombinant plasmid L4440-GTU expressing γ-tubulin dsRNA of the ciliate Euplotes eurystomus was constructed and transferred into Escherichia coli strain HT115. The resultant E. coli bacteria were fed on E. eurystomus to inhibit the ciliate's γ-tubulin gene expression. As a result, the γ-tubulin gene expression level was decreased, and this inactivation blocked cell division, which was lethal. In addition, the loss of the C-tubule from the nine-microtubule triplets in basal bodies, and the disappearance of some microtubules or mislocalization of some microtubule organization units in the subpellicular microtubule layers were also observed. These results indicate that the γ-tubulin is not only important for the stability of the nine-microtubule triplets in basal bodies, but also necessary for the integrity of microtubule organization patterns in the subpellicular microtubule layer.     

Structural basis of motility in the microtubular axostyle: implications for cytoplasmic microtubule structure and function

The gross morphology of the protozoan microtubule axostyle of Saccinobaculus ambloaxostylus can now be described in macromolecular detail. The left-handed coil of the axostyle is seen to be dependent upon the asymmetry inherent in the constituent microtubules as expressed by the specific array of linkages between microtubules and by a possible tendency for microtubules to coil into left-handed helices. The laminated sheets of microtubules are not aligned parallel to the long axis of the organelle, but become increasingly tilted off-axis as one descends through the sheets of microtubules from the convex to the concave surface of the axostyle. Fine-structural analysis of the axostyle indicates similarities of the linkages to dynein. The potential loci of the force-generating protein(s) are discussed as well as implications of the axostyle's structure on general microtubule function.     

Ultrastructure of Pellicular and Ciliary Structures of Euplotes eurystomus

SYNOPSIS. Many of the sub-pellicular and infraciliary structures in protozoa have proved difficult to study with standard thin-sectioning technics. When these structures are viewed in isolated and fragmented form, many of the thin-sectioning difficulties are circumvented. Langmuir-trough isolation followed by critical-point drying, as well as thin sectioning, were used in this study to determine the patterns of sub-pellicular microtubules and fibrils interconnecting kinetosomes of membranelles and cirri of Euplotes eurystomus. The fibrillar network in the bases of these ciliary organelles is presented in some detail and apparent variations in pattern are noted. Functional aspects of some of the structures are discussed. With special preparation nearly whole Euplotes may be obtained for study in the electron microscope. Fused cilia were frequently obtained and their ultrastructure was studied.     

Formation of double-walled microtubules and multilayered tubulin sheets by basic proteins

Some basic proteins enable microtubule protein to form special assembly products in vitro, known as double-walled microtubules. Using histones (H1, core histones) as well as the human encephalitogenic protein to induce the formation of double-walled microtubules, we made the following electron microscopic observations: (1) Double-walled microtubules consist of an "inner" microtubule which is covered by electron-dense material, apparently formed from the basic protein, and by a second tubulin wall. (2) The tubulin of the second wall seems to be arranged as protofilaments, surrounding the inner microtubule in a helical or ring-like manner. (3) The surface of double-walled microtubules lacks the projections of microtubule-associated proteins, usually found on microtubules. (4) In the case of protofilament ribbons (incomplete microtubules), H1 binds exclusively to their convex sides that correspond to the surface of microtubules. Zn2+-induced tubulin sheets, consisting in contrast to microtubules of alternately arranged protofilaments, are covered by H1 on both surfaces. Furthermore, multilayered sheet aggregates appeared. The results indicate that the basic proteins used interact only with that protofilament side which represents the microtubule surface. In accordance with this general principle, models on the structure of double-walled microtubules and multilayered tubulin sheets were derived.     

Behavior of C-shaped microtubule endings in the cell

The association of incomplete microtubule assemblies with either another incomplete structure or complete microtubules was studied in two organisms, the phytoflagellate Polytoma papillatum and the phorid fly Megaselia scalaris, using transmission electron microscopy. In the alga, hook-shaped appendages on cytoplasmic and spindle microtubules were detected. These resulted from the lateral association of a curved ribbon of protofilaments with the surface of a complete microtubular wall. In the fly, an S-shaped protofilament sheet was found embedded in the kinetochore plate of a prometaphase I spermatocyte. Tracing of the S-shaped element towards the spindle pole revealed that it was formed by the lateral junction of two curved protofilament sheets. In all cases, the C-shaped protofilament sheets represented the endings of complete microtubules. Incomplete microtubules are generally considered as representing intermediates of microtubule assembly and disassembly. Since high molecular weight proteins are believed to be responsible for maintaining microtubule-microtubule spacing, it is hypothesized that the endings of growing and shrinking microtubules are sparsely studded with these proteins; their depletion allows lateral microtubule contacts. In addition, the microtubule-microtubule contacts may be rendered possible by the flexibility of the slender elongated microtubule-associated molecules. Relatively long C-shaped protofilament appendages (0.6-1.4 microns) were detected in this study. Therefore, it is plausible to assume that the protofilament sheets are stabilized by contact with one another or with an intact tubule wall.     

In vitro DNA synthesis in the macronuclear replication band of Euplotes eurystomus

Isolated macronuclei from the hypotrichous ciliated protozoan Euplotes eurystomus incorporate biotinylated dUTP specifically into the replication band (RB) as detected with immunofluorescence, using rabbit anti-biotin antibodies followed by fluorescein-conjugated goat anti-rabbit IgG. When gold-conjugated goat anti-rabbit IgG was used in a preembedded reaction, subsequent immunoelectron microscopic analysis demonstrated that the biotinylated nucleotide appeared more concentrated in the rear zone of the RB, with almost no labeling in the forward zone. It was possible to use the immunofluorescent assay to establish that incorporation of biotinylated dUTP is inhibited by simultaneous addition of N-ethyl maleimide or aphidicolin, and by omission of any one of the other unlabeled dNTPs. In addition, prolonged heat shock of the intact cells, before lysis and in vitro assay, yielded markedly reduced incorporation. Comparison with published data on the in vivo incorporation of [3H]thymidine into Euplotes eurystomus RBs indicates the fidelity of the in vitro reaction.     

An electron microscopy journey in the study of microtubule structure and dynamics

Structural characterization of microtubules has been the realm of three‐dimensional electron microscopy and thus has evolved hand in hand with the progress of this technique, from the initial 3D reconstructions of stained tubulin assemblies, and the first atomic model of tubulin by electron crystallography of 2D sheets of protofilaments, to the ever more detailed cryoelectron microscopy structures of frozen‐hydrated microtubules. Most recently, hybrid helical and single particle image processing techniques, and the latest detector technology, have lead to atomic models built directly into the density maps of microtubules in different functional states, shading new light into the critical process of microtubule dynamic instability.     

Antibodies against Tetrahymena 14-nm filament-forming protein recognize the replication band in Euplotes

Tetrahymena 14-nm filament-forming protein (49K protein) is a structural protein which is involved in activity of the pronuclei during conjugation (O. Numata, T. Sugai, and Y. Watanabe (1985) Nature (London) 314, 192-194). Using monoclonal and polyclonal antibodies, we here demonstrate the presence of a cross-reactive protein (CRP-49) within the macronuclear replication bands of Euplotes harpa and E. eurystomus which is recognized by anti-49K protein antibodies. Immunoblotting reveals that both monoclonal and polyclonal antibodies cross-react to a protein with an apparent molecular mass of 50 kDa in an E. harpa cell extract and to a protein of 49 kDa in a macronuclear extract of E. eurystomus. The antibodies used in this study have no effect upon in vitro DNA synthesis in the replication band of E. eurystomus.     

Stereoselectivity of the guanyl-exchangeable nucleotide-binding site of tubulin probed by guanosine 5'-O-(2-thiotriphosphate) diastereoisomers

The active site of the exchangeable nucleotide-binding site of tubulin was studied by using diastereoisomers A (Sp) and B (Rp) of guanosine 5'-O-(2-thiotriphosphate) (GTP beta S) where the phosphorus atom to which sulfur is attached is chiral. Turbidimetric measurements were used to follow kinetics, and electron microscopy was used to evaluate polymeric forms. Both isomers at 0.5 mM promoted the assembly of tubulin in buffer containing 0.1 M 2-(N-morpholino)ethanesulfonic acid, 30% glycerol, 3 mM MgCl2, and 1 mM EGTA, pH 6.6, 23-37 degrees C. GTP beta S(A) promoted assembly into microtubules, although a few bundles were also found by electron microscopy. However, GTP beta S(B) induced assembly of tubulin into bundles of sheets and microtubules. As expected, 0.5 mM GTP induced tubulin to assemble into microtubules, thin sheets, and a few bundles. Both GTP and GTP beta S(A) were hydrolyzed in the tubulin polymers. However, more than 95% of the bound GTP beta S(B) was not hydrolyzed. Higher concentrations of GTP beta S(B), i.e., 1 mM, also induced bundles of sheets and microtubules, with 86% of the thionucleotide bound as the triphosphate. The GTP beta S(B)-induced polymers were considerably more cold stable than the GTB beta S(A)-induced microtubules, which were more cold stable than GTP-induced polymers. Mg(II) (2-5 mM) had minimal effects on the structures induced by GTP beta S(A) or -(B) isomers in the tubulin assembly system. However, at 1 mM Mg(II), no assembly was found with GTP beta S(A) and tubulin.(ABSTRACT TRUNCATED AT 250 WORDS)     

Changes in the fine structure of tanycytes during the annual reproductive cycle of the male little brown bat Myotis lucifugus lucifugus.

The hypothalamic arcuate nucleus in the male little brown bat Myotis lucifugus lucifugus was studied with the electron microscope. Animals were killed by intracardial perfusion at each season throughout the year so that the arcuate nucleus could be examined for seasonal variations in morphology. Striking seasonal changes in the fine structure of ependymal tanycytes lining the arcuate nucleus were observed. Tanycytes in animals collected in the fall and early winter exhibited pale processes characterized by a scant internal framework of microtubules and fine filaments. These processes, which were found throughout the arcuate nucleus, exhibited simple irregular shapes. In animals collected between January and June, tanycyte processes contained dense accumulations of fine filaments intermingled with microtubules, and projected long attenuated extensions that often formed multilamellar sheets around axodendritic terminals or other neuronal elements. Tanycyte processes of animals collected in July and August were densely packed with microtubules and fine filaments. The processes radiated elaborate multilamellar extensions that encapsulated axons, dendrites and even entire neuronal perikarya. Multilamellar sheets consisted of as many as 10 or 12 closely spaced gyres. The seasonal variations in tanycyte structure are suggestive of astrocyte-like behaviour. These changes are discussed with respect to seasonal changes in hypothalamic neuroendocrine activity.     

Kinetic analysis of cooperativity in tubulin polymerization in the presence of guanosine di- or triphosphate nucleotides

In vitro polymerization of pig brain tubulin, highly purified and deprived of microtubule-associated proteins, was followed by turbidimetry. Treatment of the data yielded the relation existing between the observed turbidity and the amount of polymer formed. This allowed a kinetic analysis, according to Oosawa's theories, of the polymerization process, which consisted of a slow spontaneous nucleation followed by the growth process. The apparent elongation rate constant was closely related to the nucleation process and exhibited a highly cooperative variation with tubulin concentration. The cooperativity was indicative of the size of the nucleus which appears to remain the same whether sheets or microtubules are formed. Magnesium ions appear to play a role in the polymorphism of tubulin polymers, the proportion of microtubules to sheets increasing with magnesium ion concentration. From kinetic experiments evidence was provided for GDP binding in competition with GTP, with a sixfold lower affinity. The tubulin-GDP complex could participate in microtubules elongation, but was not able to form nuclei. The critical concentration of tubulin in the presence of GDP was roughly twice as high as in the presence of GTP.     

Differential distribution of alpha-tubulin isotypes in Euplotes eurystomus determined by confocal immunofluorescence microscopy

Detergent permeabilized Euplotes eurystomus (a fresh water hypotrichous ciliate) was reacted with monoclonal and polyclonal antibodies specific for either detyrosinated or tyrosinated alpha-tubulin (Glu- or Tyr-tubulin). The isolated cytoskeleton-nuclear complex was examined by Western immunoblotting and by immunofluorescent and electron microscopic methods. Both Glu- and Tyr-tubulins were detected by immunoblot analysis. Immunofluorescent microscopy indicated that the alpha-tubulin isotypes are concentrated in different regions of permeabilized cells: Glu-tubulin is located primarily in cirri, membranelles, and surrounding the macro- and micronuclei. Tyr-tubulin is principally at the bases of cirri and membranelles. This differential distribution of alpha-tubulin isotypes is discussed in terms of current concepts concerning the correlation of tubulin post-translational modifications to microtubule stability. Confocal immunofluorescent imaging was of critical importance in clearly differentiating the Glu-tubulin isotype surrounding the macro- and micronuclei from a brilliantly fluorescent environment originating from cytoskeletal structures. In conjunction with conventional and stereo-electron microscopy, confocal optical microscopy provided convincing evidence for a "basket" of microtubules surrounding both nuclei.     

A structural analysis of the interaction between ncd tail and tubulin protofilaments

ncd is a minus-end directed, kinesin-like motor, which binds to microtubules with its motor domain and its cargo domain as well. Typical of retrograde motors, the motor domain of ncd locates to the C-terminal end of the polypeptide chain, and hence, the cargo domain constitutes the N-terminal region. To date, several studies have investigated the interaction properties of the motor domain with microtubules, but very few structural data are available about the tail itself or its interaction with microtubules as cargo. Here, we applied cryo-electron microscopy and helical 3D image reconstruction to 15 protofilament microtubules decorated with an ncd tail fragment (N-terminal residues 83-187, named NT6). In our study, the ncd tail shows a behaviour resembling filamentous MAPs such as tau protein, exhibiting a highly flexible structure with no large globular domains. NT6 binds to four different sites on the outer side of microtubules within the proximity of the kinesin motor-binding site. Two of these sites locate within the groove between two neighbouring protofilaments, and appear as strong binding sites, while the other two sites, located at the outer rim, appear to play a secondary role. In addition, the ncd tail fragment induces the formation of large protofilament sheets, suggesting a tail-induced modification of lateral protofilament contacts.     

Surface topography of microtubule walls decorated with monomeric and dimeric kinesin constructs

The surface topography of opened-up microtubule walls (sheets) decorated with monomeric and dimeric kinesin motor domains was investigated by freeze-drying and unidirectional metal shadowing. Electron microscopy of surface-shadowed specimens produces images with a high signal/noise ratio, which enable a direct observation of surface features below 2 nm detail. Here we investigate the inner and outer surface of microtubules and tubulin sheets with and without decoration by kinesin motor domains. Tubulin sheets are flattened walls of microtubules, keeping lateral protofilament contacts intact. Surface shadowing reveals the following features: (i) when the microtubule outside is exposed the surface relief is dominated by the bound motor domains. Monomeric motor constructs generate a strong 8 nm periodicity, corresponding to the binding of one motor domain per alpha-beta-tubulin heterodimer. This surface periodicity largely disappears when dimeric kinesin motor domains are used for decoration, even though it is still visible in negatively stained or frozen hydrated specimens. This could be explained by disorder in the binding of the second (loosely tethered) kinesin head, and/or disorder in the coiled-coil tail. (ii) Both surfaces of undecorated sheets or microtubules, as well as the inner surface of decorated sheets, reveal a strong 4 nm repeat (due to the periodicity of tubulin monomers) and a weak 8 nm repeat (due to slight differences between alpha- and beta-tubulin). The differences between alpha- and beta-tubulin on the inner surface are stronger than expected from cryo-electron microscopy of unstained microtubules, indicating the existence of tubulin subdomain-specific surface properties that reflect the surface corrugation and hence metal deposition during evaporation. The 16 nm periodicity visible in some negatively stained specimens (caused by the pairing of cooperatively bound kinesin dimers) is not detected by surface shadowing.     

Structural intermediates in the assembly of taxoid-induced microtubules and GDP-tubulin double rings: time-resolved X-ray scattering.

We have studied the self-association reactions of purified GDP-liganded tubulin into double rings and taxoid-induced microtubules, employing synchrotron time-resolved x-ray solution scattering. The experimental scattering profiles have been interpreted by reference to the known scattering profiles to 3 nm resolution and to the low-resolution structures of the tubulin dimer, tubulin double rings, and microtubules, and by comparison with oligomer models and model mixtures. The time courses of the scattering bands corresponding to the different structural features were monitored during the assembly reactions under varying biochemical conditions. GDP-tubulin essentially stays as a dimer at low Mg(2+) ion activity, in either the absence or presence of taxoid. Upon addition of the divalent cations, it associates into either double-ring aggregates or taxoid-induced microtubules by different pathways. Both processes have the formation of small linear (short protofilament-like) tubulin oligomers in common. Tubulin double-ring aggregate formation, which is shown by x-ray scattering to be favored in the GDP- versus the GTP-liganded protein, can actually block microtubule assembly. The tubulin self-association leading to double rings, as determined by sedimentation velocity, is endothermic. The formation of the double-ring aggregates from oligomers, which involves additional intermolecular contacts, is exothermic, as shown by x-ray and light scattering. Microtubule assembly can be initiated from GDP-tubulin dimers or oligomers. Under fast polymerization conditions, after a short lag time, open taxoid-induced microtubular sheets have been clearly detected (monitored by the central scattering and the maximum corresponding to the J(n) Bessel function), which slowly close into microtubules (monitored by the appearance of their characteristic J(0), J(3), and J (n) - (3) Bessel function maxima). This provides direct evidence for the bidimensional assembly of taxoid-induced microtubule polymers in solution and argues against helical growth. The rate of microtubule formation was increased by the same factors known to enhance taxoid-induced microtubule stability. The results suggest that taxoids induce the accretion of the existing Mg(2+)-induced GDP-tubulin oligomers, thus forming small bidimensional polymers that are necessary to nucleate the microtubular sheets, possibly by binding to or modifying the lateral interaction sites between tubulin dimers.     

MICROTUBULE SURFACE LATTICE AND SUBUNIT STRUCTURE AND OBSERVATIONS ON REASSEMBLY

Neuronal microtubules have been reassembled from brain tissue homogenates and purified. In reassembly from purified preparations, one of the first structures formed was a flat sheet, consisting of up to 13 longitudinal filaments, which was identified as an incomplete microtubule wall. Electron micrographs of these flat sheets and intact microtubules were analyzed by optical diffraction, and the surface lattice on which the subunits are arranged was determined to be a 13 filament, 3-start helix. A similar, and probably identical, lattice was found for outer-doublet microtubules. Finally, a 2-D image of the structure and arrangement of the microtubule subunits was obtained by processing selected images with a computer filtering and averaging system. The 40 x 50 Å morphological subunit, which has previously been seen only as a globular particle and identified as the 55,000-dalton tubulin monomer, is seen in this higher resolution reconstructed image to be elongated, and split symmetrically by a longitudinal cleft into two lobes.     

Maintenance of membrane sheets by cultured oligodendrocytes requires continuous microtubule turnover and Golgi transport

Oligodendrocytes in murine shakeoff cultures elaborate extensive membrane sheets containing networks of microtubules. Several membrane components, including proteolipid protein (PLP) and sulfatide, are transported through the Golgi en route to the plasma membrane or myelin (1,2). This transport is essential for membrane assembly, but its role in continuing maintenance of the sheets is not known. We examined the stability of the membrane sheets following microtubule stabilization with taxol or block of transport into the Golgi with brefeldin A. Within one to three hours, both agents had marked effects on the membrane sheets. While some oligodendrocytes maintained regions of normal membrane sheets, many showed retraction of the sheets, with the majority now exhibiting multiple processes rather than sheets. The distribution of sulfatide, PLP and tubulin in cell bodies, processes and sheets was altered in treated cells, as analyzed by immunocytochemical staining with antibodies to these components. The Golgi apparatus also showed reorganization in the presence of taxol, as visualized by binding of wheat germ agglutinin, a lectin with high affinity for distal Golgi vesicles. All of these effects were reversible when the agents were removed after 3 hours. Thus, maintenance of membrane sheets by oligodendrocytes in culture is a dynamic process, requiring ongoing microtubule turnover and transport of molecules through the Golgi.Abbreviations PLP proteolipid protein - WGA wheat germ agglutinin Special issue dedicated to Dr. Bernard W. Agranoff.     

Tubulin protofilaments and kinesin-dependent motility

Microtubules are built of tubulin subunits assembled into hollow cylinders which consist of parallel protofilaments. Thus, motor molecules interacting with a microtubule could do so either with one or several tubulin subunits. This makes it difficult to determine the structural requirements for the interaction. One way to approach the problem is to alter the surface lattice. This can be done in several ways. Proto-filaments can be exposed on their inside (C-tubules or "sheets"), they can be made antiparallel (zinc sheets), or they can be rolled up (duplex tubules). We have exploited this polymorphism to study how the motor protein kinesin attached to a glass surface interacts and moves the various tubulin assemblies. Microtubules glide over the surface along straight paths and with uniform velocities. In the case of C-tubules, approximately 40% glide similarly to microtubules, but a major fraction do not glide at all. This indicates (a) that a full cylindrical closure is not necessary for movement, and (b) that the inside surface of microtubules does not support gliding. With zinc sheets, up to 70% of the polymers move, but the movement is discontinuous, has a reduced speed, and follows along a curved path. Since zinc sheets have protofilaments alternating in orientation and polarity, this result suggests that in principle a single protofilament can produce movement, even when its neighbors cannot. Duplex microtubules do not move because they are covered with protofilaments coiled inside out, thus preventing the interaction with kinesin. The data can be explained by assuming that the outside of one protofilament represents the minimal track for kinesin, but smooth gliding requires several parallel protofilaments. Finally, we followed the motion of kinesin-coated microbeads on sea-urchin sperm flagella, from the flagellar outer doublet microtubules to the singlet microtubule tips extending from the A-tubules. No change in behavior was detected during the transition. This indicates that even if these microtubules differ in surface lattice, this does not affect the motility.