The construction of a genetic linkage map of non-heading Chinese cabbage （Brassica campestris ssp. chinensis Makino）

Non-heading Chinese cabbage （Brassica carnpestris ssp. chinensis Makino） is one of the most important vegetables in eastern China. A genetic linkage map was constructed using 127 doubled haploid （DH） lines, and the DH population was derived from a commercial hybrid ＂Hanxiao＂ （lines SW-13 x L-118）. Out of the 614 polyrnorphic markers, 43.49% were not assigned to any of the linkage groups （LGs）. Chi-square tests showed that 42.67% markers were distorted from expected Mendelian segregation ratios, and the direction of distorted segregation was mainly toward the paternal parent L-118. After sequentially removing the markers that had an interval distance smaller than 1 cM from the upper marker, the overall quality of the linkage map was increased. Two hundred and sixty-eight molecular markers were mapped into 10 LGs, which were anchored to the corresponding chromosome of the B. rapa reference map based on com- mon simple sequence repeat （SSR） markers. The map covers 973.38 cM of the genome and the average interval distance between markers was 3.63 cM. The number of markers on each LG ranged from 18 （R08） to 64 （R07）, with an average interval distance within a single LG from 1.70 cM （R07） to 6.71 cM （R06）. Among these mapped markers, 169 were sequence-related amplified polymorphism （SRAP） molecular markers, 50 were SSR markers and 49 were random amplification polymorphic DNA （RAPD） markers. With further saturation to the LG9 the current map offers a genetic tool for loci analysis for important agronomic traits.     

An amplified fragment length polymorphism map of the silkworm

The silkworm (Bombyx mori L.) is a lepidopteran insect with a long history of significant agricultural value. We have constructed the first amplified fragment length polymorphism (AFLP) genetic linkage map of the silkworm B. mori at a LOD score of 2.5. The mapping AFLP markers were genotyped in 47 progeny from a backcross population of the cross no. 782 x od100. A total of 1248 (60.7%) polymorphic AFLP markers were detected with 35 PstI/TaqI primer combinations. Each of the primer combinations generated an average of 35.7 polymorphic AFLP markers. A total of 545 (44%) polymorphic markers are consistent with the expected segregation ratio of 1:1 at the significance level of P = 0.05. Of the 545 polymorphic markers, 356 were assigned to 30 linkage groups. The number of markers on linkage groups ranged from 4 to 36. There were 21 major linkage groups with 7-36 markers and 9 relatively small linkage groups with 4-6 markers. The 30 linkage groups varied in length from 37.4 to 691.0 cM. The total length of this AFLP linkage map was 6512 cM. Genetic distances between two neighboring markers on the same linkage group ranged from 0.2 to 47 cM with an average of 18.2 cM. The sex-linked gene od was located between the markers P1T3B40 and P3T3B27 at the end of group 3, indicating that AFLP linkage group 3 was the Z (sex) chromosome. This work provides an essential basic map for constructing a denser linkage map and for mapping genes underlying agronomically important traits in the silkworm B. mori L.     

Linkage Map Construction and Quantitative Trait Loci Analysis for Bolting Based on a Double Haploid Population of Brassica rapa

Early bolting of Chinese cabbage （Brassica rapa L.） during spring cultivation often has detrimental effects on the yield and quality of the harvested products. Breeding late bolting varieties is a major objective of Chinese cabbage breeding programs. In order to analyze the genetic basis of bolting traits, a genetic map of B. rapa was constructed based on amplified fragment-length poiymorphism （AFLP）, sequence-related amplified poiymorphism （SRAP）, simple sequence repeat （SSR）, random amplification of polymorphic DNA （RAPD）, and isozyme markers. Marker analysis was carried out on 81 double haploid （DH） lines obtained by microspore culture from F1 progeny of two homozygous parents： B. rapa L. ssp. pekinensis （BY） （an extra-early bolting Chinese cabbage line） and B. rapa L. ssp. rapifera （MM） （an extra-late bolting European turnip line）. A total of 326 markers including 130 AFLPs, 123 SRAPs, 16 SSRs, 43 RAPDs and 14 isozymes were used to construct a linkage map with 10 linkage groups covering 882 cM with an average distance of 2.71 cM between loci. The bolting trait of each DH line was evaluated by the bolting index under controlled conditions. Quantitative trait loci （QTL） analysis was conducted using multiple QTL model mapping with MapQTL5.0 software. Eight QTLs controlling bolting resistance were identified. These QTLs, accounting for 14.1% to 25.2% of the phenotypic variation with positive additive effects, were distributed into three linkage groups. These results provide useful information for molecular marker-assisted selection of late bolting traits in Chinese cabbage breeding programs.     

Linkage Map of the Honey Bee, Apis Mellifera, Based on Rapd Markers

A linkage map was constructed for the honey bee based on the segregation of 365 random amplified polymorphic DNA (RAPD) markers in haploid male progeny of a single female bee. The X locus for sex determination and genes for black body color and malate dehydrogenase were mapped to separate linkage groups. RAPD markers were very efficient for mapping, with an average of about 2.8 loci mapped for each 10-nucleotide primer that was used in polymerase chain reactions. The mean interval size between markers on the map was 9.1 cM. The map covered 3110 cM of linked markers on 26 linkage groups. We estimate the total genome size to be ~3450 cM. The size of the map indicated a very high recombination rate for the honey bee. The relationship of physical to genetic distance was estimated at 52 kb/cM, suggesting that map-based cloning of genes will be feasible for this species.     

利用向日葵重组自交系构建遗传图谱

以向日葵自选系K55为母本、K58为父本杂交组合,通过单粒传得到的187个F_5：6代重组自交系群体为作图材料,联合应用SSR和AFLP标记构建遗传连锁图谱。经过78对SSR引物和48对AFLP引物组合选择性扩增,分别得到341和1119条带,共1460条,分别获得多态性条带184条和393条,共577条多态性条带,占所有条带的39.52%。SSR和AFLP标记各有84个和108个多态性标记偏离孟德尔分离比例(P=0.05),共192个偏分离标记。采用JoinMap4.0软件进行连锁分析,构建了1张总长度为2759.4 cM、包含17个连锁群、连锁495个多态性标记的遗传图谱,其中偏分离标记170个,标记间的平均图距为5.57 cM。每个连锁群上分布有5~72个标记,长68.88~250.17 cM。本图谱为向日葵永久性图谱,为向日葵重要性状QTL定位和基因克隆奠定基础。     

A comparative genetic map of the turkey genome

Genetic markers (microsatellites and SNPs) were used to create and compare maps of the turkey and chicken genomes. A physical map of the chicken genome was built by comparing sequences of turkey markers with the chicken whole-genome sequence by BLAST analysis. A genetic linkage map of the turkey genome (Meleagris gallopavo) was developed by segregation analysis of genetic markers within the University of Minnesota/Nicholas Turkey Breeding Farms (UMN/NTBF) resource population. This linkage map of the turkey genome includes 314 loci arranged into 29 linkage groups. An additional 40 markers are tentatively placed within linkage groups based on two-point LOD scores and 16 markers remain unlinked. Total map distance contained within linkage groups is 2,011 cM with the longest linkage group (47 loci) measuring 413.3 cM. Average marker interval over the 29 linkage groups was 6.4 cM. All but one turkey linkage group could be aligned with the physical map of the chicken genome. The present genetic map of the turkey provides a comparative framework for future genomic studies.     

A genetic linkage map and comparative genome analysis of common carp (Cyprinus carpio L.) using microsatellites and SNPs

A genetic linkage map is a powerful research tool for mapping traits of interest and is essential to understanding genome evolution. The aim of this study is to provide an expanded genetic linkage map of common carp to effectively carry out quantitative trait loci analysis and conduct comparative mapping analysis between lineages. Here, we constructed a genetic linkage map of common carp (Cyprinus carpio L.) using microsatellite and single-nucleotide polymorphism (SNP) markers in a 159 sibling family. A total of 246 microsatellites and 306 SNP polymorphic markers were genotyped in this family. Linkage analysis using JoinMap 4.0 organized 427 markers (186 microsatellites and 241 SNPs) to 50 linkage groups, ranging in size from 1.4 to 130.1 cM. Each group contained 2-30 markers. The linkage map covered a genetic distance of 2,039.2 cM and the average interval for markers within the linkage groups was approximately 6.4 cM. In addition, comparative genome analysis within five model teleost fish revealed a high percentage (74.7%) of conserved loci corresponding to zebrafish chromosomes. In most cases, each zebrafish chromosome comprised two common carp linkage groups. The comparative analysis also revealed independent chromosome rearrangements in common carp and zebrafish. The linkage map will be of great assistance in mapping genes of interest and serve as a reference to approach comparative mapping and enable further insights into the comprehensive investigations of genome evolution of common carp.     

The reference genetic linkage map for the multinational Brassica rapa genome sequencing project

We describe the construction of a reference genetic linkage map for the Brassica A genome, which will form the backbone for anchoring sequence contigs for the Multinational Brassica rapa Genome Sequencing Project. Seventy-eight doubled haploid lines derived from anther culture of the F₁ of a cross between two diverse Chinese cabbage (B. rapa ssp. pekinensis) inbred lines, ‘Chiifu-401-42’ (C) and ‘Kenshin-402-43’ (K) were used to construct the map. The map comprises a total of 556 markers, including 278 AFLP, 235 SSR, 25 RAPD and 18 ESTP, STS and CAPS markers. Ten linkage groups were identified and designated as R1–R10 through alignment and orientation using SSR markers in common with existing B. napus reference linkage maps. The total length of the linkage map was 1,182 cM with an average interval of 2.83 cM between adjacent loci. The length of linkage groups ranged from 81 to 161 cM for R04 and R06, respectively. The use of 235 SSR markers allowed us to align the A-genome chromosomes of B. napus with those of B. rapa ssp. pekinensis. The development of this map is vital to the integration of genome sequence and genetic information and will enable the international research community to share resources and data for the improvement of B. rapa and other cultivated Brassica species. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

An integrated and comparative genetic map of the turkey genome

An integrated genetic linkage map was developed for the turkey (Meleagris gallopavo) that combines the genetic markers from the three previous mapping efforts. The UMN integrated map includes 613 loci arranged into 41 linkage groups. An additional 105 markers are tentatively placed within linkage groups based on two-point LOD scores and 19 markers remain unlinked. A total of 210 previously unmapped markers has been added to the UMN turkey genetic map. Markers from each of the 20 linkage groups identified in the Roslin map and the 22 linkage groups of the Nte map are incorporated into the new integrated map. Overall map distance contained within the 41 linkage groups is 3,365 cM (sex-averaged) with the largest linkage group (94 loci) measuring 533.1 cM. Average marker interval for the map was 7.86 cM. Sequences of markers included in the new map were compared to the chicken genome sequence by 'BLASTN'. Significant similarity scores were obtained for 95.6% of the turkey sequences encompassing an estimated 91% of the chicken genome. A physical map of the chicken genome based on positions of the turkey sequences was built and 36 of the 41 turkey linkage groups were aligned with the physical map, five linkage groups remain unassigned. Given the close similarities between the turkey and chicken genomes, the chicken genome sequence could serve as a scaffold for a genome sequencing effort in the turkey.     

A preliminary microsatellite genetic map of the ostrich (Struthio camelus)

Molecular genetic maps can provide information for the identification and localization of major genes associated with quantitative traits. However, there are currently no published genetic linkage maps for any ratites. Herein, a preliminary genetic map of ostrich was developed using a two-generation ostrich reference family by linkage analysis of 104 polymorphic microsatellite markers, including 40 novel markers reported in this study. A total of 35 microsatellite markers were placed into 13 linkage groups. Five linkage groups are composed of three or more loci, whereas the remaining eight groups each contained two markers. The sex-averaged map spans 365.4 cM. The marker interval of each linkage group ranges from 5.3 to 25.4 cM, and the average interval distance is 16.61 cM. The male map covers 342.7 cM, with an average intermarker distance of 15.58 cM, whereas the female map is 456.7 cM, with the average intermarker spacing of 20.76 cM. In order to screen the orthologous loci between ostrich and chicken, all of the flanking sequences of the 104 polymorphic loci, nine monomorphic loci and a further 12 reported microsatellite loci for ostrich were screened against the chicken genomic sequence using the BLAST algorithm (Altschul et al., 1990), and corresponding orthologs were found for 13 sequences. The microsatellite loci and genetic map developed in this study will be useful for QTL mapping, population genetics and phylogenetic studies in the ratite. In addition, the 13 orthologous loci identified in this study will be advantageous to the construction of a comparative genetic map between chicken and ostrich.