The sarcoplasmic reticulum Ca2+-ATPase

Summary This review summarizes studies on the structural organization of Ca²⁺-ATPase in the sarcoplasmic reticulum membrane in relation to the function of the transport protein. Recent advances in this field have been made by a combination of protein-chemical, ultrastructural, and physicochemical techniques on membraneous and detergent solubilized ATPase. A particular feature of the ATPase (Part I) is the presence of a hydrophilic head, facing the cytoplasm, and a tail inserted in the membrane. In agreement with this view the protein is moderately hydrophobic, compared to many other integral membrane proteins, and the number of traverses of the 115 000 Dalton peptide chain through the lipid may be limited to 3–4.There is increasing evidence (Part II) that the ATPase is self-associated in the membrane in oligomeric form. This appears to be a common feature of many transport proteins. Each ATPase peptide seems to be able to perform the whole catalytic cycle of ATP hydrolysis and Ca²⁺ transport. Protein-protein interactions seem to have a modulatory effect on enzyme activity and to stabilize the enzyme against inactivation.Phospholipids (Part III) are not essential for the expression of enzyme activity which only requires the presence of flexible hydrocarbon chains that can be provided e.g. by polyoxyethylene glycol detergents. Perturbation of the lipid bilayer by the insertion of membrane protein leads to some immobilization of the lipid hydrocarbon chains, but not to the extent envisaged by the annulus hypothesis. Strong immobilization, whenever it occurs, may arise from steric hindrance due to protein-protein contacts. Recent studies suggest that breaks in Arrhenius plots of enzyme activity primarily reflect intrinsic properties of the protein rather than changes in the character of lipid motion as a function of temperature.     

Oligomerisation of sarcoplasmic reticulum Ca2+-ATPase monomers from skeletal muscle

The fast-twitch SERCA1 isoform of the sarcoplasmic reticulum Ca(2+)-ATPase was purified to homogeneity and conjugated to peroxidase. The SERCA1 probe showed high affinity binding to the immobilized monomeric enzyme, but not crosslinker-stabilized oligomers. This suggests a preferential complex formation via homo-dimerization, rather than interactions with established oligomeric structures.     

Hypochlorous acid inhibits Ca2+-ATPase from skeletal muscle sarcoplasmic reticulum

Favero, Terence G., David Colter, Paul F. Hooper, andJonathan J. Abramson. Hypochlorous acid inhibitsCa²⁺-ATPase from skeletal musclesarcoplasmic reticulum. J. Appl. Physiol. 84(2): 425-430, 1998.Hypochlorous acid(HOCl) is produced by polymorphonuclear leukocytes that migrate andadhere to endothelial cells as part of the inflammatory response totissue injury. HOCl is an extremely toxic oxidant that can react with avariety of cellular components, and concentrations reaching 200 µMhave been reported in some tissues. In this study, we show that HOClinteracts with the skeletal sarcoplasmic reticulumCa²⁺-adenosinetriphosphatase(ATPase), inhibiting transport function. HOCl inhibits sarcoplasmicreticulum Ca²⁺-ATPase activity ina concentration-dependent manner with a concentration required toinhibit ATPase activity by 50% of 170 µM and with completeinhibition of activity at 3 mM. A concomitant reduction infree sulfhydryl groups after HOCl treatment was observed, paralleling the inhibition of ATPase activity. It was also observed that HOCl inhibited the binding of the fluorescent probe fluoresceinisothiocyanate to the ATPase protein, indicating some structural damagemay have occurred. These findings suggest that the reactive oxygenspecies HOCl inhibits ATPase activity via a modification of sulfhydryl groups on the protein, supporting the contention that reactive oxygenspecies disrupt the normalCa²⁺-handling kinetics in musclecells.

     

Membrane crystals of Ca2+-ATPase in sarcoplasmic reticulum of developing muscle

The vanadate-induced crystallization of Ca2+-ATPase was analyzed on sarcoplasmic reticulum vesicles isolated between 10 and 28 days of development from pectoralis muscles of chicken. After exposure to Na3VO4 in a Ca2+-free medium, Ca2+-ATPase crystals begin to appear on portions of the surface of a few vesicles, isolated at 18 days of development. Thereafter, the number of vesicles containing Ca2+-ATPase crystals rapidly increases and after 1 week of postnatal development (28 days), it reaches the adult level of about 30% of the vesicle population. These observations are discussed with reference to the mechanism of Ca2+-ATPase crystallization and the regulation of sarcoplasmic reticulum biosynthesis.     

Physical coupling supports the local Ca2+ transfer between sarcoplasmic reticulum subdomains and the mitochondria in heart muscle

In many cell types, transfer of Ca(2+) released via ryanodine receptors (RyR) to the mitochondrial matrix is locally supported by high [Ca(2+)] microdomains at close contacts between the sarcoplasmic reticulum (SR) and mitochondria. Here we studied whether the close contacts were secured via direct physical coupling in cardiac muscle using isolated rat heart mitochondria (RHMs). "Immuno-organelle chemistry" revealed RyR2 and calsequestrin-positive SR particles associated with mitochondria in both crude and Percoll-purified "heavy" mitochondrial fractions (cRHM and pRHM), to a smaller extent in the latter one. Mitochondria-associated vesicles were also visualized by electron microscopy in the RHMs. Western blot analysis detected greatly reduced presence of SR markers (calsequestrin, SERCA2a, and phospholamban) in pRHM, suggesting that the mitochondria-associated particles represented a small subfraction of the SR. Fluorescence calcium imaging in rhod2-loaded cRHM revealed mitochondrial matrix [Ca(2+)] ([Ca(2+)](m)) responses to caffeine-induced Ca(2+) release that were prevented when thapsigargin was added to predeplete the SR or by mitochondrial Ca(2+) uptake inhibitors. Importantly, caffeine failed to increase [Ca(2+)] in the large volume of the incubation medium, suggesting that local Ca(2+) transfer between the SR particles and mitochondria mediated the [Ca(2+)](m) signal. Despite the substantially reduced SR presence, pRHM still displayed a caffeine-induced [Ca(2+)](m) rise comparable with the one recorded in cRHM. Thus, a relatively small fraction of the total SR is physically coupled and transfers Ca(2+) locally to the mitochondria in cardiac muscle. The transferred Ca(2+) stimulates dehydrogenase activity and affects mitochondrial membrane permeabilization, indicating the broad significance of the physical coupling in mitochondrial function.     

Heterologous expression of sarcoplasmic reticulum Ca2+-ATPase

In recent years, expression of rabbit sarcoplasmic reticulum (SR) Ca²⁺-ATPase in heterologous systems has been a widely used strategy to study altered enzymes generated by site-directed mutagenesis. Various eukaryotic expression systems have been tested, all of them yielding comparable amounts of recombinant protein. However, the relatively low yield of recombinant protein obtained so far suggests that novel purification techniques will be required to allow further characterization of this enzyme based on direct ligand-binding measurements.     

Occlusion of Ca2+ in soluble monomeric sarcoplasmic reticulum Ca2+-ATPase

Sarcoplasmic reticulum Ca2+-ATPase solubilized in monomeric form by nonionic detergent was reacted with CrATP in the presence of 45Ca2+. A Ca2+-occluded complex formed, which was stable during high performance liquid chromatography in the presence of excess non-radioactive Ca2+. The elution position corresponded to monomeric Ca2+-ATPase. It is concluded that a single Ca2+-ATPase polypeptide chain provides the full structural basis for Ca2+ occlusion.     

Crystallization of Ca2+-ATPase in detergent-solubilized sarcoplasmic reticulum

Microcrystalline arrays of Ca2+-transporting ATPase (EC 3.6.1.38) develop in detergent-solubilized sarcoplasmic reticulum upon exposure to 10-20 mM CaCl2 at pH 6.0 for several weeks at 2 degrees C, in a crystallization medium that preserves the ATPase activity for several months. Of 48 detergents tested, optimal crystallization was obtained with Brij 36T, Brij 56, and Brij 96 at a detergent:protein weight ratio of 4:1 and with octaethylene glycol dodecyl ether at a ratio of 2:1. Similar Ca2+-induced crystalline arrays were obtained with the purified or delipidated Ca2+-ATPase of sarcoplasmic reticulum but at lower detergent:protein ratios. The crystals are stabilized by fixation with glutaraldehyde and persist even after the removal of phospholipids by treatment with phospholipases A or C and by extraction with organic solvents. The crystals obtained so far can be used only for electron microscopy, but ongoing experiments suggest that under similar conditions large ordered arrays may develop that are suitable for x-ray diffraction analysis.     

The structure of the Ca2+-ATPase of sarcoplasmic reticulum

In this article the morphology of sarcoplasmic reticulum, classification of Ca(2+)-ATPase (SERCA) isoenzymes presented in this membrane system, as well as their topology will be reviewed. The focus is on the structure and interactions of Ca(2+)-ATPase determined by electron and X-ray crystallography, lamellar X-ray and neutron diffraction analysis of the profile structure of Ca(2+)-ATPase in sarcoplasmic reticulum multilayers. In addition, targeting of the Ca(2+)-ATPase to the sarcoplasmic reticulum is discussed.     

Measurement of sarcoplasmic reticulum Ca2+-ATPase activity and E-type Mg2+-ATPase activity in rat heart homogenates

The presence of a high and nonlinear Ca2+-independent (or basal) ATPase activity in rat heart preparations makes difficult the reliable measurement of sarcoplasmic reticulum (SR) Ca2+-ATPase activity by usual methods. A spectrophotometric assay for the accurate determination of SR Ca2+-ATPase activity in unfractionated homogenates from rat heart is described. The procedure is based on that reported by Simonides and van Hardeveld (1990, Anal. Biochem. 191, 321-331) for skeletal muscle homogenates. To avoid overestimation of the Ca2+-ATPase activity of cardiac homogenates that occurs when sequential measurements of total and basal ATPase activities are performed, two parallel and independent assays are required: one with low (micromolar) and other high (millimolar) calcium concentration. Addition of thapsigargin (0.2 microM) blocked totally the activity considered as Ca2+-ATPase activity. Using this method, the rat heart homogenate Ca2+-ATPase activity was 10.5 +/- 2.0 micromol. min-1 x g-1 tissue wet weight (n = 8). Likewise, a spectrophotometric assay for measuring E-type Mg2+-ATPase activity in cardiac total homogenates has been developed, comparing the following characteristics of the enzymatic activity in homogenate and a membrane-enriched fraction: first-order rate constant for ATP-dependent inactivation, Km for ATP, and effects of concanavalin A, Triton X-100, and specific inhibitors.     

Distances between the functional sites of the (Ca2+ + Mg2+)-ATPase of sarcoplasmic reticulum

Luminescence energy transfer measurements have been used to determine the distances between the two high affinity Ca2+ binding-transport sites of the (Ca2+ + Mg2+)-ATPase of skeletal muscle sarcoplasmic reticulum. The lanthanide Tb3+ situated at one high affinity Ca2+ site was used as the transfer donor, and acceptors at the other Ca2+ site were the lanthanides Nd3+, Pr3+, Ho3+, or Er3+. Terbium bound to the enzyme was excited directly with a pulsed dye laser. Analysis of the changes in the terbium luminescence lifetime due to the presence of the acceptor indicates that the distance between the Ca2+ sites is 10.7 A. The distance between the Ca2+ sites and the nucleotide-binding catalytic site was determined using Tb3+ at the Ca2+ sites and either trinitrophenyl nucleotides (TNP-N) or fluorescein 5-isothiocyanate (FITC) in the catalytic site as energy acceptors. The R0 values for the Tb-acceptor pairs are approximately 30 and approximately 40 A for TNP-N and FITC, respectively. The distance between Tb3+ at the Ca2+ sites and TNP-ATP at the nucleotide site is approximately 35 A and that between the Ca2+ sites and the FITC labeling site is approximately 47 A. Considerations of the molecular dimensions of the ATPase polypeptide indicate that while the two Ca2+ sites are close to each other, the Ca2+ sites and the nucleotide site are quite remote in the three-dimensional structure of the enzyme.     

Characterization and expression of the rat heart sarcoplasmic reticulum Ca2+-ATPase mRNA

Sarcoplasmic reticulum Ca2+-ATPase cDNA clones have been isolated from an adult rat heart cDNA library and the nucleotide sequence of the Ca2+-ATPase mRNA determined. The sequence has an open reading frame of 997 codons. It is identical to a cDNA isolated from a rat stomach cDNA library and 90% isologous to the rabbit and human slow/cardiac cDNAs. Nuclease S1 mapping analysis indicates that this sequence corresponds to the main Ca2+-ATPase mRNA present in heart and in slow skeletal muscle and that it is expressed in various proportions in smooth and non-muscle tissues, together with another isoform which differs from the cardiac form in the sequence of its 3'-end.     

Effective reconstitution of sarcoplasmic reticulum Ca2+-ATPase using lubrol PX]

Ca2(+)-ATPase of sarcoplasmic reticulum was reconstituted in the proteoliposomes by the salting out procedure. Triton X-100, C12E8 and Lubrol PX were used for the solubilization of the Ca2(+)-ATPase. Using fluorescent probes (diS-C3-(5), chlortetracycline) as well pH-measuring method, the functional of the reconstituted Ca2(+)-ATPase was comparatively studied in three types of proteoliposomes. The efficiency of Ca2(+)-ATPase grew in the following detergent order: Triton X-100, C12E8, Lubrol PX.     

Labeling the Ca2+-ATPase of skeletal muscle sarcoplasmic reticulum with maleimidylsalicylic acid

Maleimidylsalicylic acid reacts with the Ca(2+)-ATPase of skeletal muscle sarcoplasmic reticulum with high affinity and inhibits the ATPase activity following a pseudo-first-order kinetic with a rate constant of 8.3 m(-1) s(-1). Calcium binding remains unaffected in the maleimide-inhibited ATPase. However, the presence of ATP, ADP, and, to a lesser extent, AMP protects the enzyme against inhibition. Furthermore, ATPase inhibition is accompanied by a concomitant decrease in ATP binding. The stoichiometry of the nucleotide-dependent maleimidylsalicylic acid binding is 6-10 nmol/mg ATPase, which corresponds to the binding of up to one molecule of maleimide/molecule of ATPase. The stoichiometry of maleimide binding is decreased in the presence of nucleotides and in the ATPase previously labeled with fluorescein-5'-isothiocyanate or N-ethylmaleimide A fluorescent peptide was isolated by high performance liquid chromatography after trypsin digestion of the maleimide-labeled ATPase. Analysis of the sequence and mass spectrometry of the peptide leads us to propose Cys(344) as the target for maleimidylsalicylic acid in the inhibition reaction. The effect of Cys(344) modification on the nucleotide site is discussed.     

Inhibition of sarcoplasmic reticulum Ca2+-ATPase by miconazole

The inhibition of sarcoplasmic reticulumCa²⁺-ATPase activity by miconazole was dependent on theconcentration of ATP and membrane protein. Half-maximal inhibition wasobserved at 12 µM miconazole when the ATP concentration was 50 µMand the membrane protein was 0.05 mg/ml. When ATP was 1 mM, a lowmicromolar concentration of miconazole activated the enzyme, whereashigher concentrations inhibited it. A qualitatively similar responsewas observed when Ca²⁺ transport was measured. Likewise,the half-maximal inhibition value was higher when the membraneconcentration was raised. Phosphorylation studies carried out aftersample preequilibration in different experimental settings shed lighton key partial reactions such as Ca²⁺ binding and ATPphosphorylation. The miconazole effect on Ca²⁺-ATPaseactivity can be attributed to stabilization of theCa²⁺-free enzyme conformation giving rise to a decrease inthe rate of the Ca²⁺ binding transition. The phosphoryltransfer reaction was not affected by miconazole.

     

Ca2+-ATPase from sarcoplasmic reticulum: acylphosphatase activity

Fractionation of sarcoplasmic reticulum vesicles from rabbit skeletal muscle was performed by solubilization of the vesicles in the presence of deoxycholate, followed by sucrose density gradient centrifugation and gel filtration chromatography. This procedure permitted the isolation of essentially pure Ca²⁺-ATPase; this enzyme showed ATPase as well as acylphosphatase activity, both activities being clearly enhanced by deoxycholate. The acylphosphatase activity of the purified Ca²⁺-ATPase was characterized with regard to some kinetic properties, such as pH, Mg²⁺, Ca²⁺, and deoxycholate dependence, and substrate affinity, determined in the presence of acetylphosphate, succinylphosphate, carbamylphosphate, and benzoylphosphate; in addition, the stability of both activities was checked in time-course experiments. The main similarities between the two activities, such as the Mg²⁺ requirement, the deoxycholate activation, and the pH dependence, together with the competitive inhibition of the benzoylphosphatase activity by ATP, the inhibition of both activities by tris(bathophenanthroline)-Fe²⁺, and the relief of this inhibitory effect by carbonylcyanide-4-trifluoromethoxyphenyl hydrazone support the hypothesis that acylphosphatase and ATPase activities of sarcoplasmic reticulum vesicles reside in the same active site of the enzyme. With regard to possible relationships between acylphosphatase activity of the purified Ca²⁺-ATPase and “soluble” acylphosphatase present in the 100,000g supernatant fraction, comparison of some kinetic and structural parameters indicate that these two activities are supported by quite different enzymes.     

Interaction of amphipols with sarcoplasmic reticulum Ca2+-ATPase

Amphipols are short-chain amphipathic polymers designed to keep membrane proteins soluble in aqueous solutions. We have evaluated the effects of the interaction of amphipols with sarcoplasmic reticulum Ca(2+)-ATPase either in a membrane-bound or a soluble form. If the addition of amphipols to detergent-solubilized ATPase was followed by removal of detergent, soluble complexes formed, but these complexes retained poor ATPase activity, were not very stable upon long incubation periods, and at high concentrations they experienced aggregation. Nevertheless, adding excess detergent to diluted detergent-free ATPase-amphipol complexes incubated for short periods immediately restored full activity to these complexes, showing that amphipols had protected solubilized ATPase from the rapid and irreversible inactivation that otherwise follows detergent removal. Amphipols also protected solubilized ATPase from the rapid and irreversible inactivation observed in detergent solutions if the ATPase Ca(2+) binding sites remain vacant. Moreover, in the presence of Ca(2+), amphipol/detergent mixtures stabilized concentrated ATPase against inactivation and aggregation, whether in the presence or absence of lipids, for much longer periods of time (days) than detergent alone. Our observations suggest that mixtures of amphipols and detergents are promising media for handling solubilized Ca(2+)-ATPase under conditions that would otherwise lead to its irreversible denaturation and/or aggregation.     

Inhibition of sarcoplasmic reticulum Ca2+-ATPase by 2-mercaptoethanol

The Ca²⁺-dependent ATPase activity of sarcoplasmic reticulum was inhibited when membrane vesicles were incubated at 0°C in presence of thiols. 2-mercaptoethanol was the most effective inhibitor from the thiols tested. The effect of 2-mercaptoethanol on the ATPase activity was biphasic; enzyme inhibition originally increased and then decreased with increasing thiol concentration. The inhibitory action of this thiol was significantly higher at low membrane concentrations and the rate of inactivation at 22°C was considerably lower than that at 0°C. Ca²⁺-ATPase previously inhibited by 2-mercaptoethanol was partially reactivated by incubation with periodate.