A site-specific recombinase (RinQ) is required to exert incompatibility towards the symbiotic plasmid of Rhizobium etli

The replication/partition region of the symbiotic plasmid p42d of Rhizobium etli CE3 is characterized by the presence of the repABC operon. A recombinant plasmid containing this region is able to replicate in a R. etli derivative cured from p42d, with the same stability and copy number shown by the parental plasmid. However, when this construct is introduced into the wild-type strain, instead of exerting incompatibility against the p42d, it forms a stable cointegrate with it. In this paper, we show that a site-specific resolvase, and its action sites are essential factors to displace the symbiotic p42d. We propose a model for this novel incompatibility mechanism.     

The expression of a novel antisense gene mediates incompatibility within the large repABC family of alpha-proteobacterial plasmids

Large extrachromosomal replicons in many members of the alpha-proteobacteria encode genes that are required for plant or animal pathogenesis or symbiosis. Most of these replicons encode repABC genes that control their replication and faithful segregation during cell division. In addition to its chromosome, the plant endosymbiont Sinorhizobium meliloti also maintains the 1.4 Mb pSymA and 1.7 Mb pSymB symbiotic megaplasmids both of which are repABC-type replicons. In all repABC loci that have been characterized, an apparently untranslated intergenic region between the repB and repC genes encodes a strong incompatibility determinant (referred to as incalpha). Here we report the isolation of mutations within the incalpha regions of pSymA and pSymB that eliminate incompatibility. These mutations map to and inactivate a promoter in the intergenic region that drives the expression of an approximately 56 nucleotide untranslated RNA molecule that mediates incompatibility. This gene, that we have named incA, is transcribed antisense to the repABC genes. Our analysis suggests that the incA gene is conserved in repABC loci from a diverse spectrum of bacteria.     

Polar localization of replicon origins in the multipartite genomes of Agrobacterium tumefaciens and Sinorhizobium meliloti

The origins of replication of many different bacteria have been shown to reside at specific subcellular locations, but the mechanisms underlying their positioning and segregation are still being elucidated. In particular, little is known about the replication of multipartite genomes in bacteria. We determined the cellular positions of the origins of the replicons in the alpha proteobacteria Agrobacterium tumefaciens and Sinorhizobium meliloti and found that they are located at the poles of the cells. Our work demonstrates the conserved extreme polar localization of circular chromosome origins in these alpha proteobacteria and is also the first to specify the cellular location of origin regions from the repABC family. The cellular location of a derivative of the RK2 plasmid is distinct from that of the alpha proteobacterium genomic replicon origins but is conserved across bacteria. Colocalization experiments with the genomic replicons of A. tumefaciens revealed that the repABC replicons, although preferentially positioned at the cell pole, colocalize only rarely. For the repABC replicons in this organism, occupying discrete spatial locations may contribute to their coexistence and stable inheritance.     

The repABC plasmid family

repABC plasmids are widely distributed among alpha-proteobacteria. They are especially common in Rhizobiales. Some strains of this bacterial order can contain multiple repABC replicons indicating that this plasmid family includes several incompatibility groups. The replication and stable maintenance of these replicons depend on the presence of a repABC operon. The repABC operons sequenced to date share some general characteristics. All of them contain at least three protein-encoding genes: repA, repB and repC. The first two genes encode proteins involved in plasmid segregation, whereas repC encodes a protein crucial for replication. The origin of replication maps within the repC gene. In contrast, the centromere-like sequence (parS) can be located at various positions in the operon. In this review we will summarize current knowledge about this plasmid family, with special emphasis on their structural diversity and their complex genetic regulation. Finally, we will examine some ideas about their evolutionary origin and trends.     

The RepA and RepB autorepressors and TraR play opposing roles in the regulation of a Ti plasmid repABC operon

The replicator regions of the Ti plasmids of Agrobacterium tumefaciens belong to the repABC family of replication and partitioning systems, members of which are widely distributed among alpha proteobacteria. In the region upstream of the octopine-type Ti plasmid repABC operon, three promoters were recently shown to be activated by the LuxR-type regulator TraR. Activation of these promoters by TraR led to enhanced rep gene expression and increased Ti plasmid copy number. Here we describe a fourth promoter, designated P4. This promoter lies directly upstream of repA and is not regulated by TraR. The promoter was localized by subcloning and demonstrated to be strongly autorepressed. RepA is the major cis-acting autorepressor of this promoter, though RepB enhanced repression and was essential for RepA-mediated repression in trans. Purified RepA bound to an approximately 70-nucleotide operator site overlapping the P4 promoter and extending well downstream. Binding affinity was increased by adenosine di- and tri-phosphates and also by purified RepB. Activation of P1, P2, and P3 enhanced the activity of P4, suggesting that P4 somehow communicates with the upstream promoters. These findings demonstrate that both autoinduction and autorepression play critical and opposing roles in regulating repABC expression and hence in the replication, stability and copy number of the Ti plasmid.     

Comparative characterization of repABC-type replicons of Paracoccus pantotrophus composite plasmids

The repABC replicons have an unusual structure, since they carry genes coding for partitioning (repA, repB) and replication (repC) proteins, which are organized in an operon. So far, the presence of these compact bi-functional modules has been reported only in the megaplasmids of the Rhizobiaceae and within the plasmid pTAV1 (107kb) of Paracoccus versutus. We studied the distribution of repABC-type replicons within bacteria belonging to the genus Paracoccus. We found that repABC replicons occur only in the group of pTAV1-like plasmids: pKLW1, pHG16-a, pWKS2, and pPAN1, harbored by different strains of Paracoccus pantotrophus. A partial sequencing approach followed by phylogenetic analysis revealed that these replicons constitute a distinct evolutionary branch of repABC replicons. Incompatibility studies showed that they represent two incompatibility groups designated IncABC1 (pTAV1, pKLW1, and pHG16-a) and IncABC2 (pPAN1). Sequence comparison using available databases allowed the identification, within plasmid pRS241d of Rhodobacter sphaeroides 2.4.1, of an additional sequence highly homologous to the paracoccal repABC replicons, which has been included in comparative analyses.     

Characterization of the replication origin of the myxobacterial self-replicative plasmid pMF1

Thus far, pMF1 is the only endogenous myxobacterial plasmid whose replication mechanism is unclear. In this study, we determined that the plasmid replicates via the theta-mode. The pMF1.14 gene, located in the pMF1.13-pMF1.15 operon (repABC), encodes an essential replication initiation protein that was predicted to have no typical DNA/protein binding motifs but contains rich disordered regions. The pMF1 replication-related essential cis-acting DNA region, approximate 370bp, was located within pMF1.14, and was found to contain several directly and inverted atypical repeats. The unique characteristics of the pMF1 replicon are suggested to be the reason for its strict narrow host range in Myxococcus cells.     

Identification of a megaplasmid centromere reveals genetic structural diversity within the repABC family of basic replicons

The basic replication unit of many plasmids and second chromosomes in the alpha-proteobacteria consists of a repABC locus that encodes the trans- and cis-acting components required for both semiautonomous replication and replicon maintenance in a cell population. In terms of physical genetic organization and at the nucleotide sequence level, repABC loci are well conserved across various genera. As with all repABC-type replicons that have been genetically characterized, the 1.4 Mb pSymA and 1.7 Mb pSymB megaplasmids from the plant endosymbiont Sinorhizobium meliloti encode strong incompatibility (inc) determinants. We have identified a novel inc sequence upstream of the repA2 gene in pSymA that is not present on pSymB and not reported in other repABC plasmids that have been characterized. This region, in concert with the repA and repB genes, stabilizes a test plasmid indicating that it constitutes a partitioning (par) system for the megaplasmid. Purified RepB binds to this sequence and binding may be enhanced by RepA. We have isolated 19 point mutations that eliminate incompatibility, reduce RepB binding or the stabilization phenotype associated with this sequence and all of these map to a 16-nucleotide palindromic sequence centred 330 bp upstream of the repA2 gene. An additional five near-perfect repeats of this palindrome are located further upstream of the repA2 gene and we show that they share some conservation with known RepB binding sites in different locations on other repABC plasmids and to two sequences found on the tumour inducing plasmid of Agrobacterium tumefaciens. These additional palindromes also bind RepB but one of them does not display obvious incompatibility effects. A heterogenic distribution of par sequences demonstrates unexpected diversity in the structural genetic organization of repABC loci, despite their obvious levels of similarity.     

Cell-cell signaling and the Agrobacterium tumefaciens Ti plasmid copy number fluctuations

The Agrobacterium tumefaciens oncogenic Ti plasmids replicate and segregate to daughter cells via repABC cassettes, in which repA and repB are plasmid partitioning genes and repC encodes the replication initiator protein. repABC cassettes are encountered in a growing number of plasmids and chromosomes of the alpha-proteobacteria, and findings from particular representatives of agrobacteria, rhizobia and Paracoccus have began to shed light on their structure and functions. Amongst repABC replicons, Ti plasmids and particularly the octopine-type Ti have recently stood as model in regulation of repABC basal expression, which acts in plasmid copy number control, but also appear to undergo pronounced up-regulation of repABC, upon interbacterial and host-bacterial signaling. The last results in considerable Ti copy number increase and collective elevation of Ti gene expression. Inhibition of the Ti repABC is in turn conferred by a plant defense compound, which primarily affects Agrobacterium virulence and interferes with cell-density perception. Altogether, the above suggest that the entire Ti gene pool is subjected to the bacterium-eukaryote signaling network, a phenomenon quite unprecedented for replicons thought of as stringently controlled. It remains to be seen whether similar copy number variations characterize related replicons or if they are of even broader significance in plasmid biology.     

Replication regions of Sinorhizobium meliloti plasmids

The replication (rep) regions of small plasmids from three Sinorhizobium meliloti strains were cloned by marker rescue. Two unique replication regions were identified, one of which was common to two different strains. Plasmid pBB83 carried a 7.2 kbp rep region from a 42 kbp plasmid, and pBB84 carried a 4.5 kbp rep region from a 36 kbp plasmid. The cloned rep regions were of different compatibility types, and were capable of displacing their parent plasmids from S. meliloti. Neither could function in a PolA- strain of Escherichia coli. The cloned replication regions were less stable in S. meliloti than their parent plasmids. The rep genes for each plasmid were localized to less than 2.5 kbp segments. Sequencing data revealed that the pBB83 Rep protein is uncommon, with partial identity to a protein encoded by a plasmid from S. meliloti GR4 [Mercado-Blanco, J., Olivares, J., 1994. The large nonsymbiotic plasmid pRmeGR4a of Rhizobium meliloti GR4 encodes a protein involved in replication that has homology with the RepC protein of Agrobacterium plasmids. Plasmid 32, 75-79]. However, the cloned DNA fragment also contains a truncated segment of the common repABC genes, suggesting that the parent plasmid contained two sets of replication genes. Other genes and an IS-element within the insert are most closely related to sequences derived from the Rhizobiaceae family, suggesting that the plasmid has a limited host range. In contrast, the pBB84 rep region contained genes similar to those associated with several broad host-range plasmids, and its Rep protein is related to that of a Pseudomonas aeruginosa broad host-range plasmid, pVS1 [Heeb, S., Itoh, Y., Nishijyo, T., Schnider, U., Keel, C., Wade, J., Walsh, U., O'Gara, F., Haas, D., 2000. Small, stable shuttle vectors based on the minimal pVS1 replicon for use in gram-negative, plant-associated bacteria. Mol. Plant-Microbe Interact. 13, 232-237]. The pBB84 rep region also includes a probable origin of replication, consisting of DNA boxes flanking a series of direct repeats and an AT-rich sequence.     

Structural elements required for replication and incompatibility of the Rhizobium etli symbiotic plasmid

The symbiotic plasmid of Rhizobium etli CE3 belongs to the RepABC family of plasmid replicons. This family is characterized by the presence of three conserved genes, repA, repB, and repC, encoded by the same DNA strand. A long intergenic sequence (igs) between repB and repC is also conserved in all members of the plasmid family. In this paper we demonstrate that (i) the repABC genes are organized in an operon; (ii) the RepC product is essential for replication; (iii) RepA and RepB products participate in plasmid segregation and in the regulation of plasmid copy number; (iv) there are two cis-acting incompatibility regions, one located in the igs (incalpha) and the other downstream of repC (incbeta) (the former is essential for replication); and (v) RepA is a trans-acting incompatibility factor. We suggest that incalpha is a cis-acting site required for plasmid partitioning and that the origin of replication lies within incbeta.     

The plasmid-maintenance functions of the P7 prophage

The region responsible for the maintenance of the prophage of bacteriophage P7 as a stable, unit-copy plasmid was isolated in a lambda att vector which lysogenizes Escherichia coli as a stable unit-copy plasmid under the control of the P7 replication origin. The P7 plasmid-maintenance region was shown to consist of adjacent replication and partition regions capable of functioning independently. The isolated replication region could support plasmid maintenance but the resulting plasmids were highly unstable unless the partition region was also included. Stable composite plasmids were isolated containing the putative P7 partition region and the origin of replication of the unrelated plasmid F, indicating that P7 encoded an active partition mechanism. The replication regions of P7 and P1 were shown to be highly homologous but the partition regions of the two plasmids appear to be unrelated in sequence. The incompatibility determinants associated with the two replication regions showed the same specificity, whereas the partition-region incompatibility determinants were different, showing no cross-specificity.     

Identification of pTi-SAKURA DNA region conferring enhancement of plasmid incompatibility and stability

In Agrobacterium tumefaciens, the stability of Ti plasmids differs depending on the strain. So far, little is known about genes that cause the difference in stability. The repABC operon is responsible for replication and incompatibility of Ti plasmids. We constructed recombinant plasmids carrying the repABC operon and different portions of pTi-SAKURA. Cells having the recombinant plasmids that harbored a 2.6-kbp NheI fragment of pTi-SAKURA were found to be transformed via conjugation 100-fold less frequently with a small incompatible repABC plasmid than cells having the recombinant plasmids lacking the 2.6-kbp NheI fragment. Since the phenomenon occurred only when the resident and incoming plasmids belonged to the same incompatibility group, it was suggested that the 2.6-kbp NheI fragment bears the potential enhancing incompatibility. The fragment contained an operon consisting of two open reading frames, tiorf24 and tiorf25. tiorf24 is an orphan gene, whereas tiorf25 is a homologue of a group of plasmid stability genes. Removal of the 2.6-kbp fragment from the resident pTi-SAKURA increased the resident plasmid ejection ratio by the incoming repABC plasmid, whereas addition of the fragment to pTiC58 decreased the ejection ratio, and the loss ratio during growth at 37 degrees C. These data suggest that tiorf24 and tiorf25 are responsible for the stability of pTi-SAKURA, and reduce, in the host bacterium, the frequency of ejection of the resident plasmid, presumably through an incompatibility mechanism.