Preparation of chitosan derivative with polyethylene glycol side chains for porous structure without specific processing technique

The graft copolymer, chitosan-g-polyethylene glycol (PEG), was prepared through graft polymerization of PEG chains to chitosan due to the esterification reaction between PEG and 6-O-succinate-N-phthaloyl-chitosan (PHCSSA). The graft copolymer with porous structure was observed from scanning electron micrographs. It is a potential method to combine chitosan with the hydrophilic synthetic polymers. The graft reaction was carried out in homogeneous system and yielded copolymers with high grafting content. FTIR, NMR, XRD, DSC, spectrofluorophotometer and SEM were detected to characterize the copolymer.     

Thiol-yne and thiol-ene "click" chemistry as a tool for a variety of platinum drug delivery carriers, from statistical copolymers to crosslinked micelles

Statistical and block copolymers based on poly(2-hydroxyethyl methacrylate) (PHEMA) and poly[oligo(ethylene glycol) methylether methacrylate] (POEGMEMA) were modified with 4-pentenoic anhydride or 4-oxo-4-(prop-2-ynyloxy)butanoic anhydride to generate polymers with pendant vinyl or acetylene, respectively. Subsequent thiol-ene or thiol-yne reaction with thioglycolic acid or 2-mercaptosuccinic acid leads to polymers with carboxylate functionalities, which were conjugated with cisplatin (cis-diamminedichloroplatinum(II) (CDDP)) to generate a drug carrier for Pt-drugs. Only the polymers modified with 2-mercaptosuccinic acid resulted in the formation of soluble well-defined polymers with gel formation being prevented. Due to the hydrophobicity of the drug, the block copolymers took on amphiphilic character leading to micelle formation. The micelles were in addition crosslinked to further stabilize their structure. Pt-containing statistical copolymer, micelles, and crosslinked micelles were then tested regarding their cellular uptake by the A549 lung cancer cell line to show a superior uptake of crosslinked micelles. However, due to the better Pt release of the statistical copolymer, the highest cytotoxicity was observed with this type of polymer architecture.     

Synthesis and characterisation of chitosan-graft-poly(OEGMA) copolymers prepared by ATRP

Two synthetic routes, “grafting-from” and “grafting-to” the chitosan backbone, were investigated to prepare chitosan-graft-poly(OEGMA) copolymers by ATRP. The copolymers were characterised by ¹H NMR and FT-IR spectroscopy, elemental analyses and GPC. Estimates of the degree of grafting were quantitatively found from integration of the ¹H NMR spectra. The GPC data indicated that the hydrodynamic volumes of the polymers were significantly altered by the incorporation of poly(OEGMA). A comparison of the two synthetic methods showed differences in the ratio of synthetic and natural polymers present in the resulting combs. The “grafting-to” synthetic route was preferable as the polymers were of higher purity and more defined.     

Synthesis, characterization, and evaluation as transfection reagents of double-hydrophilic star copolymers: effect of star architecture

Five star polymers of the ionizable hydrophilic 2-(dimethylamino)ethyl methacrylate (DMAEMA) and the nonionic hydrophilic methoxy hexa(ethylene glycol) methacrylate (HEGMA) were prepared by group transfer polymerization (GTP) using ethylene glycol dimethacrylate (EGDMA) as coupling agent. In particular, four isomeric star copolymers, one heteroarm, two star block and one statistical star, with 90% mol DMAEMA and 10% mol HEGMA, plus one star homopolymer of DMAEMA with degrees of polymerization of the arms equal to 20 were synthesized. The polymers were characterized in terms of their molar masses (MMs) and compositions using gel permeation chromatography (GPC) and proton nuclear magnetic resonance (1H NMR) spectroscopy, respectively. The hydrodynamic diameters in water indicated some aggregation for all the star polymers except for the statistical copolymer star, while the pK values of the DMAEMA units were around 7 for all star polymers. All the star polymers were evaluated for their ability to transfect human cervical HeLa cancer cells with the modified plasmid pRLSV40 bearing the enhanced green fluorescent protein (EGFP) as the reporter gene. All four star copolymers showed decreased toxicity compared to that of the DMAEMA star homopolymer for the same amounts of star polymer tested. The star block copolymer with outer DMAEMA blocks exhibited the highest overall transfection efficiency, 11%, compared to that of all the star polymers examined in this study. This efficiency was the same as that of the commercially available transfection reagent SuperFect.     

Synthesis and characterization of multiblock copolymers based on spider dragline silk proteins

Spider dragline silk with its superlative tensile properties provides an ideal system to study the relationship between morphology and mechanical properties of a structural protein. Accordingly, we synthesized two hybrid multiblock copolymers by condensing poly(alanine) [(Ala)(5)] blocks of the structural proteins (spidroin MaSp1 and MaSp2) of spider dragline silk with different oligomers of isoprene (2200 and 5000 Da) having reactive end groups. The synthetic multiblock polymer displayed similar secondary structure to that of natural spidroin, the peptide segment forming a beta-sheet structure. These multiblock polymers showed a significant solubility in the component solvents. Moreover, the copolymer which contains the short polyisoprene segment would aggregate into a micellar-like structure, as observed by TEM.     

Synthesis and characterization of polymeric soybean oil-g-methyl methacrylate (and n-butyl methacrylate) graft copolymers: biocompatibility and bacterial adhesion

Peroxidation, epoxidation, and/or perepoxidation reactions of soybean oil under air at room temperature resulted in cross-linked polymeric soybean oil peroxides on the surface along with the waxy soluble part, sPSB, with a molecular weight of 4690, containing up to 2.3 wt % peroxide. This soluble polymeric oil peroxide, sPSB, initiated the free radical polymerization of either methyl methacrylate (MMA) or n-butyl methacrylate (nBMA) to give PSB-g-PMMA and PSB-g-PnBMA graft copolymers. The polymers obtained were characterized by (1)H NMR, thermogravimetric analysis, differential scanning calorimetry, and gel permeation chromatography techniques. Polymeric oil as a plasticizer lowered the glass transition of the PSB-g-PMMA graft copolymers. PSB-g-PMMA and PSB-g-PnBMA graft copolymer film samples were also used in cell culture studies. Fibroblast and macrophage cells were strongly adhered and spread on the copolymer film surfaces, which is important in tissue engineering. Bacterial adhesion on PSB-g-PMMA graft copolymer was also studied. Both Staphylococcus epidermidis and Escherichia coli adhered on the graft copolymer better than on homo-PMMA. Furthermore, the latter adhered much better than the former.     

Glycine derived polymerizable cosurfactant in the synthesis of functionalized poly(butyl acrylate) nanolatexes

The approach of employing N-glycinylmaleamic acid (NGMA) as an efficient cosurfactant to provide microemulsion polymerization of butyl acrylate using a weight ratio of sodium dodecyl sulfate (SDS)/butyl acrylate (BA) at 相似文献   

Preparation, characterization, and properties of chitosan-g-poly(vinyl alcohol) copolymer

The graft copolymer chitosan-g-poly(vinyl alcohol), with nontoxicity, biodegradability, and biocompatibility, was prepared by a novel method. The copolymer with porous net structure was observed by scanning electron microscopy (SEM). It is a potential method to combine chitosan with the synthetic polymers. The grafting reactions were conducted with various poly(vinyl alcohol) (PVA)/6-O-succinate-N-phthaloyl-chitosan (PHCSSA) feed ratios to obtain chitosan-g-poly(vinyl alcohol) copolymers with various PVA contents. The chemical structure of the chitosan-g-poly(vinyl alcohol) was characterized by Fourier transform infrared and nuclear magnetic resonance (NMR) spectroscopy. Differential scanning calorimetry (DSC), X-ray diffraction (XRD), and SEM were also detected to characterize the copolymer.     

Influence of polymer structure on adsorption behavior at solid–liquid interface by Monte Carlo simulation

Monte Carlo simulations for the adsorption of polymers including random copolymer, homopolymer, diblock copolymer and two kinds of triblock copolymers, respectively, in nonselective solvent at solid–liquid interface have been performed on a simple lattice model. The effect of polymer structure on adsorption properties was examined. In simulations, all polymeric molecules are modeled as self-avoiding linear chains composed of two segments A and B while A is attractive to the surface and B is non-attractive. It was found that for all polymers, the size distribution of various configurations is determined by the linked sequence of segments and the interaction energy between segment and surface. The results of simulation show that the adsorbed amount always increases with increasing bulk concentration but the adsorption layer thickness is mostly dependent on the adsorption energy at a fixed fraction of segments A. On the other hand, diblock copolymer has always the highest surface coverage and adsorbed amount, while random copolymers and homopolymers give generally the smallest surface coverage and adsorbed amount. It is shown that the sequence of polymer chains, i.e. molecular structure, is the most important factor in affecting adsorption properties at the same composition and interaction between segment and surface. The results also show that the adsorption behavior of random copolymers is remarkably different from that of block copolymers, but acting like homopolymer.     

Novel amphiphilic poly(epsilon-caprolactone)-g-poly(L-lysine) degradable copolymers

As part of the search of novel degradable polymers, amphiphilic and cationic poly(epsilon-caprolactone)-g-poly(l-lysine) (PCL-g-PlL) copolymers have been synthesized following a grafting "onto" or a grafting "from" method both applied to a macropolycarbanionic PCL derivative. The first approach led to PCL-g-PZlL containing 36% of epsilon-caprolactone and 64% of N-epsilon-Z-l-lysine units, by reaction of activated poly(N-epsilon-Z-l-lysine) on the macropolycarbanion derived from PCL. The second route was based on the anionic ring opening polymerization of N-carboxyanhydride of N-epsilon-benzyloxycarbonyl-l-lysine initiated by the macropolycarbanion derived from PCL and led to a similar copolymer containing 45% of of epsilon-caprolactone and 55% of N-epsilon-Z-l-lysine units. After deprotection of the lysine units, PCL-g-PlL copolymers were obtained. These copolymers are water-soluble and form nanometric micelle-like objects with mean diameters between 60 and 500 nm in distilled water depending on the synthesis route.     

Synthesis and characterization of self-assembling block copolymers containing bioadhesive end groups

3,4-Dihydroxyphenyl-L-alanine (DOPA) is an unusual amino acid found in mussel adhesive proteins (MAPs) that is believed to lend adhesive characteristics to these proteins. In this paper, we describe a route for the conjugation of DOPA moieties to poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers. Hydroxyl end groups of PEO-PPO-PEO block copolymers were activated by N,N'-disuccinimidyl carbonate and then reacted with DOPA or its methyl ester with high coupling efficiencies from both aqueous and organic solvents. DOPA-modified PEO-PPO-PEO block copolymers were freely soluble in cold water, and dye partitioning and differential scanning calorimetry analysis of these solutions revealed that the copolymers aggregated into micelles at a characteristic temperature that was dependent on block copolymer composition and concentration in solution. Oscillatory rheometry demonstrated that above a block copolymer concentration of approximately 20 wt %, solutions of DOPA-modified PEO-PPO-PEO block copolymers exhibited sol-gel transitions upon heating. The gelation temperature could be tailored between approximately 23 and 46 degrees C by changing the composition, concentration, and molecular weight of the block copolymer. Rheological measurement of the bioadhesive interaction between DOPA-modified Pluronic and bovine submaxillary mucin indicated that DOPA-modified Pluronic was significantly more bioadhesive than unmodified Pluronic.     

Repeat polypeptide models of elastin as substrates for lysyl oxidase

Synthetic repeat polypeptides analogous in sequence to the valine-rich regions of elastin have been tested as substrates for purified bovine aorta lysyl oxidase. These polypeptides, HCO(phi-Pro-Gly-Gly)n-Val-OMe, HCO(Val-Pro-Gly-phi-Gly)n-Val-OMe, and HCO-Val-(Ala-Pro-Gly-phi-Gly-Val)n-OMe, where phi = Val or Lys at approximately a 4:1 ratio and where n greater than or equal to 40, are models of the tetra-, penta-, or hexapeptide repeat sequences found in elastin. alpha-Aminoadipic delta-semialdehyde is generated in each of these upon incubation with lysyl oxidase at 37 degrees C, whereas the aldol and anhydrolysinonorleucine bifunctional cross-linkages were formed only in the incubation of enzyme with polypentapeptide. Incubation of the polypentapeptide at 55 degrees C, which enhances coacervation of the peptide, increases aldehyde formation and generates a much higher ratio of cross-linkages to aldehyde than occurred at 37 degrees C. These results demonstrate that lysyl oxidase can oxidize lysine in synthetic polypeptides and suggest important conformational aspects of lysyl oxidase substrates which may control substrate potential as well as the ability of peptidyl aldehyde, once formed by the enzyme, to condense to cross-linkage products.     

Synthesis and in vitro evaluation of novel star-shaped block copolymers (blocked star vectors) for efficient gene delivery

Novel 4-branched diblock copolymers consisting of cationic chains as an inner domain and nonionic chains as an outer domain were prepared by iniferter-based living radial polymerization and evaluated as a polymeric transfectant. The cationic polymerization of 3-(N,N-dimethylamino)propyl acrylamide (DMAPAAm) using 1,2,4,5-tetrakis( N,N-diethyldithiocarbamylmethyl)benzene as a 4-functional iniferter followed by the nonionic block polymerization of N,N-dimethylacrylamide (DMAAm) afforded 4-branched diblock copolymers with controlled compositions. By changing the solution or irradiation conditions, 4-branched PDMAPAAms with molecular weights of 10,000, 20,000, and 50,000 were synthesized. In addition, by graft polymerization, PDMAPAAm-PDMAAm blocked copolymers with copolymer composition (unit ratio of DMAAm/DMAPAAm) ranging from 0.18 to 1.0 for each cationic polymer were synthesized. All polymers were shown to interact with and condense plasmid DNA to yield polymer/DNA complexes (polyplexes). A transfection study on COS-1 cells showed that the polyplexes from block copolymers with cationic chain length of approximately 50,000 and a nonionic chain length of 30,000, which were approximately 200 nm in diameter and very stable in aqueous media, had the most efficient luciferase activity with minimal cellular cytotoxicity under a charge ratio of 20 (vector/pDNA). The PDMAPAAm-PDMAAm-blocked, star-shaped polymers are an attractive novel class of nonviral gene delivery systems.     

Synthesis and characterization of triblock copolymers of methoxy poly(ethylene glycol) and poly(propylene fumarate)

Amphiphilic block copolymers were synthesized by transesterification of hydrophilic methoxy poly(ethylene glycol) (mPEG) and hydrophobic poly(propylene fumarate) (PPF) and characterized. Four block copolymers were synthesized with a 2:1 mPEG:PPF molar ratio and mPEGs of molecular weights 570, 800, 1960, and 5190 and PPF of molecular weight 1570 as determined by NMR. The copolymers synthesized with mPEG of molecular weights 570 and 800 had 1.9 and 1.8 mPEG blocks per copolymer, respectively, as measured by NMR, representing an ABA-type block copolymer. The number of mPEG blocks of the copolymer decreased with increasing mPEG block length to as low as 1.5 mPEG blocks for copolymer synthesized with mPEG of molecular weight 5190. At a concentration range of 5-25 wt % in phosphate-buffered saline, copolymers synthesized with mPEG molecular weights of 570 and 800 possessed lower critical solution temperatures (LCST) between 40 and 45 degrees C and between 55 and 60 degrees C, respectively. Aqueous solutions of copolymer synthesized with mPEG 570 and 800 also experienced thermoreversible gelation. The sol-gel transition temperature was dependent on the sodium chloride concentration as well as the mPEG block length. The copolymer synthesized from mPEG 570 had a transition temperature between 40 and 20 degrees C with salt concentrations between 1 and 10 wt %, while the sol-gel transition temperatures of the copolymer synthesized from mPEG molecular weight 800 were higher in the range 75-30 degrees C with salt concentrations between 1 and 15 wt %. These novel thermoreversible copolymers are the first biodegradable copolymers with unsaturated double bonds along their macromolecular chain that can undergo both physical and chemical gelation and hold great promise for drug delivery and tissue engineering applications.     

Synthesis and properties of malic acid-containing functional polymers.

Poly-L-lactides containing beta-alkyl alpha-malate-units were prepared by ring-opening copolymerizations of L-lactide with 3-(s)-[(benzyloxycarbonyl)methyl]- (BMD) and 3-(s)-[(dodecyloxycarbonyl)methyl]-1,4-dioxane-2,5-diones (DMD). The solution-cast films of these copolymers were alkali-treated to form a carboxyl-functionalized surface on which cell-binding Arg-Gly-Asp tripeptide (RGD) was immobilized with dicyclohexylcarbodiimide as coupling agent. For the copolymer of L-lactide and BMD the benzyl groups were removed by catalytic hydrogenolysis to obtain a fully carboxyl-functionalized copolymer (PLGM), and RGD was immobilized on the surface of its cast film. All the RGD-immobilized films thus prepared exhibited improved cell attachment compared with the original films. The cell attachment increased with increasing amount of immobilized RGD, which depended on the composition of the alpha-malate units in the copolymer. The RGD-immobilized PLGM films were degraded rapidly during the cell culture, while the RGD-immobilized films of the beta-alkyl alpha-malate-containing polymers survived the cell culture with little degradation. The rate of hydrolysis increased with increasing content of alpha-malate units for both series, depending on the structure of the protecting groups of the beta-carboxyl. These results suggest that the RGD-immobilized polymers could be a new class of functional bioresorbable polymer having improved cell-attachment and adjustable hydrolysis rate.     

Synthesis, characterization, properties, and drug release of poly(alkyl methacrylate-b-isobutylene-b-alkyl methacrylate)

Polyisobutylene (PIB)-based block copolymers have attracted significant interest as biomaterials. Poly(styrene-b-isobutylene-b-styrene) (SIBS) has been shown to be vascularly compatible and, when loaded with paclitaxel (PTx) and coated on a coronary stent, has the ability to deliver the drug directly to arterial walls. Modulation of drug release from this polymer has been achieved by varying the drug/polymer ratio, by blending SIBS with other polymers, and by derivatizing the styrene end blocks to vary the hydrophilicity of the copolymer. In this paper, results are reported on the synthesis, physical properties, and drug elution profile of PIB-based block copolymers containing methacrylate end blocks. The preparation of PIB-poly(alkyl methacrylate) block copolymers has been accomplished by a new synthetic methodology using living cationic and anionic polymerization techniques. 1,1-Diphenylethylene end-functionalized PIB was prepared from the reaction of living PIB and 1,4-bis(1-phenylethenyl)benzene, followed by the methylation of the resulting diphenyl carbenium ion with dimethylzinc (Zn(CH(3))(2)). PIB-DPE was quantitatively metalated with n-butyllithium in tetrahydrofuran, and the resulting macroinitiator could initiate the polymerization of methacrylate monomers, yielding block copolymers with high blocking efficiency. Poly(methyl methacrylate-b-isobutylene-b-methyl methacrylate) (PMMA-b-PIB-b-PMMA) and poly(hydroxyethyl methacrylate-b-isobutylene-b-hydroxyethyl methacrylate) (PHEMA-b-PIB-b-PHEMA) triblock copolymers were synthesized and used as drug delivery matrixes for coatings on coronary stents. The PMMA-b-PIB-b-PMMA/PTx system displayed zero-order drug release, while stents coated with PHEMA-b-PIB-b-PHEMA/PTx formulations exhibited a significant initial burst release of PTx. Physical characterization using atomic force microscopy and differential scanning calorimetry of the formulated PMMA-b-PIB-b-PMMA coating matrix indicated the partial miscibility of PTx with the PMMA microphase of the matrix.     

Synthesis of amphiphilic star block copolymers and their evaluation as transdermal carriers

Amphiphilic star polymers offer substantial promise for a range of drug delivery applications owing to their ability to encapsulate guest molecules. One appealing but underexplored application is transdermal drug delivery using star block copolymer reverse micelles as an alternative to the more common oral and intravenous routes. We prepared 6- and 12-arm amphiphilic star copolymers via atom transfer radical polymerization (ATRP) of sequential blocks of polar oligo (ethylene glycol)methacrylate and nonpolar lauryl methacrylate from brominated dendritic macroinitiators based on 2,2-bis(hydroxymethyl) propionic acid. These star block copolymers demonstrate the ability to encapsulate polar dyes such as rhodamine B and FITC-BSA in nonpolar media via UV/vis spectroscopic studies and exhibit substantially improved encapsulation efficiencies, relative to self-assembled "1-arm" linear block copolymer analogs. Furthermore, their transdermal carrier capabilities were demonstrated in multiple dye diffusion studies using porcine skin, verifying penetration of the carriers into the stratum corneum.     

Evaluation of acrylate-based block copolymers prepared by atom transfer radical polymerization as matrices for paclitaxel delivery from coronary stents

Acrylate-based block copolymers, synthesized by atom transfer radical polymerization (ATRP) processes, were evaluated as drug delivery matrices for the controlled release of paclitaxel from coronary stents. The polymers were multiblock copolymers consisting of poly(butyl acrylate) or poly(lauryl acrylate) soft blocks and hard blocks composed of poly(methyl methacrylate), poly(isobornyl acrylate), or poly(styrene) homo- or copolymers. Depending on the ratio of hard to soft blocks in the copolymers, coating formulations were produced that possessed variable elastomeric properties, resulting in stent coatings that maintained their integrity when assessed by scanning electron microscopy (SEM) imaging of overexpanded stents. In vitro paclitaxel release kinetics from coronary stents coated with these copolymers typically showed an early burst followed by sustained release behavior, which permitted the elution of the majority of the paclitaxel over a 10-day time period. It was determined that neither the nature of the polyacrylate (n-butyl or lauryl) nor that of the hard block appeared to affect the release kinetics of paclitaxel at a loading of 25% drug by weight, whereas some effects were observed at lower drug loading levels. Differential scanning calorimetry (DSC) analysis indicated that the paclitaxel was at least partially miscible with the poly(n-butyl acrylate) phase of those block copolymers. The copolymers were also evaluated for sterilization stability by exposing both the copolymer alone and copolymer/paclitaxel coated stents to e-beam radiation at doses of 1-3 times the nominal dose used for medical device sterilization (25 kGy). It was found that the copolymers containing blocks bearing quaternary carbons within the polymer backbone were less stable to the radiation and showed a decrease in molecular weight as determined by gel-permeation chromatography. Conversely, those without quaternary carbons showed no significant change in molecular weight when exposed to 3 times the standard radiation dose. There was no significant change in drug release profile from any of the acrylate-based copolymers after exposure to 75 kGy of e-beam radiation, and this was attributed to the inherent radiation stability of the poly(n-butyl acrylate) center block.     

Resorbable and highly elastic block copolymers from 1,5-dioxepan-2-one and L-lactide with controlled tensile properties and hydrophilicity

New resorbable and elastomeric ABA tri- and multiblock copolymers have been successfully synthesized by combining ring-opening polymerization with ring-opening polycondensation. Five different poly(L-lactide-b-1,5-dioxepan-2-one-b-L-lactide) triblock copolymers and one new poly(L-lactide-b-1,5-dioxepan-2-one) multiblock copolymer have been synthesized. The triblock copolymers were obtained by ring-opening polymerization of 1,5-dioxepan-2-one (DXO) and L-lactide (LLA) with a cyclic tin initiator. The new multiblock copolymer was prepared by ring-opening polycondensation of a low molecular weight triblock copolymer with succinyl chloride. The molecular weight and the composition of the final copolymers were easily controlled by adjusting the monomer feed ratio, and all of the polymers obtained had a narrow molecular weight distribution. It was possible to tailor the hydrophilicity of the materials by changing the DXO content. Copolymers with a high DXO content had a more hydrophilic surface than those with a low DXO content. The receding contact angle varied from 27 to 44 degrees. The tensile properties of the copolymers were controlled by altering the PDXO block length. The tensile testing showed that all the polymers were very elastic and had very high elongations-at-break (epsilon(b)). The copolymers retained very good mechanical properties (epsilon(b) approximately 600-800% and sigma(b) approximately 8-20 MPa) throughout the in vitro degradation study (59 days).     

Acrylate end-capped poly(ester-carbonate) and poly(ether-ester)s for polymer-on-multielectrode array devices: synthesis, photocuring, and biocompatibility

Polymeric materials based on epsilon-caprolactone (CL), 1,5-dioxepan-2-one (DXO), and trimethylene carbonate (TMC) were prepared and evaluated as possible candidates for polymer-on-multielectrode (PoM) applications. CL was copolymerized with either DXO or TMC in the presence of the diol initiator 1,4-benzenedimethanol (BDM). The ring-opening polymerization experiments, carried out in bulk and using tin(II) catalysis, yielded the desired low molecular weight random copolymer diols, as evidenced by NMR, IR, MALDI-ToF MS, and DSC techniques. Upon reaction with acryloyl chloride, the corresponding diacrylate end-capped copolymers were obtained. The latter were characterized by NMR and IR spectroscopy, and their photocross-linking (in the presence of a UV initiator) was followed by ATR-FTIR spectroscopy. Transparent and soft thin films of the copoly(ether-ester) and copoly(ester-carbonate) diacrylates were prepared and cured under UV irradiation. The resulting polymeric films showed good biocompatibility properties as far as in vitro neural stem cells proliferation and differentiation to neurons and astrocytes are concerned. Noteworthy are the beneficial effects obtained upon preconditioning the copolymers by means of the cell-culture medium and the excellent properties shown particularly by the CL-TMC copolymer. Moreover, preliminary results show that microchannel formation by photocuring is possible with the synthesized polymers.