Lipid chain selectivity by outer membrane phospholipase A

Outer membrane phospholipase A (OMPLA) is a unique, integral membrane enzyme found in Gram-negative bacteria and is an important virulence factor for pathogens such as Helicobacter pylori. This broad-specificity lipase degrades a variety of lipid substrates, and it plays a direct role in adjusting the composition and permeability of bacterial membranes under conditions of stress. Interestingly, OMPLA shows little preference for the lipid headgroup and, instead, the length of the hydrophobic acyl chain is the strongest determinant for substrate selection by OMPLA, with the enzyme strongly preferring substrates with chains equal to or longer than 14 carbon atoms. The question remains as to how a hydrophobic protein like OMPLA can achieve this specificity, particularly when the shorter chains can be accommodated in the binding pocket. Using a series of sulfonyl fluoride inhibitors with various lengths of acyl chain, we show here that the thermodynamics of substrate-induced OMPLA dimerization are guided by the acyl chain length, demonstrating that OMPLA uses a unique biophysical mechanism to select its phospholipid substrate.     

Energetics of outer membrane phospholipase A (OMPLA) dimerization

Outer membrane phospholipase A (OMPLA) is a widely conserved transmembrane enzyme found in Gram-negative bacteria, and it is implicated in the virulence of a number of pathogenic organisms. The regulation of the protein's phospholipase activity is not well understood despite the existence of a number of high resolution structures. Previous biochemical studies have demonstrated that dimerization of OMPLA is a prerequisite for its phospholipase activity, and it has been shown in vitro that this dimerization is dependent on calcium and substrate binding. Therefore, to fully understand the regulation of OMPLA, it is necessary to understand the stability of the protein dimer and the extent to which it is influenced by its effector molecules. We have used sedimentation equilibrium analytical ultracentrifugation to dissect the energetics of Escherichia coli OMPLA dimerization in detergent micelles. We find that calcium contributes relatively little stability to the dimer, while interactions with the substrate acyl chain are the predominant force in stabilizing the dimeric conformation of the enzyme. The resulting thermodynamic cycle suggests that interactions between effector molecules are additive. These energetic measurements not only provide insight into the activation of OMPLA, but they also represent the first quantitative investigation of the association energetics of a transmembrane beta-barrel. This thermodynamic study allows us to begin to address the differences between protein-protein interfaces in transmembrane proteins with a helical fold to those of a beta-barrel fold and to more fully understand the forces involved in membrane protein interactions.     

Bacteriocin Release Protein Triggers Dimerization of Outer Membrane Phospholipase A In Vivo

Bacteriocin release protein is known to activate outer membrane phospholipase A (OMPLA), which results in the release of colicin from Escherichia coli. In vivo chemical cross-linking experiments revealed that the activation coincides with dimerization of OMPLA. Permeabilization of the cell envelope and dimerization were characterized by a lag time of 2 h.     

Outer membrane phospholipase A is dimeric in phospholipid bilayers: a cross-linking and fluorescence resonance energy transfer study.

In the cell, the activity of outer membrane phospholipase A (OMPLA) is strictly regulated to prevent uncontrolled breakdown of the membrane lipids. Previously, it has been shown that the enzymatic activity is modulated by reversible dimerization. The current studies were carried out to define the oligomeric state of OMPLA in a membrane and to investigate the activation process. Three single-cysteine variant proteins H26C, H234C, and S144C were produced and purified to homogeneity. Using maleimido-based homo-bifunctional cross-linking reagents, H26C could be efficiently cross-linked as assessed by SDS-PAGE, whereas S144C and H234C could not be cross-linked. These data suggest that residue 26 is located close to the dimer symmetry axis. H26C was specifically labeled with 5-({[(2-iodoacetyl)amino]ethyl}amino)naphthalene-1-sulfonic acid and N,N'-dimethyl-N-(iodoacetyl)-N-(7-nitrobenz-2-oxa-1, 3-diazol-4-yl)ethylenediamine as the fluorescent energy donor and acceptor, respectively, and dimerization was investigated using fluorescence resonance energy transfer (FRET). Quenching of the donor in the presence of the acceptor demonstrated the dimeric nature of OMPLA, in agreement with cross-linking data. The observed FRET effect was dependent on the cofactor calcium, and the presence of substrate, indicating the specificity of the dimerization process. The labeled protein was reconstituted in phospholipid vesicles. In bilayers, OMPLA exhibited low activity and was dimeric as assessed by FRET. Addition of detergent resulted in a 70-fold increase in activity, while the protein remained dimeric. The results are discussed in terms of the activation of dimeric OMPLA due to changes in the physical state of the bilayer which occur upon perturbation of the membrane integrity.     

Energy landscape and transition state of protein-protein association

Formation of a stereospecific protein complex is favored by specific interactions between two proteins but disfavored by the loss of translational and rotational freedom. Echoing the protein folding process, we have previously proposed a transition state for protein-protein association. Here we clarify the specification of the transition state by working with two types of toy models for protein association. A “hemisphere” model consists of two matching hemispheres as associating proteins, and a “crater” model consists of a spherical protein with a crater to which another spherical protein fits snugly. Short-range pairwise interactions between sites across the interface hold together the bound complex. Small relative translation and rotation between the subunits quickly destroy the interactions, leading to a sharp transition between the bound state with numerous short-range interactions but restricted translation and rotational freedom and the unbound state with, at most, a small number of interactions but expanded configurational freedom. This transition sets the outer boundary of the bound state as well as the transition state for association. The energy landscape is funnel-like, with the deep well of the bound state surrounded by a broad shallow basin. Calculations with the toy models suggest that mutational change in the interaction energy in the x-ray structure of a protein-protein complex, commonly used to approximate the effect on the association constant, overestimates the effect of mutation by 10–20%. With an eye toward specifying the transition states of actual protein complexes, we find that the total number of contacts between the subunits serves as a good surrogate of the interaction energy. This formalism of protein-protein association is applied to the barnase-barstar complex, reproducing the experimental results for the association rate over a wide range of ionic strength.     

Structure-based method for analyzing protein–protein interfaces

Hydrogen bond, hydrophobic and vdW interactions are the three major non-covalent interactions at protein–protein interfaces. We have developed a method that uses only these properties to describe interactions between proteins, which can qualitatively estimate the individual contribution of each interfacial residue to the binding and gives the results in a graphic display way. This method has been applied to analyze alanine mutation data at protein–protein interfaces. A dataset containing 13 protein–protein complexes with 250 alanine mutations of interfacial residues has been tested. For the 75 hot-spot residues (G1.5 kcal mol^-1), 66 can be predicted correctly with a success rate of 88%. In order to test the tolerance of this method to conformational changes upon binding, we utilize a set of 26 complexes with one or both of their components available in the unbound form. The difference of key residues exported by the program is 11% between the results using complexed proteins and those from unbound ones. As this method gives the characteristics of the binding partner for a particular protein, in-depth studies on protein–protein recognition can be carried out. Furthermore, this method can be used to compare the difference between protein–protein interactions and look for correlated mutation. Figure Key interaction grids at the interface between barnase and barstar. Key interaction grid for barnase and barstar are presented in one figure according to their coordinates. In order to distinguish the two proteins, different icons were assigned. Crosses represent key grids for barstar and dots represent key grids for barnase. The four residues in ball and stick are Asp40 in barstar and Arg83, Arg87, His102 in barnase.     

Structural characterization of the self‐association domain of swallow

Swallow, a 62 kDa multidomain protein, is required for the proper localization of several mRNAs involved in the development of Drosophila oocytes. The dimerization of Swallow depends on a 71‐residue self‐association domain in the center of the protein sequence, and is significantly stabilized by a binding interaction with dynein light chain (LC8). Here, we detail the use of solution‐state nuclear magnetic resonance spectroscopy to characterize the structure of this self‐association domain, thereby establishing that this domain forms a parallel coiled‐coil and providing insight into how the stability of the dimerization interaction is regulated.     

Validation of a new restraint docking method for solution structure determinations of protein–ligand complexes

A new method is proposed for docking ligands into proteins in cases where an NMR-determined solution structure of a related complex is available. The method uses a set of experimentally determined values for protein–ligand, ligand–ligand, and protein–protein restraints for residues in or near to the binding site, combined with a set of protein–protein restraints involving all the other residues which is taken from the list of restraints previously used to generate the reference structure of a related complex. This approach differs from ordinary docking methods where the calculation uses fixed atomic coordinates from the reference structure rather than the restraints used to determine the reference structure. The binding site residues influenced by replacing the reference ligand by the new ligand were determined by monitoring differences in ¹H chemical shifts. The method has been validated by showing the excellent agreement between structures of L. casei dihydrofolate reductase.trimetrexate calculated by conventional methods using a full experimentally determined set of restraints and those using this new restraint docking method based on an L. casei dihydrofolate reductase.methotrexate reference structure.     

Outer-membrane phospholipase A: known structure, unknown biological function

Outer-membrane phospholipase A (OMPLA) is one of the few enzymes present in the outer membrane of Gram-negative bacteria. The enzymatic activity of OMPLA is strictly regulated to prevent uncontrolled breakdown of the surrounding phospholipids. The activity of OMPLA can be induced by membrane perturbation and concurs with dimerization of the enzyme. The recently elucidated crystal structures of the inactive, monomeric and an inhibited dimeric form of the enzyme provide detailed structural insight into the functional properties of the enzyme. OMPLA is a serine hydrolase with a unique Asn-156-His-142-Ser-144 catalytic triad. Only in the dimeric state, complete substrate binding pockets and functional oxyanion holes are formed. A model is proposed for the activation of OMPLA in which membrane perturbation causes the formation of non-bilayer structures, resulting in the presentation of phospholipids to the active site of OMPLA and leading to the formation of the active dimeric species. Possible roles for OMPLA in maintaining the cell envelope integrity and in pathogenicity are discussed.     

Activation of a covalent outer membrane phospholipase A dimer.

The activity of outer membrane phospholipase A (OMPLA) is regulated by reversible dimerization. However, native OMPLA reconstituted in phospholipid vesicles was found to be present as a dimer but nevertheless inactive. To investigate the importance of dimerization for control of OMPLA activity, a covalent OMPLA dimer was constructed and its properties were compared to native OMPLA both in a micellar detergent and after reconstitution in a phospholipid bilayer. Unlike native OMPLA, activity of the covalent OMPLA dimer was independent of type and concentration of detergent in micellar systems. In such systems, the covalent OMPLA dimer invariantly displayed high calcium affinity. In contrast, high calcium concentrations were required to activate a covalent OMPLA dimer when present in intact vesicles. Solubilization of the vesicles increased the affinity for calcium, suggesting that in an intact bilayer the dimer interface is not properly formed. This was supported by the observation that OMPLA variants having an impaired dimeric interface also lacked high affinity calcium binding. A covalent linkage was not able to restore high affinity calcium binding in these variants, demonstrating that a proper dimer interface is essential for optimal catalysis.     

Effect of Receptor Dimerization on Membrane Lipid Raft Structure Continuously Quantified on Single Cells by Camera Based Fluorescence Correlation Spectroscopy

Membrane bound cell signaling is modulated by the membrane ultra-structure, which itself may be affected by signaling. However, measuring the interaction of membrane proteins with membrane structures in intact cells in real-time poses considerable challenges. In this paper we present a non-destructive fluorescence method that quantifies these interactions in single cells, and is able to monitor the same cell continuously to observe small changes. This approach combines total internal fluorescence microscopy with fluorescence correlation spectroscopy to measure the protein’s diffusion and molecular concentration in different sized areas simultaneously. It correctly differentiates proteins interacting with membrane fences from proteins interacting with cholesterol-stabilized domains, or lipid rafts. This method detects small perturbations of the membrane ultra-structure or of a protein’s tendency to dimerize. Through continuous monitoring of single cells, we demonstrate how dimerization of GPI-anchored proteins increases their association with the structural domains. Using a dual-color approach we study the effect of dimerization of one GPI-anchored protein on another type of GPI-anchored protein expressed in the same cell. Scans over the cell surface reveal a correlation between cholesterol stabilized domains and membrane cytoskeleton.     

Identifying an interaction site between MutH and the C-terminal domain of MutL by crosslinking, affinity purification, chemical coding and mass spectrometry

To investigate protein–protein interaction sites in the DNA mismatch repair system we developed a crosslinking/mass spectrometry technique employing a commercially available trifunctional crosslinker with a thiol-specific methanethiosulfonate group, a photoactivatable benzophenone moiety and a biotin affinity tag. The XACM approach combines photocrosslinking (X), in-solution digestion of the crosslinked mixtures, affinity purification via the biotin handle (A), chemical coding of the crosslinked products (C) followed by MALDI-TOF mass spectrometry (M). We illustrate the feasibility of the method using a single-cysteine variant of the homodimeric DNA mismatch repair protein MutL. Moreover, we successfully applied this method to identify the photocrosslink formed between the single-cysteine MutH variant A223C, labeled with the trifunctional crosslinker in the C-terminal helix and its activator protein MutL. The identified crosslinked MutL-peptide maps to a conserved surface patch of the MutL C-terminal dimerization domain. These observations are substantiated by additional mutational and chemical crosslinking studies. Our results shed light on the potential structures of the MutL holoenzyme and the MutH–MutL–DNA complex.     

Mass spectrometry-based footprinting of protein–protein interactions

We present a high-resolution mass spectrometric (MS) footprinting method enabling identification of contact amino acids in protein–protein complexes. The method is based on comparing surface topologies of a free protein versus its complex with the binding partner using differential accessibility of small chemical group selective modifying reagents. Subsequent MS analysis reveals the individual amino acids selectively shielded from modification in the protein–protein complex. The current report focuses on probing interactions between full-length HIV-1 integrase and its principal cellular partner lens epithelium-derived growth factor. This method has a generic application and is particularly attractive for studying large protein–protein interactions that are less amenable for crystallographic or NMR analysis.     

Rate of nitric oxide scavenging by hemoglobin bound to haptoglobin

Cell-free hemoglobin, released from the red cell, may play a major role in regulating the bioavailability of nitric oxide. The abundant serum protein haptoglobin, rapidly binds to free hemoglobin forming a stable complex accelerating its clearance. The haptoglobin gene is polymorphic with two classes of alleles denoted 1 and 2. We have previously demonstrated that the haptoglobin 1 protein–hemoglobin complex is cleared twice as fast as the haptoglobin 2 protein–hemoglobin complex. In this report, we explored whether haptoglobin binding to hemoglobin reduces the rate of nitric oxide scavenging using time-resolved absorption spectroscopy. We found that both the haptoglobin 1 and haptoglobin 2 protein complexes react with nitric oxide at the same rate as unbound cell-free hemoglobin. To confirm these results we developed a novel assay where free hemoglobin and hemoglobin bound to haptoglobin competed in the reaction with NO. The relative rate of the NO reaction was then determined by examining the amount of reacted species using analytical ultracentrifugation. Since complexation of hemoglobin with haptoglobin does not reduce NO scavenging, we propose that the haptoglobin genotype may influence nitric oxide bioavailability by determining the clearance rate of the haptoglobin–hemoglobin complex. We provide computer simulations showing that a twofold difference in the rate of uptake of the haptoglobin–hemoglobin complex by macrophages significantly affects nitric oxide bioavailability thereby providing a plausible explanation for why there is more vasospasm after subarachnoid hemorrhage in individuals and transgenic mice homozygous for the Hp 2 allele.     

A Theoretical Graph Method for Search and Analysis of Critical Phenomena in Biochemical Systems. II. Kinetic Models of Biochemical Oscillators Including Two and Three Substances

Four kinetic models of hypothetical complex reactions containing minimal two-substance or three-substance oscillators were constructed on the basis of the graphical rules suggested in the preceding work. The kinetic models are thought to be a part of one of four general biochemical systems: 1) system of mutual protein phosphorylation/dephosphorylation; 2) autophosphorylation of multisubunit protein; 3) association/dissociation of proteins or protein-containing structures during protein–protein or protein–ligand interaction; and 4) two-substrate enzymatic reaction with substrate inhibition by one substrate. Graphical rules of oscillator association with surrounding medium were considered. The graphical criteria of the oscillation generator elimination and criteria of oscillation damping were obtained. Both damped and undamped oscillations of reaction components were obtained by numerical integration of the mathematical models of these reactions. The areas of changes of model parameters and variables, within which the oscillations exist, were found.     

Computational design of small molecular modulators of protein–protein interactions with a novel thermodynamic cycle: Allosteric inhibitors of HIV‐1 integrase

Targeting protein–protein interactions for therapeutic development involves designing small molecules to either disrupt or enhance a known PPI. For this purpose, it is necessary to compute reliably the effect of chemical modifications of small molecules on the protein–protein association free energy. Here we present results obtained using a novel thermodynamic free energy cycle, for the rational design of allosteric inhibitors of HIV‐1 integrase (ALLINI) that act specifically in the early stage of the infection cycle. The new compounds can serve as molecular probes to dissect the multifunctional mechanisms of ALLINIs to inform the discovery of new allosteric inhibitors. The free energy protocol developed here can be more broadly applied to study quantitatively the effects of small molecules on modulating the strengths of protein–protein interactions.     

A novel far-red bimolecular fluorescence complementation system that allows for efficient visualization of protein interactions under physiological conditions

Fluorescent protein (FP) has enabled the analysis of biomolecular interactions in living cells, and bimolecular fluorescence complementation (BiFC) represents one of the newly developed imaging technologies to directly visualize protein–protein interactions in living cells. Although 10 different FPs that cover a broad range of spectra have been demonstrated to support BiFC, only Cerulean (cyan FP variant), Citrine and Venus (yellow FP variants)-based BiFC systems can be used under 37 °C physiological temperature. The sensitivity of two mRFP-based red BiFC systems to higher temperatures (i.e., 37 °C) limits their applications in most mammalian cell-based studies. Here we report that mLumin, a newly isolated far-red fluorescent protein variant of mKate with an emission maximum of 621 nm, enables BiFC analysis of protein–protein interactions at 37 °C in living mammalian cells. Furthermore, the combination of mLumin with Cerulean- and Venus-based BiFC systems allows for simultaneous visualization of three pairs of protein–protein interactions in the same cell. The mLumin-based BiFC system will facilitate simultaneous visualization of multiple protein–protein interactions in living cells and offer the potential to visualize protein–protein interactions in living animals.     

Heparin-mediated dimerization of follistatin

Heparin and heparan sulfate (HS) are highly sulfated polysaccharides covalently bound to cell surface proteins, which directly interact with many extracellular proteins, including the transforming growth factor-β (TGFβ) family ligand antagonist, follistatin 288 (FS288). Follistatin neutralizes the TGFβ ligands, myostatin and activin A, by forming a nearly irreversible non-signaling complex by surrounding the ligand and preventing interaction with TGFβ receptors. The FS288-ligand complex has higher affinity than unbound FS288 for heparin/HS, which accelerates ligand internalization and lysosomal degradation; however, limited information is available for how FS288 interactions with heparin affect ligand binding. Using surface plasmon resonance (SPR) we show that preincubation of FS288 with heparin/HS significantly decreased the association kinetics for both myostatin and activin A with seemingly no effect on the dissociation rate. This observation is dependent on the heparin/HS chain length where small chain lengths less than degree of polymerization 10 (dp10) did not alter association rates but chain lengths >dp10 decreased association rates. In an attempt to understand the mechanism for this observation, we uncovered that heparin induced dimerization of follistatin. Consistent with our SPR results, we found that dimerization only occurs with heparin molecules >dp10. Small-angle X-ray scattering of the FS288 heparin complex supports that FS288 adopts a dimeric configuration that is similar to the FS288 dimer in the ligand-bound state. These results indicate that heparin mediates dimerization of FS288 in a chain-length-dependent manner that reduces the ligand association rate, but not the dissociation rate or antagonistic activity of FS288.     

Membrane orientation and oligomerization of the melanocortin receptor accessory protein 2

The melanocortin receptor accessory protein 2 (MRAP2) plays a pivotal role in the regulation of several G protein–coupled receptors that are essential for energy balance and food intake. MRAP2 loss-of-function results in obesity in mammals. MRAP2 and its homolog MRAP1 have an unusual membrane topology and are the only known eukaryotic proteins that thread into the membrane in both orientations. In this study, we demonstrate that the conserved polybasic motif that dictates the membrane topology and dimerization of MRAP1 does not control the membrane orientation and dimerization of MRAP2. We also show that MRAP2 dimerizes through its transmembrane domain and can form higher-order oligomers that arrange MRAP2 monomers in a parallel orientation. Investigating the molecular details of MRAP2 structure is essential for understanding the mechanism by which it regulates G protein–coupled receptors and will aid in elucidating the pathways involved in metabolic dysfunction.     

Effect of Periodic Heat Shock on the Inner Membrane System of Etioplasts

Etiolated barley (Hordeum vulgare L.) seedlings were treated with heat shock (HS). The heat treatment was conducted daily for 1 h at 40°C over 6 days and led to shortening of leaves and coleoptiles, an increase in the etioplast volume and prothylakoid length, and to a decrease in the size of paracrystalline prolamellar bodies (PLB). As a result of HS treatment, stimulation of carotenoid and protochlorophyllide (Pchlide) synthesis as well as an increase in the relative content of the Pchlide short-wavelength form (Pchlide₆₃₀) were observed in the leaf tissue of seven-day-old seedlings 12 h after the last HS treatment. HS had no effect on the overall amount of Pchlide-oxidoreductase (POR) in leaves and PLB membranes and did not suppress the Pchlide photoreduction in vivo. PLB membranes, isolated from the HS-treated seedlings, possessed a higher Pchlide and carotenoid content as calculated on total protein basis. These membranes showed more intense protein fluorescence than PLB from untreated plants, whereas hydrophobicity of the microenvironment of the fluorescent amino-acid residues remained unchanged. Studies using pyrene (lipophilic fluorescent probe emitted in Pchlide and carotenoid absorption bands) showed that HS increases the fluidity of membrane lipids in PLB membranes and that the pigments accumulated in these membranes are located in the region of lipid–protein contact site. The results are discussed in relation to the adaptive role of protein–protein and pigment–protein–lipid interactions in etioplast membranes under stress.