Fluidized bed adsorption of cephalosporin C.

Fluidized bed adsorption can substantially simplify the recovery of products from fermentation. There are, however, several critical parameters, which have a significant influence on the performance of such systems. This paper presents experimental results on the adsorption of an antibiotic, Cephalosporin C, on macroporous adsorbents of the polystyrene type and on an ion exchanger. Internals (static mixers) were used to control bed expansion and mixing, the range of flow rates could thus be extended significantly. An integrated mathematical model was developed comprising bed expansion, residence time distribution and mixing, adsorption kinetics and equilibria.     

Competition between native and monoacetylated polymyxin for charged adsorption sites

The native antibiotic polymyxin B, carrying five positive charges, displaces the monoacetylated on from its adsorbed state at the interface between negatively charged lipid layers ans water. A simulation model for asdorption, governed by electrostatic forces, is presented. The model adequently representes the competitive adsorption kinetics and equilibria.     

Biosorption of Lead from Industrial Wastewater Using Chrysophyllum albidum Seed Shell

The shell of the seed of Chrysophyllum albidum carbon was used to adsorb lead (Pb) from aqueous solution, the sorption process with respect to its equilibria and kinetics as well as the effects of pH, contact time, adsorbent mass, adsorbate concentration, and particle size on adsorption were also studied. The most effective pH range was found to be between 4.5 and 5 for the sorption of the metal ion. The first-order rate equation by Lagergren was tested on the kinetic data and the adsorption process followed first-order rate kinetics. Isotherm data were analyzed for possible agreement with the Langmuir and Freundlich adsorption isotherms; the Freundlich and Langmuir models for dynamics of metal ion uptake proposed in this work fitted the experimental data reasonably well. However, equilibrium sorption data were better represented by Langmuir model than Freundlich. The adsorption capacity calculated from Langmuir isotherm was 72.1 mg Pb (II) g^{- 1} at initial pH of 5.0 at 30°C for the particle size of 1.00 to 1.25 mm with the use of 2.0 g/100 ml adsorbent mass. The structural features of the adsorbent were characterized by Fourier transform infrared (FTIR) spectrometry; the presence of hydroxyl, carbonyl, amide, and phosphate groups confirms the potential mechanism adsorption of the adsorbent. This readily available adsorbent is efficient in the uptake of Pb (II) ion in aqueous solution, thus, it could be an excellent alternative for the removal of heavy metals and organic matter from water and wastewater.     

Adsorption kinetics and equilibria of bovine serum albumin on rigid ion-exchange and hydrophobic interaction chromatography matrices in a stirred cell

Rigid adsorbents have advantages over soft gel media for downstream processing of proteins. The adsorption of bovine serum albumin (BSA) has been investigated on a rigid adsorbent based on a wide-pore, hydrophilically coated, silica-gel matrix. The effects of surface chemistry (weak anion exchanger and hydrophobic interaction chromatography) and particle size have been studied on the physical properties of the adsorbent and on the adsorption equilibria and adsorption kinetics. The rates of adsorption of BSA have been measured in a stirred cell and are found to be satisfactorily described by a two-step theoretical model, in which the mass transfer involves a pore diffusion resistance and an extra-particle film resistance. On the anion exchanger, the effective pore diffusivity decreases substantially with increasing protein concentration, approximately halving as the initial concentration rises from 0.7 to 2g/l. In the hydrophobic interaction chromatography medium, the pore diffusivity is less sensitive to protein concentration and is also reduced by a factor of about 4 by aggregation of the protein. Effective pore diffusivities with the "wide-pore" silica adsorbents in anion-exchange form are 36-94 times lower than the diffusivity in free solution and are comparable with the lower of the wide range of values published for soft gels.     

Analysis of the statistical thermodynamic model for nonlinear binary protein adsorption equilibria

The statistical thermodynamic (ST) model was used to study nonlinear binary protein adsorption equilibria on an anion exchanger. Single-component and binary protein adsorption isotherms of bovine hemoglobin (Hb) and bovine serum albumin (BSA) on DEAE Spherodex M were determined by batch adsorption experiments in 10 mM Tris-HCl buffer containing a specific NaCl concentration (0.05, 0.10, and 0.15 M) at pH 7.40. The ST model was found to depict the effect of ionic strength on the single-component equilibria well, with model parameters depending on ionic strength. Moreover, the ST model gave acceptable fitting to the binary adsorption data with the fitted single-component model parameters, leading to the estimation of the binary ST model parameter. The effects of ionic strength on the model parameters are reasonably interpreted by the electrostatic and thermodynamic theories. The effective charge of protein in adsorption phase can be separately calculated from the two categories of the model parameters, and the values obtained from the two methods are consistent. The results demonstrate the utility of the ST model for describing nonlinear binary protein adsorption equilibria.     

Stochastic modeling of affinity adsorption

A stochastic model is described that allows surface proximity and packing effects to be incorporated into predictions of adsorption kinetics and equilibrium of affinity adsorption. Equilibrium predictions show that, depending on conditions chosen, the results obtained for equilibrium conditions can exhibit either a Freundlich- or a Langmuir-type relationship. Under conditions of surface density imposed adsorption constraints, the time taken for equilibrium to be reached increases as the "off" constant is decreased. This suggests that for resins having a high immobilized ligand density binding kinetics may be more highly limited by the "off" constant than by mass transfer limitations.     

Kinetic studies on the adsorption of Cd2+, Cu2+ and Zn2+ ions from aqueous solutions by cassava (Manihot sculenta Cranz) tuber bark waste

The kinetics of Cd2+, Cu2+ and Zn2+ adsorption onto pure and thioglycolic acid treated cassava tuber bark wastes (CTBW) were investigated using a batch sorption technique at 30 degrees C. Kinetic data suggested that the adsorption process was exothermic, the rate limiting sorption step was physisorption and adsorption rates could be best described by a pseudo-second order model. Rate coefficients were determined to range between 1.39x10(-2)min(-1) and 5.94x10(-2)min(-1), 1.46x10(-3)min(-1) and 5.76x10(-3)min(-1) and 0.69x10(-3)min(-1) and 5.8x10(-3)min(-1) for Cd2+, Cu2+ and Zn2+, respectively. The results from these studies indicated that the sorption process is fast and stable. The adsorption equilibria were evaluated using the Langmuir equation and the monolayer sorption capacity was found to range between 5.88-26.3mg/g, 33.3-90.9 mg/g and 22.2-83.3mg/g for Cd2+, Cu2+ and Zn2+, respectively. Negative values of DeltaG(ads)(0) indicated that the adsorption process was spontaneous and exothermic in nature.     

Activity and adsorption of lipase from Nigella sativa seeds on Celite at different pH values

Lipase from Nigella sativa seeds was immobilized by adsorption on Celite 535 from phosphate buffer solutions varying pH values of 5.0–8.0 at 25?°C. Langmuir isotherms described the adsorption equilibria well for lipase adsorption at all pH range. The saturation capacity for adsorption of lipase increased from 14.5 to 24.3 mg g^?1 Celite as the adsorption pH was reduced from 8 to 5, but the adsorption equilibrium constant remained constant and was determined to be 1.92 × 10⁵ M^?1. The adsorbed enzymes showed different activity values depending on the pH of the adsorption medium. The immobilized enzymes prepared at pH 6 displayed the highest activity values.     

Real-time determination of kinetics of adsorption of lead(II) onto palm shell-based activated carbon using ion selective electrode

In this study, the kinetics of adsorption of Pb(II) from aqueous solution onto palm shell-based activated carbon (PSAC) were investigated by employing ion selective electrode (ISE) for real-time Pb(II) and pH monitoring. Usage of ISE was very appropriate for real-time adsorption kinetics data collection as it facilitated recording of adsorption data at very specific and short time intervals as well as provided consistent kinetics data. Parameters studied were initial Pb(II) concentration and agitation speed. It was found that increases in initial Pb(II) concentration and agitation speed resulted in higher initial rate of adsorption. Pseudo first-order, pseudo second-order, Elovich, intraparticle diffusion and liquid film diffusion models were used to fit the adsorption kinetics data. It was suggested that chemisorption was the rate-controlling step for adsorption of Pb(II) onto PSAC since the adsorption kinetics data fitted both the pseudo second-order and Elovich models well.     

Equilibria for the adsorption of antibiotics onto neutral polymeric sorbents: Experimental and modeling studies

The objective of this work was to study the equilibria for adsorption of three antibiotics (penicillin V, tetracycline, and cephalosporin C) from water onto commercially available neutral polymeric sorbents. The pH was observed to be an important factor in adsorption as our results suggest that the neutral forms of penicillin V and cephalosporin C are preferentially adsorbed onto the neutral sorbents. Also, sorbent surface chemistry was observed to be important for adsorption, as the antibiotics adsorbed more favorably (both in terms of affinities and enthalpies) onto the aromatic sorbent as compared to the aliphatic ester sorbent. In addition to these thermodynamic measurements, molecular modeling studies and Monte Carlo simulations suggest that adsorption onto aromatic sorbents may involve specific interactions between the planar regions of the antibiotic molecules and the phenyl rings of the aromatic sorbent. The interaction energies predicted from Monte Carlo simulations were observed to provide qualitative agreement with experimentally determined adsorption affinities. (c) 1995 John Wiley & Sons, Inc.     

Adsorption equilibria between liposome membrane formed of phosphatidylcholine and aqueous sodium chloride solution as a function of pH

The effect has been studied of the adsorption of ions (H(+), Na(+), OH(-), Cl(-)) which are present in solution upon the electric charge of the liposome membrane formed of phosphatidylcholine (PC). The surface charge density of the membrane was determined as a function of pH and electrolyte concentration from electrophoretic mobility measurements. The measurements were carried out by the laser-Doppler microelectrophoresis method. A four-equilibria model has been proposed to describe the phenomena occurring on the membrane surface. The equilibria in which the adsorption of other ions on the liposome membrane surface was involved were assumed to exist beside the equilibria in which the H(+) and OH(-) ions were engaged. The idea was confirmed by mathematical calculations. Association constants of the liposome membrane surface with ions of solution (K(AH), K(ANa), K(BOH), K(BCl)) were determined. The proposed model has been proved to be correct by comparing the resulting theoretic charge variation curves of the lecithin membrane with the experimental data.     

Interaction of lactoferrin and lysozyme with casein micelles

On addition of lactoferrin (LF) to skim milk, the turbidity decreases. The basic protein binds to the caseins in the casein micelles, which is then followed by a (partial) disintegration of the casein micelles. The amount of LF initially binding to casein micelles follows a Langmuir adsorption isotherm. The kinetics of the binding of LF could be described by first-order kinetics and similarly the disintegration kinetics. The disintegration was, however, about 10 times slower than the initial adsorption, which allowed investigating both phenomena. Kinetic data were also obtained from turbidity measurements, and all data could be described with one equation. The disintegration of the casein micelles was further characterized by an activation energy of 52 kJ/mol. The initial increase in hydrodynamic size of the casein micelles could be accounted for by assuming that it would go as the cube root of the mass using the adsorption and disintegration kinetics as determined from gel electrophoresis. The results show that LF binds to casein micelles and that subsequently the casein micelles partly disintegrate. All micelles behave in a similar manner as average particle size decreases. Lysozyme also bound to the casein micelles, and this binding followed a Langmuir adsorption isotherm. However, lysozyme did not cause the disintegration of the casein micelles.     

Kinetics of adhesion of selected fish-pathogenic Vibrio strains of skin mucus of gilt-head sea bream (Sparus aurata L.).

The kinetics of adhesion of Vibrio strains isolated from diseased fish to skin mucus of gilt-head sea bream was studied. A modified Langmuir adsorption isotherm was calculated, and the results obtained indicate that the strains tested (Vibrio alginolyticus DP1HE4 and Vibrio anguillarum-like DC12R8 and DC12R9) showed a saturation kinetics except for V. alginolyticus (CAN), which showed a proportional adsorption kinetics. The adhesive capability for skin mucus does not seem to be an essential virulence factor of pathogenic strains of Vibrio, since this specific interaction depended on several environmental factors, temperature and salinity being the most important. However, the absence of an inhibitory effect of mucus on the pathogenic microorganisms, and the capability of the Vibrio strains to utilize mucus as a carbon source, could favor their settlement on the skin with a potential for infection of cultured, stressed fish.     

Cooperative specific adsorption phenomena in biology

The importance of cooperative specific adsorption for the interpretation of biological processes is pointed out by the agreement of experimental data with a cooperative specific adsorption isotherm which has been derived on the basis of statistical mechanics as well as stochastically. An approach is described to account for physiological excitation on the basis of cooperative specific adsorption of potassium and sodium after a switch in the adsorption preference of the sites for those ions. To derive the accompanying bioelectric phenomena, the vacant negative adsorbing sites and the changes of occupancy of the interstitial sites have to be taken into account. This leads to the kinetics of cooperative phenomena in which each state variable can assume at least three values. For this purpose a master-equation has to be solved or a Monte Carlo method used. It is suggested that the calcium concentration be considered as a control variable when catastrophe theory is applied.     

Hydrolysis of butteroil by immobilized lipase using a hollow-fiber reactor: part I. lipase adsorption studies

Adsorption of proteins from a crude preparation containing a lipase from Aspergillus niger on microporous polypropylene hollow fibers was studied at six different temperatures. Langmuir isotherms accurately describe the overall adsorption equilibria. Lipase is selectively adsorbed relative to the other proteins in the crude preparation. Hence, immobilization also provides further purification of the lipase. The predictions of the Langmuir model for the change in the specific activity of lipase upon adsorption are consistent with experimental results. The loading capacity of the hollow fibers decreases and the adsorption constant increases as temperature is increased. This effect is more significant in the case of lipolytic activity than it is for the total amount of adsorbed protein. Small, positive enthalpy changes are associated with the adsorption of lipase on these hydrophobic membranes.     

Adsorption kinetics of laterally and polarly flagellated Vibrio.

The adsorption of laterally and polarly flagellated bacteria to chitin was measured, and from the data obtained, a modified Langmuir adsorption isotherm was derived. Results indicated that the adsorption of laterally flagellated Vibrio parahaemolyticus follows the Langmuir adsorption isotherm, a type of adsorption referred to as surface saturation kinetics, when conditions are favorable for the production of lateral flagella. When conditions were not favorable for the production of lateral flagella, bacterial adsorption did not follow the Langmuir adsorption isotherm; instead, proportional adsorption kinetics were observed. The adsorption of some polarly flagellated bacteria exhibited surface saturation kinetics. However, the binding index (the product of the number of binding sites and bacterial affinity to the surface) of polarly flagellated bacteria differed significantly from that of laterally flagellated bacteria, suggesting that polarly flagellated bacteria adsorb to chitin by a different mechanism from that used by the laterally flagellated bacteria. From the results of dual-label adsorption competition experiments, in which polarly flagellated V. cholerae competed with increasing concentrations of laterally flagellated V. parahaemolyticus, it was observed that laterally flagellated bacteria inhibited the adsorption of polarly flagellated bacteria. In contrast, polarly flagellated bacteria enhanced the adsorption of V. cholerae. In competition experiments, where V. parahaemolyticus competed against increasing concentrations of other bacteria, polarly flagellated bacteria enhanced V. parahaemolyticus adsorption significantly, whereas laterally flagellated bacteria only slightly enhanced the process. The direct correlation observed between surface saturation kinetics, the production of lateral flagella, and the ability of laterally flagellated bacteria to inhibit the adsorption of polarly flagellated bacteria suggests that lateral flagella represent a component of bacterial structure that is important in the adsorption of laterally flagellated bacteria to surfaces. A model for adsorption events of laterally flagellated bacteria is proposed, based on the evidence presented.     

Functional properties of partially oxidized trout hemoglobins.

This paper reports on a study of the effect of partial oxidation on oxygen and carbon monoxide binding by components I and IV of trout hemoglobin. The O2 binding equilibria of the various oxidation mixtures show a decrease in the heme-heme interactions as the number of oxidized sites is increased. However, the large Bohr effect, characteristic of Hb Trout IV, is maintained unchanged. Similarly the time course of CO combination changes on increasing the fractional oxidation, and the autocatalytic character of the CO binding kinetics is lost; however the pH dependence of the apparent "on" constant in the oxidation mixtures is similar to that characteristic of the native molecule. The results of the O2 equilibria and of CO binding kinetics may be interpreted in accordance with the two state concerted model suggesting that in the oxidation intermediates there is an increase in the fraction of the high affinity (R) conformation. Additional experiments on the effect of azide, and fluoride, ferric ligands which produce a change of spin state of the heme iron, suggest that additional second order conformational changes may also come into play.     

Relationships of ligand binding,redox properties,and protonation in Coprinus cinereus peroxidase

The pH dependence of the redox potentials and kinetics for CO association and dissociation was determined between pH 3.0 and 13.0 at 25 degrees C for the wild-type Coprinus cinereus fungal peroxidase and for a site-directed mutant in which Asp245, which is H-bonded to N delta of the imidazole of the proximal His183, was substituted with Asn. The determination of these functional properties allowed this information to be merged in a self-consistent fashion and to formulate for the first time a complete scheme employing the minimum number of groups required to describe the whole proton-linked behavior of both redox and ligand binding properties. The overall pH dependence can be accounted for by four redox- and ligand-linked groups. The proximal H-bond, which is strictly conserved in all peroxidases, will still be present in the site-specific mutant, but will no longer have an ionic character, and this event will bring about an alteration of redox equilibria and CO binding kinetics, envisaging a relevant role played by this H-bond also in modulating redox properties and ligand binding equilibria.     

Gibbs-Ensemble Molecular Dynamics: A New Method for Simulations Involving Particle Exchange

We discuss a novel simulation method suitable for simulating phenomena involving particle exchange. The method is a molecular dynamics version of the Gibbs-Ensemble Monte Carlo technique, which has been developed some years ago for the direct simulation of phase equilibria in fluid systems. The idea is to have two separate simulation boxes, which can exchange particles or molecules in a thermodynamically consistent fashion. We discuss the general idea of the Gibbs-Ensemble Molecular Dynamics technique and present examples for different simple atomic and molecular fluids. Specifically we will discuss Gibbs-Ensemble Molecular Dynamics simulations of gas-liquid and liquid-solid equilibria in Lennard-Jones systems and in hexane as well as an application of the method to adsorption.     

Loss of adsorptive ability--the reason for inactivation of the RM2 bacteriophage during storage

The kinetics of bacteriophage PM2 inactivation at storage was compared with the kinetics of bacteriophage adsorption on Alteromonas espejiana BAL-31 host cells. Adsorption ability and infectivity are lost with the same rate at temperatures 4-28 degrees C suggesting the loss of adsorption ability to result in bacteriophage inactivation. At higher temperatures infectivity is lost more rapidly than the ability of adsorption. The single hit kinetics of adsorption ability loss suggests the simple model of independent inactivation of 12 antireceptors located at the tops of icosaedric capsid to be erroneous. At bacteriophage inactivation the major port of protein I, a fragment of antireceptors, is preserved in the capsid composition.