Studies on Mechano-Perception in Characean Cells: Development of a Monitoring Apparatus

An apparatus to monitor the electrical signal generated in Characells upon mechanical stimulation was developed. An internodalcell was stimulated by dropping a glass tubing with the intensityof the stimulus being controlled by changing either the weightof the glass tubing or the height from which it was dropped.Upon stimulation, a receptor potential was generated with theamplitude being dependent on the stimulus intensity. When thereceptor potential reached a threshold value, an action potentialwas generated. The receptor potential and action potential werecharacterized. The usefulness of this apparatus for analyzingreceptor potentials is discussed. (Received January 29, 1996; Accepted April 16, 1996)     

Device for miniscale isoelectric focusing of proteins

A simple device is developed for mini-scale electrofocusing of proteins. The main apparatus consists of only two glass tubes joined by a small tubing. No special cooling system, stopcocks, stands, etc., are needed. Even the need for a peristaltic pump for fractionation is eliminated. The apparatus does not require very high voltages and the amount of Ampholines is drastically reduced. The model can be used for analytical as well as semi-quantitative purposes.     

The mechanics of pulling a glass micropipette.

The pulling of micropipette electrodes from glass tubing has been treated as a problem of viscous flow coupled with the Newtonian dynamics of the pulling apparatus. Analytical solutions are given from which the taper profile, tip diameter, and pulling time can be obtained. The physical principles of operation of micropipette pullers are discussed.     

Investigating movement in the laboratory: dispersal apparatus designs and the red flour beetle,Tribolium castaneum

The natural dispersal of Tribolium castaneum Herbst (Coleoptera: Tenebrionidae) has been emulated in the laboratory for more than 50 years, using a simple dispersal apparatus. This has typically comprised of a starting container (initial resource or patch) connected by tubing, which contains thread for the animals to climb into a tube and hence to an end container. That is, beetles move to a new viable resource or patch from an inter‐patch zone or non‐viable habitat. We modified this basic apparatus design to test the effect of tubing length and tubing insertion angle on the dispersal rate and proportion of successful dispersers. We expected that the proportion of successful dispersers would be repeatable within each apparatus design, and that increasing tubing length and steepness of the insertion angle would reduce dispersal rate and success across apparatus designs. Dispersal increased linearly through time, similarly so for both males and females. The design with the most vertical tubing insertion angle had a lower proportion of successful dispersers. Tubing length also had a negative relationship with dispersal success (as judged by insects reaching the end container), but a significant reduction in dispersal success was only apparent between the shortest and longest tubing between containers. We suggest that locating and climbing the vertical section of string before they can enter the tubing between containers restricts dispersal and that at higher densities, insects exhibit greater inclination to climb. This type of apparatus has flexible design tolerances and further potential to study the dispersal of other small insect species that primarily use pedestrian locomotion.     

A Rapidly Assembled Liquid Chromatography Column

A simple and quick assembly of a chromatography column is described. Glass columns in a variety of sizes can be easily assembled from glass tubing and polyvinyl plastic tubing.     

A Holder for Simultaneous Fluid Processing or Carbon Coating of Electron Microscope Grids in Lots of 10 or More

A piece of polyethylene tubing about 14 cm long, ID 3 mm and with a 1.5 mm wall is shaped to hold grids in a linear series as follows. A series of pairs of transverse cuts I mm apart are made across and about $3/4 through the tubing at intervals of 1 cm. After making diagonal cuts on either side of each pair of cuts, wedge-shaped pieces of tubing are removed to leave free-standing 1 mm widths of the tubing wall. Each arch of wall is then bisected by a cut in the longitudinal direction of the tubing, thus providing the jaws of a clamp for a grid. By spreading the jaws with forceps, the grid can be inserted. On removal of the forceps, the grid is held firmly and when the holder is filled, the grids face in a direction perpendicular to its long dimension. By inserting a piece of glass tubing into the lumen of the holder, it is held straight and can be placed in a test tube for fluid processing. Stains or other fluids can be introduced through the glass tube, thus allowing fluid changes without exposure to air. Carbon coating can be achieved without removing the grids, since they all face the same way. For convenience in loading and unloading, the holder can be temporarily attached to a base with double-coated adhesive tape.     

A New Time-Saving Device for Embedding in Paraffin

A simple device to be used in place of the usual paper boxes or watch crystals used for embedding in paraffin in the preparation of histological sections is described. Short lengths of cooled rubber tubing are placed on a glass surface, which has previously been painted with glycerin, and are filled with melted paraffin. The rubber tubing sections are best cut by stretching the tubing on a wooden rod and cutting while the wood is turning in a lathe.     

A sensitive radiochemical assay for serum glutamic-oxaloacetic transaminase

A simple inexpensive hydraulic system for preparing uniform discontinuous gradients is described. The apparatus consists of five syringes, a three-way valve, plastic tubing, and three plastic rectangles. The apparatus is capable of delivering virtually any reasonable volume at any desired rate. It has been applied to the separation of platelets by centrifugation in discontinuous sucrose gradients.     

Alternative Procedure to Screening a Large Number of Plates for a Low Number of Mutants

An apparatus is described in which tygon tubing replaces the use of petri dishes in the screening of a large volume of agar for an expected low number of mutants.     

Diazomethane: improved analytical and distillation techniques for small quantities and some synthetic applications

An improved design of apparatus for the small-scale (about 5 μmol to about 50 mmol) preparation of diazomethane is described. The diazomethane is generated from commonly used precursors and distilled by aeration in a glass apparatus connected by Teflon tubing and without a condenser. A new simple and reasonably accurate procedure for assay of diazomethane is described. This depends on reaction with excess [¹⁴C]benzoic acid in toluene followed by quantitative removal of the excess acid by partitioning with pH 10 aqueous buffer and assaying the methyl [¹⁴C]benzoate in the toluene by liquid scintillation counting. Examples are given of the use of accurately known amounts of diazomethane and [¹⁴C] diazomethane for the preparation of methylated derivatives of [2-¹⁴C]barbital, 4′-hydroxy-[2-¹⁴C]phenobarbital, and mephobarbital. Small amount(s) of dimethyl-barbital (O-methyl) were separated and partly characterized by gas chromatography/mass spectroscopy and NMR.     

Analytical scanning isoelectrofocusing. 4. Design and operation of a column-filling apparatus

An apparatus was designed and constructed for filling an analytical isoelectrofocusing column in sequence with electrolytes, sucrose density gradient and sample. The column-filling apparatus (CFA) consists of a series of valves and syringes, a density gradient mixer, a syringe microburet operated at constant speed, and Teflon tubing. The sample is injected at any position of the density gradient with a microliter syringe through an injection port. Possibilities for complete automation of this device are discussed.     

Rapid Determination of Salmonella in Samples of Egg Noodles, Cake Mixes, and Candies

A glass apparatus system was compared with a standard enrichment broth-selective agar method to test samples of egg noodles, cake mixes, and candy for the presence or absence of salmonellae. The glass apparatus system used fermentation of mannitol, production of H(2)S, or motility, in conjunction with a serological test of flagellar antigens, to detect salmonellae. No salmonellae were detected in 173 samples of food products. Of these samples, 171 were found to be Salmonella-negative after 48 hr with the glass apparatus system. After 72 hr, the standard Salmonella procedure yielded 38 samples which produced Salmonella false-positive results on selective agars. Inoculation of samples with cultures of Salmonella showed that approximately one inoculated cell could be detected after 48 hr of incubation with the glass apparatus. The standard Salmonella test requires a minimum of 72 hr for completion. Compared with the standard Salmonella test, the glass apparatus system is a more rapid and simple system that can be used to determine the presence or absence of Salmonella in these food products.     

An economical bioreactor for evaluating biogas potential of particulate biomass

An economical bioreactor designed for evaluating the biogas potential of particulate biomass is described. The bioreactor uses a simple stirring apparatus, called the Bordeaux stirrer, to enable gas-tight mixing of fermentation cultures. The apparatus consists of a low-rpm motor connected to a bent steel stir rod, which is placed in a length of flexible plastic tubing inserted through a rubber stopper in a gas-tight manner. This stirrer is suitable for providing intermittent or continuous mixing in bench-scale anaerobic cultures containing particulate biomass. The reactor system may be operated as a batch-fed or semi-continuously fed digester. This communication documents the advantages of the stirring apparatus, describes the details of reactor fabrication and operation, and outlines the type of experimental work for which the bioreactor is suitable.     

Colonization of components of a model hot water system by Legionella pneumophila

A model hot water distribution network was seeded with a virulent strain of Legionella pneumophila serotype 1. Ten weeks after inoculation, components of the system, which include aluminium discs, copper, stainless steel, silicone tubing, rubber and glass beads, were examined for colonization by L. pneumophila. The samples were stained with fluorescein-labelled antibodies to the strain and were examined with scanning electron microscopy. Colonization, which was accompanied by copious quantities of a slime-like debris, was heaviest on the rubber and least on the copper. Adherence to silicone tubing and stainless steel was observed.     

Preparation ofClostridium septicum antigen for hyperimmunization of horses using a dialyzed culture

The preparation of toxic cultures of Clostridium septicum is described, using an apparatus with a straight dialysis tubing, where the medium is filled both into the nutrition and cultivation space of the apparatus. Using the cultivation to nutrition volume rate 1:2, mean titre of lethal antigen in filtrates 3.86 limes mortis per mL and 300 dosis lethalis minima per Lm was obtained in comparison with the values of 2.22 and 150 respectively in flask filtrates. Native filtrates of dialyzed cultures were better antigens for hyperimmunization of horses than the culture filtrates from flasks.     

Colonization of components of a model hot water system by Legionella pneumophila

A model hot water distribution network was seeded with a virulent strain of Legionella pneumophila serotype 1. Ten weeks after inoculation, components of the system, which include aluminium discs, copper, stainless steel, silicone tubing, rubber and glass beads, were examined for colonization by L. pneumophila. The samples were stained with fluorescein-labelled antibodies to the strain and were examined with scanning electron microscopy. Colonization, which was accompanied by copious quantities of a slime-like debris, was heaviest on the rubber and least on the copper. Adherence to silicone tubing and stainless steel was observed.     

High-speed bubble-segmented blood sampler for the rat

An arterial blood sampler for use in the conscious rat is described. With this apparatus it is possible to obtain small (10 microliter) whole-blood or plasma samples as frequently as 1/s and to derive accurate arterial time-concentration curves in the first 60-120 s after compounds are injected for regional blood flow or pharmacokinetic measurements. The blood is withdrawn from an implanted arterial catheter into polyethylene tubing at a constant rate while bubbles are introduced at regular intervals via a side channel into the column of blood. Although some dispersion of blood samples occurs as the tubing is traversed, this can be mathematically corrected. However, correction is unnecessary if the information of interest is the area under the time-concentration curve.     

Development of an automated plant culture system

An apparatus was constructed that could be used to grow plant tissues, organs, and whole plantlets under sterile conditions. This system accommodated independent or multiple concurrent growth of cultures. Growth of plants either equalled or exceeded that observed using the manual transfer procedure. The automated plant culture system (APCS) consists of silicone tubing, 2 impeller pumps, 2 glass medium reservoir bottles, a 3-way stainless steel valve, a plant culture chamber, and an interface module containing relay boards. Control of the APCS is through interfacing with a microcomputer (e.g. Apple IIe or Atari 400). The computer controlled medium introduction, evacuation, and replenishment in a sterile environment. The APCS was inexpensively constructed and provides a labor-saving, long-term method to culture plants in vitro.Mention of a trade name or proprietary product in the paper does not constitute a guarantee or warranty of the product by the US Department of Agriculture and does not imply its approval to the exclusion of other products that may also be suitable.     

A forced-air individually ventilated caging system for rodents

The practice of using a protective filter apparatus when housing five mice per cage resulted in ammonia levels exceeding 25 ppm. A forced-air individually ventilated caging system was constructed using polyvinyl-chloride tubing fitted to a rodent rack. The ammonia level was decreased using this ventilation system.     

Use of a glass electrode for measuring rapid changes in photosynthetic rates

1. A continuously recording glass electrode apparatus has been described for measuring carbon dioxide concentration changes in solution. The limits of applicability of the apparatus have been analyzed. 2. The glass electrode apparatus has been used for the measurement of transient rates of photosynthesis by algal suspensions. 3. The decline of the photosynthetic rate in high light at carbon dioxide partial pressures less than 0.5 per cent atmosphere, observed in the glass electrode apparatus, has been confirmed by steady state experiments in which flowing gas streams were analyzed.