Micro-CT Analysis of Experimental <Emphasis Type="Italic">Candida</Emphasis> Osteoarthritis in Rats

Experimental osteoarthritis induced by Candida albicans in rats was studied using micro-computed tomography (micro-CT). When C. albicans cells at a nonlethal dose were intravenously injected into 40 rats, joint swelling was induced in 24 rats. Two or more joints were affected in 10 of the 24 rats. Tarsal regions of the hind paw were affected most frequently, followed by elbows of the fore paw. Micro-CT analysis in vivo showed that erosions of the affected tarsal joint bones were apparent several days after the onset of swelling. Thereafter, severe surface roughness and disintegration in the joint bones progressed during the development of arthritis. Three-dimensional (3D) trabecular microstructures and changes in 3D bone parameters were characterized ex vivo with calcanei from affected hind paws. Three-dimensional morphology showed coarsening of the trabecular distribution and weakening of the trabecular connectivity in arthritic bones. These morphological changes were quantitatively confirmed by changes in 3D bone parameters measured from consecutively scanned bone slices. Micro-CT has been shown to be useful for quantifying morphological changes occurring in Candida arthritic bones.     

Application of surface roughness analysis on micro-computed tomographic images of bone erosion: examples using a rodent model of rheumatoid arthritis

Quantifying the bone erosion in preclinical models of rheumatoid arthritis is valuable for the evaluation of drug treatments. This study introduces a three-dimensional method for bone surface roughness measurement from micro-computed tomographic data obtained from rats subjected to collagen-induced arthritis (CIA), in which the degree of bone erosion is related to the severity and the duration of the disease. In two studies of rat CIA, the surface roughness of the talus bone following 21 days of disease increased 559% and 486% from the control group. At 41 days following disease induction, the roughness of the bone surface increased 857% above baseline. The roughness of the control samples was similar from each study (less than 4% different), demonstrating the robustness of the algorithm. Treatment with methotrexate at 0.1 mg/kg daily demonstrated significant protection from bone erosion, whereas the 0.05 mg/kg daily dose was not efficacious (98% versus 22% inhibition of roughness-measured bone erosion). The main advantage of such an algorithm is demonstrated in the preclinical drug study of rat CIA with methotrexate treatment, indicating the immediate utility of this approach in drug development studies.     

Microcomputed tomography imaging of skeletal development and growth

Skeletogenesis is an exquisitely orchestrated and dynamic process, culminating in the formation of highly variable and complex mineralized structures that are optimized for their function. While cellular and molecular biology studies have provided tremendous recent progress toward understanding how patterns of bone formation are regulated, high resolution imaging techniques such as microcomputed tomography (micro-CT) can provide complementary quantitative information about the progressive changes in three-dimensional (3-D) skeletal morphology and density that occur during early skeletal development and postnatal growth. Furthermore, recently developed in vivo micro-CT systems promise to be a powerful and efficient tool for noninvasively monitoring normal skeletogenesis, as well as for evaluating the effects of genetic or environmental manipulation. This review focuses on the use of micro-CT imaging and analysis to better understand normal and abnormal skeletal development and growth.     

Effect of auranofin treatment on aberrant splenic interleukin production in adjuvant arthritic rats

Adjuvant-induced arthritis (AA) in rats is associated with a number of immunologic abnormalities which include a marked decrease in spleen cell mitogenic responses. In this study we investigated the altered production of interleukins in arthritic rats and evaluated the effects of auranofin treatment on disease progression and aberrant interleukin production. The capacity of the AA rat spleen cells to produce interleukin (IL) 2 and IL-3 was found to decrease during the development of the arthritic lesion, with maximum suppression occurring 16 to 17 days after adjuvant injection. In contrast, the production of IL-1 by splenic adherent cells from arthritic rats was markedly increased. Prophylactic treatment of AA rats with auranofin resulted in a slight reduction in paw edema, a complete normalization of the depressed IL-2 production, and a reduction of the elevated IL-1 production, but had no effect on the depressed IL-3 production. In contrast, auranofin administered to normal rats, in the same dosing regimen, did not affect interleukin production. Therapeutic administration of auranofin to AA rats with established disease resulted in normalization of IL-1 production without affecting the suppressed IL-2 and IL-3 levels. In contrast, while indomethacin treatment effectively decreased paw edema, it did not appreciably affect the systemic aberrant interleukin production. Taken together, these results suggest that disease-associated abnormalities in interleukin production may be mediated by different mechanisms with differential sensitivity to the effects of the disease-modifying drug auranofin. Furthermore, defining the relationship between drug-mediated normalization of aberrant immune parameters and clinical improvement will provide a basis for the elucidation of the mechanism of action of disease-modifying antiarthritic drugs as well as for assessment of clinical efficacy of drug treatment.     

Detection of fatigue microdamage in whole rat femora using contrast-enhanced micro-computed tomography

Microdamage in bone tissue is typically studied using destructive, two-dimensional histological techniques. Contrast-enhanced micro-computed tomography (micro-CT) was recently demonstrated to enable non-destructive, three-dimensional (3-D) detection of microdamage in machined cortical and trabecular bone specimens in vitro. However, the accumulation of microdamage in whole bones is influenced by variations in the magnitude and mode of loading due to the complex whole bone morphology. Therefore, the objective of this study was to detect the presence, spatial location, and accumulation of fatigue microdamage in whole rat femora in vitro using micro-CT with a BaSO₄ contrast agent. Microdamage was detected and observed to accumulate at specific spatial locations within the cortex of femora loaded in cyclic three-point bending to a 5% or 10% reduction in secant modulus. The ratio of the segmented BaSO₄ stain volume (SV) to the total volume (TV) of cortical bone was adopted as a measure of damage. The amount of microdamage measured by micro-CT (SV/TV) was significantly greater for both loaded groups compared to the control group (p<0.05), but the difference between loaded groups was not statistically significant. At least one distinct region of microdamage, as indicated by the segmented SV, was observed in 85% of loaded specimens. A specimen-specific finite element model confirmed elevated tensile principal strains localized in regions of tissue corresponding to the accumulated microdamage. These regions were not always located where one might expect a priori based upon Euler–Bernoulli beam theory, demonstrating the utility of contrast-enhanced micro-CT for non-destructive, 3-D detection of fatigue microdamage in whole bones in vitro.     

Delayed Contrast Enhancement Imaging of a Murine Model for Ischemia Reperfusion with Carbon Nanotube Micro-CT

We aim to demonstrate the application of free-breathing prospectively gated carbon nanotube (CNT) micro-CT by evaluating a myocardial infarction model with a delayed contrast enhancement technique. Evaluation of murine cardiac models using micro-CT imaging has historically been limited by extreme imaging requirements. Newly-developed CNT-based x-ray sources offer precise temporal resolution, allowing elimination of physiological motion through prospective gating. Using free-breathing, cardiac-gated CNT micro-CT, a myocardial infarction model can be studied non-invasively and with high resolution. Myocardial infarction was induced in eight male C57BL/6 mice aged 8–12 weeks. The ischemia reperfusion model was achieved by surgically occluding the LAD artery for 30 minutes followed by 24 hours of reperfusion. Tail vein catheters were placed for contrast administration. Iohexol 300mgI/mL was administered followed by images obtained in diastole. Iodinated lipid blood pool contrast agent was then administered, followed with images at systole and diastole. Respiratory and cardiac signals were monitored externally and used to gate the scans of free-breathing subjects. Seven control animals were scanned using the same imaging protocol. After imaging, the heart was harvested, cut into 1mm slices and stained with TTC. Post-processing analysis was performed using ITK-Snap and MATLAB. All animals demonstrated obvious delayed contrast enhancement in the left ventricular wall following the Iohexol injection. The blood pool contrast agent revealed significant changes in cardiac function quantified by 3-D volume ejection fractions. All subjects demonstrated areas of myocardial infarct in the LAD distribution on both TTC staining and micro-CT imaging. The CNT micro-CT system aids straightforward, free-breathing, prospectively-gated 3-D murine cardiac imaging. Delayed contrast enhancement allows identification of infarcted myocardium after a myocardial ischemic event. We demonstrate the ability to consistently identify areas of myocardial infarct in mice and provide functional cardiac information using a delayed contrast enhancement technique.     

Synchrotron radiation micro-CT at the micrometer scale for the analysis of the three-dimensional morphology of microcracks in human trabecular bone

Bone quality is an important concept to explain bone fragility in addition to bone mass. Among bone quality factors, microdamage which appears in daily life is thought to have a marked impact on bone strength and plays a major role in the repair process. The starting point for all studies designed to further our understanding of how bone microdamage initiate or dissipate energy, or to investigate the impact of age, gender or disease, remains reliable observation and measurement of microdamage. In this study, 3D Synchrotron Radiation (SR) micro-CT at the micrometric scale was coupled to image analysis for the three-dimensional characterization of bone microdamage in human trabecular bone specimens taken from femoral heads. Specimens were imaged by 3D SR micro-CT with a voxel size of 1.4 μm. A new tailored 3D image analysis technique was developed to segment and quantify microcracks. Microcracks from human trabecular bone were observed in different tomographic sections as well as from 3D renderings. New 3D quantitative measurements on the microcrack density and morphology are reported on five specimens. The 3D microcrack density was found between 3.1 and 9.4/mm3 corresponding to a 2D density between 0.55 and 0.76 /mm2. The microcrack length and width measured in 3D on five selected microcrack ranged respectively from 164 μm to 209 μm and 100 μm to 120 μm. This is the first time that various microcracks in unloaded human trabecular bone--from the simplest linear crack to more complex cross-hatch cracks--have been examined and quantified by 3D imaging at this scale. The suspected complex morphology of microcracks is here considerably more evident than in the 2D observations. In conclusion, this technique opens new perspective for the 3D investigation of microcracks and the impact of age, disease or treatment.     

A Non-Destructive Method for Distinguishing Reindeer Antler (Rangifer tarandus) from Red Deer Antler (Cervus elaphus) Using X-Ray Micro-Tomography Coupled with SVM Classifiers

Over the last decade, biomedical 3D-imaging tools have gained widespread use in the analysis of prehistoric bone artefacts. While initial attempts to characterise the major categories used in osseous industry (i.e. bone, antler, and dentine/ivory) have been successful, the taxonomic determination of prehistoric artefacts remains to be investigated. The distinction between reindeer and red deer antler can be challenging, particularly in cases of anthropic and/or taphonomic modifications. In addition to the range of destructive physicochemical identification methods available (mass spectrometry, isotopic ratio, and DNA analysis), X-ray micro-tomography (micro-CT) provides convincing non-destructive 3D images and analyses. This paper presents the experimental protocol (sample scans, image processing, and statistical analysis) we have developed in order to identify modern and archaeological antler collections (from Isturitz, France). This original method is based on bone microstructure analysis combined with advanced statistical support vector machine (SVM) classifiers. A combination of six microarchitecture biomarkers (bone volume fraction, trabecular number, trabecular separation, trabecular thickness, trabecular bone pattern factor, and structure model index) were screened using micro-CT in order to characterise internal alveolar structure. Overall, reindeer alveoli presented a tighter mesh than red deer alveoli, and statistical analysis allowed us to distinguish archaeological antler by species with an accuracy of 96%, regardless of anatomical location on the antler. In conclusion, micro-CT combined with SVM classifiers proves to be a promising additional non-destructive method for antler identification, suitable for archaeological artefacts whose degree of human modification and cultural heritage or scientific value has previously made it impossible (tools, ornaments, etc.).     

Effect of coenzyme Q(10) supplementation in the rat model of adjuvant arthritis

Adjuvant arthritis (AA) is a model of chronic inflammation induced by Mycobacterium butyricum and characterized by similar pathophysiological and pathobiochemical changes as rheumatoid arthritis (RA) in humans. In this study the antirheumatic activity of coenzyme Q(10) supplementation was tested not only as to its capability to suppress the inflammation edema of the hind paw and to improve the body weight of the arthritic animals, but also to improve so important biochemical parameters as markers of inflammation and oxidative stress, and of mitochondrial bioenergetics. Despite the unfavorable effects on the rheumatic processes observed by monitoring biometric parameters (hind paw volume, relative body weight, relative weight of spleen), a significant protective effect was observed on the level of mitochondrial energetic and antioxidant disbalance. This finding speaks in favor of CoQ(10) supplementation in rheumatic patients, presumably as combinatory therapy with classical antirheumatics, e.g. NSAIDs.     

Impact-induced osteochondral fracture in the tibial plateau

In this study, human tibia plateaus with the meniscus removed were impacted on various regions of the plateau surface via a drop test using a 5mm indenter. Osteochondral blocks containing the failure site were then extracted, chemically fixed, dehydrated, gold-particle coated, and sent for X-ray micro-CT imaging to obtain 3-D image reconstructions of the cartilage and underlying bone. Cartilage failure upon impact appeared to be characteristically brittle in nature. Impacted cartilage from the region not protected by the meniscus showed a relatively large cavernous disruption with microcrack propagation extending radially into the subchondral bone, while impacted cartilage from beneath the meniscus showed less dramatic surface disruption and with no underlying bone failure.     

Micro-CT of rodents: State-of-the-art and future perspectives

Micron-scale computed tomography (micro-CT) is an essential tool for phenotyping and for elucidating diseases and their therapies. This work is focused on preclinical micro-CT imaging, reviewing relevant principles, technologies, and applications. Commonly, micro-CT provides high-resolution anatomic information, either on its own or in conjunction with lower-resolution functional imaging modalities such as positron emission tomography (PET) and single-photon emission computed tomography (SPECT). More recently, however, advanced applications of micro-CT produce functional information by translating clinical applications to model systems (e.g. measuring cardiac functional metrics) and by pioneering new ones (e.g. measuring tumor vascular permeability with nanoparticle contrast agents). The primary limitations of micro-CT imaging are the associated radiation dose and relatively poor soft tissue contrast. We review several image reconstruction strategies based on iterative, statistical, and gradient sparsity regularization, demonstrating that high image quality is achievable with low radiation dose given ever more powerful computational resources. We also review two contrast mechanisms under intense development. The first is spectral contrast for quantitative material discrimination in combination with passive or actively targeted nanoparticle contrast agents. The second is phase contrast which measures refraction in biological tissues for improved contrast and potentially reduced radiation dose relative to standard absorption imaging. These technological advancements promise to develop micro-CT into a commonplace, functional and even molecular imaging modality.     

Accuracy of cancellous bone volume fraction measured by micro-CT scanning

Volume fraction, the single most important parameter in describing trabecular microstructure, can easily be calculated from three-dimensional reconstructions of micro-CT images. This study sought to quantify the accuracy of this measurement. One hundred and sixty human cancellous bone specimens which covered a large range of volume fraction (9.8-39.8%) were produced. The specimens were micro-CT scanned, and the volume fraction based on Archimedes' principle was determined as a reference. After scanning, all micro-CT data were segmented using individual thresholds determined by the scanner supplied algorithm (method I). A significant deviation of volume fraction from method I was found: both the y-intercept and the slope of the regression line were significantly different from those of the Archimedes-based volume fraction (p < 0.001). New individual thresholds were determined based on a calibration of volume fraction to the Archimedes-based volume fractions (method II). The mean thresholds of the two methods were applied to segment 20 randomly selected specimens. The results showed that volume fraction using the mean threshold of method I was underestimated by 4% (p = 0.001), whereas the mean threshold of method II yielded accurate values. The precision of the measurement was excellent. Our data show that care must be taken when applying thresholds in generating 3-D data, and that a fixed threshold may be used to obtain reliable volume fraction data. This fixed threshold may be determined from the Archimedes-based volume fraction of a subgroup of specimens. The threshold may vary between different materials, and so it should be determined whenever a study series is performed.     

In Vivo Quantitative Microcomputed Tomographic Analysis of Vasculature and Organs in a Normal and Diseased Mouse Model

Non-bone in vivo micro-CT imaging has many potential applications for preclinical evaluation. Specifically, the in vivo quantification of changes in the vascular network and organ morphology in small animals, associated with the emergence and progression of diseases like bone fracture, inflammation and cancer, would be critical to the development and evaluation of new therapies for the same. However, there are few published papers describing the in vivo vascular imaging in small animals, due to technical challenges, such as low image quality and low vessel contrast in surrounding tissues. These studies have primarily focused on lung, cardiovascular and brain imaging. In vivo vascular imaging of mouse hind limbs has not been reported. We have developed an in vivo CT imaging technique to visualize and quantify vasculature and organ structure in disease models, with the goal of improved quality images. With 1–2 minutes scanning by a high speed in vivo micro-CT scanner (Quantum CT), and injection of a highly efficient contrast agent (Exitron nano 12000), vasculature and organ structure were semi-automatically segmented and quantified via image analysis software (Analyze). Vessels of the head and hind limbs, and organs like the heart, liver, kidneys and spleen were visualized and segmented from density maps. In a mouse model of bone metastasis, neoangiogenesis was observed, and associated changes to vessel morphology were computed, along with associated enlargement of the spleen. The in vivo CT image quality, voxel size down to 20 μm, is sufficient to visualize and quantify mouse vascular morphology. With this technique, in vivo vascular monitoring becomes feasible for the preclinical evaluation of small animal disease models.     

Novel model of restricted mobility induced osteopenia in zebrafish

Immobilization, such as prolonged bed rest, is a risk factor for bone loss in humans. Motivated by the emerging utility of zebrafish (Danio rerio) as an animal of choice for the study of musculoskeletal disease, here we report a model of restricted mobility induced osteopenia in adult zebrafish. Aquatic tanks with small cubical compartments to restrict the movement and locomotion of single fish were designed and fabricated for this study. Adult zebrafish were divided into two groups: a normal control (CONT) and a restricted mobility group (RMG) (18 fish/group). Six fish from each group were euthanized on days 14, 21 and 35 of the movement restriction. By using microcomputed tomography (micro-CT), we assessed bone volume/tissue volume (BV/TV) and bone density in the whole skeleton of the fish. Furthermore, we assessed skeletal shape in the vertebrae (radius, length, volume, neural and haemal arch aperture areas, neural and haemal arch angle, and thickness of the intervertebral space), single vertebra bone volume and bone density. Movement restriction significantly decreased vertebral skeletal parameters such as radius, length, volume, arch aperture areas and angles as well as the thickness of the intervertebral space in RMG. Furthermore, restricted mobility significantly (P < 0.001) decreased BV/TV and bone density as compared to the CONT group, starting as early as 14 days. By analysing zebrafish from CONT and RMG, we show that micro-CT imaging is a sensitive method to quantify distinct skeletal properties in zebrafish. We further defined the micro-CT parameters which can be used to examine the effects of restricted mobility on the skeleton of the fish. Our findings propose a rapid and effective osteopenia “stabulation” model, which could be used widely for osteoporosis drug screening.     

Quantification of adiposity in small rodents using micro-CT

Non-invasive three-dimensional imaging of live rodents is a powerful research tool that has become critical for advances in many biomedical fields. For investigations into adipose development, obesity, or diabetes, accurate and precise techniques that quantify adiposity in vivo are critical. Because total body fat mass does not accurately predict health risks associated with the metabolic syndrome, imaging modalities should be able to stratify total adiposity into subcutaneous and visceral adiposity. Micro-computed tomography (micro-CT) acquires high-resolution images based on the physical density of the material and can readily discriminate between subcutaneous and visceral fat. Here, a micro-CT based method to image the adiposity of live rodents is described. An automated and validated algorithm to quantify the volume of discrete fat deposits from the computed tomography is available. Data indicate that scanning the abdomen provides sufficient information to estimate total body fat. Very high correlations between micro-CT determined adipose volumes and the weight of explanted fat pads demonstrate that micro-CT can accurately monitor site-specific changes in adiposity. Taken together, in vivo micro-CT is a non-invasive, highly quantitative imaging modality with greater resolution and selectivity, but potentially lower throughput, than many other methods to precisely determine total and regional adipose volumes and fat infiltration in live rodents.     

Anti-Arthritic Effect of Chebulanin on Collagen-Induced Arthritis in Mice

Rheumatoid arthritis is a chronic degenerative autoimmune disease characterized by persistent inflammation of synovial membranes, which leads to cartilage destruction and bone erosion. To date, there are no effective therapies to slow the progress of this degenerative condition. Here, we evaluate the anti-arthritic effect of chebulanin, an abundant anti-inflammatory agent isolated from Terminalia chebula, in collagen induced arthritis in DBA/1 mice by intragastric administration. Arthritic severity was scored by performing histopathological evaluation of the joints and measuring the expression of inflammatory cytokines and relative enzymes by immunohistochemical staining. In parallel, bone destruction and erosion were confirmed by micro-CT. Our data revealed that chebulanin significantly improved the severity of arthritis. Specifically, the histopathological characteristics of the tissues were improved and expression of TNF-α, IL-6, MMP-3 and COX-2 in the paws and joints of the treated mice decreased in a dose-dependent manner compared with control mice. Furthermore, micro-CT analysis revealed that chebulanin induced a dose-dependent reduction in cartilage destruction and bone erosion. Taken together, our findings suggest that chebulanin suppresses the expression of inflammatory mediators and prevents cartilage destruction and bone erosion in mice. Therefore, chebulanin is a strong therapeutic alternative for the treatment of RA.     

A novel 3D mouse embryo atlas based on micro-CT

The goal of the International Mouse Phenotyping Consortium (IMPC) is to phenotype targeted knockout mouse strains throughout the whole mouse genome (23,000 genes) by 2021. A significant percentage of the generated mice will be embryonic lethal; therefore, phenotyping methods tuned to the mouse embryo are needed. Methods that are robust, quantitative, automated and high-throughput are attractive owing to the numbers of mice involved. Three-dimensional (3D) imaging is a useful method for characterizing morphological phenotypes. However, tools to automatically quantify morphological information of mouse embryos from 3D imaging have not been fully developed. We present a representative mouse embryo average 3D atlas comprising micro-CT images of 35 individual C57BL/6J mouse embryos at 15.5 days post-coitum. The 35 micro-CT images were registered into a consensus average image with our automated image registration software and 48 anatomical structures were segmented manually. We report the mean and variation in volumes for each of the 48 segmented structures. Mouse organ volumes vary by 2.6-4.2% on a linear scale when normalized to whole body volume. A power analysis of the volume data reports that a 9-14% volume difference can be detected between two classes of mice with sample sizes of eight. This resource will be crucial in establishing baseline anatomical phenotypic measurements for the assessment of mutant mouse phenotypes, as any future mutant embryo image can be registered to the atlas and subsequent organ volumes calculated automatically.     

In Vivo Optical Imaging of Brain Tumors and Arthritis Using Fluorescent SapC-DOPS Nanovesicles

We describe a multi-angle rotational optical imaging (MAROI) system for in vivo monitoring of physiopathological processes labeled with a fluorescent marker. Mouse models (brain tumor and arthritis) were used to evaluate the usefulness of this method. Saposin C (SapC)-dioleoylphosphatidylserine (DOPS) nanovesicles tagged with CellVue Maroon (CVM) fluorophore were administered intravenously. Animals were then placed in the rotational holder (MARS) of the in vivo imaging system. Images were acquired in 10° steps over 380°. A rectangular region of interest (ROI) was placed across the full image width at the model disease site. Within the ROI, and for every image, mean fluorescence intensity was computed after background subtraction. In the mouse models studied, the labeled nanovesicles were taken up in both the orthotopic and transgenic brain tumors, and in the arthritic sites (toes and ankles). Curve analysis of the multi angle image ROIs determined the angle with the highest signal. Thus, the optimal angle for imaging each disease site was characterized. The MAROI method applied to imaging of fluorescent compounds is a noninvasive, economical, and precise tool for in vivo quantitative analysis of the disease states in the described mouse models.     

A technique for the quantification of the 3D connectivity of thin articulations in Bony sutures

The anatomy and development of cranial and facial sutures have been studied in detail using histological sections, 2D radiographs and more recently CT imaging. However, little attention has been paid to evaluating and quantifying the connectivity of these thin cortical bone articulations. More recent technological advances such as micro-CT imaging has the potential to be used to provide quantitative measurements of 3D connectivity in bony articulations. This study presents a new technique for quantifying the connectivity of bony projections inside cranial and facial sutures using a combination of skeletonization, thinning algorithms and 3D intensity mapping. The technique is demonstrated in five sutures through semi-automated analysis and image processing of μCT scans. In the sagittal, coronal and frontozygomatic sutures an average bone connectivity of 6.6–11.6% was found with multiple bony projections providing an interlocking structure between adjacent bones. Much higher bone connectivity was present in the zygomaticotemporal and zygomaticomaxillary sutures (22.7–37.4%) with few bony projections. This method combining μCT scanning and image processing techniques was successfully used to quantify the connectivity of thin bone articulations and allowed detailed assessment of sutural fusion in 3D. The wider application of this technique may allow quantification of connectivity in other structures, in particular fracture healing of long bones.     

Identification of blood biomarkers of rheumatoid arthritis by transcript profiling of peripheral blood mononuclear cells from the rat collagen-induced arthritis model

Rheumatoid arthritis (RA) is a chronic debilitating autoimmune disease that results in joint destruction and subsequent loss of function. To better understand its pathogenesis and to facilitate the search for novel RA therapeutics, we profiled the rat model of collagen-induced arthritis (CIA) to discover and characterize blood biomarkers for RA. Peripheral blood mononuclear cells (PBMCs) were purified using a Ficoll gradient at various time points after type II collagen immunization for RNA preparation. Total RNA was processed for a microarray analysis using Affymetrix GeneChip technology. Statistical comparison analyses identified differentially expressed genes that distinguished CIA from control rats. Clustering analyses indicated that gene expression patterns correlated with laboratory indices of disease progression. A set of 28 probe sets showed significant differences in expression between blood from arthritic rats and that from controls at the earliest time after induction, and the difference persisted for the entire time course. Gene Ontology comparison of the present study with previous published murine microarray studies showed conserved Biological Processes during disease induction between the local joint and PBMC responses. Genes known to be involved in autoimmune response and arthritis, such as those encoding Galectin-3, Versican, and Socs3, were identified and validated by quantitative TaqMan RT-PCR analysis using independent blood samples. Finally, immunoblot analysis confirmed that Galectin-3 was secreted over time in plasma as well as in supernatant of cultured tissue synoviocytes of the arthritic rats, which is consistent with disease progression. Our data indicate that gene expression in PBMCs from the CIA model can be utilized to identify candidate blood biomarkers for RA.