The simple and sensitive measurement of malondialdehyde in selected specimens of biological origin and some feed by reversed phase high performance liquid chromatography

A method for the determination of malondialdehyde (MDA) concentrations in specimens of animal tissues and feed has been developed using high performance liquid chromatography. The MDA concentration in acidified urine samples was determined after its conversion with 2,4-dinitrophenylhydrazine (DNPH) to a hydrazone (MDA-DNPH). Samples of blood plasma, muscle, liver and feed were prepared by saponification followed by derivatisation with DNPH to MDA-DNPH. The MDA concentration in chicken and hen feed samples was analysed after saponification and derivatisation followed by extractions with hexane. The free MDA in plasma samples was determined after deproteinization followed by derivatisation of MDA with DNPH. The chromatographic separation of MDA-DNPH samples was conducted using Phenomenex C(18)-columns (Synergi 2.5 μm, Hydro-RP, 100 ?, the length of 100mm) with an inner diameter of 2 or 3mm. MDA in processed biological samples was analysed using a linear gradient of acetonitrile in water, and the photodiode detector was set to 307 or 303 nm for detection. The current method that was utilised was based on the high-efficient derivatisation of MDA and was more sensitive compared to previously used methods. The selective and sensitive photodetection of the column effluent was found to be suitable for the routine analysis of MDA in urine, plasma, muscles and liver of animals and some feed samples. Because urine or blood plasma samples can be derivatised in a simple manner, the proposed method can also be suitable for the routine, non-invasive evaluation of oxidative stress in animals and humans.     

Recovery of malondialdehyde in urine as a 2,4-dinitrophenylhydrazine derivative analyzed with high-performance liquid chromatography

Malondialdehyde (MDA) in urine was measured as a 2,4-dinitrophenylhydrazine (DNPH) derivative using high-performance liquid chromatography (HPLC) for the analysis. MDA standard coeluted with a peak obtained from rat urine after i.p. administration of MDA standard. This peak was also the only peak containing 14C after injection of a [14C]MDA standard, and was shown by mass spectrometry to contain 1-(2,4-dinitrophenyl)pyrazole, the derivative formed when MDA is treated with DNPH. Depending on the amount given (0.3-5.5 mumol), the recovery (after 24 h sampling period) in urine was 0.7-2.6%. This apparent non-linear kinetics may relate to several factors, such as dose-dependent metabolism. However, the peak urinary concentration approached the expected plasma concentration and reproducible recovery data were obtained, suggesting that MDA was passively excreted in a reasonably stable form. These data indicate that monitoring MDA excretion in urine can give useful information about lipid peroxidation in vivo.     

Methyl malondialdehyde is not suitable as an internal standard for malondialdehyde detection in urine after derivatisation with 2,4-dinitrophenylhydrazine

A previously described method of measurement of malondialdehyde (MDA) in human urine after derivatisation with 2,4-dinitrophenylhydrazine (DNPH) was tested for a possibility of using methyl malondialdehyde (MeMDA) as an internal standard. Despite structural similarity, those compounds were found to produce different yields of derivatisation under the same conditions depending on urine matrix. We conclude, that MeMDA is not suitable as an internal standard for the measurement of MDA in urine under previously reported conditions when DNPH is used as a deriviatising agent.     

Accurate quantification of dimethylamine (DMA) in human urine by gas chromatography-mass spectrometry as pentafluorobenzamide derivative: evaluation of the relationship between DMA and its precursor asymmetric dimethylarginine (ADMA) in health and disease

Dimethylamine [DMA, (CH(3))(2)NH)] is abundantly present in human urine. Main sources of urinary DMA have been reported to include trimethylamine N-oxide, a common food component, and asymmetric dimethylarginine (ADMA), an endogenous inhibitor of nitric oxide (NO) synthesis. ADMA is excreted in the urine in part unmetabolized and in part after hydrolysis to DMA by dimethylarginine dimethylaminohydrolase (DDAH). Here we describe a GC-MS method for the accurate and rapid quantification of DMA in human urine. The method involves use of (CD(3))(2)NH as internal standard, simultaneous derivatization with pentafluorobenzoyl chloride and extraction in toluene, and selected-ion monitoring of m/z 239 for DMA and m/z 245 for (CD(3))(2)NH in the electron ionization mode. GC-MS analysis of urine samples from 10 healthy volunteers revealed a DMA concentration of 264+/-173 microM equivalent to 10.1+/-1.64 micromol/mmol creatinine. GC-tandem MS analysis of the same urine samples revealed an ADMA concentration of 27.3+/-15.3 microM corresponding to 1.35+/-1.2 micromol/mmol creatinine. In these volunteers, a positive correlation (R=0.83919, P=0.0024) was found between urinary DMA and ADMA, with the DMA/ADMA molar ratio being 10.8+/-6.2. Elevated excretion rates of DMA (52.9+/-18.5 micromol/mmol creatinine) and ADMA (3.85+/-1.65 micromol/mmol creatinine) were found by the method in 49 patients suffering from coronary artery disease, with the DMA/ADMA molar ratio also being elevated (16.8+/-12.8). In 12 patients suffering from end-stage liver disease, excretion rates of DMA (47.8+/-19.7 micromol/mmol creatinine) and ADMA (5.6+/-1.5 micromol/mmol creatinine) were found to be elevated, with the DMA/ADMA molar ratio (9.17+/-4.2) being insignificantly lower (P=0.46). Between urinary DMA and ADMA there was a positive correlation (R=0.6655, P<0.0001) in coronary artery disease, but no correlation (R=0.27339) was found in end-stage liver disease.     

Effects of arsenic exposure among semiconductor workers: a cautionary note on urinary 8-oxo-7,8-dihydro-2'-deoxyguanosine

Arsenic is a notorious environmental toxicant and was found to cause oxidative stress in cultured cells and animals. However, little work has been done in human studies, especially for the population occupationally exposed to arsenic. In order to investigate the effect of occupational exposure to arsenic in oxidative stress, we measured urinary 8-oxo-7,8-dihydro-2'-deoxyguanosine (8-oxodGuo) from 90 semiconductor workers including 50 exposed and 40 nonexposed subjects. A highly sensitive and specific isotope dilution LC-MS/MS method was used for quantification of 8-oxodGuo. The levels of inorganic arsenic (iAs3+, iAs5+), monomethylarsonic acid (MMA), and dimethylarsinic acid (DMA) in urine were determined by high-performance liquid chromatography-flow injection atomic absorption spectrometry (HPLC-FIAAS). Results showed that the mean urinary concentrations of total arsenic and 8-oxodGuo were significantly higher for exposed workers compared with the nonexposed workers. In addition, elevated urinary 8-oxodGuo concentrations of exposed workers were correlated with urinary levels of MMA (r = 0.44, P < 0.005) and the extent of primary methylation (the ratio of MMA to inorganic arsenic) (r = 0.40, P < 0.005). These findings suggested that occupational exposure to arsenic could result in the induction of oxidative stress. The presence and/or formation of MMA could play an important role in arsenic-involved injuries.     

Automated method for determination of glutardialdehyde residues in flexible endoscopes after disinfection

Glutardialdehyde (GDA) is the most commonly used disinfectant for flexible endoscopes. After inappropriate rinsing of endoscopes residual GDA in the narrow endoscope channels may lead to toxic effects in patients. Common methods for determination of aldehydes in water involve derivatization with 2,4-dinitrophenylhydrazine (DNPH), liquid-liquid or solid-phase extraction and HPLC determination. Since derivatization and extraction is both time-consuming and labor-intensive only a small number of samples can be measured. Thus, we developed a fully automated method which includes a conventional HPLC system, a programmable autosampler, and UV detection. After GDA derivatization using DNPH the samples remain in the aqueous phase and no preconcentration of the analyte is necessary. The samples are automatically derivatized through the autosampler. While derivatization in one sample takes place the previous sample is injected and measured by HPLC. Our method is well suited for screening residual GDA in endoscopes as it is both time- and labor-saving.     

Evaluation of Alternate Isotope-Coded Derivatization Assay (AIDA) in the LC–MS/MS analysis of aldehydes in exhaled breath condensate

We present the application of a novel isotope dilution method, named Alternate Isotope-Coded Derivatization Assay (AIDA), to the quantitative analysis of hydrazone derivatives of malondialdehyde (MDA) and 4-hydroxynonenal (4-HNE) in exhaled breath condensate (EBC) samples using liquid chromatography–tandem mass spectrometry. AIDA is based on the alternate derivatization of the analyte(s) with reagents that are available in two pure isotopic forms, respectively “light” and “heavy”, by using light-derivatized standards for the quantification of the heavy-derivatized analytes, and vice versa. To this purpose, 2,4-dinitro-3,5,6-trideuterophenylhydrazine (d₃-DNPH) has been synthesized and used as “heavy” reagent in combination with commercial “light” DNPH. Using the AIDA method, any unknown concentration of the analyte in the matrix can be calculated without the need of a calibration curve. An external calibration method has been also investigated for comparative purpose. The stability of DNPH and d₃-DNPH derivatives was verified by excluding any exchange of hydrazones with each other. In the range of concentrations of biological interest, e.g., 2–40 nM for MDA and 0.5–10 nM for 4-HNE, the derivatization reactions of MDA and 4-HNE with DNPH and d₃-DNPH showed overlapping kinetics and comparable yields. The MS response of both DNPH and d₃-DNPH hydrazones was similar. The precision of AIDA, calculated as %RSD, was within 3.2–8% for MDA and 4.5–11% for 4-HNE. Accuracy was tested by analyzing a spiked EBC pool sample and acceptable results (accuracy within 98–108% for MDA and 93–114% for 4-HNE) were obtained by AIDA after subtraction of the blank, which was not negligible. The results of quantitative analysis of MDA and 4-HNE in EBC samples obtained by AIDA assay with four analyses per sample were in good agreement with those obtained by external calibration method on the same samples.     

Determination of isocyanate biomarkers in construction site workers.

4,4'-Methylenediphenyl diisocyanate (MDI) is the most important isocyanate in the manufacture of polyurethanes, dyes, pigments and adhesives. High concentrations of isocyanates are a potent respiratory irritant. Therefore, it is important to develop methods to monitor exposure to such compounds. We monitored biological samples from 40 non-exposed and 45 exposed construction site workers. 4,4'-Methylenedianiline (MDA) and N-acetyl-4,4'-MDA (AcMDA) were determined from untreated urine (U-MDA, U-AcMDA) and MDA was analysed from acid-treated urine (U-MDA-tot). Haemoglobin (Hb) adducts of MDA (Hb-MDA) were determined in all workers. The levels of biomarkers decreased in the following order: U-MDA-tot>U-AcMDA>U-MDA>Hb-MDA. The same order was found for the percentage of samples, which were found positive in exposed workers: 100%, 91%, 91%, 27%. The urine levels U-MDA-tot correlate with U-MDA, U-AcMDA and Hb-MDA with r=0.79, 0.86 and 0.39, respectively (Spearman rank order, p<0.01). U-AcMDA correlates with U-MDA and Hb-MDA with r=0.77 and 0.47, respectively (p<0.01). U-MDA correlates with Hb-MDA (r=0.38, p<0.05). The levels in the controls were significantly lower than in the exposed workers for all compounds (Mann-Whitney test, p<0.01). The median isocyanate-specific IgE-level was higher in the exposed workers, but the difference was statistically not significant. The change of the biomarker levels was compared in a group of workers (n=20), which were analysed prior to isocyanate exposure and after the exposure for approximately 4-7 months. All urine MDA metabolites and the Hb-adduct levels increased significantly (Wilcoxon sign test, p<0.01). Total IgE increased significantly after the exposure with isocyanate activity (p<0.01). With the present work it could be shown that outdoor workers are exposed to a similar extent as workers from a MDI factory.     

Fluorimetric screening assay for protein carbonyl evaluation in biological samples

Many assays are available for the detection of protein carbonyls (PCs). Currently, the measurement of PC groups after their derivatization with 2,4-dinitrophenol hydrazine (DNPH) is widely used for measuring protein oxidation in biological samples. However, this method includes several washing steps. In this context, we have developed a rapid, sensitive, and accurate fluorimetric method adapted to 96-well microplates for the convenient assessment of protein carbonyl level in biological samples. The method reported here is based on the reaction of carbonyl content in proteins with 7-hydrazino-4-nitrobenzo-2,1,3-oxadiazole (NBDH) to form highly fluorescent derivatives via hydrazone formation. PCs were determined using the DNPH and NBDH assays in fully reduced bovine serum albumin (BSA) and plasma and liver homogenates obtained from healthy control rats up the addition of various amounts of HOCl-oxidized BSA (OxBSA). Using the NBDH assay, PC concentrations as low as 0.2 nmol/mg were detected with precision as low as 5%. Matrix-assisted laser desorption/ionization time-of-flight (MALDI–TOF) mass spectroscopy was used to successfully identify the formation of the NBDH adducts after derivatization with standard oxidized peptides. Finally, the two methods were further used for PC determination in plasma and liver samples from diabetic and normal rats, showing that the NBDH assay can be reliably used in biological experiments.     

Proteomic approaches to identifying carbonylated proteins in brain tissue

Oxidative stress plays a critical role in the pathogenesis of a number of diseases. The carbonyl end products of protein oxidation are among the most commonly measured markers of oxidation in biological samples. Protein carbonyl functional groups may be derivatized with 2,4-dinitrophenylhydrazine (DNPH) to render a stable 2,4-dinitrophenylhydrazone-protein (DNP-protein) and the carbonyl contents of individual proteins then determined by two-dimensional electrophoresis followed by immunoblotting using specific anti-DNP antibodies. Unfortunately, derivatization of proteins with DNPH could affect their mass spectrometry (MS) identification. This problem can be overcome using nontreated samples for protein identification. Nevertheless, derivatization could also affect their mobility, which might be solved by performing the derivatization step after the initial electrophoresis. Here, we compare two-dimensional redox proteome maps of mouse cerebellum acquired by performing the DNPH derivatization step before or after electrophoresis and detect differences in protein patterns. When the same approach is used for protein detection and identification, both methods were found to be useful to identify carbonylated proteins. However, whereas pre-DNPH derivatized proteins were successfully analyzed, high background staining complicated the analysis when the DNPH reaction was performed after transblotting. Comparative data on protein identification using both methods are provided.     

Micronuclei in peripheral lymphocytes and exfoliated urothelial cells of workers exposed to 4,4′-methylenebis-(2-chloroaniline) (MOCA)

4,4′-Methylenebis-(2-chloroaniline) (MOCA) is used in the manufacture of polyurethane. The IARC classifies MOCA as a probable human carcinogen. Suggested changes to guidelines for health surveillance of MOCA-exposed workers in Australia include a reduction in acceptable levels of urinary MOCA to below 15 μmol/mol creatinine. Twelve male workers aged 24 and 42 years were recruited into this study from four work locations where MOCA is used. Exfoliated urothelial cells from prework urine samples on a midweek work day were assessed for micronucleus (MN) frequencies. Postwork urine samples were analysed for total MOCA. Blood samples collected on the same day were cultured for 96 h and cytochalasin-B-blocked cells were scored for MN. Eighteen male control subjects (23–59 years) provided corresponding urine and blood samples. Median urinary MOCA concentrations were 6.5 μmol/mol creatinine (range 0.4–48.6 μmol/mol creatinine) in postwork samples of MOCA-exposed workers. MOCA was not detected in urine of control workers. Mean MN frequencies were higher in urothelial cells and lymphocytes of MOCA workers (14.27±0.56 and 13.25±0.48 MN/1000 cells) than in controls (6.90±0.18 and 9.24±0.29 MN/1000 cells). The mean number of micronucleate cells was also higher in both tissues of exposed workers (9.69±0.32 and 8.54±0.14 MN cells/1000 cells) than in controls (5.18±0.11 and 5.93±0.13 MN cells/1000). There was no correlation between postwork urinary MOCA concentrations and MN frequencies in either tissue. This study suggests that exposures to MOCA in South Australia are similar to those of a decade ago and are at levels similar to those currently acceptable in Australia. These are associated with genotoxic effects in urothelial cells and peripheral blood lymphocytes. It may be prudent to reduce MOCA exposures in line with proposed guidance values.     

Determination of urinary zinc,chromium, and copper in steel production workers

The aim of our investigation was to determine the concentrations of Cu, Zn, and Cr in urine samples under routine clinical laboratory conditions. To asses the reliability of these methods, critical factors such as detection limit(s), calibration range(s), cost, accuracy, and precision were studied. Our method was employed for the quantitative determination of zinc, chromium, and copper in urine samples from steel production and quality control (QC) workers and healthy unexposed controls. After pretreatment with acids, the samples were digested via a microwave oven. Zinc was determined by flame absorption spectrophotometry (FAAS), whereas chromium and copper were determined by a graphite-furnace atomic absorption spectrophotometry (GFAAS). Our results indicate that urinary zinc, chromium, and copper levels of the exposed workers are significantly higher than those of the controls. The possibility that these metals are involved in the etiology of diseases is discussed and recommendations are made to improve workplace ventilation and industrial hygiene practices.     

A simple screening method using ion chromatography for the diagnosis of cerebral creatine deficiency syndromes

Cerebral creatine deficiency syndromes (CCDS) are caused by genetic defects in L-arginine:glycine amidinotransferase, guanidinoacetate methyltransferase or creatine transporter 1. CCDS are characterized by abnormal concentrations of urinary creatine (CR), guanidinoacetic acid (GA), or creatinine (CN). In this study, we describe a simple HPLC method to determine the concentrations of CR, GA, and CN using a weak-acid ion chromatography column with a UV detector without any derivatization. CR, GA, and CN were separated clearly with the retention times (mean ± SD, n = 3) of 5.54 ± 0.0035 min for CR, 6.41 ± 0.0079 min for GA, and 13.53 ± 0.046 min for CN. This new method should provide a simple screening test for the diagnosis of CCDS.     

Determination of isocyanate biomarkers in construction site workers

4,4′-Methylenediphenyl diisocyanate (MDI) is the most important isocyanate in the manufacture of polyurethanes, dyes, pigments and adhesives. High concentrations of isocyanates are a potent respiratory irritant. Therefore, it is important to develop methods to monitor exposure to such compounds. We monitored biological samples from 40 non-exposed and 45 exposed construction site workers. 4,4′-Methylenedianiline (MDA) and N-acetyl-4,4′-MDA (AcMDA) were determined from untreated urine (U-MDA, U-AcMDA) and MDA was analysed from acid-treated urine (U-MDA-tot). Haemoglobin (Hb) adducts of MDA (Hb-MDA) were determined in all workers. The levels of biomarkers decreased in the following order: U-MDA-tot>U-AcMDA>U-MDA>Hb-MDA. The same order was found for the percentage of samples, which were found positive in exposed workers: 100%, 91%, 91%, 27%. The urine levels U-MDA-tot correlate with U-MDA, U-AcMDA and Hb-MDA with r=0.79, 0.86 and 0.39, respectively (Spearman rank order, p<0.01). U-AcMDA correlates with U-MDA and Hb-MDA with r=0.77 and 0.47, respectively (p<0.01). U-MDA correlates with Hb-MDA (r=0.38, p<0.05). The levels in the controls were significantly lower than in the exposed workers for all compounds (Mann–Whitney test, p<0.01). The median isocyanate-specific IgE-level was higher in the exposed workers, but the difference was statistically not significant. The change of the biomarker levels was compared in a group of workers (n=20), which were analysed prior to isocyanate exposure and after the exposure for ～4–7 months. All urine MDA metabolites and the Hb-adduct levels increased significantly (Wilcoxon sign test, p<0.01). Total IgE increased significantly after the exposure with isocyanate activity (p<0.01). With the present work it could be shown that outdoor workers are exposed to a similar extent as workers from a MDI factory.     

Analysis of 3,5,6-trichloro-2-pyridinol in urine samples from the general population using gas chromatography–mass spectrometry after steam distillation and solid-phase extraction

We have developed a new method for the quantitative trace determination of 3,5,6-trichloro-2-pyridinol (TCPyr). TCPyr is a urinary metabolite specific to the organophosphorus pesticides chlorpyrifos and chlorpyrifos-methyl. After hydrolysis and separation of TCPyr from the urinary matrix using semi-automated steam distillation and solid-phase extraction on a new polystyrol–divinylbenzene copolymer (Isolute™ 101) the analyte was converted into its tert-butyldimethylsilyl derivative by N-tert-butyldimethylsilyl-N-methyltrifluoroacetamide (MTBSTFA). Separation and quantitative analysis were carried out by capillary gas chromatography and mass selective detection in selected ion monitoring mode. 2,6-Dibromophenol (DBP) was used as the internal standard. The detection limit was 0.05 μg/l; the limit of quantification was 0.1 μg/l urine. The relative standard deviation of the within-series imprecision was 4.2% at a concentration of 3.5 μg/l. The relative recovery was 104%. The new method was used to analyse the urine samples of 12 persons from the general population without known exposure to the above-mentioned pesticides. TCPyr concentrations between 0.27 and 6.6 μg/l urine were detected in all urine samples. This indicates that there is a baseline excretion of TCPyr in the general population. Four urine samples collected from workers who had applied chlorpyrifos were also analysed. In these samples TCPyr was found in concentrations from 4.7 to 7.9 μg/l.     

Determination of the 4-monohydroxy metabolites of perhexiline in human plasma, urine and liver microsomes by liquid chromatography

The use of perhexiline (PHX) is limited by hepatic and neurological toxicity associated with elevated concentrations in plasma that are the result of polymorphism of the cytochrome P450 2D6 isoform (CYP2D6). PHX is cleared by hepatic oxidation that produces three 4-monohydroxy metabolites: cis-OH-PHX, trans1-OH-PHX and trans2-OH-PHX. The current study describes an HPLC-fluorescent method utilising pre-column derivatization with dansyl chloride. Following derivatization, the metabolites were resolved on a C18 column with a gradient elution using a mobile phase composed of methanol and water. The method described is suitable for the quantification of the metabolites in human plasma and urine following clinical doses and for kinetic studies using human liver microsomes. The method demonstrates sufficient sensitivity, accuracy and precision between 5.0 and 0.01, 50.0 and 0.2 and 1.0 and 0.005 mg/l in human plasma, urine and liver microsomes, respectively, with intra-assay coefficients of variation and bias <15%, except at the lowest limit of quantification (<20%). The inter-assay coefficients of variation and bias were <15%. The application of this method to plasma and urine samples of five CYP2D6 extensive metaboliser (EM) patients at steady state with respect to PHX dosing determined that the mean (+/-S.D.) renal clearances of trans1-OH-PHX and cis-OH-PHX were 1.58+/-0.35 and 0.16+/-0.06l/h, respectively. The mean (+/-S.D.) dose recovered in urine as free and glucuronidated 4-monohydroxy PHX metabolites was 20.6+/-11.6%.     

Arsenic concentration in the urine of patients with Blackfoot disease and Bowen’s disease

Extensive epidemiological study implicates that high arsenic content in artesian well water is the causal factor responsible for Blackfoot disease. We determine the arsenic concentration in urine samples of patients with Blackfoot and Bowen’s diseases and examine whether there exists any discrepancy of urinary arsenic concentrations among patients and the normal population. The analyses were made by hydride atomic absorption spectrophotometry (AAS) and the analytical reliability of the method was checked with a standard urine sample (ORTHO Bi-Level Urine Metal Control). The results show that the mean urinary arsenic concentration in 100 healthy adults is 63.4±29.7 μg/L, and those means for 23 and 11 patients with Blackfoot disease and Bowen’s disease are 75.7±39.1 μg/L (P vs controls >0.05) and 201±58 μg/L (P vs controls <0.001), respectively. From the analytical results obtained, we cannot conclude that urinary arsenic is associated with Blackfoot disease, as was disclosed from the epidemiological studies. However, urinary arsenic concentrations are possibly very closely associated with Bowen’s disease.     

Application of optical isomer analysis by diastereomer derivatization GC/MS to determine the condition of patients with short bowel syndrome

To establish a method for separating the optical isomers of lactic acid, we modified the derivatization steps in our procedure for urinary mass-screening for inborn errors of metabolism. For chiral recognition, we chose O-trifluoroacetyl-(-)-menthylation derivatization instead of our previous method, trimethylsilyl derivatization, and the samples were then analyzed under GC/MS by capillary gas chromatography on a DB-5MS column. This method can be used to follow-up the condition of a patient with short bowel syndrome and to prevent onset and/or seizure. d-Lactic acid was also isolated from the urine of healthy controls as one of the main peaks in the chromatogram.     

Simple high-performance liquid chromatographic method to verify the direct barbituric acid assay for urinary cotinine

An isocratic HPLC method is described to determine urinary concentrations of nicotine and cotinine after derivatization with cyanogen chloride and barbituric acid. This method has been used to assess the reliability of the direct barbituric acid assay to determine smoking status. It is concluded that the direct barbituric acid assay is a very reliable indicator of smoking status, provided that urine blank samples are prepared to correct for background absorbance. If the direct barbituric acid assay is in disagreement with self-reported smoking status, this HPLC procedure is a useful method to resolve the discrepancy.     

Application of the standard addition approach for the quantification of urinary benzene

Urinary benzene is used as biomarker of exposure to evaluate the uptake of this solvent both in non-occupationally exposed population and in benzene-exposed workers. The quantitative determination of benzene in urine is carried out in a three steps procedure: urine collection, sample analysis by head space/solid phase microextraction/gas chromatography/mass spectrometry and analyte quantification. The adopted quantification method influences the initial step, hence the whole procedure. Two quantification approaches were compared as regards precision and accuracy: the calibration curves and the standard addition method. Even if calibration curves obtained by using urine samples from different subjects were always linear, their slopes and intercepts showed noteworthy variations, attributable to the influence of the biological matrix on benzene recovery. The standard addition method showed to be more suitable for compensating matrix effects, and a three-point standard addition protocol was used to quantify benzene in urine samples of 11 benzene-exposed workers (smokers and non-smokers). Urine from occupationally exposed workers was collected before and after work-shift. Besides urinary benzene, the applicability of the method was verified by measuring the urinary concentration of the S-phenylmercapturic acid, a specific benzene metabolite, generally adopted as biomarker in biological monitoring procedures. A similar trend of concentration levels of both analytes measured in urine samples collected before work-shift with respect to the after work-shift ones was found, showing the actual applicability of the standard addition method for biological monitoring purposes.