Cold-adaptation mechanism of mutant enzymes of 3-isopropylmalate dehydrogenase from Thermus thermophilus

Random mutagenesis of Thermus thermophilus 3-isopropylmalate dehydrogenase revealed that a substitution of Val126Met in a hinge region caused a marked increase in specific activity, particularly at low temperatures, although the site is far from the binding residues for 3-isopropylmalate and NAD. To understand the molecular mechanism, residue 126 was substituted with one of eight other residues, Gly, Ala, Ser, Thr, Glu, Leu, Ile or Phe. Circular dichroism analyses revealed a decreased thermal stability of the mutants (Delta T ((1/2))= 0-13 degrees C), indicating structural perturbations caused by steric conflict with surrounding residues having larger side chains. Kinetic parameters, k(cat) and K(m) values for isopropylmalate and NAD, were also affected by the mutation, but the resulting k(cat)/K(m) values were similar to that of the wild-type enzyme, suggesting that the change in the catalytic property is caused by the change in free-energy level of the Michaelis complex state relative to that of the initial state. The kinetic parameters and activation enthalpy change (Delta H (double dagger)) showed good correlation with the van der Waals volume of residue 126. These results suggested that the artificial cold adaptation (enhancement of k(cat) value at low temperatures) resulted from the destabilization of the ternary complex caused by the increase in the volume of the residue at position 126.     

Crystallization and preliminary X-ray data for 3-isopropylmalate dehydrogenase of Thermus thermophilus

The gene coding for 3-isopropylmalate dehydrogenase of Thermus thermophilus was cloned and expressed in Escherichia coli. The extracted enzyme was crystallized in a suitable size for X-ray crystallographic studies. The crystals have a space group of P3(1)21 or P3(2)21 with a = b = 78.6 A and c = 157.4 A.     

The effects of multiple ancestral residues on the Thermus thermophilus 3-isopropylmalate dehydrogenase

Previously, we showed that mutants of Thermus thermophilus 3-isopropylmalate dehydrogenase (IPMDH) each containing a residue (ancestral residue) that had been predicted to exist in a postulated common ancestor protein often have greater thermal stabilities than does the contemporary wild-type enzyme. In this study, the combined effects of multiple ancestral residues were analyzed. Two mutants, containing multiple mutations, Sup3mut (Val181Thr/Pro324Thr/Ala335Glu) and Sup4mut (Leu134Asn/Val181Thr/Pro324Thr/Ala335Glu) were constructed and show greater thermal stabilities than the wild-type and single-point mutant IPMDHs do. Most of the mutants have similar or improved catalytic efficiencies at 70 degrees C when compared with the wild-type IPMDH.     

Crystallization and preliminary X-ray studies of a Bacillus subtilis and Thermus thermophilus HB8 chimeric 3-isopropylmalate dehydrogenase and thermostable mutants of it.

A new type of chimeric 3-isopropylmalate dehydrogenase (2T2M6T) was produced by expressing the fused gene of Bacillus subtilis and Thermus thermophilus. The enzyme shows heat stability intermediate between those of the parents. The crystal of the enzyme belongs to the space group of P3(2)21, with cell dimensions of a = b = 78.9 A and c = 158.9 A. Two thermostable mutants of the chimeric enzyme were prepared by site-directed mutagenesis and then crystallized.     

Further stabilization of 3-isopropylmalate dehydrogenase of an extreme thermophile, Thermus thermophilus, by a suppressor mutation method.

We succeeded in further improvement of the stability of 3-isopropylmalate dehydrogenase (IPMDH) from an extreme thermophile, Thermus thermophilus, by a suppressor mutation method. We previously constructed a chimeric IPMDH consisting of portions of thermophile and mesophile enzymes. The chimeric enzyme is less thermostable than the thermophile enzyme. The gene encoding the chimeric enzyme was subjected to random mutagenesis and integrated into the genome of a leuB-deficient mutant of T. thermophilus. The transformants were screened at 76 degrees C in minimum medium, and three independent stabilized mutants were obtained. The leuB genes from these three mutants were cloned and analyzed. The sequence analyses revealed Ala-172-->Val substitution in all of the mutants. The thermal stability of the thermophile IPMDH was improved by introducing the amino acid substitution.     

Novel substrate specificity of designer 3-isopropylmalate dehydrogenase derived from Thermus thermophilus HB8

Redesigning of an enzyme for a new catalytic reaction and modified substrate specificity was exploited with 3-isopropylmalate dehydrogenase (IPMDH). Point-mutation on Gly-89, which is not in the catalytic site but near it, was done by changing it to Ala, Ser, Val, and Pro, and all the mutations changed the substrate specificity. The mutant enzymes showed higher catalytic efficiency (kcat/Km) than the native IPMDH when malate was used as a substrate instead of 3-isopropylmalate. More interestingly, an additional insertion of Gly between Gly-89 and Leu-90 significantly altered the substrate-specificity, although the overall catalytic activity was decreased. Particularly, this mutant turned out to efficiently accept D-lactic acid, which was not accepted as a substrate by wild-type IPMDH at all. These results demonstrate the opportunity for creating nove,enzymes by modification of amino acid residues that do not directly participate in catalysis, or by insertion of additional residues.     

Three-dimensional structure of phenylalanyl-transfer RNA synthetase from Thermus thermophilus HB8 at 0.6-nm resolution.

The three-dimensional structure of the heterodimeric alpha 2 beta 2 enzyme phenylalanyl-tRNA synthetase from Thermus thermophilus HB8 has been determined by X-ray crystallography, using the multiple-isomorphous-replacement method at 0.6 nm resolution. Trigonal crystals of space group P3(2)21 have cell dimensions a = b = 17.6 nm and c = 14.2 nm. Assuming one heterodimeric molecule/asymmetric unit, the ratio of unit cell volume/molecular mass was V = 0.00244 nm3/Da, which is in the middle of the range normally observed. However, after a rotation-function calculation and measurement of the density of the native crystals, we postulate the existence of only the alpha beta dimer in the asymmetric units. This implies 73% solvent content in the unit cell. Three heavy-atom derivatives [K2PtCl4, KAu(CN)2 and Hg(CH3COO)2] and the solvent-flattening procedure were used for electron-density-map calculations. This map confirmed our hypothesis and revealed a remarkably large space filled by solvent, with alpha beta dimer only in the asymmetric unit. The phenylalanyl-tRNA synthetase from T. thermophilus molecule has a 'quasi-linear' subunit organization. As can be concluded at this level of resolution, there is no contact between small alpha subunits in the functional heterodimer.     

Crystallization and preliminary X-ray studies of a Bacillus subtilis and Thermus thermophilus HB8 chimeric 3-isopropylmalate dehydrogenase

A chimeric gene was constructed by fusing the Bacillus subtilis and Thermus thermophilus genes coding for 3-isopropylmalate dehydrogenase, and expressed in Escherichia coli. The chimeric enzyme was crystallized in a size suitable for X-ray structure analysis. The crystal has a space group of P3(1)21 or P3(2)21, a = b = 77.1 A and c = 158.3 A, which is isomorphous with that of the native enzyme from T. thermophilus.     

Studies on interdomain interaction of 3-isopropylmalate dehydrogenase from an extreme thermophile, Thermus thermophilus, by constructing chimeric enzymes

In our previous study, we showed that a chimeric isopropylmalate dehydrogenase, 2T2M6T, between an extreme thermophile, Thermus thermophilus, and a mesophile, Bacillus subtilis, isopropylmalate dehydrogenases (the name roughly denotes the primary structure; the first 20% from the N-terminal is coded by the thermophile leuB gene, next 20% by mesophile, and the rest by the thermophile gene) denatured in two steps with a stable intermediate, suggesting that in the chimera some of the interdomain interaction was lost by amino acid substitutions in the "2M" part. To identify the residues involved in the interdomain interactions, the first and the second halves of the 2M part of the chimera were substituted with the corresponding sequence of the thermophile enzyme. Both chimeras, 3T1M6T and 2T1M7T, apparently showed one transition in the thermal denaturation without any stable intermediate state, suggesting that the cooperativity of the conformational stability was at least partly restored by the substitutions. The present study also suggested involvement of one or more basic residues in the unusual stability of the thermophile enzyme. Received: September 29, 1998 / Accepted: June 25, 1999     

High thermal stability of 3-isopropylmalate dehydrogenase from Thermus thermophilus resulting from low DeltaC(p) of unfolding.

To characterize the thermal stability of 3-isopropylmalate dehydrogenase (IPMDH) from an extreme thermophile, Thermus thermophilus, urea-induced unfolding of the enzyme and of its mesophilic counterpart from Escherichia coli was investigated at various temperatures. The unfolding curves were analyzed with a three-state model for E.coli IPMDH and with a two-state model for T.thermophilus IPMDH, to obtain the free energy change DeltaG degrees of each unfolding process. Other thermodynamic parameters, enthalpy change DeltaH, entropy change DeltaS and heat capacity change DeltaC(p), were derived from the temperature dependence of DeltaG degrees. The main feature of the thermophilic enzyme was its lower dependence of DeltaG degrees on temperature resulting from a low DeltaC(p). The thermophilic IPMDH had a significantly lower DeltaC(p), 1.73 kcal/mol.K, than that of E.coli IPMDH (20.7 kcal/mol.K). The low DeltaC(p) of T.thermophilus IPMDH could not be predicted from its change in solvent-accessible surface area DeltaASA. The results suggested that there is a large structural difference between the unfolded state of T.thermophilus and that of E.coli IPMDH. Another responsible factor for the higher thermal stability of T.thermophilus IPMDH was the increase in the most stable temperature T(s). The DeltaG degrees maximum of T.thermophilus IPMDH was much smaller than that of E.coli IPMDH. The present results clearly demonstrated that a higher melting temperature T(m) is not necessarily accompanied by a higher DeltaG degrees maximum.     

Selection of stabilized 3-isopropylmalate dehydrogenase of Saccharomyces cerevisiae using the host-vector system of an extreme thermophile, Thermus thermophilus

A leuB strain of Thermus thermophilus TTY1, was transformed with a plasmid vector that directed expression of 3-isopropylmalate dehydrogenase (IPMDH) of Saccharomyces cerevisiae encoded by the LEU2 gene. The original strain could not grow at 50 degrees C without leucine, probably because of the low stability of S. cerevisiae IPMDH. The mutants that could grow without leucine were selected at 50 degrees, 60 degrees, 62 degrees, 65 degrees, 67 degrees, and 70 degrees C, step by step. All the mutant strains except for one isolated at 50 degrees C accumulated mutations. Mutations were serially accumulated: Glu255Val, Asn43Tyr, Ala62Thr, Asn110Lys, and Alal 12Val, respectively, at each step. The analyses of residual activity after heat treatment and the denaturation profile as monitored by circular dichroism showed that thermal stability was increased with accumulation of the mutations. The kinetic parameters of most mutant enzymes were similar to those of the wild type. However, some mutant enzymes showed a reverse correlation between stability and activity: the enzymes with a large increase in thermal stability showed lower activity. Although the wild-type enzyme is unstable in the absence of glycerol, the stabilizing effect of glycerol was not observed for all the mutant enzymes containing the Glu255Val substitution, which is assumed to be located at the hydrophobic interface between two subunits.     

Three-dimensional structure of transketolase, a thiamine diphosphate dependent enzyme, at 2.5 A resolution.

The crystal structure of Saccharomyces cerevisiae transketolase, a thiamine diphosphate dependent enzyme, has been determined to 2.5 A resolution. The enzyme is a dimer with the active sites located at the interface between the two identical subunits. The cofactor, vitamin B1 derived thiamine diphosphate, is bound at the interface between the two subunits. The enzyme subunit is built up of three domains of the alpha/beta type. The diphosphate moiety of thiamine diphosphate is bound to the enzyme at the carboxyl end of the parallel beta-sheet of the N-terminal domain and interacts with the protein through a Ca2+ ion. The thiazolium ring interacts with residues from both subunits, whereas the pyrimidine ring is buried in a hydrophobic pocket of the enzyme, formed by the loops at the carboxyl end of the beta-sheet in the middle domain in the second subunit. The structure analysis identifies amino acids critical for cofactor binding and provides mechanistic insights into thiamine catalysis.     

Atomic level description of the domain closure in a dimeric enzyme: thermus thermophilus 3-isopropylmalate dehydrogenase

The domain closure associated with the catalytic cycle is described at an atomic level, based on pairwise comparison of the X-ray structures of homodimeric Thermus thermophilus isopropylmalate dehydrogenase (IPMDH), and on their detailed molecular graphical analysis. The structures of the apo-form without substrate and in complex with the divalent metal-ion to 1.8 ? resolution, in complexes with both Mn(2+) and 3-isopropylmalate (IPM), as well as with both Mn(2+) and NADH, were determined at resolutions ranging from 2.0 to 2.5 ?. Single crystal microspectrophotometric measurements demonstrated the presence of a functionally competent protein conformation in the crystal grown in the presence of Mn(2+) and IPM. Structural comparison of the various complexes clearly revealed the relative movement of the two domains within each subunit and allowed the identification of two hinges at the interdomain region: hinge 1 between αd and βF as well as hinge 2 between αh and βE. A detailed analysis of the atomic contacts of the conserved amino acid side-chains suggests a possible operational mechanism of these molecular hinges upon the action of the substrates. The interactions of the protein with Mn(2+) and IPM are mainly responsible for the domain closure: upon binding into the cleft of the interdomain region, the substrate IPM induces a relative movement of the secondary structural elements βE, βF, βG, αd and αh. A further special feature of the conformational change is the movement of the loop bearing the amino acid Tyr139 that precedes the interacting arm of the subunit. The tyrosyl ring rotates and moves by at least 5 ? upon IPM-binding. Thereby, new hydrophobic interactions are formed above the buried isopropyl-group of IPM. Domain closure is then completed only through subunit interactions: a loop of one subunit that is inserted into the interdomain cavity of the other subunit extends the area with the hydrophobic interactions, providing an example of the cooperativity between interdomain and intersubunit interactions.     

Analysis of the effect of accumulation of amino acid replacements on activity of 3-isopropylmalate dehydrogenase from Thermus thermophilus

A newly selected cold-adapted mutant 3-isopropylmalate dehydrogenase (IPMDH) from a random mutant library was a double mutant containing the mutations I11V and S92F that were found in cold-adapted mutant IPMDHs previously isolated. To elucidate the effect of each mutation on enzymatic activity, I11V and six multiple mutant IPMDHs were constructed and analyzed. All of the multiple mutant IPMDHs were found to be improved in catalytic activity at moderate temperatures by increasing the k(cat) with a simultaneous increase of K(m) for the coenzyme NAD(+). k(cat) was improved by a decrease in the activation enthalpy, DeltaH( not equal). The multiple mutants did not show large reduction in thermal stability, and one of them showed enhanced thermal stability. Mutation from I11 to V was revealed to have a stabilizing effect. Mutants showed increased thermal stability when the mutation I11V was combined. This indicates that it is possible to construct mutants with enhanced thermal stability by combining stabilizing mutation. No additivity was observed for the thermodynamic properties of catalytic reaction in the multiple mutant IPMDHs, implying that the structural changes induced by the mutations were interacting with each other. This indicates that careful and detailed tuning is required for enhancing activity in contrast to thermal stability.     

Crystal structure of thioltransferase at 2.2 A resolution.

We report here the first three-dimensional structure of a mammalian thioltransferase as determined by single crystal X-ray crystallography at 2.2 A resolution. The protein is known for its thiol-redox properties and dehydroascorbate reductase activity. Recombinant pig liver thioltransferase expressed in Escherichia coli was crystallized in its oxidized form by vapor diffusion technique. The structure was determined by multiple isomorphous replacement method using four heavy-atom derivatives. The protein folds into an alpha/beta structure with a four-stranded mixed beta-sheet in the core, flanked on either side by helices. The fold is similar to that found in other thiol-redox proteins, viz. E. coli thioredoxin and bacteriophage T4 glutaredoxin, and thus seems to be conserved in these functionally related proteins. The active site disulfide (Cys 22-Cys 25) is located on a protrusion on the molecular surface. Cys 22, which is known to have an abnormally low pKa of 3.8, is accessible from the exterior of the molecule. Pro 70, which is in close proximity to the disulfide bridge, assumes a conserved cis-peptide configuration. Mutational data available on the protein are in agreement with the three-dimensional structure.     

Preliminary characterization and crystal structure of a thermostable cytochrome P450 from Thermus thermophilus

The second structure of a thermophile cytochrome P450, CYP175A1 from the thermophilic bacterium Thermus thermophilus HB27, has been solved to 1.8-A resolution. The overall P450 structure remains conserved despite the low sequence identity between the various P450s. The CYP175A1 structure lacks the large aromatic network found in the only other thermostable P450, CYP119, thought to contribute to thermal stability. The primary difference between CYP175A1 and its mesophile counterparts is the investment of charged residues into salt-link networks at the expense of single charge-charge interactions. Additional factors involved in the thermal stability increase are a decrease in the overall size, especially shortening of loops and connecting regions, and a decrease in the number of labile residues such as Asn, Gln, and Cys.     

Adaptation of a thermophilic enzyme, 3-isopropylmalate dehydrogenase, to low temperatures

Random mutagenesis coupled with screening of the active enzyme at a low temperature was applied to isolate cold-adapted mutants of a thermophilic enzyme. Four mutant enzymes with enhanced specific activities (up to 4.1-fold at 40 degrees C) at a moderate temperature were isolated from randomly mutated Thermus thermophilus 3-isopropylmalate dehydrogenase. Kinetic analysis revealed two types of cold-adapted mutants, i.e. k(cat)-improved and K(m)-improved types. The k(cat)-improved mutants showed less temperature-dependent catalytic properties, resulting in improvement of k(cat) (up to 7.5-fold at 40 degrees C) at lower temperatures with increased K(m) values mainly for NAD. The K(m)-improved enzyme showed higher affinities toward the substrate and the coenzyme without significant change in k(cat) at the temperatures investigated (30-70 degrees C). In k(cat)-improved mutants, replacement of a residue was found near the binding pocket for the adenine portion of NAD. Two of the mutants retained thermal stability indistinguishable from the wild-type enzyme. Extreme thermal stability of the thermophilic enzyme is not necessarily decreased to improve the catalytic function at lower temperatures. The present strategy provides a powerful tool for obtaining active mutant enzymes at lower temperatures. The results also indicate that it is possible to obtain cold-adapted mutant enzymes with high thermal stability.     

Crystal structure of novel NADP-dependent 3-hydroxyisobutyrate dehydrogenase from Thermus thermophilus HB8

3-Hydroxyisobutyrate, a central metabolite in the valine catabolic pathway, is reversibly oxidized to methylmalonate semialdehyde by a specific dehydrogenase belonging to the 3-hydroxyacid dehydrogenase family. To gain insight into the function of this enzyme at the atomic level, we have determined the first crystal structures of the 3-hydroxyisobutyrate dehydrogenase from Thermus thermophilus HB8: holo enzyme and sulfate ion complex. The crystal structures reveal a unique tetrameric oligomerization and a bound cofactor NADP+. This bacterial enzyme may adopt a novel cofactor-dependence on NADP, whereas NAD is preferred in eukaryotic enzymes. The protomer folds into two distinct domains with open/closed interdomain conformations. The cofactor NADP+ with syn nicotinamide and the sulfate ion are bound to distinct sites located at the interdomain cleft of the protomer through an induced-fit domain closure upon cofactor binding. From the structural comparison with the crystal structure of 6-phosphogluconate dehydrogenase, another member of the 3-hydroxyacid dehydrogenase family, it is suggested that the observed sulfate ion and the substrate 3-hydroxyisobutyrate share the same binding pocket. The observed oligomeric state might be important for the catalytic function through forming the active site involving two adjacent subunits, which seems to be conserved in the 3-hydroxyacid dehydrogenases. A kinetic study confirms that this enzyme has strict substrate specificity for 3-hydroxyisobutyrate and serine, but it cannot distinguish the chirality of the substrates. Lys165 is likely the catalytic residue of the enzyme.     

The CuA domain of Thermus thermophilus ba3-type cytochrome c oxidase at 1.6 A resolution.

The structure of the CuA-containing, extracellular domain of Thermus thermophilus ba3-type cytochrome c oxidase has been determined to 1.6 A resolution using multiple X-ray wavelength anomalous dispersion (MAD). The Cu2S2 cluster forms a planar rhombus with a copper-copper distance of 2.51 +/- 0.03 A. X-ray absorption fine-structure (EXAFS) studies show that this distance is unchanged by crystallization. The CuA center is asymmetrical; one copper is tetrahedrally coordinated to two bridging cysteine thiolates, one histidine nitrogen and one methionine sulfur, while the other is trigonally coordinated by the two cysteine thiolates and a histidine nitrogen. Combined sequence-structure alignment of amino acid sequences reveals conserved interactions between cytochrome c oxidase subunits I and II.