The preparation of CdTe nanoparticles and CdTe nanoparticle-labelled microspheres for biological applications.

Different sizes of CdTe semiconductor nanoparticles were prepared in aqueous solution. These nanoparticles exhibit narrow fluorescence with full width at half-maximum (FWHM) of 35-45 nm that spans the visible spectrum, and they also have high PL quantum yield with high resistance to photodegradation. In addition, CdTe quantum dot (QD)-labelled microspheres, comprising polystyrene (PS) cores and CdTe/polyelectrolyte (PE) shells, were also prepared by the layer-by-layer technique in this paper. The optical properties of the CdTe nanoparticles and CdTe-labelled microspheres were investigated by UV-Visible absorption and luminescence spectroscopy, and fluorescence microscopy was employed for microscopic identification behaviour of the luminescent microspheres.     

CdTe/ZnS quantum dots as fluorescent probes for ammonium determination

Novel CdTe/ZnS quantum dot (QD) probes based on the quenching effect were proposed for the simple, rapid, and specific determination of ammonium in aqueous solutions. The QDs were modified using 3‐mercaptopropionic acid, and the fluorescence responses of the CdTe/ZnS QD probes to ammonium were detected through regularity quenching. The quenching levels of the CdTe/ZnS QDs and ammonium concentration showed a good linear relationship between 4.0 × 10^?6 and 5.0 × 10^?4 mol/L; the detection limit was 3.0 × 10^?7 mol/L. Ammonium contents in synthetic explosion soil samples were measured to determine the practical applications of the QD probes and a probable quenching mechanism was described. Copyright © 2015 John Wiley & Sons, Ltd.     

微流控芯片在中枢神经系统疾病中的应用与展望

近年来,随着微流体技术和生物微电子机械系统技术的不断发展,人类中枢神经系统(CNS)的微流体平台及相关疾病的体外模型逐渐得到了广泛的研究。微流体平台可以更好地模拟体内环境,同时能够控制结构、微环境和外来刺激。文中总结了微流控芯片在CNS的基本技术和CNS疾病中的应用。此外,文中对微流控芯片在CNS中的研究进行了展望,强调了通过跨学科的共同努力能够实现更高程度的仿生学挑战。     

Development of acetylcholinesterase biosensor based on CdTe quantum dots/gold nanoparticles modified chitosan microspheres interface

In this paper, a novel acetylcholinesterase (AChE) biosensor was constructed by modifying glassy carbon electrode with CdTe quantum dots (QDs) and excellent conductive gold nanoparticles (GNPs) though chitosan microspheres to immobilize AChE. Since GNPs have shown widespread use particularly for constructing electrochemical biosensors through their high electron-transfer ability, the combined AChE exhibited high affinity to its substrate and thus a sensitive, fast and cheap method for determination of monocrotophos. The combination of CdTe QDs and GNPs promoted electron transfer and catalyzed the electro-oxidation of thiocholine, thus amplifying the detection sensitivity. This novel biosensing platform based on CdTe QDs-GNPs composite responded even more sensitively than that on CdTe QDs or GNPs alone because of the presence of synergistic effects in CdTe-GNPs film. The inhibition of monocrotophos was proportional to its concentration in two ranges, from 1 to 1000ngmL(-1) and from 2 to 15mugmL(-1), with a detection limit of 0.3ngmL(-1). The proposed biosensor showed good precision and reproducibility, acceptable stability and accuracy in garlic samples analysis.     

微流控芯片监测绿色荧光蛋白在枯草芽孢杆菌中的表达

目前主要使用激光共聚焦扫描显微镜观察绿色荧光蛋白的表达,但需要昂贵的仪器并耗费大量时间。本研究开发了一种新型激光诱导的微流芯片检测系统来监测绿色荧光蛋白在枯草芽孢杆菌中的表达。该系统主要由激光装置、光路系统、微流控芯片、光电倍增管和计算机处理系统等5部分组成。对该系统的测试结果显示,随着诱导强度的增强监测信号峰也随之增强,并且与激光共聚焦显微镜观察的结果一致。利用该芯片系统能够快速准确地筛选和鉴定用绿色荧光蛋白作为标记的细胞克隆,可以替代PCR鉴定方法。但该系统仅仅能够监测表达强度,不能够满足蛋白定位等高水平研究,因此,该系统适合应用于环境的微生物监测、药物筛选和其他无需观察蛋白定位等研究。     

A highly selective and simple fluorescent sensor for mercury (II) ion detection based on cysteamine‐capped CdTe quantum dots synthesized by the reflux method

Cysteamine (CA)‐capped CdTe quantum dots (QDs) (CA–CdTe QDs) were prepared by the reflux method and utilized as an efficient nano‐sized fluorescent sensor to detect mercury (II) ions (Hg²⁺). Under optimum conditions, the fluorescence quenching effect of CA–CdTe QDs was linear at Hg²⁺ concentrations in the range of 6.0–450 nmol/L. The detection limit was calculated to be 4.0 nmol/L according to the 3σ IUPAC criteria. The influence of 10‐fold Pb²⁺, Cu²⁺ and Ag⁺ on the determination of Hg²⁺ was < 7% (superior to other reports based on crude QDs). Furthermore, the detection sensitivity and selectivity were much improved relative to a sensor based on the CA–CdTe QDs probe, which was prepared using a one‐pot synthetic method. This CA–CdTe QDs sensor system represents a new feasibility to improve the detection performance of a QDs sensor by changing the synthesis method. Copyright © 2014 John Wiley & Sons, Ltd.     

Determination of ethanol using permanganate–CdS quantum dot chemiluminescence system

A novel and highly sensitive chemiluminescence (CL) method for the determination of ethanol was developed based on the CdS quantum dots (QDs)–permanganate system. It was found that KMnO₄ could directly oxidize CdS QDs in acidic media resulting in relatively high CL emission. A possible mechanism was proposed for this reaction based on UV/Vis absorption, fluorescence and the generated CL emission spectra. However, it was observed that ethanol had a remarkable inhibition effect on this system. This effect was exploited in the determination of ethanol within the concentration range 12–300 µg/L, with detection at 4.3 µg/L. In order to evaluate the capability of presented method, it was satisfactorily utilized in the determination of alcohol in real samples. Copyright © 2014 John Wiley & Sons, Ltd.     

三种细胞共培养微流控芯片的设计和制作

设计一种具有“微坝”和“微缝”结构的微流控芯片,能够物理隔离不同细胞,而且培养基中小分子营养物质可以自由流通。实验结果表明在芯片上可以共培养人肺腺癌细胞(A549)、人胚肺成纤维细胞(HLF-1)和人内皮细胞(HUVECs)三种细胞,在72 h培养后三种细胞生长状态良好,具有细胞图形化的特点和功能,为下一步开展多种细胞相互作用等相关研究提供重要的技术平台。     

基于环介导等温扩增技术的微流控芯片在病原菌检测方面的研究进展

环介导等温扩增(LAMP)技术是一种新兴的核酸恒温扩增技术,与微流控芯片技术相结合,可实现对病原菌的快速检测,具有特异性强、灵敏度高、操作简单等优点。本文根据不同终产物的检测方法对目前检测病原菌的相关微流控LAMP芯片进行了分类与介绍,并对技术的改进和存在的问题进行了分析,以期为后续的相关研究提供参考。     

Chemiluminescence determination of moxifloxacin in pharmaceutical and biological samples based on its enhancing effect of the luminol–ferricyanide system using a microfluidic chip

A sensitive determination of a synthetic fluoroquinolone antibacterial agent, moxifloxacin (MOX), by an enhanced chemiluminescence (CL) method using a microfluidic chip is described. The microfluidic chip was fabricated by a soft‐lithographic procedure using polydimethyl siloxane (PDMS). The fabricated PDMS microfluidic chip had three‐inlet microchannels for introducing the sample, chemiluminescent reagent and oxidant, and a 500 µm wide, 250 µm deep and 82 mm long microchannel. An enhanced CL system, luminol–ferricyanide, was adopted to analyze the MOX concentration in a sample solution. CL light was emitted continuously after mixing luminol and ferricyanide in the presence of MOX on the PDMS microfluidic chip. The amount of MOX in the luminol–ferricyanide system influenced the intensity of the CL light. The linear range of MOX concentration was 0.14–55.0 ng/mL with a correlation coefficient of 0.9992. The limit of detection (LOD) and limit of quantification (LOQ) were 0.06 and 0.2 ng/mL respectively. The presented method afforded good reproducibility, with a relative standard deviation (RSD) of 1.05% for 10 ng/mL of MOX, and has been successfully applied for the determination of MOX in pharmaceutical and biological samples. Copyright © 2013 John Wiley & Sons, Ltd.     

一种基于微芯片快速生成双层乳化液滴的方法

体外区室化(In vitro compartmentalization,IVC)是通过制备微液滴反应小室包裹单个基因(包含表达体系)或细胞进行反应和培养,从而建立表现型与基因型的偶联,并借助流式细胞仪(Fluorescence-activatedcell sorting,FACS)对液滴进行超高通量检测和筛选,进而快速获得目标基因或细胞的一种方法。IVC-FACS筛选方法已被广泛应用于蛋白质工程、酶工程等定向进化研究。但早期利用机械分散法生成的微液滴大小均一性难以控制,严重影响液滴的定量检测,降低了筛选的效率和准确性。随着微流控芯片制备技术的快速发展,在芯片内快速生成微液滴的技术也愈加成熟。本研究首先利用W/O (Water-in-oil)单层液滴生成芯片高速制备单分散的W1/O液滴,再将W1/O液滴重注入W/O/W (Water-in-oil-in-water)双层乳化液滴生成芯片制备均一的W1/O/W2双层乳化液滴。通过对油、水相流速与比值的优化,可以生成直径在15.4–23.2μm的单乳化微液滴,液滴可在培养数天内保持稳定。将单乳化液滴重注入双层乳化液滴芯片,通过调整油相流速,可以获得生成速度在1 000个液滴/s、直径在30–100μm的双层乳化液滴。利用双层乳化液滴包埋的大肠杆菌细胞能正常进行培养和目标蛋白的诱导表达,为后续建立基于液滴和流式细胞仪的菌株高通量筛选方法奠定基础。     

Mortalin imaging in normal and cancer cells with quantum dot immuno-conjugates

Quantum dots are the nanoparticles that are recently emerging as an alternative to organic fluorescence probes in cell biology and biomedicine, and have several predictive advantages. These include their ⑴broad absorption spectra allowing visualization with single light source, ⑵exceptional photo-stability allowing long term studies and ⑶narrow and symmetrical emission spectrum that is controlled by their size and material composition. These unique properties allow simultaneous excitation of different size of quantum dots with a single excitation light source, their simultaneous resolution and visualization as different colors. At present there are only a few studies that have tested quantum dots in cellular imaging. We describe here the use of quantum dots in mortalin imaging of normal and cancer cells. Mortalin staining pattern with quantum dots in both normal and cancer cells mimicked those obtained with organic florescence probes and were considerably stable.     

Photostability of quantum dot micelles under ultraviolet irradiation

Phospholipid quantum dot micelles are useful for bio‐applications because of their amphiphilicity and exceptional biocompatibilities. We investigated the uptake of phospholipid [polyethylene glycol (PEG), biotin, and folic acid terminated] modified CdSe/ZnS quantum dot micelles by cancer cells and its photostability under ultrviolet light in the C spectrum (UV‐C) (254 nm) or UV‐A (365 nm) light irradiation. The stability of micelles to the exposure of UV‐C and UV‐A light was assessed. Biotin‐modified quantum dot micelles give photoluminescence enhancement under UV‐C light irradiation. Folate modified micelle under UV‐C and UV‐A results show considerable photoluminescence enhancement. Photoluminescence lifetime measurements showed 7.04, 8.11 and 11.42 ns for PEG, folate, and biotin terminated phospholipid micelles, respectively. Folate and biotin‐modified quantum dot micelles showed excellent uptake by HeLa cells under fluorescence confocal microscopy. Phospholipid CdSe/ZnS quantum dot micelles can be potentially used for diagnosis and treatment of cancer in the future.     

The determination of nitrite by a graphene quantum dot fluorescence quenching method without sample pretreatment

A method for quantitative analysis of nitrite was achieved based on fluorescence quenching of graphene quantum dots. To obtain reliable results, the effects of pH, temperature and reaction time on this fluorescence quenching system were studied. Under optimized conditions, decrease in fluorescence intensity of graphene quantum dots (F₀/F) showed a good linear relationship with nitrite concentration between 0.007692–0.38406 mmol/L and 0.03623–0.13043 μmol/L; the limits of detection were 9.8 μmol/L and 5.4 nmol/L, respectively. Variable temperature experiments, UV absorption spectra and thermodynamic calculations were used to determine the quenching mechanism, and indicated that it was an exothermic, spontaneous dynamic quenching process. This method was used to analyse urine samples, and showed that it could be applied to analyse biological samples.     

Metal ion-mediated carbon dot nanoprobe for fluorescent turn-on sensing of N-acetyl-l-cysteine

In this work, carbon dots (CDs) was easily synthesized from aspartic acid through a pyrolysis method. Based on their favourable fluorescence properties, CDs were utilized to design a metal ion-mediated fluorescent probe for N-acetyl-l -cysteine (NAC) detection. The fluorescence intensity of CDs was firstly quenched by manganese ions (Mn²⁺) through static quenching effect and subsequently restored by NAC via the combination with Mn²⁺ due to the coordination effect. Therefore, the fluorescent turn-on sensing of NAC was actuated based on the fluorescence quenching stimulated by Mn²⁺ and recovery induced by coordination. The fluorescence recovery efficiencies showed a proportional range to the concentration of NAC in the range 0.04–5 mmol L⁻¹ and the detection limit was 0.03 mmol L⁻¹. Furthermore, this metal ion-mediated fluorescent nanoprobe was applied to human urine sample detection and the standard recovery rates were located in the range 97.62–102.34%. This was the first time that Mn²⁺ was used to construct a fluorescent nanoprobe for NAC. Compared with other heavy metal ions, Mn²⁺ with good biosecurity prevented the risk of application, which made the nanoprobe green and biopractical. The facile synthesis of CDs and novel metal ion-mediated sensing mode made it a promising method for pharmaceutical analysis.     

凝胶电泳微流控芯片提取外泌体及对人血浆外泌体中miRNA-21的测定

为了开发一种用于人体血浆中外泌体的高效快速提取和分离的新型微流控芯片,文中收集健康人体外周血液样本,自主设计并制备基于纳米多孔薄膜和琼脂糖凝胶电泳的微流芯片.提取的外泌体使用透射电镜、Nanosight和Western blotting等技术进行表征,鉴定并分析其形态、浓度和粒径分布.同时将超速离心法和微流芯片所提取的...     

Synthesis and utilization of E. coli‐encapsulated PEG‐based microdroplet using a microfluidic chip for biological application

We report herein an effective strategy for encapsulating Escherichia coli in polyethylene glycol diacrylate (PEGDA) microdroplets using a microfluidic device and chemical polymerization. PEGDA was employed as a reactant due to the biocompatibility, high porosity, and hydrophilic property. The uniform size and shape of microdroplets are obtained in a single‐step process using microfluidic device. The size of microdroplets can be controlled through the changing continuous flow rate. The combination of microdroplet generation and chemical polymerization techniques provide unique environment to produce non‐toxic ways of fabricating microorganism‐encapsulated hydrogel microbeads. Due to these unique properties of micro‐sized hydrogel microbeads, the encapsulated E. coli can maintain viability inside of microbeads and green fluorescent protein (GFP) and red fluorescent protein (RFP) genes are efficiently expressed inside of microbeads after isopropyl‐β‐D ‐thiogalactopyranoside induction, suggesting that there is no low‐molecular weight substrate transfer limitation inside of microbeads. Furthermore, non‐toxic, gentle, and outstanding biocompatibility of microbeads, the encapsulated E. coli can be used in various applications including biotransformation, biosensing, bioremediation, and engineering of artificial cells. Biotechnol. Bioeng. 2010;107:747–751. © 2010 Wiley Periodicals, Inc.     

The synthesis and modification of highly fluorescent carbon quantum dots for reversible detection of water‐soluble phosphonate‐1‐hydroxyethane‐1,1‐diphosphonic acid by fluorescence spectroscopy

Photoluminescent (PL) carbon quantum dots (CQDs) were prepared successfully using a facile and green procedure. They exhibited striking blue fluorescence and excellent optical properties, with a quantum yield as high as 61.44%. Due to the fluorescence quenching effect and the stronger complexing ability of the phosphoric acid group of 1‐hydroxyethane‐1,1‐diphosphonic acid (HEDP) to Fe³⁺ , CQDs doped with Fe³⁺ were adequately constructed as an efficient and sensitive fluorescent probe for HEDP‐specific sensing. The proposed fluorescent probe had a sensitive and rapid response in the range 5–70 μ M. Furthermore, quantitative molecular surface (QMS) analysis based on the Multiwfn program was applied to explore the complexation mode of HEDP and metal ions. The distribution of electrostatic potential (ESP), average local ionization energy (ALIE), the minimum value points and the position of the lone pair electrons on the surface of molecular van der Waals were further determined. More strikingly, this experiment achieved the quantitative detection of water‐soluble phosphonate‐HEDP, for the first time using fluorescence spectrometry. It has been proved to be an effective and intuitive sensing method for the detection of HEDP in real samples.     

Enhanced chemiluminescence of the fluorescein–KIO4 system by CdTe quantum dots for determination of catechol

In this paper, a novel chemiluminescence (CL) system was introduced based on the use of CdTe quantum dots (QDs) with the mixture solutions of fluorescein and potassium periodate (KIO₄) in alkaline medium. The CL signal of an ultra‐weak system was strongly enhanced in the presence of QDs. The application of CdTe QDs–fluorescein–KIO₄ system is reported for the first time. It was found that catechol had a diminishing effect on the CL reaction. Under optimal experimental conditions, CL intensity decreased linearly in a 1 to 100 μM catechol concentration range, with a 0.18 μM detection limit. A possible reaction mechanism was proposed according to the results of kinetic analyses, CL spectra, ultraviolet–visible and fluorescence spectra. The results pointed to an efficient energy transfer between the CL energy donor CdTe QDs and acceptor fluorescein. Finally, the CL method was successfully applied to the determination of catechol in environmental water samples.     

荧光量子点的生物合成方法研究进展

作为一种新型纳米材料,荧光量子点的合成方法大致可分为物理法、化学法和生物合成法。生物合成方法因其绿色、环保、产物生物相容性好而备受关注。本文通过对国内外荧光量子点生物合成方法的资料研究,以细菌、真菌、其它生物机体、生物辅助等角度对生物合成荧光量子点的方法进行归纳总结,并着重对基于微生物的合成方法进行了分类。在探讨微生物合成机理的基础上,对生物合成法的未来方向提出展望。