Antimicrobial activity of core-sheath surgical sutures modified with poly-3-hydroxybutyrate

To impart antimicrobial activity to surgical sutures, weaved polyester fibers are coated with poly-3-hydroxybutyrate (PHB), containing the antimicrobial agent furazolidone (FZ). The prolonged FZ effect (7-14 days) is achieved by two-step application of a sheath, constituting 10% of the suture weight and containing 2-6% FZ. The sheath structure and antimicrobial activity of sutures can be modified by the introduction of other biocompatible and biodegradable polymers.     

Anaerobic degradation of poly-3-hydroxybutyrate and poly-3-hydroxybutyrate-co-3-hydroxyvalerate

The anaerobic degradation of the polyesterspoly-3-hydroxybutyrate (PHB) andpoly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV) wasinvestigated with special regard to intermediateproducts, kinetics, and yields. During the degradationof PHBV acetate, propionate, n-butyrate, andn-valerate were detected. Additionally,3-hydroxybutyrate and 3-hydroxyvalerate and fourdimeric esters of these two molecules were identifiedby GC-MS measurements. Three different test systemsfor the anaerobic degradation of polyesters werestudied. It was not possible to get reproducibleresults by means of the Anaerobic Sturm-test, a simplesystem based on carbon dioxide measurement. Secondly,a system based on the GC measurement of accumulatedorganic acids was investigated. A degradation of 90%in two days was calculated by a carbon balance. Bestresults were reached with the third test system basedon the measurement of methane with a gas meter. Adegradation of 99% was observed within 30 days.     

Anaerobic degradation of poly-3-hydroxybutyrate and poly-3-hydroxybutyrate-co-3-hydroxyvalerate

The anaerobic degradation of the polyesters poly-3-hydroxybutyrate (PHB) and poly-3-hydroxybutyrate-co-3-hydroxyvalerate (PHBV) was investigated with special regard to intermediate products, kinetics, and yields. During the degradation of PHBV acetate, propionate, n-butyrate, and n-valerate were detected. Additionally, 3-hydroxybutyrate and 3-hydroxyvalerate and four dimeric esters of these two molecules were identified by GC-MS measurements. Three different test systems for the anaerobic degradation of polyesters were studied. It was not possible to get reproducible results by means of the Anaerobic Sturm-test, a simple system based on carbon dioxide measurement. Secondly, a system based on the GC measurement of accumulated organic acids was investigated. A degradation of 90% in two days was calculated by a carbon balance. Best results were reached with the third test system based on the measurement of methane with a gas meter. A degradation of 99% was observed within 30 days.     

Biosynthesis of poly-3-hydroxybutyrate by Sphaerotilus natans

A sheathed bacterium Sphaerotilus natans could not survive at 4°C for 2 months, and mutants that exhibited different colony phenotypes were obtained only by repeating the short period of storage at 4 °C. The ability of these mutants and the parent strain to produce poly-3-hydroxybutyrate (PHB) was compared in batch cultures. The parent strain accumulated 30% (w/w) PHB, while one of the mutants defective in sheath formation, designated as T2, accumulated over 50% PHB. Because T2 did not require strict air or nitrogen limitation for polymer accumulation, its production was growth-associated, allowing one-stage fermentation. In a pH-controlled fermentation using a jar fermentor, 10 g/l glucose was converted into 2.0 g/l PHB in 24 h.     

Extraction of poly-3-hydroxybutyrate using chlorinated solvents

Summary Recovery of poly-3-hydroxybutyrate (PHB) in three chlorinated solvents with or without acetone pretreatment and degradation of extracted PHB (99% pure) in hot chloroform were studied. When lyophilized Alcaligenes eutrophus biomass was used, the best results were obtained with acetone pretreatment and solvent reflux for 15 min in methylene chloride or chloroform. Recovered PHB had a 95% purity and molecular weights (M_w) of 1,050,000 and 930,000 g/mol respectively. Further heating resulted in a serious M_w, loss at reflux temperatures. Degradation of extracted PHB at 110°C in chloroform was due to random and chain-end scission, the former being predominant.     

Occurrence of poly-3-hydroxybutyrate inAzospirillum sp.

Azospirillum strains isolated from the roots and rhizosphere of some plants growing in West Bengal were subjected to qualitative and quantitative evaluation for poly-3-hydroxybutyrate (PHB) production. Out of the total 49 isolates, 13 (26%) were confirmed as PHB producers according to staining and chemical assay methods. The majority of these strains belonged toAzospirillum brasilense butA. amazonense andA. lipoferum were also present. When grown in the presence of NH₄Cl in the medium, the PHB content of the strains ranged from 1 to 14% of cell dry mass. The identity of the PHB extracted fromAzospirillum strain 24P-N-72 was confirmed by the characteristic UV and IR absorption peaks at 235 nm and 1730 cm⁻¹, respectively.     

Growth-associated production of poly-3-hydroxybutyrate byBacillus mycoides

Bacillus mycoides strain RIJ B-017, a growth-associated poly-3-hydroxybutyrate (PHB) producer was grown on sucrose-containing media. PHB accumulated in cells up to 72% of dry cell mass. The overall maximum value of PHB yield (Y _p/s) and productivities (Q _p andq _p) 250 mg_p/g_s, 120 mg_p L⁻¹ h⁻¹ and 30 mg_p g_x ⁻¹ h⁻¹, respectively, were obtained at 15 g/L sucrose. Differential scanning calorimeter heating curve showed two peaks, one at 95.9 °C and another at 165.4°C with a shoulder around 154.6 °C. The viscosity-average molar mass in chloroform at 27°C was 505 kDa. The carbon content of PHB was 55.4% of the mass.     

Producing poly-3-hydroxybutyrate with a high molecular mass from methane

Poly-3-hydroxybutyrate (PHB) and other polyesters can be produced by various species of bacteria. Of the possible carbon sources, methane could provide a suitable substrate for the production of PHB. Methane is cheap and plentiful - not only as natural gas, but also as biogas. The methanotrophic strain Methylocystis sp. GB 25 DSMZ 7674 is able to accumulate PHB in a brief non-sterile process. The studies were carried out using a 7-l and a 70-l pressure bioreactor. Cultivation was performed in two stages: a continuous growth phase (dilution rate 0.17 h(-1)) and a PHB accumulation phase under deficiency conditions of an essential nutrient (ammonium, phosphorus or magnesium) in batch culture. The PHB content of biomass was as high as 51%; efficiency was highest during the first 5 h of the product formation process. The maximum PHB yield relative to the methane consumed was estimated to be 0.55 g g(-1). The PHB produced is of very high quality, having a high molecular mass of up to 2.5x10(6) Da.     

Direct electrochemistry and electrocatalysis of hemoglobin in poly-3-hydroxybutyrate membrane

Hemoglobin (Hb) can take direct electron-transfer reactions after being entrapped in poly-3-hydroxybutyrate (PHB) film. A pair of well-defined, quasi-reversible cyclic voltammetric peaks is thus obtained at an Hb-PHB modified pyrolytic graphite electrode. The anodic and cathodic peaks are located at -224 and -284 mV for a pH 5.0 acetate buffer solution. Meanwhile, the peroxidase activity of the protein in the membrane has been greatly enhanced, with the apparent Michaelis-Menten constant calculated to be 1076 microM. According to the direct electron transfer property and enhanced peroxidase activity of Hb in the membrane, a Hb-PHB based hydrogen peroxide biosensor is prepared, with a linear range 6.0 x 10(-7) to 8.0 x 10(-4) M. The pathway of reductive dehalogenation of trichloroacetic acid is also discussed in detail. The highly reduced form of Hb produced in PHB film can be used to dechlorinate di- and monochloroacetic acid. The catalytic ability of Hb toward the reduction of nitric oxide has been investigated as well. Due to its biodegradability, low cost, chemical inertness, and especially its biocompatibility and non-toxicity, PHB would be a desirable film in the sensor field.     

Antimicrobial characteristics and biocompatibility of the surgical sutures coated with biosynthesized silver nanoparticles

Surgical sutures play important role during the wound healing of the surgical sites which are known to be sensitive to microbial infections. Silver nanoparticles (AgNPs) have been recently used as promising agents against multiple-drug resistant microorganisms. This study was designed to coat the sutures with silver nanoparticles obtained via a green synthesis approach. Microbial-mediated biological synthesis of AgNPs were carried out ecofriendly using Streptomyces sp. AU2 cell-free extract and deposited on silk sutures through an in situ process. Sutures coated with biosyntehsized AgNP (bio-AgNP coated sutures) were characterized using Scanning Electron Microscopy (SEM) and elemantal analysis were carried out using Energy Dispersive X-ray Spectroscopy (EDS). The silver amount released by the bio-AgNP coated sutures was calculated by Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) throughout a degradation process. Antimicrobial potential of the bio-AgNP coated sutures was determined against common pathogenic microorganisms Candida albicans, Escherichia coli and Staphylococcus aureus. To determine the biocompatibility/cytotoxicty of the bio-AgNP coated sutures, the MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium) assay was used through an indirect test method; that the elutions obtained by the extraction of the sutures at 1, 4, 8 and 10. days and were placed in contact with 3T3 fibroblast cell culture. To best of our knowledge, this is the first report about coating of the nonabsorbable silk sutures with silver nanoparticles biosynthesized using a microbial extract.     

Microbial production of 4-hydroxybutyrate,poly-4-hydroxybutyrate,and poly(3-hydroxybutyrate-co-4-hydroxybutyrate) by recombinant microorganisms

4-Hydroxybutyrate (4HB) was produced by Aeromonas hydrophila 4AK4, Escherichia coli S17-1, or Pseudomonas putida KT2442 harboring 1,3-propanediol dehydrogenase gene dhaT and aldehyde dehydrogenase gene aldD from P. putida KT2442 which are capable of transforming 1,4-butanediol (1,4-BD) to 4HB. 4HB containing fermentation broth was used for production of homopolymer poly-4-hydroxybutyrate [P(4HB)] and copolymers poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-4HB)]. Recombinant A. hydrophila 4AK4 harboring plasmid pZL-dhaT-aldD containing dhaT and aldD was the most effective 4HB producer, achieving approximately 4 g/l 4HB from 10 g/l 1,4-BD after 48 h of incubation. The strain produced over 10 g/l 4HB from 20 g/l 1,4-BD after 52 h of cultivation in a 6-L fermenter. Recombinant E. coli S17-1 grown on 4HB containing fermentation broth was found to accumulate 83 wt.% of intracellular P(4HB) in shake flask study. Recombinant Ralstonia eutropha H16 grew to over 6 g/l cell dry weight containing 49 wt.% P(3HB-13%4HB) after 72 h.     

Enzyme inhibitors to increase poly-3-hydroxybutyrate production by transgenic tobacco

Chemical regulation of secondary-metabolite synthesis was investigated through the improvement of poly-3-hydroxybutyrate (PHB) production in transgenic tobacco plants by the use of enzyme inhibitors. Two tobacco lines, BC3 and rCAB8, that produce PHB in both the cytosol and plastids were used. An acetyl-CoA carboxylase inhibitor, D-(+)-Quizalofop-ethyl, increased PHB accumulation in both lines 2-fold. The accumulation rate of plastidial PHB in the rCAB8 line was 2.5-fold higher than that of cytosolic PHB in the BC3 line. A specific inhibitor of 3-hydroxy-3-methylglutaryl-CoA reductase, mevastatin, also increased PHB accumulation but only in the BC3 line. These results indicated that chemical regulation of the native metabolic flows by the specific enzyme inhibitors increased secondary-metabolite production in the transgenic tobacco plants we used.     

Methylobacterium rhodesianum produces poly-3-hydroxybutyrate and after mutagenesis in addition exopolysaccharides

Methylobacterium rhodesianum MB 126, a pink-pigmented facultatively methylotrophic bacterium that uses that serine pathway for the assimilation of reduced C₁ compounds, is able to produce poly-3-hydroxybutyrate (PHB) under certain limitation conditions. Mutants of this bacterium, which were isolated after the treatment with sodium nitrite, are impaired in their ability to synthesize PHB, but produce another polymer in addition to PHB, namely an exopolysaccharide (EPS). This paper attempts to explain this surprising behaviour.     

Recovery of poly-3-hydroxybutyrate from recombinant Escherichia coli by homogenization and centrifugation

Poly-3-hydroxybutyrate from recombinant E. coli was recovered using homogenization and continuous centrifugation with a purity of 94%. Final protein and DNA concentrations were 1.0% w/w and 1.9% w/w, respectively, when a hypochlorite treatment was employed prior to centrifugation. High fractional cell debris removal (94%) was achieved with two centrifugation steps.     

变废为宝：利用活性污泥生产生物可降解塑料聚-3-羟基丁酸酯

活性污泥(简称污泥)是废水处理产生的副产物,量大而且难以处理。本研究通过对污泥的高温热裂解处理,获得可用于培养微生物的营养物质。实验发现污泥热裂解液可以取代培养嗜盐单胞菌Halomonas CJN的氮磷源、酵母膏和微量元素,来生产生物可降解塑料聚-3-羟基丁酸酯(PHB)。进一步发现厌氧发酵污泥热裂解液产生的乙酸可以取代葡萄糖来作为碳源支持微生物的生长。这样,可以实现利用污泥热裂解液来生产生物塑料PHB。通过进一步在Halomonas CJN中构建附加PHB合成路径,可以实现完全用污泥热裂解液来高效生产PHB,粗略估计使PHB的制造成本从30 000元/t下降到20 000元/t,实现污泥变废为宝的目标。     

Identification and characterization of the intracellular poly-3-hydroxybutyrate depolymerase enzyme PhaZ of Sinorhizobium meliloti

Background  

S. meliloti forms indeterminate nodules on the roots of its host plant alfalfa (Medicago sativa). Bacteroids of indeterminate nodules are terminally differentiated and, unlike their non-terminally differentiated counterparts in determinate nodules, do not accumulate large quantities of Poly-3-hydroxybutyrate (PHB) during symbiosis. PhaZ is in intracellular PHB depolymerase; it represents the first enzyme in the degradative arm of the PHB cycle in S. meliloti and is the only enzyme in this half of the PHB cycle that remains uncharacterized.     

Transmembrane ion transport by polyphosphate/poly-(R)-3-hydroxybutyrate complexes

Transmembrane ion transport, a critical process in providing energy for cell functions, is carried out by pore-forming macromolecules capable of discriminating among very similar ions and responding to changes in membrane potential. It is widely regarded that ion channels are exclusively proteins, relatively late arrivals in cell evolution. Here we discuss the formation of ion-selective, voltage-activated channels by complexes of two simple homopolymers, namely, inorganic polyphosphates (polyPs) and poly-(R)-3-hydroxybutyrates (PHBs), derived from phosphate and acetate, respectively. Each has unique molecular characteristics that facilitate ion selection, solvation, and transport. Complexes of the two polymers, isolated from bacterial plasma membranes or prepared from the synthetic polymers, form voltage-dependent, Ca2+-selective channels in planar lipid bilayers that are selective for divalent over monovalent cations, permeant to Ca2+, Sr2+, and Ba2+, and blocked by transition metal cations in a concentration-dependent manner. Recently, both polyP and PHB have been found to be components of ion-conducting proteins: namely, the human erythrocyte Ca2+-ATPase pump and the Streptomyces lividans potassium channel. The contribution of polyP and PHB to ion selection and/or transport in these proteins is yet unknown, but their presence gives rise to the hypothesis that these and other ion transporters are supramolecular structures in which proteins, polyP, and PHB cooperate in forming well-regulated and specific cation transfer systems.     

Production and recovery of poly-3-hydroxybutyrate bioplastics using agro-industrial residues of hemp hurd biomass

Bioprocess and Biosystems Engineering - The present study describes production and recovery of poly(3-hydroxybutyrate) P(3HB) from agro-industrial residues. Production was conducted using Ralstonia...     

New poly-(3-hydroxybutyrate)-based systems for controlled release of dipyridamole and indomethacin

New poly-(3-hydroxybutyrate)-based systems for controlled release of anti-inflammatory and antithrombogenic drugs have been studied. The release occurs via two mechanisms (diffusion and degradation) operating simultaneously. Dipyridamole and indomethacin diffusion processes determine the rate of the release at the early stages of the contact of the system with the environment (the first 6-8 days). The coefficient of the release diffusion of a drug depends on its nature, the thickness of the poly-(3-hydroxybutyrate) films containing the drug, the concentrations of dipyridamole and indomethacin, and the molecular weight of the poly-(3-hydroxybutyrate). The results obtained are critical for developing systems of release of diverse drugs, thus, enabling the attainment of the requisite physiological effects on tissues and organs of humans.