Electrochemical sensor based on nitrogen doped graphene: simultaneous determination of ascorbic acid, dopamine and uric acid

Nitrogen doped graphene (NG) was prepared by thermally annealing graphite oxide and melamine mixture. After characterization by atomic force microscopy and X-ray photoelectron spectroscopy etc., the electrochemical sensor based on NG was constructed to simultaneously determine small biomolecules such as ascorbic acid (AA), dopamine (DA) and uric acid (UA). Due to its unique structure and properties originating from nitrogen doping, NG shows highly electrocatalytic activity towards the oxidation of AA, DA and UA. The electrochemical sensor shows a wide linear response for AA, DA and UA in the concentration range of 5.0×10(-6) to 1.3×10(-3)M, 5.0×10(-7) to 1.7×10(-4)M and 1.0×10(-7) to 2.0×10(-5)M with detection limit of 2.2×10(-6)M, 2.5×10(-7)M and 4.5×10(-8)M at S/N=3, respectively. These results demonstrate that NG is a promising candidate of advanced electrode material in electrochemical sensing and other electrocatalytic applications.     

Invertase inhibition based electrochemical sensor for the detection of heavy metal ions in aqueous system: Application of ultra-microelectrode to enhance sucrose biosensor's sensitivity

We are reporting fabrication and characterization of electrochemical sucrose biosensor using ultra-microelectrode (UME) for the detection of heavy metal ions (Hg(II), Ag(I), Pb(II) and Cd(II)). The working UME, with 25 microm diameter, was modified with invertase (INV, EC: 3.2.1.26) and glucose oxidase (GOD, EC: 1.1.3.4) entrapped in agarose-guar gum. The hydrophilic character of the agarose-guar gum composite matrix was checked by water contact angle measurement. The atomic force microscopy (AFM) images of the membranes showed proper confinement of both the enzymes during co-immobilization. The dynamic range for sucrose biosensor was achieved in the range of 1 x 10(-10) to 1 x 10(-7)M with lower detection limit 1 x 10(-10)M at pH 5.5 with 9 cycles of reuse. The spectrophotometric and electrochemical studies showed linear relationship between concentration of heavy metal ions and degree of inhibition of invertase. The toxicity sequence for invertase using both methods was observed as Hg(2+)>Pb(2+)>Ag(+)>Cd(2+). The dynamic linear range for mercury using electrochemical biosensor was observed in the range of 5 x 10(-10) to 12.5 x 10(-10)M for sucrose. The lower detection limit for the fabricated biosensor was found to be 5 x 10(-10)M. The reliability of the electrochemical biosensor was conformed by testing the spike samples and the results were comparable with the conventional photometric DNSA method.     

Liquid chromatography with amperometric detection using functionalized multi-wall carbon nanotube modified electrode for the determination of monoamine neurotransmitters and their metabolites

The fabrication and application of a novel electrochemical detection (ED) method with the functionalized multi-wall carbon nanotubes (MWNTs) chemically modified electrode (CME) for liquid chromatography (LC) were described. The electrochemical behaviors of dopamine (DA) and other monoamine neurotransmitters at the CME were investigated by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The results indicated that the CME exhibited efficient electrocatalytic effects on the current responses of monoamine neurotransmitters and their metabolites with high sensitivity, high stability and long-life activity. In LC-ED, DA, norepinephrine (NE), 3-methoxy-4-hydroxyphenylglycol (MHPG), 3,4-dihydroxyphenylacetic acid (DOPAC), 5-hydroxytryptamine (5-HT), 5-hydroxyindoleacetic acid (5-HIAA) and homovanillic acid (HVA) had good and stable current responses at the CME. The linear ranges of seven analytes were over four orders of magnitude and the detection limits were 2.5 x 10(-10) mol/l for DA, 2.5 x 10(-10) mol/l for NE, 5.0 x 10(-10) mol/l for MHPG, 3.0 x 10(-10) mol/l for DOPAC, 3.5 x 10(-10) mol/l for 5-HT, 6.0 x 10(-10) mol/l for 5-HIAA, 1.25 x 10(-9) mol/l for HVA. The application of this method coupled with microdialysis sampling for the determination of monoamine neurotransmitters and their metabolites in Parkinsonian patients' cerebrospinal fluid was satisfactory.     

Electrooxidation of peroxynitrite in simulated body fluid at platinum electrode.

Peroxynitrite, a potent albeit deleterious biological oxidant, was electrooxidized at a bare platinum electrode in a medium of simulated body fluid (SBF) to nitrite anion and molecular oxygen. The SBF, prepared in accordance with literature procedure, has a pH of 7.4 and an ionic strength of 0.16. In this medium, peroxynitrite was observed to undergo a diffusion-controlled (D=1.63 x 10(-5) cm2/s) oxidation process at a bare platinum electrode with a heterogeneous rate constant, k(s), of 0.029 cm/sec. The formal redox potential, Eo', of this biological oxidant was determined as 1.18 V with respect to saturated calomel electrode (SCE) in a 2e- oxidation process. The electrochemical response of the oxidation process, measured in unit of current, is observed to be concentration dependent with a limit of detection of 1.6 x 10(-7) M. The linear dynamic range of the observed current-concentration plot extends over the entire concentration range studied. These observations make this electrochemical method a feasible technique for quantitative determination of peroxynitrite in vivo and in vitro.     

An endogenous SCP-related peptide modulates ciliary beating in the gills of a venerid clam, Mercenaria mercenaria

The activities of both the lateral and frontal cilia of Mercenaria mercenaria were unaffected, either by the two endogenous SCP-related peptides AMSFYFPRMamide and YFAFPRQamide, or by FMRFamide (all at 10(-6) M). Dopamine (DA) inhibited the lateral cilia; the mean EC50 was 2 x 10(-6) M. The peptide YFAFPRQamide--but neither AMSFYFPRMamide nor FMRFamide--antagonized the inhibition induced by DA; this effect was dependent on both time and dose. At a DA concentration of 5 x 10(-7) M, the effect of YFAFPRQamide appeared within 20 min and became maximal within 40-60 min; the mean EC50 at these times was 4.7 x 10(-11) M. If the concentration of DA was increased to 10(-6) M, the maximal effect of the peptide was delayed to 50 min, and the mean EC50 increased to 1.1 x 10(-7) M. Particle transport by the frontal cilia was inhibited by 5-hydroxytryptamine (5HT); the mean EC50 was 5.7 x 10(-7) M. Again, only YFAFPRQamide had an antagonistic effect on the 5HT-induced inhibition. At a 5HT concentration of 10(-6) M, the effects of YFAFPRQamide did not appear until 45 min; the mean EC50 was 10(-6) M. When radioimmunoassayed with an SCP antiserum, the elution profile of a gill extract overlapped those of the SCP-related peptides that had previously been identified in extracts of whole animals. These data suggest that all three SCP analogs occur in the gill. Immunohistochemistry of the gill, carried out with a monoclonal antibody raised to SCPB, stained many varicose neuronal fibers. Most of these were associated with the gill musculature, but a sparse innervation of the filaments underlying the cilia was also observed. Some fluorescent nerve cell bodies were also seen in the gill tissue. Our results are consistent with the hypothesis that YFAFPRQamide modulates branchial activities--muscular as well as ciliary--that are associated with feeding.     

Electrochemical sensor for dopamine based on a novel graphene-molecular imprinted polymers composite recognition element

A novel composite of graphene sheets/Congo red-molecular imprinted polymers (GSCR-MIPs) was synthesized through free radical polymerization (FRP) and applied as a molecular recognition element to construct dopamine (DA) electrochemical sensor. The template molecules (DA) were firstly absorbed at the GSCR surface due to their excellent affinity, and subsequently, selective copolymerization of methacrylic acid (MAA) and ethylene glycol dimethacrylate (EGDMA) was further achieved at the GSCR surface. Potential scanning was presented to extract DA molecules from the imprinted polymers film, and as a result, DA could be rapidly and completely removed by this way. With regard to the traditional MIPs, the GSCR-MIPs not only possessed a faster desorption and adsorption dynamics, but also exhibited a higher selectivity and binding capacity toward DA molecule. As a consequence, an electrochemical sensor for highly sensitive and selective detection of DA was successfully constructed as demonstration based on the synthesized GSCR-MIPs nanocomposites. Under experimental conditions, selective detection of DA in a linear concentration range of 1.0 × 10(-7)-8.3 × 10(-4)M was obtained, which revealed a lower limit of detection and wider linear response compared to some previously reported DA electrochemical MIPs sensors. The new DA electrochemical sensor based on GSCR-MIPs composites also exhibited excellent repeatability, which expressed as relative standard deviation (RSD) was about 2.50% for 30 repeated analyses of 20 μM DA.     

Simple determination of trace amounts of anionic surfactants in river water by spectrophotometry combined with solid-phase extraction

A simple and sensitive spectrophotometric method combined with solid-phase extraction (SPE) for the simultaneous determination of sodium linear-dodecylbenzenesulfonate (DBS) and sodium dodecyl sulfate (SDS) is described. The C2 (ethyl group bonded silicagel) cartridge could be repeatedly used more than 500 times for SPE, and it enabled the anionic surfactants to be concentrated by 50-fold. The calibration graph for DBS was linear in the range from 1.6 x 10(-8) M to 5.0 x 10(-7) M and for SDS from 2.0 x 10(-9) M to 3.0 x 10(-7) M. The relative standard deviation (n=5) for 5.0 x 10(-7) M DBS was 3.1% and for 2.5 x 10(-7) M SDS was 1.7%. The proposed method was applied to the simultaneous determination of DBS and SDS in river-water samples.     

Simultaneous determination of dopamine, ascorbic acid, and uric acid using carbon ionic liquid electrode

A recently constructed carbon composite electrode using room temperature ionic liquid as pasting binder was employed as a novel electrode for sensitive, simultaneous determination of dopamine (DA), ascorbic acid (AA), and uric acid (UA). The apparent reversibility and kinetics of the electrochemical reaction for DA, AA, and UA found were improved significantly compared to those obtained using a conventional carbon paste electrode. The results show that carbon ionic liquid electrode (CILE) reduces the overpotential of DA, AA, and UA oxidation, without showing any fouling effect due to the deposition of their oxidized products. In the case of DA, the oxidation and reduction peak potentials appear at 210 and 135mV (vs Ag/AgCl, KCl, 3.0M), respectively, and the CILE shows a significantly better reversibility for dopamine. The oxidation peak due to the oxidation of AA occurs at about 60mV. For UA, a sharp oxidation peak at 340mV and a small reduction peak at 250mV are obtained at CILE. Differential pulse voltammetry was used for the simultaneous determination of ternary mixtures of DA, AA, and UA. Relative standard deviation for DA, AA, and UA determinations were less than 3.0% and DA, AA, and UA can be determined in the ranges of 2.0x10(-6)-1.5x10(-3), 5.0x10(-5)-7.4x10(-3), and 2.0x10(-6)-2.2x10(-4)M, respectively. The method was applied to the determination of DA, AA, and UA in human blood serum and urine samples.     

A novel sensor based on electrochemical polymerization of diglycolic acid for determination of acetaminophen

Diglycolic acid (DA) polymer was coated on glassy carbon (GC) electrode by cyclic voltammetry (CV) technique for the first time. The electrochemical performances of the modified electrode were investigated by CV and electrochemical impedance (EIS). The obtained electrode showed an excellent electrocatalytic activity for the oxidation of acetaminophen (ACOP). A couple of well-defined reversible electrochemical redox peaks were observed on the ploy(DA)/GC electrode in ACOP solution. Compared with bare GC electrode, the oxidation peak potential of ACOP on ploy(DA)/GC electrode moved from 0.289 V to 0.220 V. Meanwhile, the oxidation peak current was much higher on the modified electrode than that on the bare GC electrode, indicating DA polymer modified electrode possessed excellent performance for the oxidation of ACOP. This kind of capability of the modified electrode can be enlisted for the highly sensitive and selective determination of ACOP. Under the optimized conditions, a wide linear range from 2 × 10(-8) to 5.0 × 10(-4)M with a correlation coefficient 0.9995 was obtained. The detection limit was 6.7 × 10(-9)M (at the ratio of signal to noise, S/N=3:1). The modified electrode also exhibited very good stability and reproducibility for the detection of ACOP. The established method was applied to the determination of ACOP in samples. An average recovery of 100.1% was achieved. These results indicated that this method was reliable for determining ACOP.     

Studies on sildenafil citrate (Viagra) interaction with DNA using electrochemical DNA biosensor

The interaction of sildenafil citrate (Viagra) with DNA was studied by using an electrochemical DNA biosensor. The binding mechanism of sildenafil citrate was elucidated by using constant current potentiometry and differential pulse voltammetry at DNA-modified glassy carbon electrode. The decrease in the guanine oxidation peak area or peak current was used as an indicator for the interaction in 0.2M acetate buffer (pH 5). The binding constant (K) values obtained were 2.01+/-0.05 x 10(5) and 1.97+/-0.01 x 10(5)M(-1) with constant current potentiometry and differential pulse voltammetry, respectively. A linear dependence of the guanine peak area or peak current was observed within the range of 1-40 microM sildenafil citrate with slope=-2.74 x 10(-4)s/microM, r=0.989 and slope=-2.78 x 10(-3)microA/microM, r=0.995 by using constant current potentiometry and differential pulse voltammetry, respectively. Additionally, binding constant values for sildenafil citrate-DNA interaction were determined for the pH range of 4-8 and in biological fluids (serum and urine) at pH 5. The influence of sodium and calcium ions was also studied to elucidate the mechanism of sildenafil citrate-DNA interaction under different solution conditions. The present study may prove to be helpful in extending our understanding of the anticancer activity of sildenafil citrate from cellular to DNA level.     

HRP/[Zn-Cr-ABTS] redox clay-based biosensor: design and optimization for cyanide detection

A novel inexpensive and simple amperometric biosensor, based on the immobilization of HRP into redox active [Zn-Cr-ABTS] layered double hydroxide, is applied to the determination of cyanide. The electrochemical transduction step corresponds to the reduction at 0.0 V of ABTS+* enzymatically formed in the presence of H2O2. The biosensor has a fast response to H2O2 (8s) with a linear range of 1.7 x 10(-9) to 2.1 x 10(-6) M and a sensitivity of 875 mA M(-1) cm(-2). The apparent Michaelis-Menten constant (KMapp) is 12 microM. The detection of cyanide is performed via its non competitive inhibiting action on the HRP/[Zn-Cr-ABTS] electrode. The concentration range of the linear response and the apparent inhibition constant (ki) are 5 x 10(-9) to 4 x 10(-8) and 1.4 x 10 (-7) M, respectively.     

Electrochemical determination of interaction parameters for DNA and mitoxantrone in an irreversible redox process

Mitoxantrone (MXT), an anti-tumor antibiotic, shows irreversible electrochemical behavior at a waxed graphite electrode in a 0.05 M Tris-HCl buffer (pH 7.4) solution. The interaction between MXT and calf thymus DNA (ctDNA) in solution has been studied using cyclic voltammetry. An electrochemical equation suitable for examining the binding of irreversibly electroactive molecules to DNA is established. Determination of diffusion coefficients of both free and binding MXT (D(f), D(b)), the binding constant (K) and binding site size (s base pairs per molecule, bp) of MXT with DNA was performed on the basis of the equation. A nonlinear fit analysis of the experimental data yielded: D(f)=3.76 x 10(-5) cm(2)s(-1), D(b)=2.73 x 10(-7) cm(2)s(-1), K=8.7 x 10(9) cm(3)mol(-1), s=2.8 bp. The results demonstrate that MXT binds tightly to ctDNA and covers three base pairs. The anthraquinone of MXT, which is a planar heterocyclic ring, intercalates between the DNA's base pairs. The two aminoethylamino side-chains of the drug fit to the major groove reinforce the combination of MXT and DNA. The results show that MXT is a DNA intercalator with a high binding constant compared to those of other anthraquinones.     

Effects of norepinephrine on lung liquid production by in vitro lungs from fetal guinea pigs

Lungs from near-term fetal guinea pigs (61 +/- 2 days of gestation) were supported in vitro for 3 h; lung liquid production was monitored by a dye dilution method. Untreated control preparations produced fluid at 1.38 +/- 0.30 mL x kg(-1) body weight x h(-1), with no significant change (ANOVA; regression analysis); those given 1.24 x 10(-9) or 1.24 x 10(-8) M norepinephrine during the middle hour showed no significant change, but those given concentrations between 5.24 x 10(-8) and 1.24 x 10(-5) M all showed significant reductions or fluid reabsorption (based on 42 fetuses). The responses showed a linear relationship with the log concentration (r = 0.97). They appeared to involve alpha-adrenoreceptors, since responses to 10(-7) M norepinephrine were unaffected by 10(-6) M propranolol, but those to 10(-7) and 1.24 x 10(-6) M norepinephrine were abolished by 10(-6) and 1.78 x 10(-5) M phentolamine, respectively (based on 48 fetuses). Activation was through alpha2-adrenoreceptors, since responses to 10(-7) and 10(-5) M norepinephrine were abolished by 10(-4) M yohimbine, but not by 10(-5) M prazosin (based on 60 fetuses). The results show that norepinephrine is able to reduce lung liquid production when at plasma levels present at birth, and that it can produce reabsorption; unlike epinephrine, there was no reduction in responses at high concentrations. This work reintroduces a neglected factor, norepinephrine, into possible controls of lung liquid reabsorption, and opens up the potential for neural controls.     

Colloidal gold as an electrochemical label of streptavidin-biotin interaction

A new electrochemical method to monitor biotin-streptavidin interaction, based on the use of colloidal gold as an electrochemical label, is investigated. Biotinylated albumin is adsorbed on the pretreated surface of a carbon paste electrode (CPE). This modified electrode is immersed in colloidal gold-streptavidin labelled solutions. Adsorptive voltammetry is used to monitor colloidal gold bound to streptavidin, obtaining a good reproducibility of the analytical signal (R.S.D. = 3.3%). A linear relationship between peak current and streptavidin concentration from 2.5 x 10(-9) to 2.5 x 10(-5) M is obtained when a sequential competitive assay between streptavidin and colloidal gold-labelled streptavidin is carried out. On the other hand, the adsorption of streptavidin on the electrode surface was performed, followed by the reaction with biotinylated albumin labelled with colloidal gold. In this way, a linear relationship between peak current and colloidal gold labelled biotinylated albumin concentration is achieved with a limit of detection of 7.3 x 10(9) gold particles per ml (5.29 x 10(-9) M in biotin).     

Investigation of the interaction between ssDNA and 2-aminophenoxazine-3-one and development of an electrochemical DNA biosensor

An electrochemical method was used to probe the interaction between 2-aminophenoxazine-3-one (AP) and the short DNA sequence related to the hepatitis B virus (HBV), and an electrochemical DNA biosensor was developed. The voltammetric signals of AP have been investigated at bare glassy carbon electrode (bare GCE), hybrid double-stranded DNA-modified GCE (dsDNA/GCE), and single-stranded DNA-modified GCE (ssDNA/GCE) by means of differential pulse voltammetry (DPV), and the peak currents increased with respect to the order of electrodes. The extent of hybridization was evaluated on the basis of the difference between signals of AP with a probe before and after hybridization with the complementary sequence. Control experiments with noncomplementary were performed to test the selectivity of the biosensor. With this approach, a sequence of the HBV could be quantified over the range from 3.53 x 10(-7) to 1.08 x 10(-6) M, with a linear correlation of r = 0.9963 and a detection limit of 1.00 x 10(-7) M.     

Toxic and cytogenetic effects induced in Allium cepa with low concenrations of Cd and 232th

232Th (7.76 x 10(-7) M) and Cd (0.89 x 10(-8) M) in concentrations which do not exceed officially prescribed standards when entering with water do not increase the frequency of chromosome aberrations in comparison with the control. Such concentrations do not cause toxic effects in plants on the levels of tissues and of the whole organism but they do display their activity on the cell level damaging division spindle. Dependence "cadmium concentration-effect" is not linear for any type of cytogenetical damages. At the concentration of cadmium 0.89 x 10(-7) M its influence on formation of division spindle is weakened and the frequency of chromosome aberrations is reducing in comparison with the control and with the effects induced at lower concentrations of cadmium in solution (0.89 x 10(-8) M). Cadmium in high concentration (5.34 x 10(-5) M) causes significant toxic and mutagenic effects.     

A novel nitric oxide biosensor based on electropolymerization poly(toluidine blue) film electrode and its application to nitric oxide released in liver homogenate

A novel poly(toluidine blue)-modified electrode has been constructed for the determination of nitric oxide in biological sample. The electrochemical behavior of poly(toluidine blue) film electrode and its electrocatalytic activity toward NO were studied in detail by cyclic voltammetry. Possible interferences were tested and evaluated after further coated with Nafion. The poly(toluidine blue) and Nafion composite film-modified electrode exhibits a good linear relationship over a NO concentration of 1.8 x 10(-7) to 8.6 x 10(-5)mol/L, and the detection limit is 1.8 x 10(-8)mol/L (S/N=3). NO release from the rat liver homogenate stimulated by l-arginine was studied, and the responses were decreased by the nitric oxide synthase inhibitor N(omega)-nitro-l-arginine.     

Determination of L-cysteine in amino acid mixture and human urine by flow-injection analysis with a biamperometric detector.

Based on the electrocatalytic oxidation of cysteine at pretreated platinum electrode and the flow-injection biamperometry for irreversible couple, a novel electrochemical detector is proposed for the selective determination of cysteine in amino acid mixtures and human urine samples. A thin-layer flow through cell was used to achieve large electrode surface area to volume ratio. Two identical pretreated platinum electrodes were mounted in the cell with an applied potential difference of 10 mV. By coupling two independent and irreversible electrode processes, namely, the oxidation of cysteine and the reduction of platinum oxide, the biamperometric detection scheme has been established. The resulting current is linear to cysteine over the range 4 x 10(-7)-4 x 10(-5) M with the detection limit 1 x 10(-7) M (15 pmol). The selectivity of the detector is tested by 55 foreign species including 26 ions, 11 amino acids, 6 vitamins, and 12 other compounds possibly found in urine. The detector performs well as a routine assay, showing high efficiency (180 samples/h) and good reproductivity shown by a RSD of 0.6% for eight repeated determinations of 2 x 10(-6) M cysteine. The urine samples are detected directly without the need of pretreatment or adding other reagents.     

Glucose biosensor based on Au nanoparticles-conductive polyaniline nanocomposite

In this paper, we report a novel glucose biosensor based on composite of Au nanoparticles (NPs)-conductive polyaniline (PANI) nanofibers. Immobilized with glucose oxidase (GOx) and Nafion on the surface of nanocomposite, a sensitive and selective biosensor for glucose was successfully developed by electrochemical oxidation of H2O2. The glucose biosensor shows a linear calibration curve over the range from 1.0x10(-6) to 8.0x10(-4) mol/L, with a slope and detection limit (S/N=3) of 2.3 mA/M and 5.0x10(-7) M, respectively. In addition, the glucose biosensor system indicates excellent reproducibility (less than 5% R.S.D.) and good operational stability (over 2 weeks).     

A sensitive nonenzymatic glucose sensor in alkaline media with a copper nanocluster/multiwall carbon nanotube-modified glassy carbon electrode

Copper (Cu) nanoclusters were electrochemically deposited on the film of a Nafion-solubilized multiwall carbon nanotube (CNTs)-modified glassy carbon electrode (CNTs-GCE), which fabricated a Cu-CNTs composite sensor (Cu-CNTs-GCE) to detect glucose with nonenzyme. Transmission electron microscopy (TEM) and X-ray diffraction (XRD) were used for the characterization of the distribution of the Cu nanoclusters on the CNTs matrix. The composite of the Cu-CNTs was investigated by the electrochemical characterization of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The preliminary study shows that the nonenzymatic sensor has synergistic electrocatalytic activity to the oxidation of glucose in alkaline media. A well applicable sensor was constructed to use for the analysis of the glucose in real blood serum samples due to the large number of electrons taking part in the oxidation process, the high apparent kinetic rate constant, and the stable operation of the electrode. The linear range for the detection of the glucose is 7.0 x 10(-7) to 3.5 x 10(-3) M with a high sensitivity of 17.76 microA mM(-1), a low detection limit of 2.1 x 10(-7) M, and a fast response time of within 5s. Experiment results also showed that the sensor has good reproducibility and long-term stability and is interference free.