Metabolic,physiological and kinetic aspects of the alcoholic fermentation of whey permeate by Kluyveromyces fragilis NRRL 665 and Kluyveromyces lactis NCYC 571

Optimum growth conditions for the fermentation of non-concentrated whey permeate by Kluyveromyces fragilis NRRL 665 have been defined. Use of 3.75 g yeast extract l^?1, a growth temperature of 38°C and a pH of 4.0 allowed a maximum productivity of 5.23 g ethanol l^?1 h^?1 in continuous culture with a yield 91% of theoretical. Complete batch fermentation of permeate with 100 g lactose l^?1 was possible with a maximum specific growth rate of 0.276 h^?1 without any change in ethanol yield. Fermentation of concentrated permeate resulted, however, in a general decrease of specific substrate consumption rate, demonstrated by the inability to completely convert an initial 90 or 150 g lactose l^?1 in continuous culture, even at dilution rates as low as 0.05 and 0.08 h^?1, respectively. The decrease could be related to substrate inhibition, to an increase in osmotic pressure caused by lactose and salts, and to ethanol inhibition of both alcohol and biomass yield. The decrease in specific productivity could be counterbalanced by use of high cell density cultures, obtained by cell recycle of K. fragilis. Fermentation of a non-concentrated permeáte at a dilution rate of 1 h^?1 resulted in a productivity of 22 g l^?1 h^?1 at 22 g ethanol l^?1. Cell recycle using flocculating Kluyveromyces lactis NCYC 571 was also tested. With this strain a productivity of 9.3 g l^?1 h^?1 at 45 g product l^?1 was attained at a dilution rate of 0.2 h^?1, with an initial lactose concentration of 95 g l^?1.     

Whey disposal by deproteinization and fermentation

The non-pollutant plant support material of the dwarf duckweed Wolffia arrhiza (Fam. Lemnaceae) was used for the entrapment of living yeast cells (Kluyveromyces fragilis) which hydrolyse lactose with the subsequent fermentation of glucose and galactose at high cell densities (up to 7.0 × 10⁸/ml support). The stabile yeast-plant cell immobilizates are able to produce ethanol from lactose-containing media (e.g. whey) by batch fermentation (on a rotary shaker) or continuous fermentation (in a turbulence reactor) for several days (at a pH below 4.2 and a temperature of 30°C). The removal of whey proteins by a preceding heat denaturation of whey, high dilution rates, C_So values of 50 to 60 g lactose per litre whey and the preferential use of the K. fragilis strain DSM 7238 were determined as the prerequisites for an optimum continuous fermentation. Economically interesting productivities (P_max ? 15 g ethanol/1 · h, D = 0.72 h^?1) with an actual lactose turnover of 90% were obtained by using these parameters.     

Hollow fibre bioreactor for ethanol production: Application to the conversion of lactose by Kluyveromyces fragilis

Kluyveromyces fragilis cells have been packed into the shell side of an industrial size hollow fibre module. The feed was pumped through the tube side under pressure. During continuous, single-pass operation with a synthetic lactose medium containing 50 g l^?1lactose, ethanol productivity was 30–60 g l^?1h^?1at dilution rates of 1–4 h^?1. With 150 g l^?1lactose concentration, the productivity was 100–135 g l^?1h^?1. Productivity was generally lower when cottage cheese whey permeate (45 g l^?1lactose) was used as the feed. Long-term stability of the hollow fibre bioreactor was good, provided adequate care was taken to bleed the gas generated and restrict cell concentration in the shell side.     

Optimization of fermentation conditions for ethanol production from whey

Summary Optimal conditions for ethanol production in 7% whey solutions by the yeast Candida pseudotropicalis ATCC 8619 included initial pH of 4.57 and 30°C. Complete fermentation of the available lactose took place without supplementary nutrients; additions of nitrogen or phosphorus salts, yeast extract or corn steep liquor resulted in increased yeast production and lower ethanol yields. A positive correlation was observed between increases in yeast inocula and lactose utilization and ethanol production rates; 8.35 g/l of ethanol was obtained within 22 h by using yeast inoculum of 13.9 g/l. No differences in fermentation rates or ethanol yields were observed when whole or deproteinized whey solutions were used. Concentrated whey permeates, obtained after removal of the valuable proteins from whey, can be effectively fermented for ethanol production.     

Evolutionary adaptation of Kluyveromyces marxianus strain for efficient conversion of whey lactose to bioethanol

The aim of the present work is to develop an osmotolerant yeast strain with high lactose utilization and further use it to ferment lactose rich whey permeate for high ethanol titer and to reduce energy consumption. Ethanol production and growth rate of selected MTCC 1389 strain were quite high in whey containing lactose up to 150 g/L but it remains constant in lactose concentration (200 g/L) as cells encountered osmotic stress. Thus, strain MTCC 1389 was used for an adaptation to lactose concentration 200 g/L for 65 days and used further for fermentation of lactose rich whey. Fermentation with an adapted K. marxianus MTCC 1389 strain in laboratory fermenter resulted in ethanol titer of 79.33 g/L which is nearly 17.5% higher than the parental strain (66.75 g/L). Expression analysis of GPD1, TPS1and TPS2 found upregulated in lactose adapted K. marxianus strain as compared to the parental strain. These results suggest that an adapted K. marxianus strain accumulates glycerol and trehalose in response to lactose stress and improve osmotolerance in K. marxianus cells. Thus, the study illustrates that evolutionary engineering is an efficient strategy to obtain a superior biofuel yeast strain, which efficiently ferments four-fold concentrated cheese whey.     

Comparison of yeast strains for batch ethanol fermentation of cheese-whey powder (CWP) solution

AIMS: To test the suitability of cheese whey powder (CWP) solution for ethanol fermentation and to compare performances of different Kluyveromyces marxianus strains for ethanol fermentation from CWP solution. METHODS AND RESULTS: Batch ethanol fermentation of cheese whey (CW), CWP and lactose solutions with the same initial sugar contents were compared by using two different K. marxianus strains and the CWP solution was found to be the most suitable substrate. CWP solution was fermented to ethanol using three different yeast strains and DSMZ-7239 was found to be the most suitable one yielding the highest rate and extent (3.3%, v/v) of ethanol formation. CONCLUSIONS: CWP solution and K. marxianus strain of DSMZ-7239 were found to be more suitable for ethanol fermentation with the highest ethanol yield when compared with the other substrates and the yeast strains tested. SIGNIFICANCE AND IMPACT OF THE STUDY: CWP can be used as a concentrated form of CW for ethanol fermentations with considerable advantages.     

Fed-batch fermentation to produce oligonucleotides from Kluyveromyces marxianus grown on whey

Oligonucleotides (ON) extracted from yeasts are used as antiviral agents, immunostimulators, and flavour enhancers. Fed-batch fermentation of cheese whey by Kluyveromyces marxianus was carried out to produce high biomass yields to extract ON. K marxianus was grown for 20 h in medium containing 5% (w/v) dehydrated whey, at 30°C (pH 4.5), with agitation (350 rpm), and under aeration (1.0–2.0 vvm). After 20 h, media containing 10–15% (w/v) of dehydrated whey were added at different flow rates (180–230 ml/h). Samples were analyzed at 6–8 h intervals for cell count, lactose consumption, and ethanol production. Maximum production of biomass (28.13 g/l), yield (0.58 g/g), productivity (2.42 g/l per h), and specific growth rate (0.63 1/h) were obtained when medium containing 15% (w/v) of whey was added at 180 ml/h under 2 vvm aeration. Fed-batch fermentation converted 95% of whey lactose into biomass.     

Batch propagation of Lactobacillus helveticus for production of lactic acid from lactose concentrated cheese whey with microaeration and nutrient supplementation

Continuous mix batch bioreactors were used to study the kinetic parameters of lactic acid fermentation in microaerated-nutrient supplemented, lactose concentrated cheese whey using Lactobacillus helveticus. Four initial lactose concentrations ranging from 50 to 150 g l^–1 were first used with no microaeration and no yeast extract added to establish the substrate concentration above which inhibition will occur and then the effects of microaeration and yeast extract on the process kinetic parameters were investigated. The experiments were conducted under controlled pH (5.5) and temperature (42 °C) conditions. The results indicated that higher concentrations of lactose had an inhibitory effect as they increased the lag period and the fermentation time; and decreased the specific growth rate, the maximum cell number, the lactose utilization rate, and the lactic acid production rate. The maximum lactic acid conversion efficiency (75.8%) was achieved with the 75 g l^–1 initial lactose concentration. The optimum lactose concentration for lactic acid production was 75 g l^–1 although Lactobacillus helveticus appeared to tolerate up to 100 g l^–1 lactose concentration. Since the lactic acid productivity is of a minor importance compared to lactic acid concentration when considering the economic feasibility of lactic acid production from cheese whey using Lactobacillus helveticus, a lactose concentration of up to 100 g l^–1 is recommended. Using yeast extract and/or microaeration increased the cell number, specific growth rate, cell yield, lactose consumption, lactic acid utilization rate, lactic acid concentration and lactic acid yield; and reduced the lag period, fermentation time and residual lactose. Combined yeast extract and microaeration produced better results than each one alone. From the results it appears that the energy uncoupling of anabolism and catabolism is the major bottleneck of the process. Besides lactic acid production, lactose may also be hydrolysed into glucose and galactose. The -galactosidase activity in the medium is caused by cell lysis during the exponential growth phase. The metabolic activities of Lactobacillus helveticus in the presence of these three sugars need further investigation.     

Alcohol production from cheese whey permeate using genetically modified flocculent yeast cells.

Alcoholic fermentation of cheese whey permeate was investigated using a recombinant flocculating Saccharomyces cerevisiae, expressing the LAC4 (coding for beta-galactosidase) and LAC12 (coding for lactose permease) genes of Kluyveromyces marxianus enabling for lactose metabolization. Data on yeast fermentation and growth on cheese whey permeate from a Portuguese dairy industry is presented. For cheese whey permeate having a lactose concentration of 50 gL(-1), total lactose consumption was observed with a conversion yield of ethanol close to the expected theoretical value. Using a continuously operating 5.5-L bioreactor, ethanol productivity near 10 g L(-1) h(-1) (corresponding to 0.45 h(-1) dilution rate) was obtained, which raises new perspectives for the economic feasibility of whey alcoholic fermentation. The use of 2-times concentrated cheese whey permeate, corresponding to 100 gL(-1) of lactose concentration, was also considered allowing for obtaining a fermentation product with 5% (w/v) alcohol.     

Immobilized <Emphasis Type="Italic">Kluyveromyces marxianus</Emphasis> cells in carboxymethyl cellulose for production of ethanol from cheese whey: experimental and kinetic studies

Cheese whey fermentation to ethanol using immobilized Kluyveromyces marxianus cells was investigated in batch and continuous operation. In batch fermentation, the yeast cells were immobilized in carboxymethyl cellulose (CMC) polymer and also synthesized graft copolymer of CMC with N-vinyl-2-pyrrolidone, denoted as CMC-g-PVP, and the efficiency of the two developed cell entrapped beads for lactose fermentation to ethanol was examined. The yeast cells immobilized in CMC-g-PVP performed slightly better than CMC with ethanol production yields of 0.52 and 0.49 g ethanol/g lactose, respectively. The effect of supplementation of cheese whey with lactose (42, 70, 100 and 150 g/l) on fermentative performance of K. marxianus immobilized in CMC beads was considered and the results were used for kinetic studies. The first order reaction model was suitable to describe the kinetics of substrate utilization and modified Gompertz model was quite successful to predict the ethanol production. For continuous ethanol fermentation, a packed-bed immobilized cell reactor (ICR) was operated at several hydraulic retention times; HRTs of 11, 15 and 30 h. At the HRT of 30 h, the ethanol production yield using CMC beads was 0.49 g/g which implies that 91.07 % of the theoretical yield was achieved.     

Homo-fermentative production of d-lactic acid by Lactobacillus sp. employing casein whey permeate as a raw feed-stock

Casein whey permeate (CWP), a lactose-enriched dairy waste effluent, is a viable feed stock for the production of value-added products. Two lactic acid bacteria were cultivated in a synthetic casein whey permeate medium with or without pH control. Lactobacillus lactis ATCC 4797 produced d-lactic acid (DLA) at 12.5 g l^?1 in a bioreactor. The values of Leudking–Piret model parameters suggested that lactate was a growth-associated product. Batch fermentation was also performed employing CWP (35 g lactose l^?1) with casein hydrolysate as a nitrogen supplement in a bioreactor. After 40 h, L. lactis produced 24.3 g lactic acid l^?1 with an optical purity >98 %. Thus CWP may be regarded as a potential feed-stock for DLA production.     

Ethanol production from pentoses by immobilized microorganisms

The capabilities of immobilized Fusarium oxysporum f. sp. lini, Mucor sp., and Saccharomyces cerevisiae in fermenting pentose to ethanol have been compared. S. cerevisiae was found to have the best fermentation rate on d-xylulose of 0.3 g l^?1 h^?1. By using a separate isomerase column for converting d-xylose to d-xylulose and a yeast column for converting d-xylulose to ethanol, an ethanol concentration of 32 g l^?1 was obtained from 10% d-xylose. The ethanol yield was calculated to be 64% of the theoretical yield.     

Optimizing alcohol production from whey using computer technology

This study was undertaken with the major goal of optimizing the ethanol production from whey using computer technology. To reach this goal, a mathematical model that would describe the fermentation and that could be used for the optimization was developed. Kluyveromyces fragilis was the microorganism used to ferment the lactose in the whey into ethanol. Preliminary studies showed that K. fragilis produced about 90% of the theoretical ethanol yield when grown in whey-complemented media. However, when this yeast is grown in nonsupplemented whey media, it does not produce more than 32% of that yield. Comparative batch fermentations of lactose and whey-complemented media showed that whey possibly contains enhancing components for yeast growth and ethanol production. To obtain the mathematical model, the one-to-one effect of the process variables (lactose and yeast extract concentrations, air flowrate, pH, and dilution rate) on the ethanol production were first investigated. Experiments on the pH effect showed that a decrease in pH from 7 to 4 produced an increase in ethanol concentration from 16.5 to 26.5 g/L (50 g/L initial lactose). The results obtained from modeling of the continuous fermentation using the previously listed variables showed that air flowrate, pH, and dilution rate were the process variables that most influence the production of ethanol.     

Control of ethanol production and monitoring of membrane performance by mass-spectrometric gas analysis in the coupled fermentation-pervaporation of whey permeate

A coupled fermentation-pervaporation process was operated continuously with on-line mass spectrometric gas analysis monitoring of product accumulation on both the upstream and the downstream sides of the membrane. Efficient coupling of the fermentation with pervaporation was attained when a steady state of ethanol production and removal was achieved with whey permeate containing high concentrations of lactose (>8%) or by controlled lactose additions that also compensated for loss of liquid due to pervaporation. The combined system consists of a tubular membrane pervaporation module, directly connected to a stirred fermentor to form one circulation loop, kept at 38°C, with both units operating under computer control. Mass spectrometric gas analysis of the CO₂ gas evolved in the fermentor and the ethanol and water in the pervaporate on the downstream side of the membrane enabled us to follow the production of ethanol and its simultaneous removal. Membrane selectivity was calculated on-line and served to monitor the functioning of the membrane. Batch-wise-operated fermentation-pervaporation with Candida pseudotropicalis IP-513 yielded over 120 gl^–1 of concentrated ethanol solution using supplemented whey permeate containing 16% lactose. A steady state lasting for about 20 h was achieved with ethanol productivity of 20 g h^–1 (approx. 4 g l^–1 h^–1). Membrane selectivity was over 8. Controlled feeding of concentrated lactose suspension in the whey permeate (350 g l^–1) resulted in the continuous collection of 120–140 g l^–1 of ethanol pervaporate for 5 days, by which time salt accumulation hampered the fermentation. Medium refreshment restored the fermentative activity of the yeast cells and further extended the coupled process to over 9 days (200 h), when reversible membrane fouling occurred. The membrane module was exchanged and the combined process restarted. Correspondence to: Y. Shabtai     

Optimization of lactose utilization in deproteinated whey by Kluyveromyces marxianus using response surface methodology (RSM)

Kluyveromyces marxianus Y-8281 yeast culture was utilized for the biological treatment of deproteinated whey wastewater in a batch system. Removal of lactose was optimized by the utilization of response surface methodology, RSM. The empirical model developed through RSM in terms of effective operational factors of medium pH, temperature, lactose and ammonia concentrations was found adequate to describe the treatment of deproteinated whey. Through the analysis, medium pH and temperature were found to be the most significant factors and an increment in both had a positive effect on lactose utilization, while lactose and ammonia concentrations had the least weight within the ranges investigated. Based on contour plots and variance analysis, optimum operational conditions for maximizing lactose removal were found to be 31 degrees C, 45 g/L whey powder concentration, 4 g/L total ammonium salt concentration and medium pH 6. Under the optimum operating conditions determined, 95% lactose removal was achieved after an 18-h fermentation.     

Expression of exoinulinase genes in Saccharomyces cerevisiae to improve ethanol production from inulin sources

To improve inulin utilization and ethanol fermentation, exoinulinase genes from the yeast Kluyveromyces marxianus and the recently identified yeast, Candida kutaonensis, were expressed in Saccharomyces cerevisiae. S. cerevisiae harboring the exoinulinase gene from C. kutaonensis gave higher ethanol yield and productivity from both inulin (0.38 vs. 0.34 g/g and 1.35 vs. 1.22 g l^?1 h^?1) and Jerusalem artichoke tuber flour (0.47 vs. 0.46 g/g and 1.62 vs. 1.54 g l^?1 h^?1) compared with the strain expressing the exoinulinase gene from K. marxianus. Thus, the exoinulinase gene from C. kutaonensis is advantageous for engineering S. cerevisiae to improve ethanol fermentation from inulin sources.     

Integrated bioprocess for the simultaneous production of lactic acid and dairy sewage treatment

An integrated biological process was developed for the conversion of whey lactose to lactic acid. We report about the achievement of maximum COD reduction and thus a substantial unburdening of the environment, combined with the economic production of lactic acid, appropriate for industrial scale. The process – designed for continuous operation – consists of four main steps: (i) Protein recovery by ultrafiltration leading to the first product: protein concentrate. The resulting filtrate is the fermentation substrate acid whey permeate. (ii) Adjustment of the composition of the permeate in the medium preparation step in order to ensure the proper function of the following process steps. (iii) Conversion of the lactose to lactate by fermentation with lactic acid bacteria in a cell recycle reactor, using ceramic microfiltration membranes. (iiii) Conversion of the lactate in the cell-free permeate stream of the fermentation to free lactic acid by bipolar electrodialysis. A stable operation of the process was attained up to more than 2000?hours. Using a new selected strain of lactic acid bacteria, a lactic acid productivity of 17?g?l^?1?h^?1 is achieved at total lactose conversion without any nitrogen supplements like yeast extract. A lactic acid concentration of 190?g?l^?1 is obtained in the acidic cell of the electrodialysis unit and the COD of the remaining sewage is diminished by 92%. As an additional cost reduction item, the neutralization agent of the fermentation is recovered in the caustic cell of the bipolar electrodialysis unit. A cost evaluation for an industrial scale process (100?000?t of whey per year) resulted in a price of 0.66 $ per kg of lactic acid, which under present terms hits the goal of making this process economic for the large scale production of lactic acid as an attractive building block for various purposes in chemical industry.     

Lactic acid production from whey permeate by immobilized Lactobacillus casei

Two matrices have been assessed for their ability to immobilize Lactobacillus casei cells for lactic acid fermentation in whey permeate medium. Agar at 2% concentration was found to be a better gel than polyacrylamide in its effectiveness to entrap the bacterial cells to carry out batch fermentation up to three repeat runs. Of the various physiological parameters studied, temperature and pH were observed to have no significant influence on the fermentation ability of the immobilized organism. A temperature range of 40–50°C and a pH range of 4.5–6.0 rather than specific values, were found to be optimum when fermentation was carried out under stationary conditions. In batch fermentation ～90% conversion of the substrate (lactose) was achieved in 48 h using immobilized cell gel cubes of 4 × 2 × 2 mm size, containing 400 mg dry bacterial cells per flask and 4.5% w/v (initial) whey lactose content as substrate. However, further increase in substrate levels tested (>4.5% w/v) did not improve the process efficiency. Supplementation of Mg²⁺ (1 mM) and agricultural by-products (mustard oil cake, 6%) in the whey permeate medium further improved the acid production ability of the immobilized cells under study.     

Intergeneric yeast fusants with efficient ethanol production from cheese whey powder solution: Construction of a Kluyveromyces marxianus and Saccharomyces cerevisiae AY‐5 hybrid

Due to its high content of lactose and abundant availability, cheese whey powder (CWP) has received much attention for ethanol production in fermentation processes. However, lactose‐fermenting yeast strains including Kluyveromyces marxianus can only produce alcohol at a relatively low level, while the most commonly used distiller yeast strain Saccharomyces cerevisiae cannot ferment lactose since it lacks both β‐galactosidase and the lactose permease system. To combine the unique aspects of these two yeast strains, hybrids of K. marxianus TY‐22 and S. cerevisiae AY‐5 were constructed by protoplast fusion. The fusants were screened and characterized by DNA content, β‐galactosidase activity, ethanol tolerance, and ethanol productivity. Among the genetically stable fusants, the DNA content of strain R‐1 was 6.94%, close to the sum of the DNA contents of TY‐22 (3.99%) and AY‐5 (3.51%). The results obtained by random‐amplified polymorphic DNA analysis suggested that R‐1 was a fusant between AY‐5 and TY‐22. During the fermentation process with CWP, the hybrid strain R‐1 produced 3.8% v/v ethanol in 72 h, while the parental strain TY‐22 only produced 3.1% v/v ethanol in 84 h under the same conditions.     

Consolidated bioprocessing strategy for ethanol production from Jerusalem artichoke tubers by Kluyveromyces marxianus under high gravity conditions

Aims: Developing an innovative process for ethanol fermentation from Jerusalem artichoke tubers under very high gravity (VHG) conditions. Methods and Results: A consolidated bioprocessing (CBP) strategy that integrated inulinase production, saccharification of inulin contained in Jerusalem artichoke tubers and ethanol production from sugars released from inulin by the enzyme was developed with the inulinase‐producing yeast Kluyveromyces marxianus Y179 and fed‐batch operation. The impact of inoculum age, aeration, the supplementation of pectinase and nutrients on the ethanol fermentation performance of the CBP system was studied. Although inulinase activities increased with the extension of the seed incubation time, its contribution to ethanol production was negligible because vigorously growing yeast cells harvested earlier carried out ethanol fermentation more efficiently. Thus, the overnight incubation that has been practised in ethanol production from starch‐based feedstocks is recommended. Aeration facilitated the fermentation process, but compromised ethanol yield because of the negative Crabtree effect of the species, and increases the risk of contamination under industrial conditions. Therefore, nonaeration conditions are preferred for the CBP system. Pectinase supplementation reduced viscosity of the fermentation broth and improved ethanol production performance, particularly under high gravity conditions, but the enzyme cost should be carefully balanced. Medium optimization was performed, and ethanol concentration as high as 94·2 g l^?1 was achieved when 0·15 g l^?1 K₂HPO₄ was supplemented, which presents a significant progress in ethanol production from Jerusalem artichoke tubers. Conclusions: A CBP system using K. marxianus is suitable for efficient ethanol production from Jerusalem artichoke tubers under VHG conditions. Significance and Impact of the Study: Jerusalem artichoke tubers are an alternative to grain‐based feedstocks for ethanol production. The high ethanol concentration achieved using K. marxianus with the CBP system not only saves energy consumption for ethanol distillation, but also significantly reduces the amount of waste distillage discharged from the distillation system.