Ethanol production from pentoses by immobilized microorganisms

The capabilities of immobilized Fusarium oxysporum f. sp. lini, Mucor sp., and Saccharomyces cerevisiae in fermenting pentose to ethanol have been compared. S. cerevisiae was found to have the best fermentation rate on d-xylulose of 0.3 g l^?1 h^?1. By using a separate isomerase column for converting d-xylose to d-xylulose and a yeast column for converting d-xylulose to ethanol, an ethanol concentration of 32 g l^?1 was obtained from 10% d-xylose. The ethanol yield was calculated to be 64% of the theoretical yield.     

Fermentation of pretreated sugarcane bagasse hemicellulose hydrolysate to ethanol by <Emphasis Type="Italic">Pachysolen tannophilus</Emphasis>

Sugarcane bagasse hemicellulose hydrolysates, pretreated by either over-liming or electrodialysis and, supplemented with nutrient materials, were fermented to ethanol using Pachysolen tannophilus DW06. Compared with detoxification by over-liming, detoxification by electrodialysis decreased the loss of sugar and increased the acetic acid removal, leading to better fermentability. A batch culture with electrodialytically pretreated hydrolysate as substrate was developed giving 21 g ethanol l⁻¹ with a yield of 0.35 g g⁻¹ sugar and productivity of 0.59 g l⁻¹ h⁻¹.     

Ethanol production from pentoses and sugar-cane bagasse hemicellulose hydrolysate by Mucor and Fusarium species

The fermentation of carbohydrates and hemicellulose hydrolysate by Mucor and Fusarium species has been investigated, with the following results. Both Mucor and Fusarium species are able to ferment various sugars and alditols, including d-glucose, pentoses and xylitol, to ethanol. Mucor is able to ferment sugar-cane bagasse hemicellulose hydrolysate to ethanol. Fusarium F5 is not able to ferment sugar-cane bagasse hemicellulose hydrolysate to ethanol. During fermentation of hemicellulose hydrolysates, d-glucose was utilized first, followed by d-xylose and l-arabinose. Small amounts of xylitol were produced by Mucor from d-xylose through oxidoreduction reactions, presumably mediated by the enzyme aldose reductase¹ (alditol: NADP⁺ 1-oxidoreductase, EC 1.1.1.21). For pentose fermentation, d-xylose was the preferred substrate. Only small amounts of ethanol were produced from l-arabinose and d-arabitol. No ethanol was produced from l-xylose, d-arabinose or l-arabitol.     

Oxygen requirements for d-xylose fermentation to ethanol and polyols by Pachysolen tannophilus

The oxygen requirements for ethanol production from d-xylose (10 or 20 g l^?1) by Pachysolen tannophilus have been determined by controlling the availability of oxygen to shake flasks. Under anaerobic conditions no ethanol was produced whereas under aerobic conditions mainly biomass was formed. Semi-anaerobic conditions resulted in maximum ethanol production. By varying the stirring speed of a fermenter and supplying air to the liquid surface at various rates, the oxygen transfer rate (OTR) was controlled under semi-anaerobic conditions. By increasing the OTR from 0.05 to 16.04 mmol l^?1 h^?1, the ethanol yield coefficient decreased from 0.28 to 0.18 while the cell yield coefficient increased from 0.14 to 0.22. The accumulation of polyols decreased from 0.88 to 0.56 g l^?1 with increasing OTR. At OTRs between 0.09 and 1.18 mmol l^?1 h^?1, specific ethanol productivity attained a maximum value of 0.07 h^?1 and decreased with either increasing or decreasing OTR. The results indicate that the OTR must be carefully controlled for efficient ethanol production from d-xylose by P. tannophilus.     

Evaluation of ethanol production by a new isolate of yeast during fermentation in synthetic medium and sugarcane bagasse hemicellulosic hydrolysate

A new xylose fermenting yeast was isolated from over-ripe banana by enrichment in xylose-containing medium. The phylogenetic analysis of ITS1-5.8S-ITS2 region sequences of ribosomal RNA of isolate BY2 revealed that it shows affiliation to genus Pichia and clades with Pichia caribbica. In batch fermentation, Pichia strain BY2 fermented xylose, producing 15 g l^?1 ethanol from 30 g l^?1 xylose under shaking conditions at 28°C, with ethanol yield of 0.5 g g^?1 and volumetric productivity of 0.31 g l^?1 h^?1. The optimum pH range for ethanol production from xylose by Pichia strain BY2 was 5–7. Pichia strain BY2 also produced 6.08 g l^?1 ethanol from 30 g l^?1 arabinose. Pichia strain BY2 can utilize sugarcane bagasse hemicellulose acid hydrolysate for alcohol production, efficiency of fermentation was improved by neutralization, and sequential use of activated charcoal adsorption method. Percent total sugar utilized and ethanol yield for the untreated hydrolysate was 17.14% w/v and 0.33 g g^?1, respectively, compared with 66.79% w/v and 0.45 g g^?1, respectively, for treated hemicellulose acid hydrolysate. This new yeast isolate showed ethanol yield of 0.45 g g^?1 and volumetric productivity of 0.33 g l^?1 h^?1 from sugarcane bagasse hemicellulose hydrolysate detoxified by neutralization and activated charcoal treatment, and has potential application in practical process of ethanol production from lignocellulosic hydrolysate.     

The effect of aeration on xylose fermentation by Candida shehatae and Pachysolen tannophilus

Summary The ability of a Candida shehatae and a Pachysolen tannophilus strain to ferment D-xylose to ethanol was evaluated in defined and complex media under different levels of aeration. Aeration enhanced the ethanol productivity of both yeasts considerably. C. shehatae maintained a higher fermentation rate and ethanol yield than P. tannophilus over a wide range of aeration levels. Ethanol production by C. shehatae commenced during the early stage of the fermentation, whereas with P. tannophilus there was a considerable lag between the initiation of growth and ethanol production. Both yeasts produced appreciable quantities of xylitol late in the fermentation. P. tannophilus failed to grow under anoxic conditions, producing a maximum of only 0.5 g · l^-1 ethanol. In comparison, C. shehatae exhibited limited growth in anoxic cultures, and produced ethanol much more rapidly. Under the condition of aeration where C. shehatae exhibited the highest ethanol productivity, the fermentation parameters were: maximum specific growth rate, 0.15 h^-1; maximum volumetric and specific rates of ethanol production, 0.7 g (l · h)^-1 and 0.34 g ethanol (g cells · h)^-1 respectively; ethanol yield, 0.36 g (g xylose)^-1. The best values obtained with P. tannophilus were: maximum specific growth rate, 0.14 h^-1; maximum volumetric and specific rates of ethanol production, 0.22 g (l · h)^-1 and 0.07 h^-1 respectively; ethanol yield coefficient, 0.28. Because of its higher ethanol productivity at various levels of aeration, C. shehatae has a greater potential for ethanol production from xylose than P. tannophilus.     

The effect of hexose ratios on metabolite production in Saccharomyces cerevisiae strains obtained from the spontaneous fermentation of mezcal

Mezcal from Tamaulipas (México) is produced by spontaneous alcoholic fermentation using Agave spp. musts, which are rich in fructose. In this study eight Saccharomyces cerevisiae isolates obtained at the final stage of fermentation from a traditional mezcal winery were analysed in three semi-synthetic media. Medium M1 had a sugar content of 100 g l^?1 and a glucose/fructose (G/F) of 9:1. Medium M2 had a sugar content of 100 g l^?1 and a G/F of 1:9. Medium M3 had a sugar content of 200 g l^?1 and a G/F of 1:1. In the three types of media tested, the highest ethanol yield was obtained from the glucophilic strain LCBG-3Y5, while strain LCBG-3Y8 was highly resistant to ethanol and the most fructophilic of the mezcal strains. Strain LCBG-3Y5 produced more glycerol (4.4 g l^?1) and acetic acid (1 g l^?1) in M2 than in M1 (1.7 and 0.5 g l^?1, respectively), and the ethanol yields were higher for all strains in M1 except for LCBG-3Y5, -3Y8 and the Fermichamp strain. In medium M3, only the Fermichamp strain was able to fully consume the 100 g of fructose l^?1 but left a residual 32 g of glucose l^?1. Regarding the hexose transporters, a high number of amino acid polymorphisms were found in the Hxt1p sequences. Strain LCBG-3Y8 exhibited eight unique amino acid changes, followed by the Fermichamp strain with three changes. In Hxt3p, we observed nine amino acid polymorphisms unique for the Fermichamp strain and five unique changes for the mezcal strains.     

Treatment of dye (Remazol Blue) and heavy metals using yeast cells with the purpose of managing polluted textile wastewaters

The bioaccumulation of chromium(VI), nickel(II), copper(II), and reactive dye by the yeast Rhodotorula mucilaginosa has been investigated in media containing molasses as a carbon and energy source. Optimal pH values for the yeast cells to remove the pollutants were pH 4 for copper(II) and dye, pH 6 for chromium(VI) and dye, and pH 5 for nickel(II) and dye in media containing 50 mg l^?1 heavy metal and 50 mg l^?1 Remazol Blue. The maximum dye bioaccumulation was observed within 4–6 days and uptake yields varied from 93% to 97%. The highest copper(II) removal yields measured were 30.6% for 45.4 mg l^?1 and 32.4% for 95.9 mg l^?1 initial copper(II) concentrations. The nickel(II) removal yield was 45.5% for 22.3 mg l^?1, 38.0% for 34.7 mg l^?1, and 30.3% for 62.2 mg l^?1. Higher chromium(VI) removal yields were obtained, such as 94.5% for 49.2 mg l^?1 and 87.7% for 129.2 mg l^?1 initial chromium(VI) concentration. The maximum dye and heavy metal bioaccumulation yield was investigated in media with a constant dye (approximately 50 mg l^?1) and increasing heavy metal concentration. In the medium with 48.9–98.8 mg l^?1 copper(II) and constant dye concentration, the maximum copper(II) bioaccumulation was 27.7% and 27.9% whereas the maximum dye bioaccumulation was 96.1% and 95.3%. The maximum chromium(VI) bioaccumulation in the medium with dye was 95.2% and 80.3% at 48.2 and 102.2 mg l^?1 chromium(VI) concentrations. In these media dye bioaccumulation was 76.1% and 35.1%, respectively. The highest nickel(II) removal was 6.1%, 20.3% and 16.0% in the medium with 23.8 mg l^?1 nickel(II) + 37.8 mg l^?1 dye, 38.1 mg l^?1 nickel(II) + 33.4 mg l^?1 dye and 59.0 mg l^?1 nickel(II) + 39.2 mg l^?1 dye, respectively. The maximum dye bioaccumulation yield in the media with nickel(II) was 94.1%, 78.0% and 58.7%, respectively.     

By-product formation by a novel glycerol-producing yeast,Candida glycerinogenes,with different O2 supplies

Candida glycerinogenes is an aerobe which does not depend on sulphite for production of glycerol. With a sufficient O₂ supply, up to 130 g glycerol l^–1 was produced with 2.6 g acetic acid l^–1 as by-product. However, with an insufficient O₂ supply – with higher volumes of medium or at higher corn steep liquid concentrations – the glycerol concentration was lower because the by-products, ethanol, pyruvate and lactic acid, were produced in greater amounts, up to 45 g l^–1, 4.3 g l^–1, 1.6 g l^–1, respectively, whereas, less acetic acid (0.6 g l^–1) was produced. In addition, ethanol decreased to 0.4 g l^–1 and the glycerol yield improved from 34 to 50% (w/w) by adding 50 g sulphite l^–1, nevertheless, acetic acid increased to 7.8 g l^–1.     

Production of high ethanol concentrations from glucose using a vertical rotating immobilized cell reactor of the bacterium zymomonas mobilis

Long-term continuous ethanol production of up to 80 g.l¹ with a volumetric ethanol productivity of 63 g. l^?1. h^?1 was maintained for more than 72 days using a Vertical Rotating Immobilized Cell Reactor of the bacterium Z. mobilis. Continuous production of higher ethanol concentration was unsuccessful due to an inhibition of cell growth by long exposure to high ethanol concentrations. However, ethanol concentration as high as 120g. l^?1 and volumetric ethanol productivity of 13g. l^?1. h^?1 were achieved in a repeated-batch fermentation system using the same bioreactor. By a simple washing operation at the end of each run, immobilized biomass could be effectively regenerated and used to carry out more than 10 successive fermentation cycles.     

Acetic Acid Production by an Electrodialysis Fermentation Method with a Computerized Control System

In acetic acid fermentation by Acetobacter aceti, the acetic acid produced inhibits the production of acetic acid by this microorganism. To alleviate this inhibitory effect, we developed an electrodialysis fermentation method such that acetic acid is continuously removed from the broth. The fermentation unit has a computerized system for the control of the pH and the concentration of ethanol in the fermentation broth. The electrodialysis fermentation system resulted in improved cell growth and higher productivity over an extended period; the productivity exceeded that from non-pH-controlled fermentation. During electrodialysis fermentation in our system, 97.6 g of acetic acid was produced from 86.0 g of ethanol; the amount of acetic acid was about 2.4 times greater than that produced by non-pH-controlled fermentation (40.1 g of acetic acid produced from 33.8 g of ethanol). Maximum productivity of electrodialysis fermentation in our system was 2.13 g/h, a rate which was 1.35 times higher than that of non-pH-controlled fermentation (1.58 g/h).     

Production of ethanol from wood and agricultural residues by Neurospora crassa

The feasibility of utilizing the rapidly growing tropical woods for ethanol production by Neurospora crassa has been studied. Hydrolysis of cold alkali pretreated wood gave a saccharification of 68% based on the available carbohydrate. The direct fermentation of pretreated wood (20 g l^?1) by Neurospora crassa gave quantitative conversion of available hemicellulose/cellulose to ethanol in 5 days. Increasing the substrate concentration to 50 g l^?1lowered the conversion to 40–60% yielding 12 g l^?1of ethanol. Fermentation of wood (50 g l^?1) pretreated with hot 1 m NaOH followed by neutralization with HCl gave only 6 g l^?1of ethanol.     

Production of H2 from cellulose by rumen microorganisms: effects of inocula pre-treatment and enzymatic hydrolysis

H₂ production from cellulose, using rumen fluid as the inoculum, has been investigated in batch experiments. Methanogenic archaea were inhibited by acid pre-treatment, which also inhibited cellulolytic microorganisms, and in consequence, the conversion of cellulose to H₂. Positive results were observed only with the addition of cellulase. H₂ yields were 18.5 and 9.6 mmol H₂ g cellulose^?1 for reactors with 2 and 4 g cellulose l^?1 and cellulase, respectively. H₂ was primarily generated by the butyric acid pathway and this was followed by formation of acetic acid, ethanol and n-butanol. In reactors using 4 g cellulose l^?1 and cellulase, the accumulation of alcohols negatively affected the H₂ yield, which changed the fermentation pathways to solventogenesis. PCR–DGGE analysis showed changes in the microbial communities. The phylogenetic affiliations of the bands of DGGE were 99 % similar to Clostridium sp.     

Evaluation of xylitol production from corn cob hemicellulose hydrolysate by Candida parapsilosis

Candida parapsilosis was grown for 59 h in a medium containing corn cob hydrolysate consisting of 50 g xylose l^–1, 3.0 g glucose l^–1, 2.0 g arabinose l^–1, and 0.9 g acetic acid l^–1. A biomass of 9.1 g l^–1 was produced with 36 g xylitol l^–1 and 2.5 g ethanol l^–1. In a medium containing 50 g xylose l^–1 instead of corn cob hydrolysate, the concentrations of cells, xylitol, and ethanol were 8.6 g l^–1, 33 g l^–1, and 0.2 g l^–1, respectively. The differences between two cultures were due to the glucose and arabinose in the corn cob hydrolysate stimulating growth and the low concentration of acetic acid stimulating xylitol production.     

Metabolic,physiological and kinetic aspects of the alcoholic fermentation of whey permeate by Kluyveromyces fragilis NRRL 665 and Kluyveromyces lactis NCYC 571

Optimum growth conditions for the fermentation of non-concentrated whey permeate by Kluyveromyces fragilis NRRL 665 have been defined. Use of 3.75 g yeast extract l^?1, a growth temperature of 38°C and a pH of 4.0 allowed a maximum productivity of 5.23 g ethanol l^?1 h^?1 in continuous culture with a yield 91% of theoretical. Complete batch fermentation of permeate with 100 g lactose l^?1 was possible with a maximum specific growth rate of 0.276 h^?1 without any change in ethanol yield. Fermentation of concentrated permeate resulted, however, in a general decrease of specific substrate consumption rate, demonstrated by the inability to completely convert an initial 90 or 150 g lactose l^?1 in continuous culture, even at dilution rates as low as 0.05 and 0.08 h^?1, respectively. The decrease could be related to substrate inhibition, to an increase in osmotic pressure caused by lactose and salts, and to ethanol inhibition of both alcohol and biomass yield. The decrease in specific productivity could be counterbalanced by use of high cell density cultures, obtained by cell recycle of K. fragilis. Fermentation of a non-concentrated permeáte at a dilution rate of 1 h^?1 resulted in a productivity of 22 g l^?1 h^?1 at 22 g ethanol l^?1. Cell recycle using flocculating Kluyveromyces lactis NCYC 571 was also tested. With this strain a productivity of 9.3 g l^?1 h^?1 at 45 g product l^?1 was attained at a dilution rate of 0.2 h^?1, with an initial lactose concentration of 95 g l^?1.     

Butanol production from sweet sorghum bagasse with high solids content: Part I—comparison of liquid hot water pretreatment with dilute sulfuric acid

In these studies, we pretreated sweet sorghum bagasse (SSB) using liquid hot water (LHW) or dilute H₂SO₄ (2 g L^?1) at 190°C for zero min (as soon as temperature reached 190°C, cooling was started) to reduce generation of sugar degradation fermentation inhibiting products such as furfural and hydroxymethyl furfural (HMF). The solids loading were 250–300 g L^?1. This was followed by enzymatic hydrolysis. After hydrolysis, 89.0 g L^?1 sugars, 7.60 g L^?1 acetic acid, 0.33 g L^?1 furfural, and 0.07 g L^?1 HMF were released. This pretreatment and hydrolysis resulted in the release of 57.9% sugars. This was followed by second hydrolysis of the fibrous biomass which resulted in the release of 43.64 g L^?1 additional sugars, 2.40 g L^?1 acetic acid, zero g L^?1 furfural, and zero g L^?1 HMF. In both the hydrolyzates, 86.3% sugars present in SSB were released. Fermentation of the hydrolyzate I resulted in poor acetone‐butanol‐ethanol (ABE) fermentation. However, fermentation of the hydrolyzate II was successful and produced 13.43 g L^?1 ABE of which butanol was the main product. Use of 2 g L^?1 H₂SO₄ as a pretreatment medium followed by enzymatic hydrolysis resulted in the release of 100.6–93.8% (w/w) sugars from 250 to 300 g L^?1 SSB, respectively. LHW or dilute H₂SO₄ were used to economize production of cellulosic sugars from SSB. © 2018 American Institute of Chemical Engineers Biotechnol. Prog., 34:960–966, 2018     

CaCO<Subscript>3</Subscript> supplementation alleviates the inhibition of formic acid on acetone/butanol/ethanol fermentation by <Emphasis Type="Italic">Clostridium acetobutylicum</Emphasis>

Objective

To investigate the inhibiting effect of formic acid on acetone/butanol/ethanol (ABE) fermentation and explain the mechanism of the alleviation in the inhibiting effect under CaCO₃ supplementation condition.

Results

From the medium containing 50 g sugars l^?1 and 0.5 g formic acid l^?1, only 0.75 g ABE l^?1 was produced when pH was adjusted by KOH and fermentation ended prematurely before the transformation from acidogenesis to solventogenesis. In contrast, 11.4 g ABE l^?1 was produced when pH was adjusted by 4 g CaCO₃ l^?1. The beneficial effect can be ascribed to the buffering capacity of CaCO₃. Comparative analysis results showed that the undissociated formic acid concentration and acid production coupled with ATP and NADH was affected by the pH buffering capacity of CaCO₃. Four millimole undissociated formic acid was the threshold at which the transformation to solventogenesis occurred.

Conclusion

The inhibiting effect of formic acid on ABE fermentation can be alleviated by CaCO₃ supplementation due to its buffering capacity.

     

Evaluation of fermentative potential of <Emphasis Type="Italic">Kluyveromyces marxianus</Emphasis> ATCC 36907 in cellulosic and hemicellulosic sugarcane bagasse hydrolysates on xylitol and ethanol production

This paper evaluates the fermentative potential of Kluyveromyces marxianus grown in sugarcane bagasse cellulosic and hemicellulosic hydrolysates obtained by acid hydrolysis. Ethanol was obtained from a single glucose fermentation product, whereas xylose assimilation resulted in xylitol as the main product and ethanol as a by-product derived from the metabolism of this pentose. Fermentation performed in a simulated hydrolysate medium with a glucose concentration similar to that of the hydrolysate resulted in ethanol productivity (Qp?=?0.86 g L^?1 h^?1) that was tenfold higher than the one observed in the cellulosic hydrolysate. However, the use of hemicellulosic hydrolysate favored xylose assimilation in comparison with simulated medium with xylose and glucose concentrations similar to those found in this hydrolysate, without toxic compounds such as acetic acid and phenols. Under this condition, xylitol yield was 53.8 % higher in relation to simulated medium. Thus, the total removal of toxic compounds from the hydrolysate is not necessary to obtain bioproducts from lignocellulosic hydrolysates.     

Ethanol production from whey permeate by immobilized yeast cells

The ability of two yeast strains to utilize the lactose in whey permeate has been studied. Kluyveromyces marxianus NCYC 179 completely utilized the lactose (9.8%), whereas Saccharomyces cerevisiae NCYC 240 displayed an inability to metabolize whey lactose for ethanol production. Of the two gel matrices tested for immobilizing K. marxianus NCYC 179 cells, sodium alginate at 2% (w/v) concentration proved to be the optimum gel for entrapping the yeast cells effectively. The data on optimization of physiological conditions of fermentation (temperature, pH, ethanol concentration and substrate concentration) showed similar effects on immobilized and free cell suspensions of K. marxianus NCYC 179, in batch fermentation. A maximum yield of 42.6 g ethanol l^?1 (82% of theoretical) was obtained from 98 g lactose l^?1 when fermentation was carried at pH 5.5 and 30°C using 120 g dry weight l^?1 cell load of yeast cells. These results suggest that whey lactose can be metabolized effectively for ethanol production using immobilized K. marxianus NCYC 179 cells.     

The ethanol tolerance of Pichia stipitis Y 7124 grown on a d-xylose,d-glucose and l-arabinose mixture

The tolerance of Pichia stipitis Y 7124 to initial added ethanol was evaluated in anaerobic and microaerobic conditions, during the fermentation of a sugar mixture (d-glucose 20%, d-xylose 75%, l-arabinose 5%). The ethanol tolerance depends on the presence of oxygen. In microaerobiosis, the fermentative capacity of P. stipitis is not inhibited when the initial ethanol concentration does not exceed 20 g/l; in this added ethanol range, the strain produced ethanol with a yield up to 0.40 g/g and a specific rate of 0.1 g/g·h. An increase of the initial ethanol level decreases the rate of ethanol production but the ethanol yield appears to be less sensitive to ethanol inhibition. In anaerobiosis, maximum fermentative performances are obtained in the zero initial ethanol culture. When initial ethanol increases, growth and ethanol production decline gradually. But P. stipitis produces ethanol at an initial ethanol level of 50 g/l, even though this totally inhibits the strain activity in microaerobiosis.