Proximity of lectin receptors on the cell surface measured by fluorescence energy transfer in a flow system.

Molecules of the lectin concanavalin A have been labeled separately with the fluorescein and rhodamine chromophores and jointly bound to the surface of transformed Friend erythroleukemia cells. The two dyes constitute an ideal donor-acceptor pair for fluorescence resonance energy transfer thereby permitting the determination of the proximity relationships between bound ligand molecules and the corresponding surface receptors. The transfer efficiency at saturation (about 57%) was measured in a multiparameter flow system using laser excitation at 488 nm and detection of fluorescein and rhodamine emission intensities as well as the emission anisotropy of the rhodamine fluorescence for each cell. The degree of energy transfer was estimated from the quenching of donor emission, the sensitization of acceptor emission, and the depolarization of acceptor fluorescence. The system has been modeled according to a formalism developed by Gennis and Cantor (Biochemistry 11: 2509, 1972). We estimate the separation between the surfaces of bound lectin molecules at saturation to be 0-40 A, a range possibly characteristic for micropatches induced by ligand binding.     

Changes in the distribution of platelet membrane proteins revealed by energy transfer

The redistribution of platelet membrane proteins in response to platelet activation was studied. To investigate this process we prepared a variety of platelet ligands, including di- and tetrameric concanavalin A, IgG, thrombin, wheat-germ agglutinin and other lectins. These ligands were conjugated either with acceptor (rhodamine isothiocyanate) or donor (fluoresceine isothiocyanate) fluorophore. Platelets exposed to various combinations of ligand species were stimulated with different aggregating agents, and changes in sensitized fluorescence emission or donor quenching were recorded. Energy transfer was observed with thrombin, dimeric concanavalin A after addition of thrombin and various combinations of dimeric concanavalin A with other membrane ligands. The preincubation of platelets with colchicine prevented energy transfer between appropriate ligand pairs and platelet activator. Our studies show that nonradiative energy transfer can be used to analyze redistribution of membrane receptor sites in platelets.     

Na+-Ca2+ exchange in the axolemma-rich membrane vesicle preparations from the walking-leg nerves of the American lobster

The redistribution of platelet membrane proteins in response to platelet activation was studied. To investigate this process we prepared a variety of platelet ligands, including di- and tetrameric concanavalin A, IgG, thrombin, wheat-germ agglutinin and other lectins. These ligands were conjugated either with acceptor (rhodamine isothiocyanate) or donor (fluoresceine isothiocyanate) fluorophore. Platelets exposed to various combinations of ligand species were stimulated with different aggregating agents, and changes in sensitized fluorescence emission or donor quenching were recorded. Energy transfer was observed with thrombin, dimeric concanavalin A after addition of thrombin and various combinations of dimeric concanavalin A with other membrane ligands. The preincubation of platelets with colchicine prevented energy transfer between appropriate ligand pairs and platelet activator. Our studies show that nonradiative energy transfer can be used to analyze redistribution of membrane receptor sites in platelets.     

New intramolecularly quenched fluorogenic peptide substrates for the study of the kinetic specificity of papain.

A series of new substrates for determining the catalytic activity of cysteine proteinases is described. The rate of hydrolysis by papain was monitored by a fluorescence continuous assay based on internal resonance energy transfer using 5-[(2-aminoethyl)amino]naphtalene-1-sulfonic acid (EDANS) and 4-(4-dimethylaminophenylazo)benzoic acid (DABCYL) as fluorescent donor and quenching acceptor, respectively, in peptides with the general structure: DABCYL-Lys-Phe-Gly-Xxx-Ala-Ala-EDANS. The substrates were used to evaluate the effect of amino acid structure in the S1' position on the kinetic parameters for papain catalyzed hydrolysis.     

Basic Principles of Fluorescence and Energy Transfer Applied to Real-Time PCR

Fluorescence is highly sensitive to environment, and the distance separating fluorophores and quencher molecules can provide the basis for effective homogeneous nucleic acid hybridization assays. Molecular interactions leading to fluorescence quenching include collisions, ground state and excited state complex formation, and long-range dipole-coupled energy transfer. These processes are well understood and equations are provided for estimating the effects of each process on fluorescence intensity. Estimates for the fluorescein-tetramethylrhodamine donor–acceptor pair reveal the relative contributions of dipole-coupled energy transfer, collisional quenching, and static quenching in several common assay formats, and illustrate that the degree of quenching is dependent upon the hybridization complex formed and the manner of label attachment.     

Single-label time-resolved luminescence assay for estrogen receptor--ligand binding

Homogeneous luminescence-based microplate assays are desirable in high-throughput screening of new nuclear receptor regulators. Time-resolved fluorescence resonance energy transfer (TR–FRET) assays provide high sensitivity due to low background signal. The TR–FRET concept requires labeling of both ligand and receptor, making the assay format and its development relatively expensive and complex compared with single-label methods. To overcome the limitations of the multilabel methods, we have developed a single-label method for estrogen receptor (ER)–ligand binding based on quenching resonance energy transfer (QRET), where estradiol labeled with luminescent europium(III) chelate (Eu–E₂) is quenched using soluble quencher molecules. The luminescence signal of Eu–E₂ on binding to full-length ER is protected from quenching while increasing competitor concentrations displace Eu–E₂ from the receptor, reducing the signal. The QRET method was paralleled with a commercial fluorescence polarization (FP) assay. The measured signal-to-background (S/B) values for estradiol, estrone, fulvestrant, and tamoxifen obtained for the QRET assay (5.8–9.2) were clearly higher than the S/B values for the FP assay (1.3–1.5). A K_d value of 30 nM was calculated for binding of Eu–E₂ to ER from a saturation binding isotherm. The QRET method provides an attractive new single-label assay format for nuclear receptor ligand screening.     

Luminescence studies of saccharide binding to wheat germ agglutinin (lectin).

The fluorescence and phosphorescence emission of wheat germ agglutinin are reported. Fluorescent tryptophan residues of wheat germ agglutinin are found highly exposed to solvent: fluorescence quenching induced by temperature fits with a single Arrhenius critical energy close to that of tryptophan in solution; the whole fluorescence emission is susceptible to iodide ion quenching and data reveal the homogeneity of fluorescence arising from only one type of tryptophan exposition. Energy transfers are analyzed at singlet and triplet state level. Tyrosine fluorescence at 25 degrees C is very weak. Results obtained from the relative excitation fluorescence quantum yield and from intrinsic fluorescence polarization show that a large amount of energy absorbed by tyrosine at 280 nm is transferred to tryptophan residues. However, tyrosine fluorescence is highly increased at 70 degrees C although disulfide bridges are not reduced. The phosphorescence spectrum at 77 K in 50% ethylene glycol is finely structured with several resolved vibrational bands at 405, 432 and 455 nm. Phosphorescence decay can be fitted with a single exponential. Lifetime is independent of excitation wave-length. Its value is very close to that of free tryptophan. Influence of tri-N-acetyl-chitotriose binding on luminescence properties are investigated. Results are analyzed in terms of steric tryptophan-ligand relationships. It is shown that all the fluorescent chromophores are concerned by the ligand binding but all fluorescence emission is still susceptible to iodide ion quenching. There is no change induced in energy transfer at the singlet state level and no modification in triplet state population.     

Fluorescence studies of endothelin-1

Fluorescence measurements and singlet singlet energy transfer experiments on endothelin-1 provide information on the conformation of this peptide in dilute aqueous solution. The tyrosine fluorescence quantum yield in the absence of transfer (in [Phe²¹]endothelin-1) is relatively large (Φ_tyr = 0.39), indicating the side-chain is oriented away from fluorescence quenching groups such as the two disulfide bonds of the peptide. The fluorescence emission maximum (λ = 351 nm) and quantum yield (Φ_trp = 0.099) of tryptophan in endothelin-I suggests that this residue is fully accessible to the solvent and that the indole ring is not located near the fluorescence quenching histidinium moiety or the disulfide bonds.

Singlet-singlet fluorescence energy transfer measurements of the Tyr¹³/Trp²¹ intramolecular distance by both donor fluorescence quenching and relative enhancement of acceptor fluorescence yield a distance of about 12.8 ± 0.6 Å. Molecular modeling of a fully extended C-terminal hexapeptide indicates a Tyr¹³/Trp²¹ distance of about 25 Å. Thus, the C-terminal residues must bend back towards the bicyclic portion of the molecule.     

Pulse fluorimetry study of energy transfers between tryptophan residues and NADPH in beef liver glutamate dehydrogenase complexes.

A method is proposed to determine the rates of singlet energy transfers in an array of chromophores containing a finite number of donors and fluorescent acceptors. This method is based on measurements of transfer efficiency coupled with pulse fluorimetry. Three classes of donors can be distinguished which differ in their energy transfer rate. The rates of the first, the second and the third class are respectively greater than, of the order of, and smaller than the emission rate. The method is applied to the study of the energy transfers from tryptophan residues to NADPH, in ternary and quaternary glutamate dehydrogenase complexes. Practically, all these tryptophan residues belong to the first class. They can be divided into two subclasses having different transfer rate values. The distance between these residues and the NADPH site are of the order of 2.5 nm. In addition, the ligand binding induces a protein conformation change, leading to a fluorescence quenching of the tryptophanyl emission.     

Pulse fluorimetry study of energy transfers between tryptophan residues and NADPH in beef liver glutamate dehydrogenase complexes

A method is proposed to determine the rates of singlet energy transfers in an array of chromophores containing a finite number of donors and fluorescent acceptors. This method is based on measurements of transfer efficiency coupled with pulse fluorimetry. Three classes of donors can be distinguished which differ in their energy transfer rate. The rates of the first, the second and the third class are respectively greater than, of the order of, and smaller than the emission rate. The method is applied to the study of the energy transfers from tryptophan residues to NADPH, in ternary and quaternary glutamate dehydrogenase complexes. Practically, all these tryptophan residues belong to the first class. They can be divided into two subclasses having different transfer rate values. The distances between these residues and the NADPH site are of the order of 2.5 nm. In addition, the ligand binding induces a protein conformational change, leading to a fluorescence quenching of the tryptophanyl emission.     

Intramolecular migration of excitation energy in poly-DL-phenylalanine. Study by fluorescence extinction

Electronic energy transfer at the singlet level in poly-DL -phenylalanine was studied by comparing the experimental and theoretical values of the rate constants of fluorescence quenching by CCl₄ and of energy transfer on a fluorescent acceptor (biacetyl). The fitting of the experimental and calculated values leads to a diffusion coefficient of the excitation energy of 3.8 to 4.8 × 10^?5 cm²/s, consistent with 40 residues implied in the migration process.     

Energy transfer in lipid bilayers.

The quenching of fluorescence due to energy transfer between a dilute, random array of donor and acceptor chromophores in lipid bilayer was measured and compared to theoretical expressions developed to predict the decrease in emission intensity under these circumstances. The observed intensity was found to be the same function of quencher concentration in both planar, multilamellar dispersions and small, spherical vesicles. The degree of quenching was accurately predicted by a simple relation derived in this paper, as well as a more complex equation previously developed by Tweet, et al. The results suggest that significant quenching may be observed even when the average donor-acceptor separation exceeds the F?rster critical distance by severalfold. Application of these results to problems of current interest in membrane research are discussed.     

Structural changes of yellow Cameleon domains observed by quantitative FRET analysis and polarized fluorescence correlation spectroscopy

Förster resonance energy transfer (FRET) is a widely used method for monitoring interactions between or within biological macromolecules conjugated with suitable donor-acceptor pairs. Donor fluorescence lifetimes in absence and presence of acceptor molecules are often measured for the observation of FRET. However, these lifetimes may originate from interacting and noninteracting molecules, which hampers quantitative interpretation of FRET data. We describe a methodology for the detection of FRET that monitors the rise time of acceptor fluorescence on donor excitation thereby detecting only those molecules undergoing FRET. The large advantage of this method, as compared to donor fluorescence quenching method used more commonly, is that the transfer rate of FRET can be determined accurately even in cases where the FRET efficiencies approach 100% yielding highly quenched donor fluorescence. Subsequently, the relative orientation between donor and acceptor chromophores is obtained from time-dependent fluorescence anisotropy measurements carried out under identical conditions of donor excitation and acceptor detection. The FRET based calcium sensor Yellow Cameleon 3.60 (YC3.60) was used because it changes its conformation on calcium binding, thereby increasing the FRET efficiency. After mapping distances and orientation angles between the FRET moieties in YC3.60, cartoon models of this FRET sensor with and without calcium could be created. Independent support for these representations came from experiments where the hydrodynamic properties of YC3.60 under ensemble and single-molecule conditions on selective excitation of the acceptor were determined. From rotational diffusion times as found by fluorescence correlation spectroscopy and consistently by fluorescence anisotropy decay analysis it could be concluded that the open structure (without calcium) is flexible as opposed to the rather rigid closed conformation. The combination of two independent methods gives consistent results and presents a rapid and specific methodology to analyze structural and dynamical changes in a protein on ligand binding.     

Quantitation of fluorescence energy transfer between cell surface proteins via fluorescence donor photobleaching kinetics.

We describe practical aspects of photobleaching fluorescence energy transfer measurements on individual living cells. The method introduced by T. M. Jovin and co-workers (see, most recently, Kubitscheck et al. 1993. Biophys. J. 64:110) is based on the reduced rate of irreversible photobleaching of donor fluorophores when acceptor fluorophores are present. Measuring differences in donor photobleaching rates on cells labeled with donor only (fluorescein isothiocyanate-conjugated proteins) and with both donor and acceptor (tetramethylrhodamine-conjugated proteins) allows calculation of the fluorescence energy transfer efficiency. We assess possible methods of data analysis in light of the underlying processes of photobleaching and energy transfer and suggest optimum strategies for this purpose. Single murine B lymphocytes binding various ratios of donor and acceptor conjugates of tetravalent concanavalin A (Con A) and divalent succinyl Con A were examined for interlectin energy transfer by these methods. For Con A, a maximum transfer efficiency of 0.49 +/- 0.02 was observed. Under similar conditions flow cytometric measurements of donor quenching yielded a value of 0.54 +/- 0.03. For succinyl Con A, the maximum transfer efficiency was 0.36. To provide concrete examples of quantities arising in such energy transfer determinations, we present examples of individual cell data and kinetic analyses, population rate constant distributions, and error estimates for the various quantities involved.     

Interactions of plasmalogens and their diacyl analogs with singlet oxygen in selected model systems

Plasmalogens are phospholipids containing a vinyl-ether linkage at the sn-1 position of the glycerophospholipid backbone. Despite being quite abundant in humans, the biological role of plasmalogens remains speculative. It has been postulated that plasmalogens are physiological antioxidants with the vinyl-ether functionality serving as a sacrificial trap for free radicals and singlet oxygen. However, no quantitative data on the efficiency of plasmalogens at scavenging these reactive species are available. In this study, rate constants of quenching of singlet oxygen, generated by photosensitized energy transfer, by several plasmalogens and, for comparison, by their diacyl analogs were determined by time-resolved detection of phosphorescence at 1270nm. Relative rates of the interactions of singlet oxygen with plasmalogens and other lipids, in solution and in liposomal membranes, were measured by electron paramagnetic resonance oximetry and product analysis using HPLC-EC detection of cholesterol hydroperoxides and iodometric assay of lipid hydroperoxides. The results show that singlet oxygen interacts with plasmalogens significantly faster than with the other lipids, with the corresponding rate constants being 1 to 2 orders of magnitude greater. The quenching of singlet oxygen by plasmalogens is mostly reactive in nature and results from its preferential interaction with the vinyl-ether bond. The data suggest that plasmalogens could protect unsaturated membrane lipids against oxidation induced by singlet oxygen, providing that the oxidation products are not excessively cytotoxic.     

Mapping the antagonist binding site of the serotonin type 3 receptor by fluorescence resonance energy transfer

We have measured fluorescence resonance energy transfer (FRET) between a fluorescent antagonist, bound to the purified detergent-solubilized serotonin type 3 receptor, and a lipophilic acceptor probe partitioned into the micelle surrounding the detergent-solubilized receptor. The experimentally observed FRET efficiency was evaluated on the basis of the characteristic dimensions of the receptor-micelle complex and the average number of acceptor molecules in such micelles. The binding site was determined to be 5.4 +/- 0.9 nm above the center of the detergent micelle. The experiments were performed below the critical micellar concentration of the detergent (C(12)E(9)) used to solubilize the receptor, under which conditions it was demonstrated that the ligand binding activity was fully preserved. This reduces considerably the fluorescence background arising from probes not associated with the receptor, allowing a precise determination of the transfer efficiency.     

Chemiluminescence and energy transfer mechanism of lanthanide ions in different media based on peroxomonosulfate system

The chemiluminescence (CL) phenomena of lanthanide (Ln) ions and their coordinate complexes in peroxomonosulfate system and the energy transfer mechanism during the process were investigated in this work. A strong and sharp CL signal was yielded when the Eu(III) or Tb(III) solution was added to the peroxymonosulfate solution. The CL intensity was greatly enhanced by 2,6‐pyridinedicarboxylic acid (DPA) ligand [maximum enhancement reached when Ln(III):DPA was 1:1] and hexadecyltrimethylammonium chloride micelles. The degree of enhancement of DPA and micelles on Ln(III) CL was related to the fluorescence lifetimes of Ln(III) in different media. According to the ESR spin‐trapping experiments of 2,2,6,6‐tetramethyl‐4‐piperidone and the specific quenching experiments of 1,4‐diazabicyclo[2.2.2]octane and sodium azide, singlet oxygen was generated though the Ln(III) ion‐catalyzed decomposition of peroxymonosulfate. From the comparisons of the fluorescence and CL spectra, lanthanide ions were the luminescence emitter and the ligand DPA absorbed the energy from singlet oxygen and transferred it to Ln(III) ions in the coordinate complexes. Micelles can enhance the CL intensity by improving intermolecular energy transfer efficiencies, removing the quenching effect of water and prolonging the lifetime of singlet oxygen. Copyright © 2009 John Wiley & Sons, Ltd.     

Single-molecule spectroscopy selectively probes donor and acceptor chromophores in the phycobiliprotein allophycocyanin

We report on single-molecule fluorescence measurements performed on the phycobiliprotein allophycocyanin (APC). Our data support the presence of a unidirectional F?rster-type energy transfer process involving spectrally different chromophores, alpha84 (donor) and beta84 (acceptor), as well as of energy hopping amongst beta84 chromophores. Single-molecule fluorescence spectra recorded from individual immobilized APC proteins indicate the presence of a red-emitting chromophore with emission peaking at 660 nm, which we connect with beta84, and a species with the emission peak blue shifted at 630 nm, which we attribute to alpha84. Polarization data from single APC trimers point to the presence of three consecutive red emitters, suggesting energy hopping amongst beta84 chromophores. Based on the single-molecule fluorescence spectra and assuming that emission at the ensemble level in solution comes mainly from the acceptor chromophore, we were able to resolve the individual absorption and emission spectra of the alpha84 and beta84 chromophores in APC.     

Interaction of colchicine with human serum albumin investigated by spectroscopic methods

We investigated the interaction between colchicine and human serum albumin (HSA) by fluorescence and UV-vis absorption spectroscopy. In the mechanism discussion, it was proved that the fluorescence quenching of HSA by colchicine is a result of the formation of colchicines-HSA complex; van der Waals interactions and hydrogen bonds play a major role in stabilizing the complex. The modified Stern-Volmer quenching constant K(a) and corresponding thermodynamic parameters deltaH, deltaG, deltaS at different temperatures were calculated. The distance r between donor (Trp214) and acceptor (colchicine) was obtained according to fluorescence resonance energy transfer (FRET).     

Synthesis, optical properties and singlet oxygen generation of a phthalocyanine derivative containing strong two-photon-absorbing chromophores in the periphery

A phthalocyanine derivative containing two-photon chromophores which are based on pyrimidine was designed and synthesized. Its light-emission property was studied in detail, and a strong energy transfer from peripheral chromophores to the phthalocyanine core was observed. The compound exhibited strong two-photon absorption responses with a two-photon absorption cross-section up to 1153 GM when irradiated with a picosecond laser in the wavelength range of 800-870 nm, and gave good singlet oxygen generation.