Improvement of astaxanthin production by a newly isolated Phaffia rhodozyma mutant with low-energy ion beam implantation

Aims: Isolation, characterization and identification of Phaffia sp. ZJB 00010, and improvement of astaxanthin production with low‐energy ion beam implantation. Methods and Results: A strain of ZJB 00010, capable of producing astaxanthin, was isolated and identified as Phaffia rhodozyma, based on its physiological and biochemical characteristics as well as its internal transcribed spacer (ITS) rDNA gene sequence analysis. With low‐energy ion beam implantation, this wild‐type strain was bred for improving the yield of astaxanthin. After ion beam implantation, the best mutant, E5042, was obtained. The production of astaxanthin in E5042 was 2512 μg g^?1 (dry cell weight, DCW), while the wild‐type strain was about 1114 μg g^?1 (DCW), an increase of 125·5%. Moreover, the fermentation conditions of mutant E5042 for producing astaxanthin were optimized. The astaxanthin production under the optimized conditions was upscaled and studied in a 50‐l fermentor. Conclusions: A genetically stable mutant strain with high yield of astaxanthin was obtained using low‐energy ion beam implantation. This mutant may be a suitable candidate for the industrial‐scale production of astaxanthin. Significance and Impact of the Study: Astaxanthin production in Phaffia rhodozyma could be fficiently improved by low‐energy ion beam implantation, which is a new technology in the mutant breeding of micro‐organisms. The mutant obtained in this work could potentially be utilized in industrial production of astaxanthin.     

Improvement of 1,3-dihydroxyacetone production from Gluconobacter oxydans by ion beam implantation

Improvement of dihydroxyacetone (DHA) production by mutagenesis of ion beam implantation and medium optimization using response-surface methodology (RSM) were investigated in this work. More than 1000 mutant strains were selected through a mutagenesis method using N(+) ions implantation with a dose of 60?×?(2.6?×?10(13)) ions/cm(2) and energy of 10?keV. Several high-yield mutant strains were showed the potent application for DHA production and the genetically stable mutant strain G. oxydans ZJB09113 was selected for optimization of cultivation condition by RSM. The optimal medium for DHA fermentation is composed (in g/L) of yeast extract 4.88, CaCO(3) 2.00, and glycerol 52.86?mL/L (initial pH 4.89). The maximal DHA concentration of 40.0?g/L was achieved after 24?hr of shaken flask fermentation at 30°C with 150?rpm, and 196.3% increase in DHA production in comparison with unoptimized conditions.     

The effects of N+ ion implantation mutagenesis on the laccase production of Ceriporiopsis subvermispora

In order to obtain genetically stable, high-yield, laccase-producing strains, Ceriporiopsis subvermispora was induced by N⁺ ion implantation and subcultured. The results revealed that, with energy of 30 keV and a dose of 80×10¹⁴ ions/cm², a relatively high increase in mutations and positive mutations were achieved. Three screened high-yield strains (NL3, NL4, and NL6) were obtained and subcultured. The results of the comparison showed that, NL4 had stable genetic traits and the highest laccase activity (323 U/L). In the course of fermentation, NL4 entered a vigorous growth period 24 h ahead of the original strain, and produced a large amount of laccase during the stationary phase. Up until the sixth day of fermentation achieved the highest laccase activity of 377 U/L, and a corresponding biomass dry weight of 4.2 mg/mL. The relative laccase activity of the per gram dry cells was 89.76 U, which was 4.79 times that of the original strain. The results indicated that N⁺ ion implantation was an ideal technique for microbial breeding, which could be applied for the improvement of Ceriporiopsis subvermispora.     

低能离子束诱变选育阿魏菇多糖高产菌株

利用低能离子注入,对阿魏菇菌丝体细胞采用在15Kev的注入能量下注入不同的剂量,经斜面培养,液体发酵后,通过初筛、复筛后,确定了最佳注入剂量9×1014N+/cm2.并筛选出一株多糖高产菌株GC-1.其多糖含量较对照提高了35%.     

Mutation breeding of chitosanase-producing strain Bacillus sp. S65 by low-energy ion implantation

In order to obtain an industrial strain with higher chitosanase yield, the wild strain Bacillus sp. S65 cells were mutated by a novel mutagen, nitrogen ion beam, with energy of 15 keV and dose ranging from 2.6 × 10¹⁴ to 5.2 × 10¹⁵ ions/cm². One mutant, s65F5 with high yield of chitosanase was isolated. Results showed that the production of chitosanase of s65F5 was dramatically increased from 4.1 U/ml in s65 to 25 U/ml by ion beam implantation, while the fermentation time was shortened from 72 to 56 h, both of which greatly increased efficiency and reduced the cost of industrial production. Besides, the mutagenic effects of low-energy ion beam on survival rate showed characteristic down–up–down pattern, which was different from the traditional mutagens such as UV and γ-ray and the possible mutation mechanism was discussed.     

Detection of changes in DNA methylation induced by low-energy ion implantation in Arabidopsis thaliana

This study evaluated changes in DNA methylation in Arabidopsis thaliana plants grown from seeds implanted with low-energy N(+) and Ar(+) ions. Methylation-sensitive amplified polymorphism (MSAP) testing revealed altered DNA methylation patterns after ion implantation at doses of 1 × 10(14) to 1 × 10(16) ions/cm(2). Comparison of the MSAP electrophoretic profiles revealed nine types of polymorphisms in ion-implanted seedlings relative to control seedlings, among which four represented methylation events, three represented demethylation events, and the methylation status of two was uncertain. The diversity of plant DNA methylation was increased by low-energy ion implantation. At the same time, total genomic DNA methylation levels at CCGG sites were unchanged by ion implantation. Moreover, a comparison of polymorphisms seen in N(+) ion-implanted, Ar(+) ion-implanted, and control DNA demonstrated that the species of incident ion influenced the resulting DNA methylation pattern. Sequencing of eight isolated fragments that showed different changing patterns in implanted plants allowed their mapping onto variable regions on one or more of the five Arabidopsis chromosomes; these segments included protein-coding genes, transposon and repeat DNA sequence. A further sodium bisulfite sequencing of three fragments also displayed alterations in methylation among either different types or doses of incident ions. Possible causes for the changes in methylation are discussed.     

The point mutation induced by the low-energy N+ ion implantation in Impatiens balsamine genome

To investigate the effect of genome mutations induced by low energy ions implantation in higher plants, genome mutation of Impatiens balsamine mutant induced by low energy N⁺ ion implantation were analyzed by the RAPD, ISSR and genome sequence. Six out of the 121 ISSR primers and 6 out of the 135 RAPD primers showed that polymorphism ratios between mutants and wild type were 4.96% and 2.89%, respectively. Sequence analysis revealed that base deletions, insertions, and substitutions were observed in the mutant genome comparable to wild type. N+ induced point mutations were mostly base substitution (77.4%), no duplication, long fragments insertions and deletions was found. In all point mutation, adenine (A) was most sensitive to the N⁺ ion implantation in impatiens. The transition was mainly A ?? guanine (G) (15.90%) and thymine (T) cytosine (C) (12.55%). Transversion happened in A ? T (16.74%), which much higher than C ? G (5.02%), G ? T (6.69%), A ? C (7.11%) bases. These findings indicate that low energy ions being a useful mutagen were mostly cause the point mutation in impatiens.     

Improvement of laccase production from Ganoderma sp. KU-Alk4 by medium engineering

To engineer the production of laccase by Ganoderma sp. KU-Alk4, a newly isolated white-rot fungus, a seven-level Box−Behnken factorial design was employed to optimize the culture medium composition. A mathematical model was developed to show the effect of each medium component and their interactions on the production of laccase activity in submerged fermentation. The model estimated the optimal concentrations of glycerol, yeast extract and veratryl alcohol as 40, 0.22 g/l and 0.85 mM, respectively, with the medium pH of 6.0. These predicted conditions were verified by validation experiments. The optimized medium gave laccase activity of 240 U/ml, which is 12 times higher than that produced in non-optimized medium. Thus, this statistical approach enabled rapid identification and integration of key medium parameters for Ganoderma sp. KU-Alk4, resulted the high laccase production.     

金属框架结构材料MOF-199对漆酶的固定化及其性质

以金属框架结构材料MOF-199为载体对漆酶进行固定化,并对固定化酶的性质进行初步研究。首先,以3-氨基丙基三乙氧基硅烷对载体MOF-199进行表面氨基化修饰,再用戊二醛对载体进行活化,最后对漆酶进行固定化。固定化条件优化结果表明:在漆酶质量浓度0.3 g/L,戊二醛用量1%(体积分数),pH 4.8下固定7 h,制得固定化酶活性最高。对固定化酶的研究发现:最适反应温度为40℃,最适pH为5.2,在连续操作7次后,固定化酶的活力仍能保持在51%。固定化漆酶热稳定性,pH耐受性,贮存稳定性均明显高于游离漆酶。     

Heterologous laccase production and its role in industrial applications

Laccases are blue multicopper oxidases, catalyzing the oxidation of an array of aromatic substrates concomitantly with the reduction of molecular oxygen to water. These enzymes are implicated in a variety of biological activities. Most of the laccases studied thus far are of fungal origin. The large range of substrates oxidized by laccases has raised interest in using them within different industrial fields, such as pulp delignification, textile dye bleaching, and bioremediation. Laccases secreted from native sources are usually not suitable for large-scale purposes, mainly due to low production yields and high cost of preparation/purification procedures. Heterologous expression may provide higher enzyme yields and may permit to produce laccases with desired properties (such as different substrate specificities, or improved stabilities) for industrial applications. This review surveys researches on heterologous laccase expression focusing on the pivotal role played by recombinant systems towards the development of robust tools for greening modern industry.     

Biological effects of low-energy C ion implantation on sesame (Sesamum indicum L.)

Field cultivation experiments on white sesame (Sesamum indicum L.)seeds implanted with low-energy C ion showed that different dosages of C ion implantation produce different biological effects.Sesame plants in 6 different dosage groups with C ion density respectively at 1×1011,1×1012,1×1015,5×1015,1×1016,5×1016 ion/cm2 were superior to the control group in plant height,leaf number,stalk diameter and leaf size.Further,sesame plants in these groups flower and seed earlier than those in the control group,and single plant yield also increased.Of all the groups,the 5×1015 ion/cm2 dosage group yielded the best effect,whereas the 1×1017/cm2 dosage group showed an evident inhibitory effect of ion implantation on the germination and growth of the sesame seeds.     

Modeling of growth and laccase production by Pycnoporus sanguineus

Production of extracellular laccase by the white-rot fungus Pycnoporus sanguineus was examined in batch submerged cultures in shake flasks, baffled shake flasks and a stirred tank bioreactor. The biomass growth in the various culture systems closely followed a logistic growth model. The production of laccase followed a Luedeking-Piret model. A modified Luedeking-Piret model incorporating logistic growth effectively described the consumption of glucose. Biomass productivity, enzyme productivity and substrate consumption were enhanced in baffled shake flasks relative to the cases for the conventional shake flasks. This was associated with improved oxygen transfer in the presence of the baffles. The best results were obtained in the stirred tank bioreactor. At 28 °C, pH 4.5, an agitation speed of 600 rpm and a dissolved oxygen concentration of ~25 % of air saturation, the laccase productivity in the bioreactor exceeded 19 U L^?1 days^?1, or 1.5-fold better than the best case for the baffled shake flask. The final concentration of the enzyme was about 325 U L^?1.     

Biological effects of low-energy C ion implantation on sesame ( Sesamum indicum L.)

Field cultivation experiments on white sesame (Sesamum indicum L.) seeds implanted with low-energy C ion showed that different dosages of C ion implantation produce different biological effects. Sesame plants in 6 different dosage groups with C ion density respectively at 1 × 10¹¹, 1 × 10¹², 1 × 10¹⁵, 5 × 10¹⁵, 1 × 10¹⁶, 5 × 10¹⁶ ion/cm² were superior to the control group in plant height, leaf number, stalk diameter and leaf size. Further, sesame plants in these groups flower and seed earlier than those in the control group, and single plant yield also increased. Of all the groups, the 5 × 10¹⁵ ion/cm² dosage group yielded the best effect, whereas the 1 × 10¹⁷/cm² dosage group showed an evident inhibitory effect of ion implantation on the germination and growth of the sesame seeds. __________ Translated from Journal of Beijing Normal University (Natural Science), 2006, 42 (1): 95–97 [译自: 北京师范大学学报 (自然科学版)]     

Reactivation of a silenced minimal Mutator transposable element system following low-energy nitrogen ion implantation in maize

In maize, Mutator transposable elements are either active or silenced within the genome. In response to environmental stress, silenced Mutator elements could be reactivated, leading to changes in genome structure and gene function. However, there is no direct experimental evidence linking environmental stress and Mutator transposon reactivation. Using a maize line that contains a single inactive MuDR and a lone nonautonomous Mutator element, a Mu1 insertion in the recessive reporter allele a1-mum2 in an inactive Mutator background, we directly assessed Mutator reactivation following low-energy nitrogen ion implantation. We observed that N⁺ implantation decreased cytosine methylation in MuDR terminal inverted repeats and increased expression of mudrA and mudrB. Both changes were associated with increased transpositional activity of MuDR through reactivation of the inactive minimal Mutator transposable element system. This study provides direct evidence linking environmental stress agents and Mutator transposon mobilization in maize. In addition, the observed changes to DNA methylation suggest a new mechanism for mutations by low-energy ion implantation.     

Enhancement of laccase production by Pleurotus ostreatus and its use for the decolorization of anthraquinone dye

The white-rot fungus Pleurotus ostreatus strain 32 is an excellent producer of the industrially important enzyme laccase. Laccase was the only ligninolytic activity detected in the supernatant when the fungus was grown in liquid culture with or without shaking. Growth and laccase production in static cultivation were superior to that in agitated cultivation, and N-limited culture is of benefit to laccase production. When using cellobiose and peptone as carbon and nitrogen source, a higher activity level was obtained. 2,2′-Azino-di-(3-ethylbenzothialozin-6-sulfonic acid) (ABTS) (1 mM) was shown to be the best inducer of laccase production, reaching maximum values of about 400 U/ml. Cu²⁺ (1 mM) also had a positive effect on laccase production, activity being enhanced to 360 U/ml. In addition, anthraquinone dye SN4R can be effectively decolorized by crude laccase (30 U/ml), the rate of which was 66%. The decolorization rate was increased by 90% with ABTS (0.16%) addition as a mediator of laccase.     

Heterogeneous production of laccase by mycelium of white-rot fungi

Mycelium of white-rot fungi secretes laccase into the medium. It was found by cultivation on malt-agar plates that the mycelium does not produce laccase equally in all its parts. The youngest hyphae at the margins of the colony represent usually the maximum producers, whereas older hyphae produce less or none at all. An exception here isCollybia velutipes which is the weakest producer of laccase of all the fungi studied and where only the older hyphae begin to secrete it. Manometric estimation of laccase showed that maximum specific activity of laccase is achieved at the boundary between the phases of initial and linear growth and i₁₁ some cases during the first half of linear growth. Ageing of the mycelium characterized by certain changes in its metabolism is reflected in changes of enzyme production by fungal hypha of different age.     

Degradation of phenanthrene by Trametes versicolor and its laccase

Phenanthrene is a three-ring polycyclic aromatic hydrocarbon and commonly found as a pollutant in various environments. Degradation of phenanthrene by white rot fungus Trametes versicolor 951022 and its laccase, isolated in Korea, was investigated. After 36 h of incubation, about 46% and 65% of 100 mg/l of phenanthrene added in shaken and static fungal cultures were removed, respectively. Phenanthrene degradation was maximal at pH 6 and the optimal temperature for phenanthrene removal was 30 degrees C. Although the removal percentage of phenanthrene was highest (76.7%) at 10 mg/l of phenanthrene concentration, the transformation rate was maximal (0.82 mg/h) at 100 mg/L of phenanthrene concentration in the fungal culture. When the purified laccase of T versicolor 951022 reacted with phenanthrene, phenanthrene was not transformed. The addition of redox mediator, 2,2'-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) or 1-hydroxybenzotriazole (HBT) to the reaction mixture increased oxidation of phenanthrene by laccase about 40% and 30%, respectively.     

Optimization of simultaneous production of tyrosinase and laccase by Neurospora crassa

Increasing demand for efficient and environmentally benign oxidation technologies has resulted in a focus on the use of oxidoreductases. Laccases and tyrosinases, which utilize molecular oxygen and produce water as by-product, are particularly attractive. Simultaneous production of laccase and tyrosinase was studied in Neurospora crassa FGSC #321 as the fungal strain which has the ability to produce tyrosinase intracellularly while producing laccase extracellularly. Using one-variable-at-a-time experiments and a Taguchi orthogonal L9 array demonstrated that a Vogel minimal medium containing 2.5% sucrose at pH 6.5 and 25?°C with no agitation or oxygen purging were the optimum conditions for N. crassa FGSC #321 growth. Conditions were adjusted to obtain the highest laccase and tyrosinase production. Results indicate that the control mechanisms for the production of both enzymes in N. crassa FGSC #321 are similar but not necessarily identical. Results revealed that transferring the harvested cells from the growth medium into the phosphate buffer (pH 6.8, 0.1M) containing cycloheximide (2?μM) and fluorouracil (2?mM) and increasing the temperature to 30?°C were the best conditions for simultaneous production of laccase and tyrosinase (1278 and 410?U/g of biomass, respectively). Nonetheless, starvation at 35?°C is proposed as the most cost-effective means for inducing laccase. The N. crassa laccase was characterized by using its molecular weight, pI value, optimal pH and temperature and stability.