Microleakage in composite resin restorations.

The aim of the present study was to evaluate the marginal microleakage of the newest generation of composite resin restorative materials. Class V restorations were prepared in human extracted teeth. Different combinations of restorative materials were used. All the materials tested showed marginal microleakage along the dentinal walls, suggesting that the adhesion value is not sufficient to counteract the composite shrinkage and to reduce the marginal space.     

Influence of soil water conditions on growth and root porosity of rice

Summary The influence of different depths of submergence (6±1 and 3±1 cm) and moisture tensions (0, 20, 60, 350, 500 and 1000 millibar) of lateritic sandy loam soil on root porosity and growth parameters of rice, variety IR8 was studied at two different growth phases under controlled greenhouse conditions. Best rice growth occurred at 3±1 cm submergence and it significantly reduced with the increase of soil moisture tension. Unlike other growth parameters, root length increased as the soil moisture tension was raised. The development of pore spaces in rice roots decreased significantly with the increase in soil moisture tension. However, higher root porosity was observed under greater depths of submergence. Irrespective of soil water condition, the number and dry weight of the root system showed significant positive correlation with root porosity. Oxygen diffusion rate in soil, which increased with the increasing moisture tension, was significantly and inversely related with the porosity of rice root. Contribution from the Agricultural Engineering Department, Indian Institute of Technology, Kharagpur, West Bengal, India.     

The effect of container porosity on root environment and plant growth

Summary The effect of container porosity on water relations in the substrate and on plant growth was examined. With clay containers the proportional effect of the wall on water loss varied with season, being responsible for 42 per cent of the total loss in winter and 25 per cent in summer. Water loss from plastic containers was 55 per cent of that from clay containers in winter, and 66 per cent in summer. Wall porosity also had a significant effect on water distribution within the container under high radiation conditions. Tomato plants grown under three water regimes showed no effect of matric stress in winter, but growth was significantly reduced for each increase in stress in summer. There was no interaction between container type and water stress. Non-porous containers gave a higher water-use efficiency and had a lower irrigation requirement than porous ones, their greatest advantage being under conditions of low transpirational loss and high evaporative loss.     

The effect of container porosity on root environment and plant growth

Summary Comparison of clay and plastic pots for tomato propagation in six experiments showed plastic pots to give significantly better results than clay pots in winter and the converse to be true in summer. In each experiment the ratio of plant growth (dry weight) in clay and plastic pots was related to both the mean daily solar radiation and the mean outside night minimum temperature. In winter, plants in both types of container made significantly more growth when stood on open benches than when stood on benches with solid surfaces. These differences in growth were related to soil temperature, clay pots being cooler than plastic pots, the temperature difference between the types of pot ranging from approximately 1°C by night in winter to 4°C under high intensity solar radiation in summer. In winter, soil temperatures were often below the optimum, and in summer in excess of the optimum. By day, temperature within the pots showed highly significant correlation with solar radiation, and by night in winter pot temperature was negatively correlated with the difference between the glasshouse and the outside air temperature. Well-defined horizontal thermal gradients were found, and these were positively correlated with soil temperature. In wet soils the thermal gradients were less than in dry soils, and because of their higher thermal conductivity wet soils were warmer than dry soils. When the normal evaporative cooling from the porous walls of clay pots was prevented by a bituminous coating, the soil temperature during the night was not significantly different from that in plastic pots. By day, however, soil temperature in non-evaporating clay pots was less than that in evaporating clay pots, due to the lower thermal conductivity of the dry clay wall.     

Eggshell porosity and the water metabolism of the chick embryo

Chick embryos have been water stressed during the last week of incubation by either withdrawing 6 cm³ of allantoic fluid or by increasing shell porosity three to four fold. Despite the large increase in water loss from these eggs they were successfully incubated to produce hatchlings of apparently normal water content. The chicks produced by water deprivation were significantly smaller than controls and it appears that the growth of embryos is therefore modulated according to the metabolites available. If this interpretation is correct it suggests that the critical role of eggshell porosity in avian development has been over-emphasized.     

The effect of regulatory peptides on water absorption in the large intestine of the frog]

Preparation of isolated large intestine of the frog was filled with Ringer's solution diluted with distilled water (1:5) and was placed into the glass with normal Ringer's solution. The preparation was weighed within every 30 min and the osmotic permeability was determined for water of the mucous and serous layers of the intestine. Then one of the peptides was added to Ringer's solution and the experiment continued. It is stated that bombesin, neurotensin, encephalins, substance P, somatostatin, pituitrin are able to change liquid absorption from the large intestine cavity when the concentration of Ringer's solution in the cavity and from its serous surface is the same. Bombesin and neurotensin inhibited while encephalins stimulated liquid absorption and these effects depended on the transport of ions. Liquid absorption by the osmotic gradient decreased using bombesin, substance P and increased using somatostatin. More complex peptide-peptide relations are observed if using pituitrin and other peptides. cAMP is shown to participate in bombesin effects.     

Multi-scale analysis of the effect of nano-filler particle diameter on the physical properties of CAD/CAM composite resin blocks

The objective of this study was to assess the effect of silica nano-filler particle diameters in a computer-aided design/manufacturing (CAD/CAM) composite resin (CR) block on physical properties at the multi-scale in silico. CAD/CAM CR blocks were modeled, consisting of silica nano-filler particles (20, 40, 60, 80, and 100 nm) and matrix (Bis-GMA/TEGDMA), with filler volume contents of 55.161%. Calculation of Young’s moduli and Poisson’s ratios for the block at macro-scale were analyzed by homogenization. Macro-scale CAD/CAM CR blocks (3 × 3 × 3 mm) were modeled and compressive strengths were defined when the fracture loads exceeded 6075 N. MPS values of the nano-scale models were compared by localization analysis. As the filler size decreased, Young’s moduli and compressive strength increased, while Poisson’s ratios and MPS decreased. All parameters were significantly correlated with the diameters of the filler particles (Pearson’s correlation test, r = ?0.949, 0.943, ?0.951, 0.976, p < 0.05). The in silico multi-scale model established in this study demonstrates that the Young’s moduli, Poisson’s ratios, and compressive strengths of CAD/CAM CR blocks can be enhanced by loading silica nanofiller particles of smaller diameter. CAD/CAM CR blocks by using smaller silica nano-filler particles have a potential to increase fracture resistance.     

On-line preconcentration/determination of zinc from water,biological and food samples using synthesized chelating resin and flame atomic absorption spectrometry

An on-line flow injection pre-concentration-flame atomic absorption spectrometry method was developed to determine trace zinc in water (tap, dam, and well water), biological (hair and nail), and liver samples. As a solid phase extractant, a synthesized new chelating resin, poly(2-thiozylmethacrylamide-co-divinylbenzene-co-2-acrylamido-2-methyl-1-propane sulfonic acid) was used. The resin was characterized by Fourier transform infrared spectroscopy, elemental analysis, and surface area by nitrogen sorption. A pre-concentration factor of 40-fold for a sample volume of 12.6 mL was obtained by using the time-based technique. The detection limit for the pre-concentration method was found to be 2.2 μg L^?1. The precision (as RSD,%) for 10 replicate determinations at the 0.04 μg mL^?1 Zn concentration was 1.2%. The calibration graph using the pre-concentration system for zinc was linear with a correlation coefficient of 0.998 in the concentration range from 0.005 to 0.05 μg mL^?1. The applicability and accuracy of the developed method were estimated by the analysis spiked water, biological, liver samples (83–105%), and also certified reference material TMDA-70 (fortified lake water) and SPS-WW1 Batch 111-Wastewater. The results were in agreement with the certified values.     

Spin-dependent absorption of water molecules

The effects of spin state of water molecules on its absorption on lyophilized DNA, lysozyme and some inorganic sorbents were studied. It was shown that the absorption rates of ortho and para water from vapor differ noticeably. The para isomer binding with preparations is distinctly faster than that of the ortho isomer in all cases. Clear-cut distinction in the sorption kinetics is determined by the difference in quantum statistics for spin isomers, which in its turn can give rise to remarkable differences in physico-chemical properties of ortho and para water. This finding opens a wide field of activity in studying fundamental and applied problems relating to the role of the spin state of water molecules in physics, chemistry, biology and medicine.     

Dental reduction and the probable mutation effect.

A recent test of the probable mutation effect can be interpreted to suggest the operations of mutations under conditions of reduced selection in the late Pleistocene reduction of the human dentition.