Experimental pK(a) values of buried residues: analysis with continuum methods and role of water penetration

Lys-66 and Glu-66, buried in the hydrophobic interior of staphylococcal nuclease by mutagenesis, titrate with pK(a) values of 5.7 and 8.8, respectively (Dwyer et al., Biophys. J. 79:1610-1620; García-Moreno E. et al., Biophys. Chem. 64:211-224). Continuum calculations with static structures reproduced the pK(a) values when the protein interior was treated with a dielectric constant (epsilon(in)) of 10. This high apparent polarizability can be rationalized in the case of Glu-66 in terms of internal water molecules, visible in crystallographic structures, hydrogen bonded to Glu-66. The water molecules are absent in structures with Lys-66; the high polarizability cannot be reconciled with the hydrophobic environment surrounding Lys-66. Equilibrium thermodynamic experiments showed that the Lys-66 mutant remained folded and native-like after ionization of the buried lysine. The high polarizability must therefore reflect water penetration, minor local structural rearrangement, or both. When in pK(a) calculations with continuum methods, the internal water molecules were treated explicitly, and allowed to relax in the field of the buried charged group, the pK(a) values of buried residues were reproduced with epsilon(in) in the range 4-5. The calculations show that internal waters can modulate pK(a) values of buried residues effectively, and they support the hypothesis that the buried Lys-66 is in contact with internal waters even though these are not seen crystallographically. When only the one or two innermost water molecules were treated explicitly, epsilon(in) of 5-7 reproduced the pK(a) values. These values of epsilon(in) > 4 imply that some conformational reorganization occurs concomitant with the ionization of the buried groups.     

Role of flexibility and polarity as determinants of the hydration of internal cavities and pockets in proteins

Molecular dynamics simulations of Staphylococcal nuclease and of 10 variants with internal polar or ionizable groups were performed to investigate systematically the molecular determinants of hydration of internal cavities and pockets in proteins. In contrast to apolar cavities in rigid carbon structures, such as nanotubes or buckeyballs, internal cavities in proteins that are large enough to house a few water molecules will most likely be dehydrated unless they contain a source of polarity. The water content in the protein interior can be modulated by the flexibility of protein elements that interact with water, which can impart positional disorder to water molecules, or bias the pattern of internal hydration that is stabilized. This might explain differences in the patterns of hydration observed in crystal structures obtained at cryogenic and room temperature conditions. The ability of molecular dynamics simulations to determine the most likely sites of water binding in internal pockets and cavities depends on its efficiency in sampling the hydration of internal sites and alternative protein and water conformations. This can be enhanced significantly by performing multiple molecular dynamics simulations as well as simulations started from different initial hydration states.     

Proton transfer roles of lysine 64 and glutamic acid 64 replacing histidine 64 in the active site of human carbonic anhydrase II.

The CO2 hydration activities of cloned human carbonic anhydrase II (carbonate hydro-lyase, EC 4.2.1.1) and variants with Lys, Glu, Gln or Ala replacing His at sequence position 64 have been measured in a variety of different buffers in the pH range 6-9. The variants with Lys-64, Gln-64 and Ala-64 showed non-Michaelis-Menten behavior under some conditions, apparent substrate inhibition being prominent near pH 9. However, asymptotic Michaelis-Menten parameters could be estimated for the limit of low substrate concentrations. All variants show distinct buffer specificities, and imidazole derivatives, Ches and phosphate buffers yield higher kcat values that Bicine, Taps and Mops buffers under otherwise similar conditions. These results are interpreted in terms of different pathways for a rate-limiting proton transfer. In unmodified enzyme, the very high catalytic activity depends on His-64 functioning as an efficient proton transfer group, but this pathway is not available in the variants with Gln-64 and Ala-64. Imidazoles, Ches and phosphate are thought to participate in a metal center-to-buffer proton transfer pathway, whereas Bicine, Taps, Mops and Mes appear to lack this capacity, so that the rate-limiting proton transfer occurs in a metal center-to-bulk water pathway for these variants. The Lys-64 and Glu-64 variants give significantly higher kcat values in Taps, Mops and Mes buffers than the Ala-64 and Gln-64 variants. The pH dependencies of these kcat values are compatible with the hypothesis that Lys-64 and Glu-64 can function as proton transfer groups. Thus, at pH near 9, Lys-64 appears to be only 5-times less efficient than His-64, while Glu-64 is inefficient. At pH 6, Lys-64 is an inefficient proton transfer group, but Glu-64 is only 2-3-times less efficient than His-64. The data indicate that Lys-64 and Glu-64 have pKa values near 8 and below 6, respectively.     

Stabilization of internal charges in a protein: water penetration or conformational change?

The ionizable amino acid side chains of proteins are usually located at the surface. However, in some proteins an ionizable group is embedded in an apolar internal region. Such buried ionizable groups destabilize the protein and may trigger conformational changes in response to pH variations. Because of the prohibitive energetic cost of transferring a charged group from water to an apolar medium, other stabilizing factors must be invoked, such as ionization-induced water penetration or structural changes. To examine the role of water penetration, we have measured the 17O and 2H magnetic relaxation dispersions (MRD) for the V66E and V66K mutants of staphylococcal nuclease, where glutamic acid and lysine residues are buried in predominantly apolar environments. At neutral pH, where these residues are uncharged, we find no evidence of buried water molecules near the mutation site. This contrasts with a previous cryogenic crystal structure of the V66E mutant, but is consistent with the room-temperature crystal structure reported here. MRD measurements at different pH values show that ionization of Glu-66 or Lys-66 is not accompanied by penetration of long-lived water molecules. On the other hand, the MRD data are consistent with a local conformational change in response to ionization of the internal residues.     

A buried lysine that titrates with a normal pKa: role of conformational flexibility at the protein-water interface as a determinant of pKa values

Previously we reported that Lys, Asp, and Glu residues at positions 66 and 92 in staphylococcal nuclease (SNase) titrate with pK(a) values shifted by up to 5 pK(a) units in the direction that promotes the neutral state. In contrast, the internal Lys-38 in SNase titrates with a normal pK(a). The crystal structure of the L38K variant shows that the side chain of Lys-38 is buried. The ionizable moiety is approximately 7 A from solvent and ion paired with Glu-122. This suggests that the pK(a) value of Lys-38 is normal because the energetic penalty for dehydration is offset by a favorable Coulomb interaction. However, the pK(a) of Lys-38 was also normal when Glu-122 was replaced with Gln or with Ala. Continuum electrostatics calculations were unable to reproduce the pK(a) of Lys-38 unless the protein was treated with an artificially high dielectric constant, consistent with structural reorganization being responsible for the normal pK(a) value of Lys-38. This reorganization must be local because circular dichroism and NMR spectroscopy indicate that the L38K protein is native-like under all conditions studied. In molecular dynamics simulations, the ion pair between Lys-38 and Glu-122 is unstable. The simulations show that a minor rearrangement of a loop is sufficient to allow penetration of water to the amino moiety of Lys-38. This illustrates both the important roles of local flexibility and water penetration as determinants of pK(a) values of ionizable groups buried near the protein-water interface, and the challenges faced by structure-based pK(a) calculations in reproducing these effects.     

Differential scanning calorimetric studies of E. coli aspartate transcarbamylase. III. The denaturational thermodynamics of the holoenzyme with single-site mutations in the catalytic chain

Aspartate transcarbamylase (EC 2.1.3.2) from E. coli is a multimeric enzyme consisting of two catalytic subunits and three regulatory subunits whose activity is regulated by subunit interactions. Differential scanning calorimetric (DSC) scans of the wild-type enzyme consist of two peaks, each comprised of at least two components, corresponding to denaturation of the catalytic and regulatory subunits within the intact holoenzyme (Vickers et al., J. Biol. Chem. 253 (1978) 8493; Edge et al., Biochemistry 27 (1988) 8081). We have examined the effects of nine single-site mutations in the catalytic chains. Three of the mutations (Asp-100-Gly, Glu-86-Gln, and Arg-269-Gly) are at sites at the C1: C2 interface between c chains within the catalytic subunit. These mutations disrupt salt linkages present in both the T and R states of the molecule (Honzatko et al., J. Mol. Biol. 160 (1982) 219; Krause et al., J. Mol. Biol. 193 (1987) 527). The remainder (Lys-164-Ile, Tyr-165-Phe, Glu-239-Gln, Glu-239-Ala, Tyr-240-Phe and Asp-271-Ser) are at the C1: C4 interface between catalytic subunits and are involved in interactions which stabilize either the T or R state. DSC scans of all of the mutants except Asp-100-Gly and Arg-269-Gly consisted of two peaks. At intermediate concentrations, Asp-100-Gly and Arg-269-Gly had only a single peak near the Tm of the regulatory subunit transition in the holoenzyme, although their denaturational profiles were more complex at high and low protein concentrations. The catalytic subunits of Glu-86-Gln, Lys-164-Ile and Asp-271-Ser appear to be significantly destabilized relative to wild-type protein while Tyr-165-Phe and Tyr-240-Phe appear to be stabilized. Values of delta delta G degree cr, the difference between the subunit interaction energy of wild-type and mutant proteins, evaluated as suggested by Brandts et al. (Biochemistry 28 (1989) 8588) range from -3.7 kcal mol-1 for Glu-86-Gln to 2.4 kcal mol-1 for Tyr-165-Phe.     

The crystal structure of staphylococcal nuclease refined at 1.7 A resolution

The crystal structure of staphylococcal nuclease has been determined to 1.7 A resolution with a final R-factor of 16.2% using stereochemically restrained Hendrickson-Konnert least-squares refinement. The structure reveals a number of conformational changes relative to the structure of the ternary complex of staphylococcal nuclease 1,2 bound with deoxythymidine-3',5'-diphosphate and Ca2+. Tyr-113 and Tyr-115, which pack against the nucleotide base in the nuclease complex, are rotated outward creating a more open binding pocket in the absence of nucleotide. The side chains of Ca2+ ligands Asp-21 and Asp-40 shift as does Glu-43, the proposed general base in the hydrolysis of the 5'-phosphodiester bond. The significance of some changes in the catalytic site is uncertain due to the intrusion of a symmetry related Lys-70 side chain which hydrogen bonds to both Asp-21 and Glu-43. The position of a flexible loop centered around residue 50 is altered, most likely due to conformational changes propagated from the Ca2+ site. The side chains of Arg-35, Lys-84, Tyr-85, and Arg-87, which hydrogen bond to the 3'- and 5'-phosphates of the nucleotide in the nuclease complex, are unchanged in conformation, with packing interactions with adjacent protein side chains sufficient to fix the geometry in the absence of ligand. The nuclease structure presented here, in combination with the stereochemically restrained refinement of the nuclease complex structure at 1.65 A, provides a wealth of structural information for the increasing number of studies using staphylococcal nuclease as a model system of protein structure and function.     

Crystal structure of Kunitz domain 1 (KD1) of tissue factor pathway inhibitor-2 in complex with trypsin. Implications for KD1 specificity of inhibition

Kunitz domain 1 (KD1) of tissue factor pathway inhibitor-2 inhibits trypsin, plasmin, and factor VIIa (FVIIa)/tissue factor with Ki values of 13, 3, and 1640 nM, respectively. To investigate the molecular specificity of KD1, crystals of the complex of KD1 with bovine beta-trypsin were obtained that diffracted to 1.8 A. The P1 residue Arg-15 (bovine pancreatic trypsin inhibitor numbering) in KD1 interacts with Asp-189 (chymotrypsin numbering) and with the carbonyl oxygens of Gly-219 and Ogamma of Ser-190. Leu-17, Leu-18, Leu-19, and Leu-34 in KD1 make van der Waals contacts with Tyr-39, Phe-41, and Tyr-151 in trypsin, forming a hydrophobic interface. Molecular modeling indicates that this complementary hydrophobic patch is composed of Phe-37, Met-39, and Phe-41 in plasmin, whereas in FVIIa/tissue factor, it is essentially absent. Arg-20, Tyr-46, and Glu-39 in KD1 interact with trypsin through ordered water molecules. In contrast, insertions in the 60-loop in plasmin and FVIIa allow Arg-20 of KD1 to directly interact with Glu-60 in plasmin and Asp-60 in FVIIa. Moreover, Tyr-46 in KD1 electrostatically interacts with Lys-60A and Arg-60D in plasmin and Lys-60A in FVIIa. Glu-39 in KD1 interacts directly with Arg-175 of the basic patch in plasmin, whereas in FVIIa, such interactions are not possible. Thus, the specificity of KD1 for plasmin is attributable to hydrophobic and direct electrostatic interactions. For trypsin, hydrophobic interactions are intact, and electrostatic interactions are weak, whereas for FVIIa, hydrophobic interactions are missing, and electrostatic interactions are partially intact. These findings provide insight into the protease selectivity of KD1.     

Inclusion of carvone enantiomers in cyclomaltoheptaose (beta-cyclodextrin): thermal behaviour and H-->D and D-->H exchange

The inclusion compounds of carvone enantiomers in cylcomaltoheptaose (beta-cyclodextrin, betaCD) are studied at defined temperatures above room temperature and in relation to H-->D and D-->H exchanges. Loss of water molecules and release of carvone molecules from the betaCD cavity are caused by increase of temperature above room temperature and are measured by the integrated intensities of the O-H and C-H Raman stretching bands, respectively. In turn, H-->D and D-->H exchanges are monitored by the integrated intensities of the O-H and O-D Raman stretching bands, respectively. All of these processes were followed in real time with a Raman spectrometer equipped with CCD detection. The results indicate that distinct carvone enantiomers lead to the formation of different betaCD inclusion hydrates that have different water content and hydration structures. In particular, the results suggest that SCarv-betaCD has a greater water content, dehydrates strongly for temperatures above room temperature, and exchanges protons faster than the RCarv-betaCD complex.     

Dynamics of the glutamic acid 242 side chain in cytochrome c oxidase

In many cytochrome c oxidases glutamic acid 242 is required for proton transfer to the binuclear heme a₃/Cu_B site, and for proton pumping. When present, the side chain of Glu-242 is orientated “down” towards the proton-transferring D-pathway in all available crystal structures. A nonpolar cavity “above” Glu-242 is empty in these structures. Yet, proton transfer from Glu-242 to the binuclear site, and for proton-pumping, is well established, and the cavity has been proposed to at least transiently contain water molecules that would mediate proton transfer. Such proton transfer has been proposed to require isomerisation of the Glu-242 side chain into an “up” position pointing towards the cavity. Here, we have explored the molecular dynamics of the protonated Glu-242 side chain. We find that the “up” position is preferred energetically when the cavity contains four water molecules, but the “down” position is favoured with less water. We conclude that the cavity might be deficient in water in the crystal structures, possibly reflecting the “resting” state of the enzyme, and that the “up/down” equilibrium of Glu-242 may be coupled to the presence of active-site water molecules produced by O₂ reduction.     

Dynamics of the glutamic acid 242 side chain in cytochrome c oxidase

In many cytochrome c oxidases glutamic acid 242 is required for proton transfer to the binuclear heme a(3)/Cu(B) site, and for proton pumping. When present, the side chain of Glu-242 is orientated "down" towards the proton-transferring D-pathway in all available crystal structures. A nonpolar cavity "above" Glu-242 is empty in these structures. Yet, proton transfer from Glu-242 to the binuclear site, and for proton-pumping, is well established, and the cavity has been proposed to at least transiently contain water molecules that would mediate proton transfer. Such proton transfer has been proposed to require isomerisation of the Glu-242 side chain into an "up" position pointing towards the cavity. Here, we have explored the molecular dynamics of the protonated Glu-242 side chain. We find that the "up" position is preferred energetically when the cavity contains four water molecules, but the "down" position is favoured with less water. We conclude that the cavity might be deficient in water in the crystal structures, possibly reflecting the "resting" state of the enzyme, and that the "up/down" equilibrium of Glu-242 may be coupled to the presence of active-site water molecules produced by O(2) reduction.     

X-ray and thermodynamic studies of staphylococcal nuclease variants I92E and I92K: insights into polarity of the protein interior

We have used crystallography and thermodynamic analysis to study nuclease variants I92E and I92K, in which an ionizable side-chain is placed in the hydrophobic core of nuclease. We find that the energetic cost of burying ionizable groups is rather modest. The X-ray determinations show water molecules solvating the buried glutamic acid under cryo conditions, but not at room temperature. The lysine side-chain does not appear solvated in either case. Guanidine hydrochloride (GnHCl) denaturation of I92E and I92K, done as a function of pH and monitored by tryptophan fluorescence, showed that I92E and I92K are folded in the pH range pH 3.5-9.0 and pH 5.5-9.5, respectively. The stability of the parental protein is independent of pH over a broad range. In contrast, the stabilities of I92E and I92K exhibit a pH dependence, which is quantitatively explained by thermodynamic analysis: the PK(a) value of the buried K92 is 5.6, while that of the buried E92 is 8.65. The free energy difference between burying the uncharged and charged forms of the groups is modest, about 6 kcal/mol. We also found that epsilon(app) for I92K and I92E is in the range approximately 10-12, instead of 2-4 commonly used to represent the protein interior. Side-chains 92E and 92K were uncharged under the conditions of the X-ray experiment. Both are buried completely inside the well-defined hydrophobic core of the variant proteins without forming salt-bridges or hydrogen bonds to other functional groups of the proteins. Under cryo conditions 92E shows a chain of four water molecules, which hydrate one oxygen atom of the carboxyl group of the glutamic acid. Two other water molecules, which are present in the wild-type at all temperatures, are also connected to the water ring observed inside the hydrophobic core. The ready burial of water with an uncharged E92 raises the possibility that solvent excursions into the interior also take place in the wild-type protein, but in a random, dynamic way not detectable by crystallography. Such transient excursions could increase the average polarity, and thus epsilon(app), of the protein interior.     

Molecular dynamics study of water penetration in staphylococcal nuclease

The ionization properties of Lys and Glu residues buried in the hydrophobic core of staphylococcal nuclease (SN) suggest that the interior of this protein behaves as a highly polarizable medium with an apparent dielectric constant near 10. This has been rationalized previously in terms of localized conformational relaxation concomitant with the ionization of the internal residue, and with contributions by internal water molecules. Paradoxically, the crystal structure of the SN V66E variant shows internal water molecules and the structure of the V66K variant does not. To assess the structural and dynamical character of interior water molecules in SN, a series of 10-ns-long molecular dynamics (MD) simulations was performed with wild-type SN, and with the V66E and V66K variants with Glu66 and Lys66 in the neutral form. Internal water molecules were identified based on their coordination state and characterized in terms of their residence times, average location, dipole moment fluctuations, hydrogen bonding interactions, and interaction energies. The locations of the water molecules that have residence times of several nanoseconds and display small mean-square displacements agree well with the locations of crystallographically observed water molecules. Additional, relatively disordered water molecules that are not observed crystallographically were found in internal hydrophobic locations. All of the interior water molecules that were analyzed in detail displayed a distribution of interaction energies with higher mean value and narrower width than a bulk water molecule. This underscores the importance of protein dynamics for hydration of the protein interior. Further analysis of the MD trajectories revealed that the fluctuations in the protein structure (especially the loop elements) can strongly influence protein hydration by changing the patterns or strengths of hydrogen bonding interactions between water molecules and the protein. To investigate the dynamical response of the protein to burial of charged groups in the protein interior, MD simulations were performed with Glu66 and Lys66 in the charged state. Overall, the MD simulations suggest that a conformational change rather than internal water molecules is the dominant determinant of the high apparent polarizability of the protein interior.     

Staphylococcus aureus aminopeptidase S is a founding member of a new peptidase clan

Staphylococcus aureus aminopeptidase S (AmpS) has been named for its predicted, but experimentally untested, aminopeptidase activity. The enzyme is homologous to biochemically characterized aminopeptidases that contain two cobalt or zinc ions in their active centers, but it is unrelated to all structurally characterized metallopeptidases. Here, we demonstrate AmpS aminopeptidase activity experimentally, and we present the 1.8-A crystal structure of the enzyme. Two metal ions with full occupancy and a third metal ion with low occupancy are present in the active site. A water molecule and Glu-319 serve as bridging ligands to the two metals with full occupancy. One of these metal ions is additionally coordinated by Glu-253 and His-348 and the other by His-381 and Asp-383. In addition, the metals are involved in weak metal-donor interactions to a water molecule and to Tyr-355. In the crystal, AmpS forms a dimer with a large internal cavity. The active sites are located at opposite ends of this internal cavity and are essentially inaccessible from the outside, suggesting that an inactive conformation was crystallized. Because gel filtration and analytical ultracentrifugation data also suggest dimer formation, the problem of substrate access to the active site cavity remains unresolved.     

Essential constituents of the 3'-phosphoesterase domain of bacterial DNA ligase D, a nonhomologous end-joining enzyme

DNA ligase D (LigD) catalyzes end-healing and end-sealing steps during nonhomologous end joining in bacteria. Pseudomonas aeruginosa LigD consists of a central ATP-dependent ligase domain fused to a C-terminal polymerase domain and an N-terminal 3'-phosphoesterase (PE) module. The PE domain catalyzes manganese-dependent phosphodiesterase and phosphomonoesterase reactions at a duplex primer-template with a short 3'-ribonucleotide tract. The phosphodiesterase, which cleaves a 3'-terminal diribonucleotide to yield a primer strand with a ribonucleoside 3'-PO4 terminus, requires the vicinal 2'-OH of the penultimate ribose. The phosphomonoesterase converts the terminal ribonucleoside 3'-PO4 to a 3'-OH. Here we show that the PE domain has a 3'-phosphatase activity on an all-DNA primer-template, signifying that the phosphomonoesterase reaction does not depend on a 2'-OH. The distinctions between the phosphodiesterase and phosphomonoesterase activities are underscored by the results of alanine-scanning, limited proteolysis, and deletion analysis, which show that the two reactions depend on overlapping but nonidentical ensembles of protein functional groups, including: (i) side chains essential for both ribonuclease and phosphatase activity (His-42, His-48, Asp-50, Arg-52, His-84, and Tyr-88); (ii) side chains important for 3'-phosphatase activity but not for 3' ribonucleoside removal (Arg-14, Asp-15, Glu-21, Gln-40, and Glu-82); and (iii) side chains required selectively for the 3'-ribonuclease (Lys-66 and Arg-76). These constellations of critical residues are unique to LigD-like proteins, which we propose comprise a new bifunctional phosphoesterase family.     

Isolation and characterization of the affinity chromatography forms of human Glu- and Lys-plasminogens and plasmins.

Affinity chromatography forms, 1 and 2, were each isolated from human Glu- and Lys-plasminogens by gradient elution from a L-lysine-substituted Sepharose column with a linear gradient of epsilon-aminocaproic acid. Although each of the two zymogen forms contains two affinity chromatography forms, the relative concentrattions of these forms in each of the zymogen preparations depended upon the plasma sample or enriched plasma fraction used for the preparation of the zymogen. Specific analytical acrylamide gel electrophoretic systems were used for the characterization of the zymogen and enzyme forms, and their component affinity chromatography forms, 1 and 2. The four zymogen affinity chromatography forms, Glu-1-plasminogen, Glu-2-plasminogen, Lys-1-plasminogen, and Lys-2-plasmingoen, show distinct stepwise differences in their molecular size and charge. The Glu-1-form is the largest in molecular size and the most acidic, and the Lys-2-form is the smallest in molecular size and the most basic. The proteolytically altered Lys-1- and Lys-2- forms appear to be specifically df the zymogen affinity chromatography forms showed a different distribution of isoelectric forms. The major isoelectric forms isolated from Glu-plasminogen with pI values of 6.2, 6.3, 6.4, and 6.6, and the major isoelectric forms isolated from Lys-plasminogen with pI values of 6.7, 7.2, 7.5, 7.8, and 8.1, (Summaria, L., Arzadon, L., Bernabe, P., Robbins, K. C., and Barlow, G. H. (1973) J. Biol. Chem. 248, 2984-2991) were shown to be mixtures of the Glu-1- and Glu-2- forms, or the Lys-1- and Lys-2- forms, respectively. Although the sialic acid contents of the Glu- and Lys- forms appear to be similar, the isolated affinity chromatography forms show distinct differences. The sialic acid contents of the Glu-1- and Lys-1- forms are identical, and are substantially higher than the sialic acid contents of the Glu-2- and Lys-2- forms which are also identical to each other. It is possible that the charge difference between the zymogen-1- and -2- forms may be related to the differences in their sialic acid content. Each of the four zymogen affinity chromatography forms, when activated by urokinase in the presence of the plasmin inhibitor, Trasylol, was converted to an apparently unique and different enzyme form. The four enzyme forms show distinct stepwise differences in molecular size; Glu-1-plasmin is the largest in size whereas Lys-2-plasmin is the smallest in size. Each plasmin-derived carboxymethyl heavy(A) chain was found to be different in molecular size, but the two carboxymethyl light(B) chains found in each of the four enzyme forms appeared to be identical and of the same molecular sizes. The four heavy(A) chains show a stepwise difference in molecular size; the Glu-1-heavy(A) chain is the largest in size whereas the Lys-2-heavy(A) chain is the smallest in size...     

Large-scale networks of hydration water molecules around proteins investigated by cryogenic X-ray crystallography.

The structures at protein-water interface, i.e. the hydration structure of proteins, have been investigated by cryogenic X-ray crystal structure analyses. Hydration structures appeared far clearer at cryogenic temperature than at ambient temperature, presumably because the motions of hydration water molecules were quenched by cooling. Based on the structural models obtained, the hydration structures were systematically analyzed with respect to the amount of water molecules, the interaction modes between water molecules and proteins, the local and the global distribution of them on the surface of proteins. The standard tetrahedral interaction geometry of water in bulk retained at the interface and enabled the three-dimensional chain connection of hydrogen bonds between hydration water molecules and polar protein atoms. Large-scale networks of hydrogen bonds covering the entire surface of proteins were quite flexible to accommodate to the large-scale conformational changes of proteins and seemed to have great influences on the dynamics and function of proteins. The present observation may provide a new concept for discussing the dynamics of proteins in aqueous solution.     

β-Galactosidases (Escherichia coli) with Double Substitutions Show That Tyr-503 Acts Independently of Glu-461 but Cooperatively with Glu-537

β-Galactosidases with single substitutions for Tyr-503, Glu-461, and Glu-537 and with double substitutions for Tyr-503 and either Glu-461 or Glu-537 were constructed. Control experiments showed that the very low k _cat values obtained for the double-substituted enzymes were not a result of contamination, reversion, or nonactive site activity catalyzed on the surface of the proteins. Circular dichroism studies showed that the structures of the enzymes were intact. E461Q/Y503F-β-galactosidase was inactivated in an “additive” manner. This indicated that Glu-461 and Tyr-503 act independently in catalysis. Because these residues are at opposite sides of the active site and act in different steps, this is expected. E537D/Y503F-β-galactosidase was only inactivated a few-fold more than the most inactive of its two single-substituted constituent β-galactosidases. This showed that Glu-537 and Tyr-503 interact cooperatively on the same step. This correlates well with the proposed role of Tyr-503 as an acid catalyst for the breakage of the covalent bond between Glu-537 and galactose.     

Site-specific mutagenesis of lysine-204, tyrosine-224, tyrosine-228, and histidine-307 of porcine kidney D-amino acid oxidase and the implications as to its catalytic function

In order to evaluate the possible contributions of Lys-204, Tyr-224, Tyr-228, and His-307 in porcine kidney D-amino acid oxidase [EC 1.4.3.3] (DAO) to its catalytic function, we constructed four point mutant cDNAs encoding enzymes possessing Glu-204, Phe-224, Phe-228, and Leu-307 by oligonucleotide-directed in vitro mutagenesis. The four mutant cDNAs and the wild type cDNA could be expressed in vitro with similar efficiencies and about 200 ng of each enzyme protein was produced from 5 micrograms of the respective capped RNA. The electrophoretic mobilities of the in vitro synthesized mutant enzymes on SDS-polyacrylamide gel were almost identical with that of the wild type DAO, and the molecular weight was calculated to be 38,000. The Glu-204 and Phe-224 mutant DAOs showed comparable enzyme activities to that of the wild type enzyme, and were inhibited strongly by sodium benzoate, a potent competitive inhibitor of DAO. The kinetic parameters of the two mutant DAOs were also comparable to those of the wild type DAO. On the other hand, the Phe-228 and Leu-307 mutant DAOs showed no detectable activity. The results indicate that Tyr-228 and His-307 play important roles as to the constitution of the active site or participate in the reaction directly, while Lys-204 and Tyr-224 are not essential in the enzyme reaction.     

Crystal structures of collagen model peptides with Pro-Hyp-Gly repeating sequence at 1.26 A resolution: implications for proline ring puckering

Triple-helical structures of (Pro-Hyp-Gly)n (n = 10, 11) at 100 K and room temperature (RT) were analyzed at 1.26 A resolution by using synchrotron radiation data. Totals of 49 and 42 water molecules per seven triplets in an asymmetric unit were found for the structures at 100 K and RT, respectively. These water molecules were classified into two groups, those in the first and second hydration shells. Although there was no significant difference between water molecules in the first shell at 100 K and those at RT, a significant difference between those in the second shell was observed. That is, the number of water molecules at RT decreased to one half and the average distance from peptide chains at RT became longer by about 0.3 A. On the other hand, of seven triplets in an asymmetric unit, three proline residues at the X position at 100 K clearly showed an up-puckering conformation, as opposed to the recent propensity-based hypothesis for the stabilization and destabilization of triple-helical structures by proline hydroxylation. This puckering was attributed to the interaction between proline rings and the surrounding water molecules at 100 K, which is much weaker at RT, as shown by longer average distance from peptide chains.