Formation of polyesters consisting of medium-chain-length 3-hydroxyalkanoic acids from gluconate by Pseudomonas aeruginosa and other fluorescent pseudomonads

Pseudomonas aeruginosa PAO and 15 other strains of this species synthesized a polyester with 3-hydroxydecanoate as the main constituent (55 to 76 mol%) if the cells were cultivated in the presence of gluconate and if the nitrogen source was exhausted; 3-hydroxyhexanoate, 3-hydroxyoctanoate, and 3-hydroxydodecanoate were minor constituents of the polymer. The polymer was deposited in granules within the cell and amounted to 70% of the cell dry matter in some strains. Among 55 different strains of 41 Pseudomonas species tested, P. aureofaciens (21.6% of cellular dry matter), P. citronellolis (78.0%), P. chlororaphis (8.5%), P. marginalis (11.4%), P. mendocina (50.7%), P. putida (33.5%), and Pseudomonas sp. strain DSM 1650 (54.6%) accumulated this type of polymer at significant levels (greater than 5%) during cultivation on gluconate. In two strains of P. facilis and P. fluorescens, as well as in one strain of P. syringae, this polymer was detected as a minor constituent (much less than 5%). All other strains accumulated either poly(3-hydroxybutyrate) or a polymer consisting mainly of 3-hydroxyoctanoate with octanoate but no polyester with gluconate as the carbon source. Only a few species (e.g., P. stutzeri) were unable to accumulate poly(hydroxyalkanoic acids) (PHA) at all. These results indicated that the formation of PHA depends on a pathway which is distinct from all other known PHA-biosynthetic pathways. The polyesters accumulated by gluconate- or octanoate-grown cells of recombinant strains of P. aeruginosa and P. putida, which harbored the Alcaligenes eutrophus poly(3-hydroxybutyrate)biosynthetic genes, contained 3-hydroxybutyrate as an additional constituent.     

Formation of polyesters consisting of medium-chain-length 3-hydroxyalkanoic acids from gluconate by Pseudomonas aeruginosa and other fluorescent pseudomonads.

Pseudomonas aeruginosa PAO and 15 other strains of this species synthesized a polyester with 3-hydroxydecanoate as the main constituent (55 to 76 mol%) if the cells were cultivated in the presence of gluconate and if the nitrogen source was exhausted; 3-hydroxyhexanoate, 3-hydroxyoctanoate, and 3-hydroxydodecanoate were minor constituents of the polymer. The polymer was deposited in granules within the cell and amounted to 70% of the cell dry matter in some strains. Among 55 different strains of 41 Pseudomonas species tested, P. aureofaciens (21.6% of cellular dry matter), P. citronellolis (78.0%), P. chlororaphis (8.5%), P. marginalis (11.4%), P. mendocina (50.7%), P. putida (33.5%), and Pseudomonas sp. strain DSM 1650 (54.6%) accumulated this type of polymer at significant levels (greater than 5%) during cultivation on gluconate. In two strains of P. facilis and P. fluorescens, as well as in one strain of P. syringae, this polymer was detected as a minor constituent (much less than 5%). All other strains accumulated either poly(3-hydroxybutyrate) or a polymer consisting mainly of 3-hydroxyoctanoate with octanoate but no polyester with gluconate as the carbon source. Only a few species (e.g., P. stutzeri) were unable to accumulate poly(hydroxyalkanoic acids) (PHA) at all. These results indicated that the formation of PHA depends on a pathway which is distinct from all other known PHA-biosynthetic pathways. The polyesters accumulated by gluconate- or octanoate-grown cells of recombinant strains of P. aeruginosa and P. putida, which harbored the Alcaligenes eutrophus poly(3-hydroxybutyrate)biosynthetic genes, contained 3-hydroxybutyrate as an additional constituent.     

Synthesis of poly-3-hydroxyalkanoates is a common feature of fluorescent pseudomonads

The fluorescent pseudomonads are classified as a group, one characteristic of which is that they do not accumulate poly-3-hydroxybutyrate (PHB) during nutrient starvation in the presence of excess carbon source. In this paper we show that prototype strains from this subclass, such as Pseudomonas aeruginosa, Pseudomonas putida, and Pseudomonas fluorescens, do accumulate poly-3-hydroxyalkanoates (PHA) when grown on fatty acids. These PHAs are composed of medium-chain-length (C6 to C12) 3-hydroxy fatty acids. The ability to form these polyesters does not depend on the presence of plasmids. A specificity profile of the enzymes involved in the biosynthesis of PHA was determined by growing Pseudomonas oleovorans on fatty acids ranging from C4 to C18. In all cases, PHAs were formed which contained C6 to C12 3-hydroxy fatty acids, with a strong preference for 3-hydroxyoctanoate when Ceven fatty acids were supplied and 3-hydroxynonanoate when Codd fatty acids were the substrate. These results indicate that the formation of PHAs depends on a specific enzyme system which is distinct from that responsible for the synthesis of PHB. While the fluorescent pseudomonads are characterized by their inability to make PHB, they appear to share the capacity to produce PHAs. This characteristic may be helpful in classifying pseudomonads. It may also be useful in the optimization of PHA production for biopolymer applications.     

Synthesis of short-/medium-chain-length poly(hydroxyalkanoate) blends by mixed culture fermentation of glycerol

Glycerol was used as a substrate in the bio-production of poly(hydroxyalkanoates) (PHAs) in an effort to establish an alternative outlet for glycerol and produce value-added products. Pseudomonas oleovorans NRRL B-14682 and Pseudomonas corrugata 388 grew and synthesized poly(3-hydroxybutyrate) (P3HB) and medium-chain-length PHA (mcl-PHA) consisting primarily of 3-hydroxydecanoic acid (C(10:0); 44 +/- 2 mol %) and 3-hydroxydodecenoic acid (C(12:1); 31 +/- 2 mol %), respectively, from glycerol at concentrations up to 5% (v/v). Cellular productivity maximized at 40% for P. oleovorans in 5% (v/v) glycerol and 20% for P. corrugata in 2% (v/v) glycerol after 72 h. Increasing the glycerol media concentration from 1% to 5% (v/v) caused a 61% and 72% reduction in the molar mass (M(n)) of the P3HB and mcl-PHA polymers, respectively. Proton-NMR analysis of the glycerol-derived P3HB revealed that the M(n) decrease was the result of esterification of glycerol onto the polymer in a chain terminating position. However, no evidence of glycerol-based chain termination was present in the mcl-PHA. The growth patterns of P. oleovorans and P. corrugata on glycerol permitted their use as mixed cultures to produce natural blends of P3HB and mcl-PHA. By incorporating a staggered inoculation pattern and varying the duration of the fermentations, P3HB/mcl-PHA ratios were achieved that varied from 34:66 to 96:4.     

Polymerase C1 levels and poly(R-3-hydroxyalkanoate) synthesis in wild-type and recombinant Pseudomonas strains.

A functional antibody highly specific for polymerase C1 of Pseudomonas oleovorans GPo1 was raised and used to determine polymerase C1 levels in in vivo experiments. The polymerase C1 antibodies did not show a cross-reaction with polymerase C2 of P. oleovorans. In wild-type P. oleovorans GPo1 and Pseudomonas putida KT2442, amounts of 0.075 and 0.06% polymerase relative to total protein, respectively, were found. P. oleovorans GPo1(pGEc405), which contained additional copies of the polymerase C1-encoding gene under the control of its native promoter, contained 0.5% polymerase C1 relative to total protein. Polymerase C1 reached 10% of total cell protein when the polymerase C1-encoding gene was overexpressed through the P(alk) promoter in P. oleovorans GPo1(pET702, pGEc74). Amounts of poly(R-3-hydroxyalkanoate) (PHA) increased significantly under non-nitrogen-limiting conditions when additional polymerase C1 was expressed in P. oleovorans. Whereas P. oleovorans produced 34% (wt/wt) PHA under these conditions, a PHA level of 64% (wt/wt) could be reached for P. oleovorans GPo1(pGEc405) and a PHA level of 52% (wt/wt) could be reached for P. oleovorans GPo1(pET702, pGEc74) after induction, compared to a PHA level of 13% for the uninduced control. All recombinant Pseudomonas strains containing additional polymerase C1 showed small changes in their PHA composition. Larger amounts of 3-hydroxyhexanoate monomer and smaller amounts of 3-hydroxyoctanoate and -decanoate were found compared to those of the wild type. Two different methods were developed to quantify rates of incorporation of new monomers into preexisting PHA granules. P. oleovorans GPo1 cells grown under nitrogen-limiting conditions showed growth stage-dependent incorporation rates. The highest PHA synthesis rates of 9.5 nmol of C8/C6 monomers/mg of cell dry weight (CDW)/min were found during the mid-stationary phase, which equals a rate of production of 80 g of PHA/kg of CDW/h.     

Structure and polymer form of poly-3-hydroxyalkanoates produced by Pseudomonas oleovorans grown with mixture of sodium octanoate/undecylenic acid and sodium octanoate/5-phenylvaleric acid

PHAs (poly-3-hydroxyalkanoates) obtained by Pseudomonas oleovorans grown with mixed carbon sources were investigated. Mixed carbon sources were sodium octanoate/undecylenic acid and sodium octanoate/5-phenylvaleric acid. Effect of carbon source in pre-culture on PHAs structure was investigated. Main fermentation was conducted with mixture of sodium octanoate/undecylenic acid, and PHA contained both saturated and unsaturated units. When more undecylenic acid was used in the medium, the ratio of unsaturated unit increased and the T(g) of the products also changed. The PHA grown with mixture of sodium octanoate and undecylenic acid was a random copolymer, which was determined by DSC analysis. Using mixed carbon sources of sodium octanoate and 5-phenylvaleric acid, highest dry cell weight and PHA concentration were obtained when 0.02g or 0.04g of 5-phenylvaleric acid were added in 50mL medium. Cultured with sodium octanoate and 5-phenylvaleric acid, PHA containing HO (3-hydroxyoctanoate) unit and HPV (3-hydroxy-5-phenylvalerate) unit was produced. T(g) of the products fell between those of pure PHO and pure PHPV. By means of DSC analysis and fractionation method, the PHA obtained was regarded as a random copolymer.     

In vivo blending of medium chain length polyhydroxy-alkanoates and polyhydroxybutyrate using recombinant Pseudomonas putida harboring phbCAB operon of Ralstonia eutropha

The in vivo blending of medium chain length polyhydroxyalkanoates (mcl-PHA) and polyhydroxybutyrate (PHB) was carried out using recombinant Pseudomonas putida after transforming the phbCAB operon of Ralstonia eutropha. The most suitable carbon sources for the production of mcl-PHA and PHB blends were identified to be octanoate and gluconate. The molar fractions of 3-hydroxyoctanoate and 3-hydroxybutyrate in the polymer blends were effectively modulated by controlling the mixing ratio of octanoate and gluconate, thereby producing a composition ranging from 95% mcl-PHA to 78% PHB.     

Pseudomonas oleovorans as a Source of Poly(beta-Hydroxyalkanoates) for Potential Applications as Biodegradable Polyesters

Pseudomonas oleovorans was grown in homogeneous media containing n-alkanoic acids, from formate to decanoate, as the sole carbon sources. Formation of intracellular poly(beta-hydroxyalkanoates) was observed only for hexanoate and the higher n-alkanoic acids. The maximum isolated polymer yields were approximately 30% of the cellular dry weight with growth on either octanoate or nonanoate. In most cases, the major repeating unit in the polymer had the same chain length as the n-alkanoic acid used for growth, but units with two carbon atoms less or more than the acid used as a carbon source were also generally present in the polyesters formed. Indeed, copolymers containing as many as six different types of beta-hydroxyalkanoate units were formed. The weight average molecular weights of the poly(beta-hydroxyalkanoate) copolymers produced by P. oleovorans ranged from 90,000 to 370,000. In spite of the higher cell yields obtained with octanoate and nonanoate, the use of hexanoate and heptanoate yielded higher-molecular-weight polymers. These copolyesters represent an entirely new class of biodegradable thermoplastics.     

Substrate specificities of bacterial polyhydroxyalkanoate depolymerases and lipases: bacterial lipases hydrolyze poly(omega-hydroxyalkanoates).

The substrate specificities of extracellular lipases purified from Bacillus subtilis, Pseudomonas aeruginosa, Pseudomonas alcaligenes, Pseudomonas fluorescens, and Burkholderia cepacia (former Pseudomonas cepacia) and of extracellular polyhydroxyalkanoate (PHA) depolymerases purified from Comamonas sp., Pseudomonas lemoignei, and P. fluorescens GK13, as well as that of an esterase purified from P. fluorescens GK 13, to various polyesters and to lipase substrates were analyzed. All lipases and the esterase of P. fluorescens GK13 but none of the PHA depolymerases tested hydrolyzed triolein, thereby confirming a functional difference between lipases and PHA depolymerases. However, most lipases were able to hydrolyze polyesters consisting of an omega-hydroxyalkanoic acid such as poly(6-hydroxyhedxanoate) or poly(4-hydroxybutyrate). The dimeric ester of hydroxyhexanoate was the main product of enzymatic hydrolysis of polycaprolactone by P. aeruginosa lipase. Polyesters containing side chains in the polymer backbone such as poly (3-hydroxybutyrate) and other poly(3-hydroxyalkanoates) were not or were only slightly hydrolyzed by the lipases tested.     

Metabolism of poly(3-hydroxyalkanoates) (PHAs) by Pseudomonas oleovorans. Identification and sequences of genes and function of the encoded proteins in the synthesis and degradation of PHA

Pseudomonas oleovorans accumulates poly(3-hydroxyalkanoates) (PHAs) after growth on medium chain length hydrocarbons. Large amounts of this polyester are synthesized when cells are grown under nitrogen-limiting conditions. When nitrogen is resupplied in the medium, the accumulated PHA is degraded. In this paper, we describe mutants which are defective in the synthesis or in the degradation of PHA. These mutants were used to select DNA fragments which encode PHA polymerases and a PHA depolymerase. A 25-kilobase (kb) DNA fragment was isolated from P. oleovorans that complements a Pseudomonas putida mutant unable to accumulate PHA. Subcloning resulted in the assignment of a 6.4-kb EcoRI fragment as the pha locus, containing genetic information for PHA synthesis. Mutants in the PHA degradation pathway were also complemented by this fragment, indicating that genes encoding PHA biosynthetic and degradative enzymes are clustered. Analysis of the DNA sequence of the 6.4-kb fragment revealed the presence of two open reading frames encoding PHA polymerases based on homology to the poly(3-hydroxybutyrate) polymerase from Alcaligenes eutrophus. A third open reading frame complemented the PHA degradation mutation and is likely to encode a PHA depolymerase. The presence of two PHA polymerases is due to a 2098-base pair DNA duplication. The PHA polymerases are 53% identical and show 35-40% identity to the poly(3-hydroxybutyrate) polymerase. No clear difference in specificity was found for the PHA polymerases. However, with the pha locus cloned on a multicopy vector, a polymer was accumulated that contains a significantly higher amount of substrate-derived monomers. An increase in the rate of polyester synthesis versus oxidation of the monomers in the beta-oxidation explains these findings.     

Analysis of in vivo substrate specificity of the PHA synthase from Ralstonia eutropha: formation of novel copolyesters in recombinant Escherichia coli

In order to investigate the in vivo substrate specificity of the type I polyhydroxyalkanoate (PHA) synthase from Ralstonia eutropha, we functionally expressed the PHA synthase gene in various Escherichia coli mutants affected in fatty acid beta-oxidation and the wild-type. The PHA synthase gene was expressed either solely (pBHR70) or in addition to the R. eutropha genes encoding beta-ketothiolase and acetoacetyl-coenzyme A (CoA) reductase comprising the entire PHB operon (pBHR68) as well as in combination with the phaC1 gene (pBHR77) from Pseudomonas aeruginosa encoding type II PHA synthase. The fatty acid beta-oxidation route was employed to provide various 3-hydroxyacyl-CoA thioesters, depending on the carbon source, as in vivo substrate for the PHA synthase. In vivo PHA synthase activity was indicated by PHA accumulation and substrate specificity was revealed by analysis of the comonomer composition of the respective polyester. Only in recombinant E. coli fad mutants harboring plasmid pBHR68, the R. eutropha PHA synthase led to accumulation of poly(3-hydroxybutyrate-co-3-hydroxyoctanoate) (poly(3HB-co-3HO)) and poly(3HB-co-3HO-co-3-hydroxydodecanoate (3HDD)), when octanoate and decanoate or dodecanoate were provided as carbon source, respectively. Coexpression of phaC1 from P. aeruginosa indicated and confirmed the provision of PHA precursor via the beta-oxidation pathway and led to the accumulation of a blend of two different PHAs in the respective E. coli strain. These data strongly suggested that R. eutropha PHA synthase accepts, besides the main substrate 3-hydroxybutyryl-CoA, also the CoA thioesters of 3HO and 3HDD.     

Poly-3-hydroxyoctanoate P(3HO), a medium chain length polyhydroxyalkanoate homopolymer from Pseudomonas mendocina

Pseudomonas mendocina was found to produce a unique homopolymer of poly(3-hydroxyoctanoate), P(3HO), rather than a copolymer, when grown on sodium octanoate as the sole carbon source. Although this polymer has been produced by other organisms, interestingly this is the first time an absolute homopolymer has been produced by a wild type organism. In addition, a detailed study on the effects of different extraction methods on the yield, molecular weight, thermal properties, and lipopolysaccharide content of P(3HO) has been carried out. The organism was able to accumulate P(3HO) up to 31.38% of its dry cell weight within 48 h in mineral salt medium. Characterization of the monomer was carried out using FTIR, GC-MS, (13)C, (1)H, and HSQC NMR spectroscopy. The polymer had a crystallinity of 37.5%, Young's modulus value of 11.6 MPa and contact angle of 77.3°. Microstructural studies of solvent cast polymer films revealed a smooth surface topography with a root-mean-square roughness value of 0.238 μm.     

The role of the fatty acid beta-oxidation multienzyme complex from Pseudomonas oleovorans in polyhydroxyalkanoate biosynthesis: molecular characterization of the fadBA operon from P. oleovorans and of the enoyl-CoA hydratase genes phaJ from P. oleovorans and Pseudomonas putida

In order to investigate the role of the putative epimerase function of the beta-oxidation multienzyme complex (FadBA) in the provision of (R)-3-hydroxyacyl-CoA thioesters for medium-chain-length polyhydroxyalkanoate (PHA(MCL)) biosynthesis, the fadBA(Po) operon of Pseudomonas oleovorans was cloned and characterized. The fadBA(Po) operon and a class-II PHA synthase gene of Pseudomonas aeruginosa were heterologously co-expressed in Escherichia coli to determine whether the putative epimerase function of FadBA(Po) has the ability to provide precursors for PHA accumulation in a non-PHA-accumulating bacterium. Cultivation studies with fatty acids as carbon source revealed that FadBA(Po) did not mediate PHA(MCL) biosynthesis in the E. coli wild-type strain harboring a PHA synthase gene. However, PHA accumulation was strongly impaired in a recombinant E. coli fadB mutant, which harbored a PHA synthase gene. These data indicate that in pseudomonads FadBA does not possess the inherent property, based on a putative epimerase function, to provide the ( R)-enantiomer of 3-hydroxyacyl-CoA efficiently and that other linking enzymes are required to efficiently channel intermediates of beta-oxidation towards PHA(MCL) biosynthesis. However, the phaJ gene from P. oleovorans and from Pseudomonas putida, both of which encoded a 3- Re enoyl-CoA hydratase, was identified. The co-expression of phaJ(Po/Pp) with either a class-II PHA synthase gene or the PHA synthase gene from Aeromonas punctata in E. coli revealed that PhaJ(Po/Pp) mediated biosynthesis of either PHA(MCL), contributing to about 1% of cellular dry mass, or of poly(3-hydroxybutyrate- co-3-hydroxyhexanoate), contributing to 3.6% of cellular dry mass, when grown on decanoate. These data indicate that FadBA(Po)does not mediate the provision of (R)-3-hydroxyacyl-CoA, which resembles FadBA of non-PHA-accumulating bacteria, and that 3- Re enoyl-CoA hydratases are required to divert intermediates of fatty acid beta-oxidation towards PHA biosynthesis in P. oleovorans.     

Engineering of stable recombinant bacteria for production of chiral medium-chain-length poly-3-hydroxyalkanoates.

In order to scale up medium-chain-length polyhydroxyalkanoate (mcl-PHA) production in recombinant microorganisms, we generated and investigated different recombinant bacteria containing a stable regulated expression system for phaC1, which encodes one of the mcl-PHA polymerases of Pseudomonas oleovorans. We used the mini-Tn5 system as a tool to construct Escherichia coli 193MC1 and P. oleovorans POMC1, which had stable antibiotic resistance and PHA production phenotypes when they were cultured in a bioreactor in the absence of antibiotic selection. The molecular weight and the polydispersity index of the polymer varied, depending on the inducer level. E. coli 193MC1 produced considerably shorter polyesters than P. oleovorans produced; the weight average molecular weight ranged from 67,000 to 70,000, and the polydispersity index was 2.7. Lower amounts of inducer added to the media shifted the molecular weight to a higher value and resulted in a broader molecular mass distribution. In addition, we found that E. coli 193MC1 incorporated exclusively the R configuration of the 3-hydroxyoctanoate monomer into the polymer, which corroborated the enantioselectivity of the PhaC1 polymerase enzyme.     

Scanning electron microscopy of polyhydroxyalkanoate degradation by bacteria

Bacterial degradation of sheets of selected polyhydroxyalkanoates by Comamonas sp., Pseudomonas lemoignei and Pseudomonas fluorescens GK13 is reported. Five natural polyhydroxyalkanoates were used, namely poly(3-hydroxybutyrate), poly(3-hydroxyvalerate), a copolymer of 3-hydroxybutyrate and 3-hydroxyvalerate, a copolymer of mainly 3-hydroxyoctanoate and minor amounts of 3-hydroxyhexanoate, and two rubber-like copolymers of saturated and unsaturated hydroxyalkanoic acids that had been modified by electron-beam-induced cross-linking. Each of these polymers was degraded by at least one bacterial strain, the rate of hydrolysis being dependent on the surface area of the polymer exposed to attack. Scanning electron microscopy of partially degraded samples showed that hydrolysis started at the surface and at physical lesions in the polymer and proceeded to the inner part of the material. No evidence for areas of non-degradable polymer was found for any of the polymers analysed, even if the polymer contained chemical cross-links. Received: 24 July 1996 / Accepted: 29 August 1996     

The biodegradation of poly-3-hydroxyalkanoates,PHAs, with long alkyl substitutents byPseudomonas maculicola

Utilizing a quantitative clear zone technique, the activity of an extracellular depolymerase system fromPseudomonas maculicola was investigated. Polymer degradation was influenced by the amount and availability of secondary carbon sources, with a simultaneous utilization of both sources. The initial carbon source in the liquid preculture also affected the eventual colony growth and polymer degradation. The enzyme solution was determined to readily degrade poly-3-hydroxyalkanoates (PHAs) with relatively long alkyl substituents at the 3 position: poly-3-hydroxyoctanoate (PHO), poly-3-hydroxynonanoate (PHN), and their copolymers (P[HO-co-HN]) and poly-3-hydroxyundecanoate (PHU). However, the system was unable to degrade either PHAs with shorter alkyl groups, including poly-3-hydroxybutyrate (PHB) and the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P[HB-co-HV]) or PHAs with unusual substituents such as poly(3-hydroxy-5-phenylvaleric acid) (PHPV). It is proposed that degradation of these more bulky side chain polymers was prevented by the inability of the bacteria to assimilate their monomeric components, which inhibited the successful utilization of secondary carbon sources and thus inhibited colony growth.     

Fourier transform infrared spectroscopy for screening and quantifying production of PHAs by Pseudomonas grown on sodium octanoate

Poly(hydroxyalkanoates) PHAs are synthesized by many bacteria as inclusion bodies and their biodegradability and structural diversity have been studied with a view to their potential application as biodegradable materials. A method based on FT-IR was developed to carry out rapid qualitative and quantitative analysis of PHAs in Pseudomonas, when they were grown on sodium octanoate. Using absorbance of the ester band of PHAs, a rapid method was reported to distinguish PHB and PHO and to determine polymer content in intact bacteria. Relative areas in which the C=O area was normalized to the area of the peak representing the amid group (1656 cm(-1)) characteristic of bacteria were calibrated to the polymer content which was determined after solvent extraction. Polymer contents vary from 0% to 53% and depend on the nature of the bacteria. Among 27 strains of Pseudomonas belonging to the rRNA homology group I, a very low amount of bacteria were able to produce PHB. The majority of strains were able to produce a copolymer, PHO, in which the major constituent unit is 3-hydroxyoctanoate. The FT-IR results were further confirmed by gas chromatography analysis after methanolysis of polymer, but FT-IR method requires less preparation of sample than gas chromatography and it is very useful for screening a large variety of Pseudomonas.     

Production of unsaturated polyesters by Pseudomonas oleovorans

Pseudomonas oleovorans was grown separately on 3-hydroxy-6-octenoic acid and 3-hydroxy-7-octenoic acid as the only carbon source and under ammonium nutrient-limiting conditions to produce storage polyesters. The polyesters produced contained mainly unsaturated C8 units. Small amounts of both the saturated and the unsaturated C6 units were also present, but only about 1% of the saturated 3-hydroxyoctanoate units was detected. The polyester obtained from 3-hydroxy-6-octenoic acid, which was a mixture of the cis and trans isomers, also contained units with cis and trans double bonds. The weight average molecular weights of the polymers produced were in the range of 339,000-383,000 as determined by g.p.c. relative to polystyrene, with Mw/Mn ratios of 1.8-2.1. The mechanism of PHA formation from n-octene previously reported is discussed in relation to the present results, and the two were found to be in good agreement.     

长链烷烃降解菌的降解特性

对长链烷烃降解菌的降解能力和摄取模式进行了研究。评价14株烃降解菌利用中长链烃生长的能力,发现只有少数烃降解菌能够获得良好生长,其中Mycobacterium fortuitum514,Pseudomonas aeruginosa1785和Pseudomonas marginata766等3株菌能够高效降解C20到C33的长链烷烃。辛烷不能支持这些长链烷烃降解菌的生长,说明其烃氧化酶与Pseudomonas oleovorans的OCT质粒编码的单氧酶不同。此外,M.fortuitum不产胞外表面活性剂,而P.aeruginosa和P.marginata则是表面活性剂产生菌,然而三者在以烃为碳源生长时均显示出很高的细胞表面疏水性。根据生长现象分析3株菌采用了不同的烷烃摄取模式。