Kinetic studies on the binding of Streptomyces subtilisin inhibitor with subtilisin BPN′

The binding mechanism of Streptomyces subtilisin inhibitor and subtilisin BPN′ was studied kinetically with the stopped-flow method by monitoring the protein fluorescence increase due to complex formation. In the lower concentration range of proteins, the reaction followed the second-order kinetics. The pH dependence of the apparent second-order rate constant, k_on, suggested the involvement of the two ionizable groups of pK_a of 7.8 and 10 in the binding. The activation parameters were calculated from the temperature dependence of the apparent second-order rate constants. The value of the apparent activation energy (E_A = 39.7 kJ · mol^?1, 9.50 kcal · mol^?1) and insensitivity of k_on to the viscosity of the medium suggest that the binding is not a simple diffusion-controlled bimolecular association. Further studies with a much broader range of protein concentrations have revealed that the reaction tends to approach first-order kinetics as the inhibitor concentration increases. The binding reaction is, therefore, reconcilable with a two-step mechanism, in which a fast bimolecular association is followed by a slow unimolecular isomerization step; the dissociation constant of the first step, K_L, is estimated to be 1.2 × 10^?4m and the rate constant of the second step, k₊₂, to be 770 s^?1. It was also found that the increase of tryptophan fluorescence due to the complex formation occurs solely in the rate-determining unimolecular process.     

Binding between thermolysin and its specific inhibitor, N-phosphoryl-L-leucyl-L-tryptophan (PLT)

The interaction between thermolysin and its specific inhibitor, PLT (N-phosphoryl-L-leucyl-L-tryptophan), has been investigated by steady-state inhibitory kinetics analysis, fluorometric titration, and the stopped-flow method. The inhibitor constant of PLT, Ki, and the dissociation constant of thermolysin(E)-PLT(I) complex, Kd, are found to be smaller by a factor of 4 to 300, depending on pH, resulting in stronger binding, than those of talopeptin and phosphoramidon, but all of them show similar pH dependence. The dependence of the apparent first-order rate constant, Kapp, on the inhibitor concentration is consistent with a minimum two-step mechanism, including a fast bimolecular step followed by a slow unimolecular step, (Formula: see text). The values of K-1 (the dissociation constant of the intermediate EItr) and K-2 (the backward rate constant in the unimolecular step) are not so significantly different between PLT and talopeptin, while the K+2 (forward rate constant in the unimolecular step) value for PLT is about 14 times larger than that of talopeptin (pH 5.5). These facts suggest that the forward rate of the isomerization step, EItr----EI, is much larger in the absence of the sugar moiety of talopeptin, and hence it induces the stronger binding of PLT to thermolysin than that of talopeptin.     

Temperature dependence of anion transport inhibitor binding to human red cell membranes

The binding characteristics of the inhibitor of anion transport in human red cells, 4,4'-dibenzamido-2,2'-disulfonic stilbene (DBDS), to the anion transport protein of red cell ghost membranes in buffer containing 150 mM NaCl have been measured over the temperature range 0-30 degrees C by equilibrium and stopped-flow fluorescence methods. The equilibrium dissociation constant Keq, increased with temperature. No evidence of a 'break' in the ln(Keq) vs. 1/T plot was found. The standard dissociation enthalpy and entropy changes calculated from the temperature dependence are 9.1 +/- 0.9 kcal/mol and 3.2 +/- 0.3 e.u., respectively. Stopped-flow kinetic studies resolve the overall binding into two steps: a bimolecular association of DBDS with the anion transport protein, followed by a unimolecular rearrangement of the DBDS-protein complex. The rate constants for the individual steps in the binding mechanism can be determined from an analysis of the concentration dependence of the binding time course. Arrhenius plots of the rate constants showed no evidence of a break. Activation energies for the individual steps in the binding mechanism are 11.6 +/- 0.9 kcal/mol (bimolecular, forward step), 17 +/- 2 kcal/mol (bimolecular, reverse step), 6.4 +/- 2.3 kcal/mol (unimolecular, forward step), and 10.6 +/- 1.9 kcal/mol (unimolecular, reverse step). Our results indicate that there is an appreciable enthalpic energy barrier for the bimolecular association of DBDS with the transport protein, and appreciable enthalpic and entropic barriers for the unimolecular rearrangement of the DBDS-protein complex.     

The two-step interaction between α-dimethylaminonaphthalene-1-sulfonyl-pepsinogen-(1–12) and pepsin

The binding between α-dimethylaminonaphthalenesulfonyl-(1–12) and porcine pepsin can be detected by the large changes that occur in the fluorescence spectra of the dimethylaminonaphthalenesulfonyl chromophore due to energy transfer from tryptophan residues of the protein. The interaction was previously shown to consist of two steps: a fast step leading to a greatly enhanced fluorescence followed by a slower rearrangement step which reduces the fluorescence but leads to tighter binding and inhibition of the catalytic activity of pepsin (1). The two steps have been studied over a wide range of values of pH, temperature, and ionic strength to gain additional insights into the physical events occurring during the interaction. Based on the pH and ionic strength dependence, the initial step most likely involves electrostatic interaction of the basic peptide inhibitor with the acidic surface of pepsin in a rapid collision process. The use of this fluorescent reporter group has also suggested that the equilibrium binding after the slower rearrangement may also be pH dependent with most effective binding at higher pH. The kinetics of the slow step were measured by monitoring the continuous fluorescence decay. The resulting rates are compared to the rates observed by others for binding of pepstatin to pepsin. From the pH dependence of fluorescence, pK_app values are obtained for the dansylated peptide (3.25), for the pH dependence of the initial binding step (4.87), and for the equilibrium position (4.75).     

A three-step kinetic mechanism for peptide binding to MHC class II proteins

Peptide binding reactions of class II MHC proteins exhibit unusual kinetics, with extremely slow apparent rate constants for the overall association (<100 M(-)(1) s(-)(1)) and dissociation (<10(-)(5) s(-)(1)) processes. Various linear and branched pathways have been proposed to account for these data. Using fluorescence resonance energy transfer between tryptophan residues in the MHC peptide binding site and aminocoumarin-labeled peptides, we measured real-time kinetics of peptide binding to empty class II MHC proteins. Our experiments identified an obligate intermediate in the binding reaction. The observed kinetics were consistent with a binding mechanism that involves an initial bimolecular binding step followed by a slow unimolecular conformational change. The same mechanism is observed for different peptide antigens. In addition, we noted a reversible inactivation of the empty MHC protein that competes with productive binding. The implications of this kinetic mechanism for intracellular antigen presentation pathways are discussed.     

Equilibrium study on the binding between thermolysin and Streptomyces metalloprotease inhibitor, talopeptin (MKI)

The binding between thermolysin and its specific inhibitor, talopeptin (MKI), was found to show a fluorescence increase when excited at 280 nm and 295 nm, and a difference spectrum characterized by two peaks at 294 nm and 285 nm with a shoulder around 278 nm, indicating a microenvironmental change in tryptophan residue(s) of thermolysin and/or talopeptin. The inhibitor constant of talopeptin against thermolysin, Ki, was determined over the pH range 5-9 from the inhibition of the enzyme activity towards 3-(2-furylacryloyl)-glycyl-L-leucine amide (FAGLA) as a substrate. The dissociation constant of thermolysin-talopeptin complex, Kd, determined directly from fluorometric titration was in good agreement with the inhibitor constant, Ki, between pH 6 and 8.5. The pH dependence of Ki and Kd suggested that at least two ionizable groups of thermolysin in their protonated forms are essential for the binding between thermolysin and talopeptin. The temperature dependence of K1 at pH 5.5 indicated that the binding is largely exothermic (delta H degree = -12 kcal/mol) and essentially enthalpy-driven.     

Quenching of red cell tryptophan fluorescence by mercurial compounds

Intrinsic tryptophan fluorescence in red cell ghost membranes labeled with N-ethylmaleimide (N-EM) is quenched in a dose-dependent manner by the organic mercurial p-chloromercuribenzene sulfonate (p-CMBS). Fluorescence lifetime analysis shows that quenching occurs by a static mechanism. Binding of p-CMBS occurs by a rapid (less than 5 s) biomolecular association (dissociation constant K1 = 1.8 mM) followed by a slower unimolecular transition with forward rate constant k2 = 0.015 s-1 and reverse rate constant k-2 = 0.0054 s-1. Analysis of the temperature dependence of k2 gives delta H = 6.5 kcal/mol and delta S = -21 eu. The mercurial compounds p-chloromercuribenzoic acid, p-aminophenylmercuric acetate, and mercuric chloride quench red cell tryptophan fluorescence by the same mechanism as p-CMBS does; the measured k2 value was the same for each compound, whereas K1 varied. p-CMBS also quenches the tryptophan fluorescence in vesicles reconstituted with purified band 3, the red cell anion exchange protein, in a manner similar to that in ghost membranes. These experiments define a mercurial binding site on band 3 in ghosts treated with N-EM and establish the binding mechanism to this site. The characteristics of this p-CMBS binding site on band 3 differ significantly from those of the p-CMBS binding site involved in red cell water and urea transport inhibition.     

Induced fit and kinetic mechanism of adenylation catalyzed by Escherichia coli threonyl-tRNA synthetase

Threonyl-tRNA synthetase (ThrRS) must discriminate among closely related amino acids to maintain the fidelity of protein synthesis. Here, a pre-steady state kinetic analysis of the ThRS-catalyzed adenylation reaction was carried out by monitoring changes in intrinsic tryptophan fluorescence. Stopped flow fluorimetry for the forward reaction gave a saturable fluorescence quench whose apparent rate increased hyperbolically with ATP concentration, consistent with a two-step mechanism in which rapid substrate binding precedes an isomerization step. From similar experiments, the equilibrium dissociation constants for dissociation of ATP from the E.Thr complex (K(3) = 450 +/- 180 microM) and threonine from the E.ATP complex (K'(4) = 135 microM) and the forward rate constant for adenylation (k(+5) = 29 +/- 4 s(-1)) were determined. A saturable fluorescence increase accompanied the pyrophosphorolysis of the E.Thr - AMP complex, affording the dissociation constant for PP(i) (K(6) = 170 +/- 50 microM) and the reverse rate constant (k(-5) = 47 +/- 4 s(-1)). The longer side chain of beta-hydroxynorvaline increased the apparent dissociation constant (K(4[HNV]) = 6.8 +/- 2.8 mM) with only a small reduction in the forward rate (k'(+5[HNV]) = 20 +/- 3.1 s(-1)). In contrast, two nonproductive substrates, threoninol and the adenylate analogue 5'-O-[N-(L-threonyl)sulfamoyl]adenosine (Thr-AMS), exhibited linear increases in k(app) with ligand concentration, suggesting that their binding is slow relative to isomerization. The proposed mechanism is consistent with steady state kinetic parameters. The role of threonine binding loop residue Trp434 in fluorescence changes was established by mutagenesis. The combined kinetic and molecular genetic analyses presented here support the principle of induced fit in the ThrRS-catalyzed adenylation reaction, in which substrate binding drives conformational changes that orient substrates and active site groups for catalysis.     

Inhibition of factor Xa by a peptidyl-alpha-ketothiazole involves two steps. Evidence for a stabilizing conformational change.

Recently, peptidylketothiazoles have been shown to be potent inhibitors of proteases, but the details of the interaction have not yet been studied. In the work presented here, the interaction of factor Xa, a coagulation protease, with the transition state inhibitor BnSO(2)-D-Arg-Gly-Arg-ketothiazole (C921-78) is characterized. C921-78 is a tight and selective inhibitor of the coagulation protease factor Xa (K(d) = 14 pM). The hydrolytic activity of factor Xa was inhibited by C921-78 in a time-dependent manner. The rate-limiting step of the bimolecular combination of inhibitor and enzyme was competitive with the substrate. Conversely, the inhibitor could be displaced from the active site of the enzyme after exposure of the preformed complex to an excess of substrate or to the active site inhibitor dansyl-Glu-Gly-Arg-chloromethyl ketone (DEGR-CMK) in a slow reaction. The formation of the C921-78-factor Xa complex resulted in a 60% increase in the magnitude of the fluorescence emission spectrum. Rapid mixing of the enzyme and inhibitor produces a monophasic fluorescence increase, compatible with spectral transition in a single step. The rate constant for this reaction increased hyperbolically with the concentration of C921-78, but the amplitude remained constant. These results are consistent with the initial formation of an enzyme-inhibitor complex (EI), followed by a unimolecular conversion of EI to EI linked to a spectral transition. The rate constants of the isomerization provide an estimate of 300000-fold stabilization. Thus, the inhibition of factor Xa by C921-78 follows a mechanism similar to that described classically for slow tight binding inhibitors. However, the two steps of the reaction cannot be kinetically separated by the rapid equilibrium assumption, and therefore, the formation of EI is partially rate-limiting, too. The driving energy for the unusually fast isomerization step may result from the highly favorable interactions of the inhibitor in the primary binding site.     

Mechanism of slow-binding inhibition of human leukocyte elastase by trifluoromethyl ketones

Kinetics of inhibition have been determined for the interaction of human leukocyte elastase (HLE) with two series of peptide trifluoromethyl ketones (TFMKs): X-Val-CF3,X-Pro-Val-CF3,X-Val-Pro-Val-CF3, and X-Lys(Z)-Val-Pro-Val-CF3, where X is MeOSuc or Z. These compounds are "slow-binding" inhibitors of HLE and, thus, allow the determination of Ki, the dissociation constant for the stable complex of inhibitor and enzyme, as well as kon and koff, the rate constants for formation and decomposition of this complex. Maximal potency is reached with Z-Lys(Z)-Val-Pro-Val-CF3, which displays a Ki less than 0.1 nM. Upon binding to HLE, these compounds undergo addition by the hydroxyl of the active site serine to form a hemiketal. The evidence supporting a hemiketal intermediate includes Ki values of 1.6 and 80,000 nM for Z-Val-Pro-Val-CF3 and its alcohol analogue, linear free energy correlations between inhibitory potency and catalytic efficiency for structurally related TFMKs and substrates, and the pH dependence of kon for the inhibition of HLE by Z-Val-Pro-Val-CF3, which is sigmoidal and displays a pKa of 6.9. Hemiketal formation is probably not rate limiting, however. Kinetic solvent isotope effects of unity suggest that kon cannot be rate limited by a reaction step, like hemiketal formation, that is subject to protolytic catalysis. A general mechanism that is consistent with these results is one in which formation of the hemiketal is rapid and is followed or preceded by a slow step that rate limits kon.(ABSTRACT TRUNCATED AT 250 WORDS)     

Tryptophan fluorescence as a probe of placental ribonuclease inhibitor binding to angiogenin

The binding of human placental ribonuclease inhibitor (PRI) to angiogenin, a human protein that induces neovascularization, occurs with a 1:1 stoichiometry and is accompanied by a 50% increase in tryptophan fluorescence. In contrast, the binding of PRI to bovine pancreatic RNase A or to angiogenin oxidized at its single tryptophan residue results in a quenching of fluorescence. These observations suggest that there is a change in the local environment of Trp-89 of angiogenin. Quenching experiments with acrylamide are consistent with the view that Trp-89 is exposed in the native protein and becomes less accessible upon formation of the complex with PRI. Stopped-flow kinetic measurements monitoring the fluorescence enhancement indicate a two-step mechanism for the binding of PRI to angiogenin. The first step involves rapid formation of an enzyme-inhibitor complex, EI, followed by a slower isomerization of EI to a tight enzyme-inhibitor complex, EI*: (Formula: see text). In 0.1 M NaCl at pH 6 and 25 degrees C, the values of K1 and K2 are 0.53 microM and 97 s-1, respectively. The apparent second-order rate constant of association at protein concentrations much less than K1 is approximated by K2/K1 and equals 1.8 X 10(8) M-1 s-1. The corresponding value for the association of PRI with RNase A is only slightly higher, 3.4 X 10(8) M-1 s-1. The effects of pH and sodium chloride concentration on the association rate of PRI with angiogenin suggest the importance of ionizable groups and ionic interactions, respectively, in the association process.(ABSTRACT TRUNCATED AT 250 WORDS)     

Intrinsic fluorescence changes and rapid kinetics of proteinase deformation during serpin inhibition

The X-ray crystal structure of the serpin-proteinase complex suggested that the serpin deformed the proteinase thereby inactivating the molecule. Using a variant of alpha(1)-antitrypsin in which both tryptophan residues have been replaced by phenylalanine, we have shown that the proteinase becomes partially unfolded during serpin inhibition. The tryptophan free variant, alpha(1)-antitrypsin((FF)), is fully active as an inhibitor of thrombin. Thrombin has a fluorescence emission maximum of 340 nm which blue shifts to 346 nm, concomitant with a 40% increase in intensity, upon formation of the serpin-proteinase complex indicative of substantial conformational change within the proteinase. Stopped-flow analysis of the fluorescence changes within the proteinase indicated a two-step mechanism. A fast bimolecular reaction with a rate constant of 2.8x10(6) M(-1) s(-1) is followed by a slow unimolecular process with a rate of 0.26 s(-1) that is independent of concentration. We propose that the first rate is formation of an initial complex which is then followed by a slower process involving the partial unfolding of the proteinase during its translocation to the opposite pole of the serpin.     

Equilibrium and kinetic studies on the binding of gluconolactone to almond beta-glucosidase in the absence and presence of glucose

The binding of glucono-1,5-lactone (gluconolactone) with almond beta-glucosidase was studied at pH 5.0 and 25 degrees C, in the absence and presence of glucose, by monitoring the enzyme fluorescence as a probe. From the results of fluorometric titration, the dissociation constant Kd and the maximum fluorescence intensity increase (percent) of the enzyme-gluconolactone complex relative to the enzyme alone, delta Fmax, were determined to be 12.7 microM and 14.7%, respectively. From the study of the temperature dependence of Kd, delta G degrees, delta H degrees and delta S degrees for the binding were evaluated to be -6.7 kcal mol-1, -3.5 kcal mol-1, and 10.8 e.u. (cal mol-1 deg-1), respectively, at 25 degrees C. The analysis of the fluorometric titration data in the presence of glucose revealed that these ligands bind competitively to the enzyme, probably at the same site. The results of a stopped-flow kinetic study are consistent with the following two-step mechanism: (formula; see text) which indicates that gluconolactone (L) and the enzyme (E) transiently form a loosely bound complex, ELtr (k-1/k+1 = 4.5 mM), in the first rapid bimolecular association step, and ELtr is converted into a more tightly bound complex EL (k+2 = 94 s-1, k-2 = 0.36 s-1) in the subsequent slow unimolecular process. The fluorescence intensity increase occurs solely in the latter step.     

Pre-steady-state and stopped-flow fluorescence analysis of Escherichia coli ribonuclease III: insights into mechanism and conformational changes associated with binding and catalysis

To better understand substrate recognition and catalysis by RNase III, we examined steady-state and pre-steady-state reaction kinetics, and changes in intrinsic enzyme fluorescence. The multiple turnover cleavage of a model RNA substrate shows a pre-steady-state burst of product formation followed by a slower phase, indicating that the steady-state reaction rate is not limited by substrate cleavage. RNase III catalyzed hydrolysis is slower at low pH, permitting the use of pre-steady-state kinetics to measure the dissociation constant for formation of the enzyme-substrate complex (K(d)=5.4(+/-0.6) nM), and the rate constant for phosphodiester bond cleavage (k(c)=1.160(+/-0.001) min(-1), pH 5.4). Isotope incorporation analysis shows that a single solvent oxygen atom is incorporated into the 5' phosphate of the RNA product, which demonstrates that the cleavage step is irreversible. Analysis of the pH dependence of the single turnover rate constant, k(c), fits best to a model for two or more titratable groups with pK(a) of ca 5.6, suggesting a role for conserved acidic residues in catalysis. Additionally, we find that k(c) is dependent on the pK(a) value of the hydrated divalent metal ion included in the reaction, providing evidence for participation of a metal ion hydroxide in catalysis, potentially in developing the nucleophile for the hydrolysis reaction. In order to assess whether conformational changes also contribute to the enzyme mechanism, we monitored intrinsic tryptophan fluorescence. During a single round of binding and cleavage by the enzyme we detect a biphasic change in fluorescence. The rate of the initial increase in fluorescence was dependent on substrate concentration yielding a second-order rate constant of 1.0(+/-0.1)x10(8) M(-1) s(-1), while the rate constant of the second phase was concentration independent (6.4(+/-0.8) s(-1); pH 7.3). These data, together with the unique dependence of each phase on divalent metal ion identity and pH, support the hypothesis that the two fluorescence transitions, which we attribute to conformational changes, correlate with substrate binding and catalysis.     

Slow conformational changes of a Neurospora glutamate dehydrogenase studied by protein fluorescence

1. The NADP-dependent glutamate dehydrogenase of Neurospora crassa undergoes slow reversible structural transitions, with half-times in the order of a few minutes, between active and inactive states. The inactive state of the enzyme, which predominates at pH values below 7.0, has an intrinsic tryptophan fluorescence 25% lower than that of the active state, which predominates at pH values above 7.6. The inactive state can be activated either by an increase in pH or by addition of activators such as succinate. 2. The kinetics of the slow transitions that follow activating and inactivating rapid changes in conditions have been monitored by measurements of protein fluorescence. The results show that the slow reversible conformational change detected by the change in fluorescence is the rate-limiting process for enzyme activation and inactivation. 3. In both directions this conformational change follows apparent first-order kinetics and the rate constant is independent of protein concentration. These kinetics and published measurements of molecular weight are indicative of an isomerization process. 4. In both directions the changes show a large energy of activation and a large positive entropy of activation, consistent with a considerable disturbance of conformation in the transition state. 5. Comparisons of the fluorescence emission spectra of the active and inactive states indicate that the difference in fluorescence is produced by quenching, possibly intramolecular, in the inactive conformation. Iodide ions cause similar quenching. 6. In some mutationally altered forms of the enzyme comparable but modified conformational changes can be followed by protein fluorescence.     

The pH dependence of serpin-proteinase complex dissociation reveals a mechanism of complex stabilization involving inactive and active conformational states of the proteinase which are perturbable by calcium

Serpin family protein proteinase inhibitors trap proteinases at the acyl-intermediate stage of cleavage of the serpin as a proteinase substrate by undergoing a dramatic conformational change, which is thought to distort the proteinase active site and slow deacylation. To investigate the extent to which proteinase catalytic function is defective in the serpin-proteinase complex, we compared the pH dependence of dissociation of several serpin-proteinase acyl-complexes with that of normal guanidinobenzoyl-proteinase acyl-intermediate complexes. Whereas the apparent rate constant for dissociation of guanidinobenzoyl-proteinase complexes (k(diss, app)) showed a pH dependence characteristic of His-57 catalysis of complex deacylation, the pH dependence of k(diss, app) for the serpin-proteinase complexes showed no evidence for His-57 involvement in complex deacylation and was instead characteristic of a hydroxide-mediated deacylation similar to that observed for the hydrolysis of tosylarginine methyl ester. Hydroxylamine enhanced the rate of serpin-proteinase complex dissociation but with a rate constant for nucleophilic attack on the acyl bond several orders of magnitude slower than that of hydroxide, implying limited accessibility of the acyl bond in the complex. The addition of 10-100 mm Ca(2+) ions stimulated up to 80-fold the dissociation rate constant of several serpin-trypsin complexes in a saturable manner at neutral pH and altered the pH dependence to a pattern characteristic of His-57-catalyzed complex deacylation. These results support a mechanism of kinetic stabilization of serpin-proteinase complexes wherein the complex is trapped as an acyl-intermediate by a serpin conformational change-induced inactivation of the proteinase catalytic function, but suggest that the inactive proteinase conformation in the complex is in equilibrium with an active proteinase conformation that can be stabilized by the preferential binding of an allosteric ligand such as Ca(2+).     

Kinetic study of lipoxygenase-hydroperoxylinoleic acid interaction.

Interaction of lipoxygenase with hydroperoxylinoleic acid, which is the product of this enzyme reaction and acts as an activator, was studied kinetically by the fluorescence stopped-flow method. The kinetic features are consistent with a two-step mechanism involving a fast bimolecular association process followed by a slow unimolecular process. The dissociation constant of the bimolecular process was 3 (+/-2) - 10(-5) M, which was appreciably dependent on temperature and pH, in contrast to the rate constant of the latter process. The enthalpy and the entropy of activation for the unimolecular process were estimated to be 21 kcal/mol and 20 e.u., respectively. The pH dependence of the rate constant indicated that an ionizable group with pK of about 8.6 is involved in the interaction. Linoleic acid, the substrate of lipoxygenase, and oleic acid inhibited the interaction between the lipoxygenase and the hydroperoxylinoleic acid by reducing the rate. A series of saturated monohydric alcohols also reduced the rate of the interaction as the chain length of the alcohols increases, though methanol and ethanol increased the rate of the interaction.     

Viscosity dependence of the solute quenching of the tryptophanyl fluorescence of proteins

We have studied the viscosity dependence of the acrylamide quenching of the fluorescence on the internal tryptophan residues in cod parvalbumin and ribonuclease T1, as well as the model systems. N-acetyl-L-tryptophanamide and glucagon. For the latter systems, the apparent rate constant, kq(app), for acrylamide quenching shows a typical diffusion-limited behavior. For parvalbumin and ribonuclease T1, however, the viscosity dependence of kq(app) is quite different. There is little change in the kq(app) values on increasing the bulk viscosity from 1 to 10 cP (by addition of glycerol), but a further increase from 10 to 100 cP results in a significant reduction in the kq(app). Both an unfolding mechanism and a quencher penetration mechanism are considered to explain the results. Only the penetration mechanism is found to be consistent, and our data are interpreted as indicating that the rate-limiting step for quenching goes from being that of diffusion through the protein matrix, at low viscosity, to diffusion through the bulk solvent, at high viscosity. By also considering the Kramers' relationship in fitting our data, we are able to obtain insight regarding the coupling between internal fluctuations in the structure of the protein and motion of the bulk solvent. For parvalbumin and ribonuclease T1, the internal dynamics are found to be very weakly coupled to the bulk.     

Equilibrium and transient intermediates in folding of human macrophage migration inhibitory factor.

Acid, guanidinium-Cl and urea denaturations of recombinant human macrophage migration inhibitory factor (MIF) were measured using CD and fluorimetry. The acid-induced denaturation was followed by CD at 200, 222, and 278 nm and by tryptophan fluorescence. All four probes revealed an acid-denatured state below pH 3 which resembled a typical molten globule. The pH transition is not two-state as the CD data at 222 nm deviated from all other probes. Urea and guanidinium-Cl denaturations (pH 7, 25 degrees C) both gave an apparent DeltaGU app H2O of 31 +/- 3 kJ.mol-1 when extrapolated to zero denaturant concentration. However, denaturation transitions recorded by fluorescence (at the same protein concentration) occurred at lower urea or guanidinium-Cl concentrations, consistent with an intermediate in the course of MIF denaturation. CD at 222 nm was not very sensitive to protein concentration (in 10-fold range) even though size-exclusion chromatogryphy (SEC) revealed a dimer-monomer dissociation prior to MIF unfolding. Refolding experiments were performed starting from acid, guanidinium-Cl and urea-denatured states. The kinetics were multiphasic with at least two folding intermediates. The intrinsic rate constant of the main folding phase was 5.0 +/- 0.5 s-1 (36.6 degrees C, pH 7) and its energy of activation 155 +/- 12 kJ.mol-1.     

Equilibrium and kinetic studies of oxygen binding to the haemocyanin from the freshwater snail Lymnaea stagnalis.

The binding of oxygen by the haemocyanin of the gastropod Lymnaea stagnalis was studied by equilibrium and kinetic methods. The studies were performed under conditions in which the haemocyanin molecule was in the native state. Over the pH range 6.8-7.6, in the presence of 10mM-CaCl2 the haemocyanin bound O2 cooperatively. Over this pH range the haemocyanin molecule displayed a normal Bohr effect whereby the O2 affinity of the molecule decreased with a fall in the pH of the solution. The maximum slope of the Hill plot (hmax.) was 3.5, obtained at pH 7.5. An increase in the CaCl2 concentration from 5 to 20 mM at pH 6.8 resulted in a slight increase in the oxygen affinity, with hmax. remaining virtually unchanged. At constant pH and CaCl2 concentration, an increase in NaCl concentration from 0 to 50 mM resulted in a small decrease in O2 affinity, but a significant increase in the value of hmax. from 3.5 to 8.6. Temperature-jump relaxation experiments over a range of O2 concentrations produced single relaxation times. The dependence of the relaxation time on the reactant concentrations indicated a simple bimolecular binding process. The calculated association and dissociation rate constants for this process at pH 7.5 are 29.5 X 10(6) M-1 X S-1 and 49 S-1 respectively. The association rate constant kon was found to be essentially independent of pH and CaCl2 concentration. The dissociation rate constant, koff, however, increased with a decrease in the pH, but was also independent of CaCl2 concentration. These results indicate that the stability of the haemocyanin-O2 complex is determined by the dissociation rate constant.