Tuning multi/pluri-potent stem cell fate by electrospun poly(L-lactic acid)-calcium-deficient hydroxyapatite nanocomposite mats

In this study, we investigated whether multipotent (human-bone-marrow-derived mesenchymal stem cells [hBM-MSCs]) and pluripotent stem cells (murine-induced pluripotent stem cells [iPSCs] and murine embryonic stem cells [ESCs]) respond to nanocomposite fibrous mats of poly(L-lactic acid) (PLLA) loaded with 1 or 8 wt % of calcium-deficient nanohydroxyapatite (d-HAp). Remarkably, the dispersion of different amounts of d-HAp to PLLA produced a set of materials (PLLA/d-HAp) with similar architectures and tunable mechanical properties. After 3 weeks of culture in the absence of soluble osteogenic factors, we observed the expression of osteogenic markers, including the deposition of bone matrix proteins, in multi/pluripotent cells only grown on PLLA/d-HAp nanocomposites, whereas the osteogenic differentiation was absent on stem-cell-neat PLLA cultures. Interestingly, this phenomenon was confined only in hBM-MSCs, murine iPSCs, and ESCs grown on direct contact with the PLLA/d-HAp mats. Altogether, these results indicate that the osteogenic differentiation effect of these electrospun PLLA/d-HAp nanocomposites was independent of the stem cell type and highlight the direct interaction of stem cell-polymeric nanocomposite and the mechanical properties acquired by the PLLA/d-HAp nanocomposites as key steps for the differentiation process.     

Structural study of poly(L-lactic acid) spherulites

Spherulites of poly(L-lactic acid) (PLLA) and of its blends with atactic poly(3-hydroxybutyrate) (a-PHB, from 10 to 75 wt %) were investigated by microfocus X-ray diffraction using synchrotron radiation. Radial scans in 5 microm steps with 3 microm beam diameter were performed. In PLLA, tens of identical diffraction images were collected. The unit cell a-axis was radially oriented, and the other axes lacked any specific orientation. In contrast, all PLLA/a-PHB blends showed a periodic change of diffraction pattern with increasing distance from the spherulite center. In all cases, the a-axis lay along the radius, while the b- and c-axes rotated about a with a defined periodicity. The unit cell twisting frequency increased with a-PHB content and closely matched the band spacing observed by polarized optical microscopy, which changed from 250 to 60 microm when the amount of a-PHB increased from 10 to 75 wt %. Concomitantly, a gradual broadening of all X-ray reflections was observed.     

Layered open pore poly(L-lactic acid) nanomorphology

This paper reports on specific open and interconnected CO(2) foams of poly(L-lactic acid). The effect of varying gas concentration and hence physical changes induced by CO(2) has been investigated and thus used to generate specific structures. The developed morphologies have a skin core structure with larger pores in the core and open and interconnected smaller pores in the skin.     

Highly sensitive chemiluminescence immunoassay on chitosan membrane modified paper platform using TiO2 nanoparticles/multiwalled carbon nanotubes as label

A highly sensitive chemiluminescence (CL) immunoassay was incorporated into a low‐cost microfluidic paper‐based analytical device (μ‐PAD) to fabricate a facile paper‐based CL immunodevice (denoted as μ‐PCLI). This μ‐PCLI was constructed by covalently immobilizing capture antibody on a chitosan membrane modified μ‐PADs, which was developed by simple wax printing methodology. TiO₂ nanoparticles coated multiwalled carbon nanotubes (TiO₂/MWCNTs) were synthesized as an amplification catalyst tag to label signal antibody (Ab₂). After sandwich‐type immunoreactions, the TiO₂/MWCNTs were captured on the surface of μ‐PADs to catalyze the luminol‐p‐iodophenol‐H₂O₂ CL system, which produced an enhanced CL emission. Using prostate‐specific antigen as a model analyte, the approach provided a good linear response range from 0.001 to 20 ng/mL with a low detection limit of 0.8 pg/mL under optimal conditions. This μ‐PCLI showed good reproducibility, selectivity and stability. The assay results of prostate‐specific antigen in clinical serum samples were in good agreement with that obtained by commercially used electrochemiluminescence methods at the Cancer Research Center of Shandong Tumor Hospital (Jinan, Shandong Province, China). This μ‐PCLI could be very useful to realize highly sensitive, qualitative point‐of‐care testing in developing or developed countries. Copyright © 2013 John Wiley & Sons, Ltd.     

Electrochemical DNA biosensor based on silver nanoparticles/poly(3-(3-pyridyl) acrylic acid)/carbon nanotubes modified electrode

In this work, we present an electrochemical DNA sensor based on silver nanoparticles/poly(trans-3-(3-pyridyl) acrylic acid) (PPAA)/multiwalled carbon nanotubes with carboxyl groups (MWCNTs-COOH) modified glassy carbon electrode (GCE). The polymer film was electropolymerized onto MWCNTs-COOH modified electrode by cyclic voltammetry (CV), and then silver nanoparticles were electrodeposited on the surface of PPAA/MWCNTs-COOH composite film. Thiol group end single-stranded DNA (HS-ssDNA) probe was easily covalently linked onto the surface of silver nanoparticles through a 5′ thiol linker. The DNA hybridization events were monitored based on the signal of the intercalated adriamycin by differential pulse voltammetry (DPV). Based on the response of adriamycin, only the complementary oligonucleotides gave an obvious current signal compared with the three-base mismatched and noncomplementary oligonucleotides. Under the optimal conditions, the increase of reduction peak current of adriamycin was linear with the logarithm of the concentration of the complementary oligonucleotides from 9.0 × 10⁻¹² to 9.0 × 10⁻⁹ M with a detection limit of 3.2 × 10⁻¹² M. In addition, this DNA sensor exhibited an excellent reproducibility and stability during DNA hybridization assay.     

Amperometric choline biosensor based on multiwalled carbon nanotubes/zirconium oxide nanoparticles electrodeposited on glassy carbon electrode

Perturbation of the tubulin/microtubule dynamic in cells is perhaps the single most important mode of action of anticancer drugs. Standard methods for identifying and evaluating compounds for their ability to alter tubulin polymerization are low throughput, labor intensive, expensive, or make their assessment in vitro. Here we report a method to rapidly quantify the extent of tubulin polymerization in whole cells using flow cytometry, and we use this technique to evaluate compounds that stabilize and destabilize microtubule formation. This facile method is useful for conveniently, quantitatively, and cost-effectively comparing small molecules that perturb tubulin polymerization.     

Covalent immobilization of redox enzyme on electrospun nonwoven poly(acrylonitrile-co-acrylic acid) nanofiber mesh filled with carbon nanotubes: a comprehensive study

In this work, novel conductive composite nanofiber mesh possessing reactive groups was electrospun from solutions containing poly(acrylonitrile-co-acrylic acid) (PANCAA) and multi-walled carbon nanotubes (MWCNTs) for redoxase immobilization, assuming that the incorporated MWCNTs could behave as electrons transferor during enzyme catalysis. The covalent immobilization of catalase from bovine liver on the neat PANCAA nanofiber mesh or the composite one was processed in the presence of EDC/NHS. Results indicated that both the amount and activity retention of bound catalase on the composite nanofiber mesh were higher than those on the neat PANCAA nanofiber mesh, and the activity increased up to 42%. Kinetic parameters, K(m) and V(max), for the catalases immobilized on the composite nanofiber mesh were lower and higher than those on the neat one, respectively. This enhanced activity might be ascribed to either promoted electron transfer through charge-transfer complexes and the pi system of carbon nanotubes or rendered biocompatibility by modified MWCNTs. Furthermore, the immobilized catalases revealed much more stability after MWCNTs were incorporated into the polymer nanofiber mesh. However, there was no significant difference in optimum pH value and temperature, thermal stability and operational stability between these two immobilized preparations, while the two ones appeared more advantageous than the free in these properties. The effect of MWCNTs incorporation on another redox enzyme, peroxidase, was also studied and it was found that the activity increased by 68% in comparison of composite one with neat preparation.     

Studies on the oridonin-loaded poly(D,L-lactic acid) nanoparticles in vitro and in vivo

The purpose of this paper was to investigate the possibility of developing a polymeric nanoparticle delivery system for ORI to increase its solubility, blood circulation time and tissue targeting. Oridonin-loaded poly(D,L-lactic acid) nanoparticles (ORI-PLA-NP) were prepared by the further modified spontaneous emulsion solvent diffusion (MSESD) method. Studies were carried out to characterize and evaluate the produced ORI-PLA-NP both in vitro and in vivo. The experimental results showed that the mean size of the nanoparticles were 137.3 nm, with 87.2% of the nanoparticles distributed between the range of 107 and 195 nm. The entrapment efficiency and actual drug loading of the nanoparticles were 91.88+/-1.83 and 2.32+/-0.05%, respectively. It was demonstrated by differential scanning calorimetry (DSC) and X-ray diffractometry (XRD) that ORI existed in the form of amorphous in the nanoparticles. The in vitro release profile of ORI-PLA-NP could be expressed well by the Higuchi equation: Q=8.944t(1/2)+11.246. The results of pharmacokinetics demonstrated that being encapsulated in PLA nanoparticles was remarkably effective for ORI to prolong its blood circulation time. After the i.v. administration of ORI-PLA-NP, we could observe a stable and high concentration of ORI in liver, lung and spleen, while its distribution in heart and kidney decreased.     

Surface modification of poly(L-lactic acid) membrane via layer-by-layer assembly of silver nanoparticle-embedded polyelectrolyte multilayer

The improvement of hydrophilicity, antibacterial activity, hemocompatibility, and cytocompatibility of poly(L-lactic acid) (PLLA) membrane was developed via polyelectrolyte multilayer (PEM) immobilization. Colloidal silver nanoparticles were prepared by using dextran sulfate (DS) as a stabilizer to precede chemical reduction by dextrose. The polysaccharide PEMs, including chitosan (CH) and dextran sulfate (DS)-stabilized silver nanosized colloid (DSS), were successfully deposited on the aminolyzed PLLA membrane in a layer-by-layer (LBL) self-assembly manner. The obtained results showed that the contact angle of PLLA membranes decreased with PEMs grafting layers and reached a steady value after four bilayers of coating, hence suggesting that full coverage was achieved. The PLLA-PEM membranes with DSS as the outermost layer could resist platelet adhesion and human plasma fibrinogen (HPF) adsorption, while prolonging the blood coagulation time. The PLLA-PEM membranes could possess antibacterial activity against Methicilin-resistant Staphylococus aureus (MRSA). In addition, the proliferation and viability of human endothelial cells (ECs) on PLLA-PEM membranes could be significantly improved. Overall results demonstrated that such a fast, easy processing and shape-independent method for an antithrombogenic coating can be used for applications in hemodialysis devices.     

Characteristic chain-end racemization behavior during photolysis of poly(L-lactic acid)

Photolysis of poly(L-lactic acid) (PLLA) has many unclear points, such as the degradation mechanism, kinetics, products, and racemization mechanism. To clarify these features of PLLA photolysis, we examined the relationship between photolysis and racemization. The hexad stereosequential analysis of photodegraded PLLA was investigated to specify the racemized positions within a chain in comparison with hydrolysis and thermal degradation. Results from (13)C NMR spectra of UV-irradiated PLLA samples indicated that the samples have racemized d-lactate units at chain ends. From the comparison of racemization behavior among photolysis, hydrolysis, and thermal degradation, it was confirmed that the preferential racemization behavior of each of these three degradation processes is characteristic and distinct, being identified as chain-end racemization, poor racemization, or internal-unit racemization, respectively. The characteristic chain-end racemization behavior of photolysis was first confirmed in this study.     

Grafting of cellulose fibers with poly(epsilon-caprolactone) and poly(L-lactic acid) via ring-opening polymerization

In this study, ring-opening polymerization (ROP) of epsilon-caprolactone (epsilon-CL) and L-lactide (L-LA) has been performed from cellulose fibers. The hydroxyl groups on cellulose act as initiators in the polymerization, and the polymers are covalently bonded to the cellulose fiber. As an attempt to introduce more available hydroxyl groups on the surface, and thereby obtain higher grafting efficiency in the ROP of epsilon-CL and L-LA, unmodified paper was modified with xyloglucan-bis(methylol)-2-methylpropanamide (XG-bis-MPA) and 2,2-bis(methylol)propionic acid (bis-MPA), respectively. The grafted substrates were characterized via Fourier transform infrared spectroscopy (FTIR), contact angle measurement, atomic force microscopy, and enzymatic degradation. The results showed a successful grafting of poly(epsilon-caprolactone) (PCL) and poly(L-lactic acid) (PLLA) from the cellulose fiber surfaces. Furthermore, the results showed an improved grafting efficiency after activation of the cellulose surface with bis-MPA, and showed that the amount of grafted polymer could be controlled by the ratio of added free initiator to monomer.     

Holmium-loaded poly(L-lactic acid) microspheres: in vitro degradation study

The clinical application of holmium-loaded poly(L-lactic acid) (PLLA) microspheres for the radionuclide treatment of liver malignancies requires in depth understanding of the degradation characteristics of the microspheres. To this end, an in-vitro degradation study was conducted. PLLA-microspheres with and without HoAcAc loading, and before and after neutron or gamma irradiation, were incubated in a phosphate buffer at 37 degrees C for 12 months. In contrast with the other microsphere formulations, only the neutron-irradiated Ho-PLLA-MS disintegrated. At the end of the experiment (52 weeks) highly crystalline fragments, as evidenced from Differential Scanning Calorimetry, were present. Infrared spectroscopy showed that these fragments consisted of holmium lactate. In conclusion, this study demonstrates that the degradation of neutron-irradiated Ho-PLLA-MS was substantially accelerated by the HoAcAc incorporation and subsequent neutron irradiation. The degradation of these microspheres in aqueous solution resulted in the formation of insoluble holmium lactate microcrystals without release of Ho3+.     

Fibroblast response is enhanced by poly(L-lactic acid) nanotopography edge density and proximity

The development of scaffolds for use in tissue engineering applications requires careful choice of macroscale properties, such as mechanical characteristics, porosity and biodegradation. The micro- and nano-scale properties of the scaffold surface are also an important design criterion as these influence cell adhesion, proliferation, and differentiation. The cellular response is known to be affected by surface topography but the mechanisms governing this remain unclear. Homogenous poly(L-lactic acid) was textured with surface nanotopographies by two-stage replication molding of heterogeneous demixed polymer films. Initial cell adhesion was improved on nanotextured surfaces compared with smooth controls, but subsequent cell density was significantly reduced on the roughest surfaces. Improvements in cell response were found to correlate with focal contact and actin microfilament development. Cell response was found to trend both with the surface density of topography edges and with inter-topography spacing, indicating possible roles for edges stimulating cell adhesion/proliferation or for spacing to modulate the ability of integrin-ligand bonds to cluster and form focal adhesions. This study furthers understanding of the geometric properties of surface nanotopographies that affect cellular response. It is hoped that identification of the mechanisms governing cell-topography interactions will allow rule-based design of biomaterial surface to engineer specific cellular responses.     

Fabrication of polyphenol biosensor based on laccase immobilized on copper nanoparticles/chitosan/multiwalled carbon nanotubes/polyaniline-modified gold electrode

A high-performance amperometric polyphenol biosensor was developed, based on covalent immobilization of Ganoderma sp. laccase onto copper nanoparticles (CuNP's)/chitosan (CHIT)/carboxylated multiwalled carbon nanotube (cMWCNT)/polyaniline (PANI)-modified gold (Au) electrode. The CuNP's and cMWCNT had a synergistic electrocatalytic effect in the matrix of CHIT. The biosensor showed optimum response at pH 6.0 (0.1 M acetate buffer) and 35 °C, when operated at 50 mV s⁻¹. The biosensor exhibited excellent sensitivity (the detection limit was down to 0.156 μM for guaiacol), fast response time (less than 4 s) and wide linear range (from 1 to 500 μM). Analytical recovery of added guaiacol was 96.40-98.46%. Within batch and between batch coefficients of variation were <2.6% and <5.3%, respectively. The enzyme electrode was used 300 times over a period of 7 months, when stored at 4 °C.     

Thermogelling aqueous solutions of alternating multiblock copolymers of poly(L-lactic acid) and poly(ethylene glycol)

We are reporting alternating multiblock copolymers of poly(L-lactic acid)/poly(ethylene glycol) aqueous solution (> 15 wt %) undergoing sol-gel-sol transition as the temperature increases from 20 to 60 degrees C. Micelles of the multiblock copolymers (in water) are about 20 nm in radius at low temperature. They are aggregated to a larger size as the temperature increases, which should play a critical role in the sol-to-gel transition. The transition temperature and gel window were affected by the molecular weight and composition of the multiblock copolymer. In particular, the aqueous solution of an alternating multiblock copolymer (Mn approximately 6700 daltons) prepared from poly(ethylene glycol) (Mn approximately 600 daltons) and poly(L-lactic acid) (Mn approximately 1300 daltons) showed a maximum modulus at body temperature (37 degrees C). The in situ gel forming ability of the polymer aqueous solution in vivo as well as in vitro indicates that it can be a promising injectable biomaterial.     

Electrically conductive bacterial cellulose by incorporation of carbon nanotubes

Electrically conducting polymeric membranes were prepared by incorporating multiwalled carbon nanotubes (MWCNTs) into bacterial cellulose pellicles produced by Gluconacetobacter xylinum. The MWCNTs were dispersed in a surfactant (cationic cetyl trimethylammonium bromide) solution, and cellulose pellicles were dipped into the solution for 6, 12, and 24 h. The surfactants were then extracted in pure water and dried. Electron microscopy showed that the individual MWCNTs were strongly adhered to the surface and the inside of the cellulose pellicle. The conductivity of the MWCNTs-incorporated cellulose pellicle, as measured by a four-probe at room temperature, was 1.4 x 10(-1) S/cm, based on the total cross-sectional area (approximately 9.6 wt % of MWCNTs). This suggests that the MWCNTs were incorporated uniformly and densely into the pellicles.     

FT-IR imaging spectroscopy of phase separation in blends of poly(3-hydroxybutyrate) with poly(L-lactic acid) and poly(epsilon-caprolactone)

The detection of phase separation and identification of miscibility in biopolymer blends is an important aspect for the improvement of their physical properties. In this article, the phase separation in blends of poly(3-hydroxybutyrate) (PHB) with poly(L-lactic acid) (PLA) and poly(epsilon-caprolactone) (PCL), respectively, has been studied as a function of the blend composition by FT-IR imaging spectroscopy. For both polymer blend systems, a miscibility gap has been found around the 50:50% (w/w) composition of the two components. Furthermore, the separating phases have been identified as blends of the two polymer components and their compositions could be determined from calibrations based on the spectra of the blends in the compositional range of miscibility. The data derived from FT-IR spectroscopic imaging were corroborated by additional DSC analyses and mechanical stress-strain measurements of polymer blend films, which exhibited a characteristic fracture behavior as a function of PHB composition.     

Towards bioinspired superhydrophobic poly(L-lactic acid) surfaces using phase inversion-based methods

The water repellency and self-cleaning ability of many biological surfaces has inspired many fundamental and practical studies related to the development of synthetic superhydrophobic surfaces. However, the investigation of such substrates made of biodegradable polymers has been scarce. Simple approaches based on a single step, performed at room temperature (and pressure), were implemented to obtain superhydrophobic poly(L-lactic acid) (PLLA) surfaces via phase inversion-based methods, without addition of low-surface-energy compounds. Water contact angles above 150 degrees were obtained using some processing conditions. In such cases scanning electronic microscopy micrographs of such surfaces revealed a clear rough texture composed by leafy clusters with micro-nano binary structures. Such materials could be used in specific environmental and biomedical applications, namely in implantable materials or in antibacterial or antithrombogenic surfaces.     

Effect of solution pH and ionic strength on the stability of poly(acrylic acid)-encapsulated multiwalled carbon nanotubes aqueous dispersion and its application for NADH sensor

The optimal conditions to prepare water-soluble, stable poly(acrylic acid)-wrapped multiwalled carbon nanotubes (PAA-MWNTs) complex is presented. PAA-MWNTs shows high stability within weak acid to weak basic pH condition. The complex also shows good endurance to moderate ionic strengths in the buffer solution. The PAA-MWNTs complex film-covered electrode demonstrates stable, excellent electrocatalytic activity to oxidize NADH, which makes it possible to prepare NADH sensor at a low potential of approximately 0.13 V (versus Ag/AgCl) with the linear range of 4-100 microM by differential pulse voltammetry.