Molecular characterization of a protease secreted by Erwinia amylovora.

A protease with a molecular mass of 48 kDa is secreted by the fire blight pathogen Erwinia amylovora in minimal medium. We characterized this activity as a metalloprotease, since the enzyme was inhibited by EDTA and o -phenanthroline. A gene cluster was determined to encode four genes connected to protease expression, including a structural gene (prtA) and three genes (prtD, prtE, prtF) for secretion of the protease, which are transcribed in the same direction. The organization of the protease gene cluster in E. amylovora is different from that in other Gram-negative bacteria, such as Erwinia chrysanthemi, Pseudomonas aeruginosa and Serratia marcescens. On the basis of the conservative motif of metalloproteases, PrtA was identified to be a member of the metzincin subfamily of zinc-binding metalloproteases, and was confirmed to be the 48 kDa protease on gels by sequencing of tryptic peptide fragments derived from the protein. The protease is apparently secreted into the external medium through the type I secretion pathway via PrtD, PrtE and PrtF which share more than 90% identity with the secretion apparatus for lipase of S. marcescens. A protease mutant was created by Tn 5 -insertions, and the mutation localized in the prtD gene. The lack of protease reduced colonization of an E. amylovora secretion mutant labelled with the gene for the green fluorescent protein (gfp) in the parenchyma of apple leaves.     

Pseudomonas aeruginosa alkaline protease: evidence for secretion genes and study of secretion mechanism.

A 6.5-kb DNA fragment carrying the functions required for specific secretion of the extracellular alkaline protease produced by Pseudomonas aeruginosa was cloned. The whole 6.5-kb DNA fragment was transcribed in one direction and probably carried three genes involved in secretion. The expression in trans of these genes, together with the apr gene, in Escherichia coli allowed synthesis and secretion of the alkaline protease, which was extensively investigated by performing pulse-chase experiments under various conditions. We demonstrated the absence of a precursor form, as well as the independence of alkaline protease translocation from SecA. The absence of secretion genes impaired alkaline protease secretion; the protein then remained intracellular and was partially degraded.     

The Aeromonas hydrophila exeE gene, required both for protein secretion and normal outer membrane biogenesis, is a member of a general secretion pathway

The Aeromonas hydrophila Tn5-751 insertion mutant L1.97 is unable to secrete extracellular proteins, and is fragile because of defective assembly of its outer membrane. A KpnI 4.1 kb fragment, which complements this mutant when supplied with an exogenous promoter, was isolated and sequenced. It contains two complete genes, exeE and exeF, plus fragments of two others and may form part of an operon. The exeE and exeF open reading frames encode 501-residue M(r) 55,882 and 388-residue M(r) 43,431 proteins, respectively. These genes were expressed in vitro and their initiation codons verified by deletion analysis. Tn5-751 had inserted near the centre of the exeE gene in the L1.97 strain. Subclones of the KpnI 4.1 kb fragment which contained only the exeE gene fully complemented the mutation, indicating that its function is required both for extracellular secretion and outer membrane assembly. ExeE and ExeF are highly similar to other proteins which have been shown to be involved in extracellular secretion, suggesting that an additional export apparatus beyond that required for inner membrane translocation may be part of the physiology of many Gram-negative bacteria.     

Protein secretion in gram-negative bacteria. The extracellular metalloprotease B from Erwinia chrysanthemi contains a C-terminal secretion signal analogous to that of Escherichia coli alpha-hemolysin

The secretion signal of extracellular metalloprotease B that is secreted without a signal peptide by the Gram-negative phytopathogenic bacterium Erwinia chrysanthemi is shown by deletion and gene fusion analyses to be located within the last 40 C-terminal amino acids. Secretion of a peptide containing only this region of the protease requires the same three secretion factors (PrtD, PrtE, and PrtF) that were previously shown to be required for the secretion of the full-length protease. This secretion signal can also be recognized, albeit inefficiently, by the analogous secretion machinery of alpha-hemolysin, another protein with a C-terminal secretion signal that is secreted by some strains of the Gram-negative bacterium Escherichia coli. The secretion signal was fused to an internal 200-amino acid fragment from the sequence of the cytoplasmic protein amylomaltase to promote its specific secretion by the protease secretion pathway. Almost exactly the same sequence as that identified as the protease B secretion signal was also found at the C terminus of metalloprotease C that is also secreted by E. chrysanthemi.     

Protein secretion in gram-negative bacteria: transport across the outer membrane involves common mechanisms in different bacteria.

The xcp genes are required for protein secretion by Pseudomonas aeruginosa. They are involved in the second step of the process, i.e. the translocation across the outer membrane, after the exoproteins have reached the periplasm in a signal peptide dependent fashion. The nucleotide sequence of a 2.5 kb DNA fragment containing xcp genes showed at least two complete open reading frames, potentially encoding proteins with molecular weights of 41 and 19 kd. Products with these apparent molecular weights were identified after expression of the DNA fragment in vitro and in vivo. Subcloning and complementation experiments showed that both proteins are required for secretion. The two products are located in the inner membrane and share highly significant homologies with the PulL and PulM proteins which are required for the specific secretion of pullulanase in Klebsiella pneumoniae. These homologies reveal the existence of a common mechanism for protein secretion in Pseudomonas aeruginosa and Klebsiella pneumoniae.     

General secretion pathway (eps) genes required for toxin secretion and outer membrane biogenesis in Vibrio cholerae.

The general secretion pathway (GSP) of Vibrio cholerae is required for secretion of proteins including chitinase, enterotoxin, and protease through the outer membrane. In this study, we report the cloning and sequencing of a DNA fragment from V. cholerae, containing 12 open reading frames, epsC to -N, which are similar to GSP genes of Aeromonas, Erwinia, Klebsiella, Pseudomonas, and Xanthomonas spp. In addition to the two previously described genes, epsE and epsM (M. Sandkvist, V. Morales, and M. Bagdasarian, Gene 123: 81-86, 1993; L. J. Overbye, M. Sandkvist, and M. Bagdasarian, Gene 132:101-106, 1993), it is shown here that epsC, epsF, epsG, and epsL also encode proteins essential for GSP function. Mutations in the eps genes result in aberrant outer membrane protein profiles, which indicates that the GSP, or at least some of its components, is required not only for secretion of soluble proteins but also for proper outer membrane assembly. Several of the Eps proteins have been identified by use of the T7 polymerase-promoter system in Escherichia coli. One of them, a pilin-like protein, EpsG, was analyzed also in V. cholerae and found to migrate as two bands on polyacrylamide gels, suggesting that in this organism it might be processed or otherwise modified by a prepilin peptidase. We believe that TcpJ prepilin peptidase, which processes the subunit of the toxin-coregulated pilus, TcpA, is not involved in this event. This is supported by the observations that apparent processing of EpsG occurs in a tcpJ mutant of V. cholerae and that, when coexpressed in E. coli, TcpJ cannot process EpsG although the PilD peptidase from Neisseria gonorrhoeae can.     

Characterization of Erwinia chrysanthemi extracellular proteases: cloning and expression of the protease genes in Escherichia coli.

Erwinia chrysanthemi, a phytopathogenic enterobacterium, secretes three antigenically and structurally distinct proteases, A, B, and C and produces a protease inhibitor, a low-molecular-weight, heat-stable protein which remains mostly intracellular and which binds specifically to the A, B, and C proteases. The structural genes for proteases A, B, and C and for the inhibitor are clustered on a ca. 40-kilobase DNA fragment present in cosmid pEW4. Escherichia coli strains harboring pEW4 secrete the three proteases into the medium during the exponential phase of growth, without intracellular accumulation and in the absence of detectable cell lysis. An 8.5-kilobase EcoRI fragment derived from the cosmid encodes proteases B and C and the inhibitor as well as functions involved in the synthesis or secretion (or both) of the proteases. The inhibitor is not required for protease synthesis or secretion.     

Five genes at the 3' end of the Klebsiella pneumoniae pulC operon are required for pullulanase secretion

The nucleotide sequence of a 5082bp fragment of chromosomal DNA from Klebsiella pneumoniae strain UNF5023 is reported. The sequence includes the last four genes of an operon of genes specifically required for the secretion of the enzyme pullulanase. All four genes (puIL, puIM, puIN and puIO) are shown to be required for pullulanase secretion, as is a fifth gene (puIK) which extends beyond the 5′ end of the sequenced DNA. The products of the puIL, puIM, puIN and puIO genes (44kD, 18kD, 27kD and 24kD, respectively) are all predicted to have one or more hydrophobic domains typical of signal sequences and/or membrane anchors, and were all found mainly associated with the inner membranes of subfractionated cells in which the corresponding genes had been expressed from the bacteriophage T7 gene 10 promoter. The results of this study increase the number of genes which have been identified as required for pullulanase secretion to eight, in addition to genes coding for components of the general export pathway.     

Protein secretion in Pseudomonas aeruginosa

Abstract The Gram-negative bacterium Pseudomonas aeruginosa secretes many proteins into the extracellular medium. At least two distinct secretion pathways can be discerned. The majority of the exoproteins are secreted via a two-step mechanism. These proteins are first translocated across the inner membrane in a signal sequence-dependent fashion. The subsequent translocation across the outer membrane requires the products of at least 12 distinct xcp genes. The exact role of one of these proteins, the XcpA protein, has been resolved. It is a peptidase that is required for the processing of the precursors of four other Xcp proteins, thus allowing their assembly into the secretion apparatus. This peptidase is also required for the processing of the precursors of type IV pili subunits. Two other Xcp proteins, XcpR and XcpS, display extensive homology to proteins involved in pili biogenesis, which suggests that the assembly of the secretion apparatus and the biogenesis of type IV pili are related processes. The secretion of alkaline protease does not require the xcp gene products. This enzyme, which is encoded by the aprA gene, is not synthesized in a precursor form with an N-terminal signal sequence. Secretion across the two membranes probably takes place in one step at adhesion zones that may be constituted by three accessory proteins, designated AprD, AprE and AprF. The two secretion pathways found in P. aeruginosa appear to habe disseminate widely among Gram-negative bacteria.     

Protein secretion in Pseudomonas aeruginosa.

The Gram-negative bacterium Pseudomonas aeruginosa secretes many proteins into the extracellular medium. At least two distinct secretion pathways can be discerned. The majority of the exoproteins are secreted via a two-step mechanism. These proteins are first translocated across the inner membrane in a signal sequence-dependent fashion. The subsequent translocation across the outer membrane requires the products of at least 12 distinct xcp genes. The exact role of one of these proteins, the XcpA protein, has been resolved. It is a peptidase that is required for the processing of the precursors of four other Xcp proteins, thus allowing their assembly into the secretion apparatus. This peptidase is also required for the processing of the precursors of type IV pili subunits. Two other Xcp proteins, XcpR and XcpS, display extensive homology to proteins involved in pili biogenesis, which suggests that the assembly of the secretion apparatus and the biogenesis of type IV pili are related processes. The secretion of alkaline protease does not require the xcp gene products. This enzyme, which is encoded by the aprA gene, is not synthesized in a precursor form with an N-terminal signal sequence. Secretion across the two membranes probably takes place in one step at adhesion zones that may be constituted by three accessory proteins, designated AprD, AprE and AprF. The two secretion pathways found in P. aeruginosa appear to have disseminated widely among Gram-negative bacteria.     

Involvement of lipopolysaccharide in the secretion of Escherichia coli α haemolysin and Erwinia chrysanthemi proteases

The presence of the α-haemolysin secretion genes sensitizes Escherichia coli to vancomycin, a glycopeptide antibiotic that is normally excluded from the Gram-negative envelope (owing to its large size) (M_r 1400). The selection of vancomycin mutants in strains carrying such genes was found to be a very powerful method for selecting non-haemolytic mutants. In this way, mutations in the known secretion genes, hlyB, hlyD and tolC, were obtained. However additional mutations mapped in genes rfaH and galU which are required for lipopolysaccharide (LPS) biosynthesis. Mutations in rfaH and galU strongly reduced α-haemolysin secretion as weli as the secretion of Erwinia chrysanthemi proteases in E. coli without affecting their synthesis. These mutations markedly lowered the content of TolC protein, required for haemolysin secretion and also of the PrtF protein necessary for protease secretion. These results raise the possibility that LPS is involved in the correct incorporation of the TolC and PrtF proteins into the cell envelope.     

The three genes lipB, lipC, and lipD involved in the extracellular secretion of the Serratia marcescens lipase which lacks an N-terminal signal peptide.

The extracellular lipase of Serratia marcescens Sr41, lacking a typical N-terminal signal sequence, is secreted via a signal peptide-independent pathway. The 20-kb SacI DNA fragment which allowed the extracellular lipase secretion was cloned from S. marcescens by selection of a phenotype conferring the extracellular lipase activity on the Escherichia coli cells. The subcloned 6.5-kb EcoRV fragment was revealed to contain three open reading frames which are composed of 588, 443, and 437 amino acid residues constituting an operon (lipBCD). Comparisons of the deduced amino acid sequences of the lipB, lipC, and lipD genes with those of the Erwinia chrysanthemi prtDEC, prtEEC, and prtFEC genes encoding the secretion apparatus of the E. chrysanthemi protease showed 55, 46, and 42% identity, respectively. The products of the lipB and lipC genes were 54 and 45% identical to the S. marcescens hasD and hasE gene products, respectively, which were secretory components for the S. marcescens heme-binding protein and metalloprotease. In the E. coli DH5 cells, all three lipBCD genes were essential for the extracellular secretion of both S. marcescens lipase and metalloprotease proteins, both of which lack an N-terminal signal sequence and are secreted via a signal-independent pathway. Although the function of the lipD gene seemed to be analogous to those of the prtFEC and tolC genes encoding third secretory components of ABC transporters, the E. coli TolC protein, which was functional for the S. marcescens Has system, could not replace LipD in the LipB-LipC-LipD transporter reconstituted in E. coli. These results indicated that these three proteins are components of the device which allows extracellular secretion of the extracellular proteins of S. marcescens and that their style is similar to that of the PrtDEF(EC) system.     

Haemophilus influenzae immunoglobulin A1 protease genes: cloning by plasmid integration-excision, comparative analyses, and localization of secretion determinants.

Many bacteria which establish infections after invasion at human mucosal surfaces produce enzymes which cleave immunoglobulin A (IgA), the primary immunoglobulin involved with protection at these sites. Bacterial species such as Haemophilus influenzae which produce IgA1 proteases secrete this enzyme into their environment. However, when the gene encoding this protein was isolated from H. influenzae serotype d and introduced into Escherichia coli, the activity was not secreted into the medium but was localized in the periplasmic space. In this study, the IgA1 protease gene (iga) from an H. influenzae serotype c strain was isolated and the gene from the serotype d strain was reisolated. The IgA1 proteases produced in E. coli from these genes were secreted into the growth medium. A sequence linked to the carboxyl terminus of the iga gene but not present in the original clone was shown to be necessary to achieve normal secretion. Tn5 mutagenesis of the additional carboxyl-terminal region was used to define a 75- to 100-kilodalton coding region required for complete secretion of IgA1 protease but nonessential for protease activity. The iga genes were isolated by a plasmid integration-excision procedure. In this method a derivative of plasmid pBR322 containing a portion of the protease gene and the kanamycin resistance determinant of Tn5 was introduced into H. influenzae by transformation. The kanamycin resistance gene was expressed in H. influenzae, but since pBR322 derivatives are unable to replicate in this organism, kanamycin-resistant transformants arose by integration of the plasmid into the Haemophilus chromosome by homologous recombination. The plasmid, together with the adjoining DNA encoding IgA1 protease, was then excised from the chromosome with DNA restriction enzymes, religated, and reintroduced into E. coli. Comparisons between the H. influenzae protease genes were initiated which are useful in locating functional domains of these enzymes.     

Formation of disulphide bonds during secretion of proteins through the periplasmic-independent type I pathway

In this work, we have investigated whether the bacterial type I secretion pathway, which does not have a periplasmic intermediate of the secreted protein, allows the formation of disulphide bridges. To this end, the formation of disulphide bonds has been studied in an antibody single-chain Fv (scFv) fragment secreted by the Escherichia coli haemolysin (Hly) transporter (a paradigm of type I secretion). The scFv antibody fragment was used as a disulphide bond and protein-folding reporter, as it contains two disulphide bridges that are required for its correct folding (i.e. to preserve its antigen-binding activity). We show that an scFv-HlyA hybrid secreted by Hly type I transporter (TolC, HlyB, HlyD) is accumulated in the extracellular medium with the disulphide bonds correctly formed. Neither periplasmic and inner membrane-bound Dsb enzymes (e.g. DsbC, DsbG, DsbB and DsbD) nor cytoplasmic thioredoxins (TrxA and TrxC) were required for scFv-HlyA oxidation. However, a mutation of the thioredoxin reductase gene (trxB), which leads to the cytoplasmic accumulation of the oxidized forms of thioredoxins, had a specific inhibitory effect on the Hly-dependent secretion of disulphide-containing proteins. These data suggest that premature cytoplasmic oxidation of the substrate may interfere with the secretion process. Taken together, these results indicate not only that the type I system tolerates secretion of disulphide-containing proteins, but also that disulphide bonds are specifically formed during the passage of the polypeptide through the export conduit.     

Sequence of a cluster of genes controlling synthesis and secretion of alkaline protease in Pseudomonas aeruginosa: relationships to other secretory pathways.

A genetic locus implicated in the synthesis and secretion of alkaline protease (APR) in Pseudomonas aeruginosa has been previously described [Guzzo et al., J. Bacteriol. 172 (1990) 942-948]. The nucleotide sequence of the DNA fragment encoding these functions was determined and revealed the existence of five open reading frames: aprA, the structural gene encoding APR; aprI, which encodes a protease inhibitor; and aprD, aprE, aprF whose products are involved in protease secretion. The AprD, AprE and AprF proteins share significant homology with proteins implicated in secretion of Erwinia chrysanthemi proteases and Escherichia coli alpha-haemolysin. These results provide further evidence for the existence of a specialized secretory system widespread among Gram- bacteria.     

Subset of hybrid eukaryotic proteins is exported by the type I secretion system of Erwinia chrysanthemi

Erwinia chrysanthemi exports degradative enzymes by using a type I protein secretion system. The proteases secreted by this system lack an N-terminal signal peptide but contain a C-terminal secretion signal. To explore the substrate specificity of this system, we have expressed the E. chrysanthemi transporter system (prtDEF genes) in Escherichia coli and tested the ability of this ABC transporter to export hybrid proteins carrying C-terminal fragments of E. chrysanthemi protease B. The C terminus contains six glycine-rich repeated motifs, followed by two repeats of the sequences DFLV and DIIV. Two types of hybrid proteins were assayed for transport, proteins with the 93-residue-protease-B C terminus containing one glycine-rich repeat and both hydrophobic terminal repeats and proteins with the 181-residue C terminus containing all repeat motifs. Although the shorter C terminus is unable to export the hybrids, the longer C terminus can promote the secretion of hybrid proteins with N termini as large as 424 amino acids, showing that the glycine-rich motifs are required for the efficient secretion of these hybrids. However, the secretion of hybrids occurs only if these proteins do not carry disulfide bonds in their mature structures. These latter results suggest that disulfide bond formation can occur prior to or during the secretion. Disulfide bonds may prevent type I secretion of hybrids. One simple hypothesis to explain these results is that the type I channel is too narrow to permit the export of proteins with secondary structures stabilized by disulfide bonds.     

Relationships between a new type IV secretion system and the icm/dot virulence system of Legionella pneumophila

We describe here a Legionella pneumophila type IV secretion system that is distinct from the previously described icm/dot system. This type IV secretion system contains 11 genes (lvh ) homologous to genes of other type IV secretion systems, arranged in a similar manner. The lvh genes were found to be located on a DNA island with a GC content higher than the L. pneumophila chromosome. In contrast to the icm/dot system that was shown to be required for intracellular growth in HL-60-derived human macrophages and Acanthamoeba castellanii, the lvh system was found to be dispensable for intracellular growth in these two hosts. The lvh system was found to be partially required for RSF1010 conjugation, a process that was previously shown to be completely dependent on several icm/dot genes. However, results obtained from analysis of double mutants in the icm/dot genes and the lvh genes revealed that lvh genes can substitute for some components of the icm/dot system for RSF1010 conjugation, but not for intracellular growth. These results indicate that components of the icm/dot system and components of the lvh type IV secretion system are able to interact with one another.     

Klebsiella pneumoniae pulS gene encodes an outer membrane lipoprotein required for pullulanase secretion.

The product of the Klebsiella pneumoniae gene pulS, which is located downstream from the pullulanase structural gene (pulA), is essential for the cell surface localization and extracellular release of pullulanase in Escherichia coli K-12. pulS is transcribed in the opposite direction to pulA, from which it is separated by a region of 624 nucleotides. Although this latter region contains a new component of the maltose regulon, pulB, which is transcribed from the pulA promoter, it is not required for pullulanase synthesis or secretion. Unlike pulA and all other pullulanase secretion genes characterized so far, the expression of pulS is not induced by growth in the presence of maltose and is unaffected by mutations in the maltose regulator gene malT. The pulS gene product was identified as a ca. 12-kilodalton outer membrane lipoprotein. The characterization of PulS brings to three the number of identified proteins which are known to be required for pullulanase secretion in addition to the components of the signal sequence-dependent general protein export pathway.