Improved recovery of proteome-informative, protein N-terminal peptides by combined fractional diagonal chromatography (COFRADIC)

We previously described a proteome-wide, peptide-centric procedure for sorting protein N-terminal peptides and used these peptides as readouts for protease degradome and xenoproteome studies. This procedure is part of a repertoire of gel-free techniques known as COmbined FRActional DIagonal Chromatography (COFRADIC) and highly enriches for alpha-amino-blocked peptides, including alpha-amino-acetylated protein N-terminal peptides. Here, we introduce two additional steps that significantly increase the fraction of such proteome-informative, N-terminal peptides: strong cation exchange (SCX) segregation of alpha-amino-blocked and alpha-amino-free peptides and an enzymatic step liberating pyroglutamyl peptides for 2,4,6-trinitrobenzenesulphonic acid (TNBS) modification and thus COFRADIC sorting. The SCX step reduces the complexity of the analyte mixture by enriching N-terminal peptides and depleting alpha-amino-free internal peptides as well as proline-starting peptides prior to COFRADIC. The action of pyroglutamyl aminopeptidases prior to the first COFRADIC peptide separation results in greatly diminishing numbers of contaminating pyroglutamyl peptides in peptide maps. We further show that now close to 95% of all COFRADIC-sorted peptides are alpha-amino-acetylated and, using the same amount of starting material, our novel procedure leads to an increased number of protein identifications.     

昆虫抗茵肽的生理活性及其转基因应用前景

昆虫抗菌肽是昆虫免疫后存在于血淋巴中的一类活性肽.根据分子的结构可分为5类天蚕素类、昆虫防御素、富含脯氨酸或精氨酸的抗菌肽、富含甘氨酸的抗菌肽、抗真菌肽.且具有广谱的抗菌、抗病毒、抑制肿瘤的生物活性.概述了昆虫抗菌肽的基因的克隆与表达及转基因研究方面的进展,并展望了抗菌肽在基因工程中的应用前景.     

昆虫抗菌肽的生理活性及其转基因应用前景

昆虫抗菌肽是昆虫免疫后存在于血淋巴中的一类活性肽。根据分子的结构可分为 5类 :天蚕素类、昆虫防御素、富含脯氨酸或精氨酸的抗菌肽、富含甘氨酸的抗菌肽、抗真菌肽。且具有广谱的抗菌、抗病毒、抑制肿瘤的生物活性。概述了昆虫抗菌肽的基因的克隆与表达及转基因研究方面的进展 ,并展望了抗菌肽在基因工程中的应用前景     

Synthesis of Quantum Dots Labeled Short Peptides and Imaging the T cell Surface Receptors with QDs-Labeled Peptides

Semiconductor quantum dots have been used for labeling many biomacromolecules and small molecules, but it remains a challenge to couple it with short active peptides that play critical roles in many physiological processes. Several binding methods for QDs and short peptides have been reported, but all with some limitations in amino acid sequence. In this paper, we report a method for synthesis of quantum dots labeled short peptides that is appropriate to any short peptide. The quantum dots (CdTe)-labeled short peptides were verified and characterized by RP-HPLC. The QDs-labeled peptides were applied to monitor the specific binding between two immune peptides and T cell surface receptors. The quantum dots-labeled immune peptides provide a powerful method for studying immunological functions of these peptides, and an effective strategy for monitoring their complex modulating processes in vivo.     

蛙属Rana活性肽研究新进展

本文对近年从蛙属Ｒａｎａ提取分离的活性肽作了综述,对一些活性肽如排钠利尿肽,速激肽,抗菌肽,激素肽等作了较详细的介绍。     

Sequencing cyclic peptides by multistage mass spectrometry

Some of the most effective antibiotics (e.g. Vancomycin and Daptomycin) are cyclic peptides produced by non-ribosomal biosynthetic pathways. While hundreds of biomedically important cyclic peptides have been sequenced, the computational techniques for sequencing cyclic peptides are still in their infancy. Previous methods for sequencing peptide antibiotics and other cyclic peptides are based on Nuclear Magnetic Resonance spectroscopy, and require large amount (miligrams) of purified materials that, for most compounds, are not possible to obtain. Recently, development of MS-based methods has provided some hope for accurate sequencing of cyclic peptides using picograms of materials. In this paper we develop a method for sequencing of cyclic peptides by multistage MS, and show its advantages over single-stage MS. The method is tested on known and new cyclic peptides from Bacillus brevis, Dianthus superbus and Streptomyces griseus, as well as a new family of cyclic peptides produced by marine bacteria.     

Exogenous peptides presented by transporter associated with antigen processing (TAP)-deficient and TAP-competent cells: intracellular loading and kinetics of presentation

This study investigates the differential capacity of TAP-deficient T2 cells, TAP-competent EBV cells, and immature and mature dendritic cells to present peptides to preformed CTL lines. It demonstrates that presentation of exogenous peptides involves peptide uptake and loading onto newly synthesized MHC class I molecules. This mechanism was best demonstrated for low affinity peptides in the presence of irrelevant peptides competing for HLA binding sites. Under these circumstances, inhibition of protein synthesis with cycloheximide or vesicular trafficking with brefeldin A significantly reduced the presentation of low affinity peptides. This was not restored by adding exogenous beta(2)-microglobulin to stabilize the MHC complex on the cell surface. In contrast, presentation of high affinity peptides was not sensitive to cycloheximide or brefeldin A, which suggests that different mechanisms may operate for presentation of high and low affinity peptides by TAP-competent cells. High affinity peptides can apparently compete with peptides in preloaded MHC class I molecules at the cell surface, whereas low affinity peptides require empty MHC molecules within cells. Accordingly, very high concentrations of exogenous low affinity peptides in conjunction with active MHC class I metabolism were required to allow successful presentation against a background of competing intracellular high affinity peptides in TAP-competent cells. These findings have implications for the design of peptide and protein-based vaccines.     

Highly selective enrichment of phosphorylated peptides from peptide mixtures using titanium dioxide microcolumns

Reversible phosphorylation of proteins regulates the majority of all cellular processes, e.g. proliferation, differentiation, and apoptosis. A fundamental understanding of these biological processes at the molecular level requires characterization of the phosphorylated proteins. Phosphorylation is often substoichiometric, and an enrichment procedure of phosphorylated peptides derived from phosphorylated proteins is a necessary prerequisite for the characterization of such peptides by modern mass spectrometric methods. We report a highly selective enrichment procedure for phosphorylated peptides based on TiO2microcolumns and peptide loading in 2,5-dihydroxybenzoic acid (DHB). The effect of DHB was a very efficient reduction in the binding of nonphosphorylated peptides to TiO2 while retaining its high binding affinity for phosphorylated peptides. Thus, inclusion of DHB dramatically increased the selectivity of the enrichment of phosphorylated peptides by TiO2. We demonstrated that this new procedure was more selective for binding phosphorylated peptides than IMAC using MALDI mass spectrometry. In addition, we showed that LC-ESI-MSMS was biased toward monophosphorylated peptides, whereas MALDI MS was not. Other substituted aromatic carboxylic acids were also capable of specifically reducing binding of nonphosphorylated peptides, whereas phosphoric acid reduced binding of both phosphorylated and nonphosphorylated peptides. A putative mechanism for this intriguing effect is presented.     

Escherichia coli peptide binding protein OppA has a preference for positively charged peptides

The Escherichia coli peptide binding protein OppA is an essential component of the oligopeptide transporter Opp. Based on studies on its orthologue from Salmonella typhimurium, it has been proposed that OppA binds peptides between two and five amino acids long, with no apparent sequence selectivity. Here, we studied peptide binding to E. coli OppA directly and show that the protein has an unexpected preference for basic peptides. OppA was expressed in the periplasm, where it bound to available peptides. The protein was purified in complex with tightly bound peptides. The crystal structure (up to 2.0 Å) of OppA liganded with the peptides indicated that the protein has a preference for peptides containing a lysine. Mass spectrometry analysis of the bound peptides showed that peptides between two and five amino acids long bind to the protein and indeed hinted at a preference for positively charged peptides. The preference of OppA for peptides with basic residues, in particular lysines, was corroborated by binding studies with peptides of defined sequence using isothermal titration calorimetry and intrinsic protein fluorescence titration. The protein bound tripeptides and tetrapeptides containing positively charged residues with high affinity, whereas related peptides without lysines/arginines were bound with low affinity. A structure of OppA in an open conformation in the absence of ligands was also determined to 2.0 Å, revealing that the initial binding site displays a negative surface charge, consistent with the observed preference for positively charged peptides. Taken together, E. coli OppA appears to have a preference for basic peptides.     

Effects of five-membered ring amino acid incorporation into peptides for coiled coil formation

A five-membered ring amino acid (Ac₅c), the peptides of which exhibit a preference for helical secondary structures, was introduced into peptides for the purpose of designing coiled coil peptides with high binding affinities. We prepared five types of peptides containing Ac₅c with different numbers or at different positions. The incorporation of Ac₅c into peptides enhanced their α-helicities; however, in contrast to our expectations, it did not result in stable coiled coil formation. The structures of side chains in hydrophobic amino acids, not α-helicities appeared to be important for stable hydrophobic interactions between peptides. Although we were unable to develop coiled coil peptides with high binding affinities, the present results will be useful for designing novel coiled coil peptides.     

Linear and accurate quantitation of proenkephalin-derived peptides by isotopic labeling with internal standards and mass spectrometry

Proenkephalin (PE) represents the precursor protein of the active peptide neurotransmitter enkephalin. Quantitative analysis of peptides and proteins is an objective of mass spectrometry-based studies of biological systems and will be important for studying the proteolytic conversion of proproteins to active enkephalin and neuropeptides. The goal of this study was to define and optimize quantitation of different amounts of tryptic peptides derived from PE using light (H4, 4 hydrogens) and heavy (D4, 4 deuteriums) succinic anhydride for isotopic labeling of peptides analyzed by liquid chromatography-tandem mass spectrometry (LC-MS/MS). Comparisons were made between PE-derived peptides with and without internal standards. Importantly, incorporation of internal standards of known amounts of heavy isotope-labeled tryptic peptides of PE provided linear calibration plots with accurate quantitation. In contrast, comparison of light and heavy isotope-labeled peptides without internal standards produced variable and inaccurate nonlinear isotopic ratio comparisons of PE-derived peptides. These results demonstrate that use of internal standards composed of a defined amount(s) of standard peptides (PE-derived tryptic peptides) is necessary for high-quality linear quantitation of peptides by isotopic labeling and MS/MS.     

Quantitative peptidomics of pituitary glands from mice deficient in copper transport.

We previously described a method of quantitating levels of peptides in Cpe(fat)/Cpe(fat) mice using affinity chromatography to isolate peptide-processing intermediates and differential isotopic labeling/mass spectrometry. In the present study, we compared two different isotopic labels, acetic anhydride and succinic anhydride for detection and quantitation of peptides in wild type mice. As previously found for acetic anhydride, succinic anhydride efficiently labels all primary amines in various peptides. Of these two reagents, succinic anhydride provides better resolution between the heavy and light peaks of the labelled peptides due to a greater mass difference between the deuterated (heavy) and non-deuterated (light) form of this label (4 Da for succinate, 3 Da for acetate). Using succinic anhydride labeling, the accuracy of measuring 1:1 and 1:2 ratios of peptides in pituitary extracts was within 5% of the theoretical value for most peptides. The accuracy with succinic anhydride is comparable to the accuracy of acetic anhydride and more peptides could be detected and quantitated with succinic anhydride. The two labels were then used to examine pituitary peptides in mice with a defect in copper transport (Atp7a mice) vs wild type mice. Using succinic anhydride, 13 peptides could be detected, 12 of which matched the theoretical mass of known pituitary peptides. Five of the six peptides which contain C-terminal amide groups were significantly decreased in the Atp7a mice relative to wild type mice, whereas only one non-amidated peptide was significantly decreased in Atp7a mice. With acetic anhydride, only five peptides could be quantitated. The three peptides which contain C-terminal amide groups were decreased approximately 30% in the Atp7a mice. The selective decrease in amidated peptides in Atp7a mice is consistent with the copper-requirement of the enzyme that forms C-terminal amides.     

Optimization of Heavy Chain and Light Chain Signal Peptides for High Level Expression of Therapeutic Antibodies in CHO Cells

Translocation of a nascent protein from the cytosol into the ER mediated by its signal peptide is a critical step in protein secretion. The aim of this work was to develop a platform technology to optimize the signal peptides for high level production of therapeutic antibodies in CHO cells. A database of signal peptides from a large number of human immunoglobulin (Ig) heavy chain (HC) and kappa light chain (LC) was generated. Most of the HC signal peptides contain 19 amino acids which can be divided into three domains and the LC signal peptides contain 22 amino acids. The signal peptides were then clustered according to sequence similarity. Based on the clustering, 8 HC and 2 LC signal peptides were analyzed for their impacts on the production of 5-top selling antibody therapeutics, namely, Herceptin, Avastin, Remicade, Rituxan, and Humira. The best HC and LC signal peptides for producing these 5 antibodies were identified. The optimized signal peptides for Rituxan is 2-fold better compared to its native signal peptides which are available in the public database. Substitution of a single amino acid in the optimized HC signal peptide for Avastin reduced its production significantly. Mass spectrometry analyses revealed that all optimized signal peptides are accurately removed in the mature antibodies. The results presented in this report are particularly important for the production of these 5 antibodies as biosimilar drugs. They also have the potential to be the best signal peptides for the production of new antibodies in CHO cells.     

Comparative evaluation of current peptide production platforms used in absolute quantification in proteomics

Absolute quantification of peptides by mass spectrometry requires a reference, frequently using heavy isotope-coded peptides as internal standards. These peptides have traditionally been generated by chemical stepwise synthesis. Recently a new way to supply such peptides was described in which nucleotide sequences coding for the respective peptides are concatenated into a synthetic gene (QconCAT). These QconCATs are then expressed to produce a polypeptide consisting of concatenated peptides, purified, quantified by various methods, and then digested to yield the final internal standard peptides. Although both of these methods for peptide production are routinely used for absolute quantifications, there is currently no information regarding the accuracy of the quantifications made in each case. In this study, we used sets of synthetic and biological peptides in parallel to evaluate the accuracy of either method. We also addressed some technical issues regarding the preparation and proper utilization of such standard peptides. Twenty-five peptides derived from the Caenorhabditis elegans proteome were selected for this study. Twenty-four were successfully chemically synthesized. Five QconCAT genes were designed, each a concatenation of the same 25 peptides but each in separate, different randomized order, and expressed via in vitro translation reactions that contained heavy isotope-labeled lysine and arginine. Three of the five QconCATs were successfully produced. Different digestion conditions, including various detergents and incubation conditions, were tested to find those optimal for the generation of a reproducible and accurate reference sample mixture. All three QconCAT polypeptides were then digested using the optimized conditions and then mixed in a 1:1 ratio with their synthetic counterparts. Multireaction monitoring mass spectrometry was then used for quantification. Results showed that the digestion protocol had a significant impact on equimolarity of final peptides, confirming the need for optimization. Under optimal conditions, however, most QconCAT peptides were produced at an equimolar ratio. A few QconCAT-derived peptides were largely overestimated due to problems with solubilization or stability of the synthetic peptides. Although the order in which the peptide sequences appeared in the QconCAT sequence proved to affect the success rate of in vitro translation, it did not significantly affect the final peptide yields. Overall neither the chemical synthesis nor the recombinant genetic approach proved to be superior as a method for the production of reference peptides for absolute quantification.     

Radiopharmaceuticals: new antimicrobial agents

Small antimicrobial peptides are good candidates for new antimicrobial agents. A scintigraphic approach to studying the pharmacokinetics of antimicrobial peptides in animals has been developed. The peptides were safely and reproducibly labelled with technetium-99m and, after intravenous injection of the radiolabelled peptides into infected animals, scintigraphy allowed real-time quantification of the peptide in the various body compartments. Antimicrobial peptides rapidly accumulated at sites of infection but not at sites of sterile inflammation, indicating that radiolabelled antimicrobial peptides could be used in detection of infection. These radiopharmaceuticals enabled the efficacy of antibacterial therapy in animals to be monitored. The scintigraphic approach provides a useful method for investigating the pharmacokinetics of small peptides in animals.     

Multifunctional peptides encrypted in milk proteins

Many bioactivities of milk are latent in that they are inactive within the protein sequence, requiring enzymatic proteolysis for release of bioactive peptides from milk proteins precursors. Bioactivities of peptides encrypted in major milk proteins are latent until released and activated, e.g. during gastrointestinal digestion or food processing. Bioactive peptides can be produced in vivo following intake of milk proteins, and the proteolytic system of bacterial species used in the production of fermented milk products and cheese can contribute to the liberation of bioactive peptides or precursors thereof. Activated peptides are potential modulators of various regulatory processes in the living system: immunomodulatory peptides stimulate the activities of cells of the immune system and several cytomodulatory peptides inhibit cancer cell growth, antimicrobial peptides kill sensitive microorganisms, angiotensin-I-converting enzyme (ACE)-inhibitory peptides exert an hypotensive effect, opioid peptides are opioid receptor ligands which can modulate absorption processes in the intestinal tract, mineral binding peptides may function as carriers for different minerals, especially calcium. Many milk-derived peptides reveal multifunctional properties, i.e. specific peptide sequences having two or more different biological activities have been reported. Milk protein-derived bioactive peptides are claimed to be health enhancing components that can be used to reduce the risk of disease or to enhance a certain physiological function.     

In silico predictions of 3D structures of linear and cyclic peptides with natural and non‐proteinogenic residues

We extended the use of Peplook, an in silico procedure for the prediction of three‐dimensional (3D) models of linear peptides to the prediction of 3D models of cyclic peptides and thanks to the ab initio calculation procedure, to the calculation of peptides with non‐proteinogenic amino acids. Indeed, such peptides cannot be predicted by homology or threading. We compare the calculated models with NMR and X‐ray models and for the cyclic peptides, with models predicted by other in silico procedures (Pep‐Fold and I‐Tasser). For cyclic peptides, on a set of 38 peptides, average root mean square deviation of backbone atoms (BB‐RMSD) was 3.8 and 4.1 Å for Peplook and Pep‐Fold, respectively. The best results are obtained with I‐Tasser (2.5 Å) although evaluations were biased by the fact that the resolved Protein Data Bank models could be used as template by the server. Peplook and Pep‐Fold give similar results, better for short (up to 20 residues) than for longer peptides. For peptides with non‐proteinogenic residues, performances of Peplook are sound with an average BB‐RMSD of 3.6 Å for ‘non‐natural peptides’ and 3.4 Å for peptides combining non‐proteinogenic residues and cyclic structure. These results open interesting possibilities for the design of peptidic drugs. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Analytical challenges and strategies for the characterization of gp96-associated peptides

This paper describes the methods that were used for the preparation of gp96-associated peptides and the analysis of these peptides using mass spectrometry. A general approach for stripping, enriching, and separating peptides associated with gp96 is presented. Protocols for the demonstration of the diversity of gp96-associated peptides using mass spectrometry and the identification of these peptides using a combination of tandem mass spectrometry and protein database searching are described. Important parameters and factors that affect the outcome of the experiments are discussed.     

Use of the multipin peptide synthesis technique for the generation of antipeptide sera.

The multipin peptide synthesis technique has been used to map antigenic sites of proteins (1,2). Antibodies raised to the whole protein are screened on pin-synthesized overlapping octapeptides homologous with the protein of interest, and the peptides that bind antibodies clearly identify the epitopes. What is described in this study is a method using pin-synthesized peptides to generate specific antibodies to many peptides. Cleavable linkers have been developed (3) that, used together with the multipin peptide synthesis technique, allow the synthesis and cleavage of many thousands of peptides into aqueous solutions at physiological pH. This technique is useful for assays requiring peptides in solution, e.g., mapping of T-cell determinants. A technique has been developed for the cleavage of many peptides from pins and simultaneous coupling to immunogenic carriers (4). The conjugates produced are suitable for the generation of antipeptide antibodies. This procedure is illustrated using several 15 amino acid long peptides (15-mers), homologous with the sequence of a model antigen, myohemerythrin (MHr). The resulting antipeptide sera generated were tested by ELISA for titer and specificity on pin-synthesized peptides and beta-amide peptides and the protein antigen coated to microtiter plates.     

Use of the multipin peptide synthesis technique for the generation of antipeptide sera

The multipin peptide synthesis technique has been used to map antigenic sites of proteins (1,2). Antibodies raised to the whole protein are screened on pin-synthesized overlapping octapeptides homologous with the protein of interest, and the peptides that bind antibodies clearly identify the epitopes. What is described in this study is a method using pin-synthesized peptides to generate specific antibodies to many peptides. Cleavable linkers have been developed (3) that, used together with the multipin peptide synthesis technique, allow the synthesis and cleavage of many thousands of peptides into aqueous solutions at physiological pH. This technique is useful for assays requiring peptides in solution, e.g., mapping of T-cell determinants. A technique has been developed for the cleavage of many peptides from pins and simultaneous coupling to immunogenic carriers (4). The conjugates produced are suitable for the generation of antipeptide antibodies. This procedure is illustrated using several 15 amino acid long peptides (15-mers), homologous with the sequence of a model antigen, myohemerythrin (MHr). The resulting antipeptide sera generated were tested by ELISA for titer and specificity on pinsynthesized peptides and β-amide peptides and the protein antigen coated to microtiter plates.