Carbon-limited fed-batch production of medium-chain-length polyhydroxyalkanoates from nonanoic acid by <Emphasis Type="Italic">Pseudomonas putida</Emphasis> KT2440

Pseudomonas putida KT2440 grew on glucose at a specific rate of 0.48 h⁻¹ but accumulated almost no poly-3-hydroxyalkanoates (PHA). Subsequent nitrogen limitation on nonanoic acid resulted in the accumulation of only 27% medium-chain-length PHA (MCL-PHA). In contrast, exponential nonanoic acid-limited growth (μ = 0.15 h⁻¹) produced 70 g l⁻¹ biomass containing 75% PHA. At a higher exponential feed rate (μ = 0.25 h⁻¹), the overall productivity was increased but less biomass (56 g l⁻¹) was produced due to higher oxygen demand, and the biomass contained less PHA (67%). It was concluded that carbon-limited exponential feeding of nonanoic acid or related substrates to cultures of P. putida KT2440 is a simple and highly effective method of producing MCL-PHA. Nitrogen limitation is unnecessary.     

Ethanol production from sweet sorghum juice in batch and fed-batch fermentations by <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Sweet sorghum juice supplemented with 0.5% ammonium sulphate was used as a substrate for ethanol production by Saccharomyces cerevisiae TISTR 5048. In batch fermentation, kinetic parameters for ethanol production depended on initial cell and sugar concentrations. The optimum initial cell and sugar concentrations in the batch fermentation were 1 × 10⁸ cells ml⁻¹ and 24 °Bx respectively. At these conditions, ethanol concentration produced (P), yield (Y _ps) and productivity (Q _p ) were 100 g l⁻¹, 0.42 g g⁻¹ and 1.67 g l⁻¹ h⁻¹ respectively. In fed-batch fermentation, the optimum substrate feeding strategy for ethanol production at the initial sugar concentration of 24 °Bx was one-time substrate feeding, where P, Y _ps and Q _p were 120 g l⁻¹, 0.48 g g⁻¹ and 1.11 g l⁻¹ h⁻¹ respectively. These findings suggest that fed-batch fermentation improves the efficiency of ethanol production in terms of ethanol concentration and product yield.     

Determination of the kinetic parameters during continuous cultivation of the lipase-producing thermophile Bacillus sp. IHI-91 on olive oil

A thermostable lipase was produced in continuous cultivation of a newly isolated thermophilic Bacillus sp. strain IHI-91 growing optimally at 65 °C. Lipase activity decreased with increasing dilution rate while lipase productivity showed a maximum of 340 U l⁻¹ h⁻¹ at a dilution rate of 0.4 h⁻¹. Lipase productivity was increased by 50% compared to data from batch fermentations. Up to 70% of the total lipase activity measured was associated to cells and by-products or residual substrate. Kinetic and stoichiometric parameters for the utilisation of olive oil were determined. The maximal biomass output method led to a saturation constant K _S of 0.88 g/l. Both batch growth data and a washout experiment yielded a maximal specific growth rate, μ_max, of 1.0 h⁻¹. Oxygen uptake rates of up to 2.9 g l⁻¹h⁻¹ were calculated and the yield coefficient, Y _X/O, was determined to be 0.29 g dry cell weight/g O₂. From an overall material balance the yield coefficient, Y _X/S, was estimated to be 0.60 g dry cell weight/g olive oil. Received: 8 January 1997 / Received revision: 30 April 1997 / Accepted: 4 May 1997     

Improving intracellular production of recombinant protein in <Emphasis Type="Italic">Pichia pastoris</Emphasis> using an optimized preinduction glycerol-feeding scheme

High-cell-density production of recombinant growth hormone of Lateolabrax japonicus (rljGH) expressed intracellularly in Pichia pastoris was investigated. In the regular strategy of induction at a cell density of 160 g l⁻¹, short duration of intracellular rljGH accumulation (17 h) resulted in a low final cell density of 226 g l⁻¹. Thus, a novel strategy of induction at a cell density of 320 g l⁻¹ was investigated. In this strategy, the preinduction glycerol-feeding scheme had a significant effect on the post-induction production. Constant glycerol feeding led to a decrease of the specific rljGH production and specific production rate because of low preinduction specific growth rate. This decrease was avoided by exponential glycerol feeding to maintain a preinduction specific growth rate of 0.16 h⁻¹. The results from exponential glycerol feeding indicated that the rljGH production depended on the preinduction specific growth rate. Moreover, mixed feeding of methanol and glycerol during induction improved the specific production rate to 0.07 mg g⁻¹ h⁻¹ from 0.043 mg g⁻¹ h⁻¹. Consequently, both high cell density (428 g l⁻¹) and high rljGH production could be achieved by the novel strategy: growing the cells at the specific growth rate of 0.16 h⁻¹ to the cell density of 320 g l⁻¹ and inducing the expression by mixed feeding.     

Production of lipase by high cell density fed-batch culture of Candida cylindracea

Candida cylindracea NRRL Y-17506 was grown to produce extracellular lipase from oleic acid as a carbon source. Through flask cultures, it was found that the optimum initial oleic acid concentration for cell growth was 20 g l⁻¹. However, high initial concentrations of oleic acid up to 50 g l⁻¹ were not inhibitory. The highest extracellular lipase activity obtained in flask culture was 3.0 U ml⁻¹ after 48 h with 5 g l⁻¹ of initial oleic acid concentration. Fed-batch cultures (intermittent and stepwise feeding) were carried out to improve cell concentration and lipase activity. For the intermittent feeding fed-batch culture, the final cell concentration was 52 g l⁻¹ and the extracellular lipase activity was 6.3 U ml⁻¹ at 138.5 h. Stepwise feeding fed-batch cultures were carried out to simulate an exponential feeding and to investigate the effects of specific growth rate (0.02, 0.04 and 0.08 h⁻¹) on cell growth and lipase production. The highest final cell concentration obtained was 90 g l⁻¹ when the set point of specific growth rate (μ_set) was 0.02 h⁻¹. High specific growth rate (0.04 and 0.08 h⁻¹) decreased extracellular lipase production in the later part of fed-batch cultures due to build-up of the oleic acid oversupplied. The highest extracellular lipase activity was 23.7 U ml⁻¹ when μ_set was 0.02 h⁻¹, while the highest lipase productivity was 0.31 U ml⁻¹ h⁻¹ at μ_set of 0.08 h⁻¹.     

Performance assessment of malolactic fermenting bacteria Oenococcus oeni and Lactobacillus brevis in continuous culture

The growth performance of malolactic fermenting bacteria Oenococcus oeni NCIMB 11648 and Lactobacillus brevis X₂ was assessed in continuous culture. O. oeni grew at a dilution rate range of 0.007 to 0.052 h⁻¹ in a mixture of 5:6 (g l⁻¹) of glucose/fructose at an optimal pH of 4.5, and L. brevis X₂ grew at 0.010 to 0.089 h⁻¹ in 10 g l⁻¹ glucose at an optimal pH of 5.5 in a simple and safe medium. The cell dry weight, substrate uptake and product formation were monitored, as well as growth kinetics, yield parameters and fermentation balances were also evaluated under pH control conditions. A comparison of growth characteristics of two strains was made, and this showed significantly different performance. O. oeni has lower maximum specific growth rate (μ_max=0.073 h⁻¹), lower maximum cell productivity (Q _x ^max=17.6 mg cell l⁻¹ h⁻¹), lower maximum biomass yield (Y _x/s ^max=7.93 g cell mol⁻¹ sugar) and higher maintenance coefficient (m _s=0.45 mmol⁻¹ sugar g⁻¹ cell h⁻¹) as compared with L. brevis X₂ (μ_max=0.110 h⁻¹; Q _x ^max=93.2 g⁻¹ cell mol⁻¹ glucose; Y _x/s ^max=22.3 g cell mol⁻¹ glucose; m _s=0.21 mmol⁻¹ glucose g⁻¹ cell h⁻¹). These data suggest a possible more productive strategy for their combined use in maturation of cider and wine.     

Biokinetic parameters and behavior of <Emphasis Type="Italic">Aeromonas hydrophila</Emphasis> during anaerobic growth

The biokinetics of glucose metabolism were evaluated in Aeromonas hydrophila during growth in an anaerobic biosystem. After approx 34 h growth, A. hydrophila metabolized 5,000 mg glucose l⁻¹ into the end-products ethanol, acetate, succinate and formate. The maximum growth rate, μ _m, half saturation coefficients, K _s, microbial yield coefficient, Y, cell mass decay rate coefficient, k _d, and substrate inhibition coefficient, K _si were 0.25 ± 0.03 h⁻¹, 118 ± 31 mg glucose l⁻¹, 0.12 μg DNA mg glucose⁻¹, 0.01 h⁻¹, and 3,108 ± 1,152 mg glucose l⁻¹, respectively. These data were used to predict the performance of a continuous growth system with an influent glucose concentration of 5,000 mg l⁻¹. Results of the analysis suggest that A. hydrophila will metabolize glucose at greater than 95% efficiency when hydraulic retention times (HRTs) exceed 7 h, whereas the culture is at risk of washing out at an HRT of 6.7 h.     

Lactic acid production from cellulosic waste by immobilized cells of Lactobacillus delbrueckii

Industrial waste corn cob residue (from xylose manufacturing) without pretreatment was hydrolyzed by cellulase and cellobiase. The cellulosic hydrolysate contained 52.4 g l⁻¹ of glucose and was used as carbon source for lactic acid fermentation by cells of Lactobacillus delbrueckii ZU-S2 immobilized in calcium alginate gel beads. The final concentration of lactic acid and the yield of lactic acid from glucose were 48.7 g l⁻¹ and 95.2%, respectively, which were comparative to the results of pure glucose fermentation. The immobilized cells were quite stable and reusable, and the average yield of lactic acid from glucose in the hydrolysate was 95.0% in 12 repeated batches of fermentation. The suitable dilution rate of continuous fermentation process was 0.13 h⁻¹, and the yield of lactic acid from glucose and the productivity were 92.4% and 5.746 g l⁻¹ h⁻¹, respectively. The production of lactic acid by simultaneous saccharification and fermentation (SSF) process was carried out in a coupling bioreactor, the final concentration of lactic acid was 55.6 g l⁻¹, the conversion efficiency of lactic acid from cellulose was 91.3% and the productivity was 0.927 g l⁻¹ h⁻¹. By using fed-batch technique in the SSF process, the final concentration of lactic acid and the productivity increased to 107.6 g l⁻¹ and 1.345 g l⁻¹ h⁻¹, respectively, while the dosage of cellulase per gram substrate decreased greatly. This research work should advance the bioconversion of renewable cellulosic resources and reduce environmental pollution.     

Effect of growth rate on the production of<Emphasis Type="SmallCaps">l</Emphasis>-proline in the fed-batch culture of<Emphasis Type="Italic">Corynebacterium acetoacidophilum</Emphasis>

Corynebacterium acetoacidophilum RYU3161 was cultivated in al-histidine-limited fed-batch culture. To investigate the effect of cell growth on thel-proline production, 5l fed-batch culture was performed using an exponential feeding rate to obtain the specific growth rates (μ) of 0.04, 0.06, 0.08, and 0.1 h⁻¹. The results show that the highest production ofl-proline was obtained at μ=0.04 h⁻¹. The specificl-proline production rate (Q_p) increased proportionally as a function of the specific growth rate, but decreased after it revealed the maximum value at μ=0.08 h⁻¹. Thus, the highest productivity ofl-proline was 1.66 g L⁻¹ h⁻¹ at μ=0.08 h⁻¹. The results show that the production of L-proline inC. acetoacidophilum RYU3161 has mixed growth-associated characteristics.     

Isolation of <Emphasis Type="Italic">Aspergillus oryzae</Emphasis> mutants for heterologous protein production from a double proteinase gene disruptant

The recombinant Pichia pastoris harboring an improved methionine adenosyltransferase (MAT) shuffled gene was employed to biosynthesize S-adenosyl-l-methionine (SAM). Two l-methionine (l-Met) addition strategies were used to supply the precursor: the batch addition strategy (l-Met was added separately at three time points) and the continuous feeding strategies (l-Met was fed continuously at the rate of 0.1, 0.2, and 0.5 g l⁻¹ h⁻¹, respectively). SAM accumulation, l-Met conversion rate, and SAM productivity with the continuous feeding strategies were all improved over the batch addition strategy, which reached 8.46 ± 0.31 g l⁻¹, 41.7 ± 1.4%, and 0.18 ± 0.01 g l⁻¹ h⁻¹ with the best continuous feeding strategy (0.2 g l⁻¹ h⁻¹), respectively. The bottleneck for SAM production with the low l-Met feeding rate (0.1 g L⁻¹ h⁻¹) was the insufficient l-Met supply. The analysis of the key enzyme activities indicated that the tricarboxylic acid cycle and glycolytic pathway were reduced with the increasing l-Met feeding rate, which decreased the adenosine triphosphate (ATP) synthesis. The MAT activity also decreased as the l-Met feeding rate rose. The reduced ATP synthesis and MAT activity were probably the reason for the low SAM accumulation when the l-Met feeding rate reached 0.5 g l⁻¹ h⁻¹.     

Lactic acid production from sugar-cane juice by a newly isolated Lactobacillus sp.

A newly isolated sucrose-tolerant, lactic acid bacterium, Lactobacillus sp. strain FCP2, was grown on sugar-cane juice (125 g sucrose l⁻¹, 8 g glucose l⁻¹ and 6 g fructose l⁻¹) for 5 days and produced 104 g lactic acid l⁻¹ with 90% yield. A higher yield (96%) and productivity (2.8 g l⁻¹ h⁻¹) were obtained when strain FCP2 was cultured on 3% w/v (25 g sucrose l⁻¹, 2 g glucose l⁻¹ and 1 g fructose l⁻¹) sugar-cane juice for 10 h. Various cheap nitrogen sources such as silk worm larvae, beer yeast autolysate and shrimp wastes were also used as a substitute to yeast extract.     

Lipid production by <Emphasis Type="Italic">Rhodosporidium toruloides</Emphasis> Y4 using different substrate feeding strategies

Microbial lipid is a potential alternative feedstock for the biodiesel industry. New culture strategies remain to be developed to improve the economics of microbial lipid technology. This work describes lipid production by the oleaginous yeast Rhodosporidium toruloides Y4 using a 15-l bioreactor with different substrate feeding strategies. Among these strategies, the intermittent feeding mode gave a lipid productivity of 0.36 g l⁻¹ h⁻¹, whereas the constant glucose concentration II (CC-II) mode gave the highest lipid productivity of 0.57 g l⁻¹ h⁻¹. The repeated fed-batch mode according to the CC-II mode was performed with a duration time of 358 h, and the overall lipid productivity was 0.55 g l⁻¹ h⁻¹. Our results suggested that substrate feeding modes had a great impact on lipid productivity and that the repeated fed-batch process was the most appealing method by which to enhance microbial lipid production.     

Increased erythritol production in fed-batch cultures of Torula sp. by controlling glucose concentration

The effect of glucose concentration on erythritol production by Torula sp. was investigated. The maximum volumetric productivity of erythritol was obtained at an initial glucose concentration of 300 g l⁻¹ in batch culture. The volumetric productivity was maximal at a controlled glucose concentration of 225 g l⁻¹, reducing the lag time of the erythritol production. A fed-batch culture was established with an initial glucose concentration of 300 g l⁻¹ and with a controlled glucose concentration of 225 g l⁻¹ in medium containing phytic acid as a phosphate source. In this fed-batch culture, a final erythritol production of 192 g l⁻¹ was obtained from 400 g l⁻¹ glucose in 88 h. This corresponded to a volumetric productivity of 2.26 g l⁻¹ h⁻¹ and a 48% yield. Journal of Industrial Microbiology & Biotechnology (2001) 26, 248–252. Received 26 September 2000/ Accepted in revised form 16 January 2001     

Production of 1,3-Propanediol by Clostridium butyricum VPI 3266 in continuous cultures with high yield and productivity

The effects of dilution rate and substrate feed concentration on continuous glycerol fermentation by Clostridium butyricum VPI 3266, a natural 1,3-propanediol producer, were evaluated in this work. A high and constant 1,3-propanediol yield (around 0.65 mol/mol), close to the theoretical value, was obtained irrespective of substrate feed concentration or dilution rate. Improvement of 1,3-propanediol volumetric productivity was achieved by increasing the dilution rate, at a fixed feed substrate concentration of 30, 60 or 70 g l⁻¹. Higher 1,3-propanediol final concentrations and volumetric productivities were also obtained when glycerol feed concentration was increased from 30 to 60 g l⁻¹, at D=0.05–0.3 h⁻¹, and from 60–70 g l⁻¹, at D=0.05 and 0.1 h⁻¹·30 g l⁻¹ of 1,3-propanediol and the highest reported value of productivity, 10.3 g l⁻¹ h⁻¹, was achieved at D=0.30 h⁻¹ and 60 g l⁻¹ of feed glycerol. A switch to an acetate/butyrate ratio higher than one was observed for 60 g l⁻¹ of feed glycerol and a dilution rate higher than 0.10 h⁻¹; moreover, at D=0.30 h⁻¹ 3-hydroxypropionaldehyde accumulation was observed for the first time in the fermentation broth of C. butyricum.     

Increase of ethanol productivity by cell-recycle fermentation of flocculating yeast

Using the recombinant flocculating Angel yeast F6, long-term repeated batch fermentation for ethanol production was performed and a high volumetric productivity resulted from half cells not washed and the optimum opportunity of residual glucose 20 g l⁻¹ of last medium. The obtained highest productivity was 2.07 g l⁻¹ h⁻¹, which was improved by 75.4% compared with that of 1.18 g l⁻¹ h⁻¹ in the first batch fermentation. The ethanol concentration reached 8.4% corresponding to the yield of 0.46 g g⁻¹. These results will contribute greatly to the industrial production of fuel ethanol using the commercial method with the flocculating yeast.     

Propionic acid fermentation from glycerol: comparison with conventional substrates

Instead of the conventional carbon sources used for propionic acid biosynthesis, the utilization of glycerol is considered here, since the metabolic pathway involved in the conversion of glycerol to propionic acid is redox-neutral and energetic. Three strains, Propionibacterium acidipropionici, Propionibacterium acnes and Clostridium propionicum were tested for their ability to convert glycerol to propionic acid during batch fermentation with initially 20 g/l glycerol. P. acidipropionici showed higher efficiency in terms of fermentation time and conversion yield than did the other strains. The fermentation profile of this bacterium consisted in propionic acid as the major product (0.844 mol/mol), and in minimal by-products: succinic (0.055 mol/mol), acetic (0.023 mol/mol) and formic (0.020 mol/mol) acids and n-propanol (0.036 mol/mol). The overall propionic acid productivity was 0.18 g l⁻¹h⁻¹. A comparative study with glucose and lactic acid as carbon sources showed both less diversity in end-product composition and a 17% and 13% lower propionic acid conversion yield respectively than with glycerol. Increasing the initial glycerol concentration resulted in an enhanced productivity up to 0.36 g l⁻¹h⁻¹ and in a maximal propionic acid concentration of 42 g/l, while a slight decrease of the conversion yield was noticed. Such a propionic acid production rate was similar or higher than the values obtained with lactic acid (0.35 g l⁻¹h⁻¹) or glucose (0.28 g l⁻¹h⁻¹). These results demonstrated that glycerol is a carbon source of interest for propionic acid production. Received: 15 July 1996 / Received revision: 11 November 1996 / Accepted: 11 November 1996     

Bioethanol production in batch mode by a native strain of <Emphasis Type="Italic">Zymomonas mobilis</Emphasis>

Two wild strains of Zymomonas mobilis were isolated (named as ML1 and ML2) from sugar cane molasses obtained from different farms of Santander, Colombia. Initially, selection of the best ethanol-producer strains was carried out using ethanol production parameters obtained with a commercial strain Z. mobilis DSM 3580. Three isolated strains were cultivated in a culture medium containing yeast extract, peptone, glucose and salts, at pH 6 and 32°C with stirring rate of 65 rpm during 62 h. The best results of ethanol production were obtained with the native strain ML1, reaching a maximum ethanol concentration of 79.78 g l⁻¹. ML1 and ML2 strains were identified as Z. mobilis, according to the morphology, biochemical tests and molecular characterization by PCR of specific DNA sequences from Z. mobilis. Subsequently, the effect of different nitrogen sources on production of ethanol was evaluated. The best results were obtained using urea at a 0.73 g/l. In this case, maximum concentration of ethanol was 83.81 g l⁻¹, with kinetic parameters of yield of ethanol on biomass (Y_P/X) = 69.01(g g⁻¹), maximum volumetric productivity of ethanol (Qp_max) = 2.28 (g l⁻¹ h⁻¹), specific productivity of ethanol (q_P) = 3.54 (h⁻¹) and specific growth rate (μ) = 0.12 h⁻¹. Finally, we studied the effect of different culture conditions (pH, temperature, stirring, C/N ratio) with a Placket-Burman′s experimental design. This optimization indicated that the most significant variables were temperature and stirring. In the best culture conditions a significant increase in all variables of response was achieved, reaching a maximum ethanol concentration of 93.55 g l⁻¹.     

Conversion of glycerol to pyruvate by Escherichia coli using acetate- and acetate/glucose-limited fed-batch processes

We report the conversion of glycerol to pyruvate by E. coli ALS929 containing knockouts in the genes encoding for phosphoenolpyruvate synthase, lactate dehydrogenase, pyruvate formate lyase, the pyruvate dehydrogenase complex, and pyruvate oxidase. As a result of these knockouts, ALS929 has a growth requirement of acetate for the generation of acetyl CoA. In steady-state chemostat experiments using excess glycerol and limited by acetate, lower growth rates favored the formation of pyruvate from glycerol (0.60 g/g at 0.10 h⁻¹ versus 0.44 g/g at 0.25 h⁻¹), while higher growth rates resulted in the maximum specific glycerol consumption rate (0.85 g/g h at 0.25 h⁻¹ versus 0.59 g/g h at 0.10 h⁻¹). The presence of glucose significantly improved pyruvate productivity and yield from glycerol (0.72 g/g at 0.10 h⁻¹). In fed-batch studies using exponential acetate/glucose-limited feeding at a constant growth rate of 0.10 h⁻¹, the final pyruvate concentration achieved was about 40 g/L in 36 h. A derivative of ALS929 which additionally knocked out methylglyoxal synthase did not further increase pyruvate productivity or yield, indicating that pyruvate formation was not limited by accumulation of methylglyoxal.     

Influence of agitation and aeration on growth and antibiotic production by <Emphasis Type="Italic">Xenorhabdus nematophila</Emphasis>

The effect of agitation and aeration on the growth and antibiotic production by Xenorhabdus nematophila YL001 grown in batch cultures were investigated. Efficiency of aeration and agitation was evaluated through the oxygen mass transfer coefficient (K _L a). With increase in K _L a, the biomass and antibiotic activity increased. Activity units of antibiotic and dry cell weight were increased to 232 U ml⁻¹ and 19.58 g l⁻¹, respectively, productivity in cell and antibiotic was up more than 30% when K _L a increased from 115.9 h⁻¹ to 185.7 h⁻¹. During the exponential growth phase, DO concentration was zero, the oxygen supply was not sufficient. So, based on process analysis, a three-stage oxygen supply control strategy was used to improved the DO concentration above 30% by controlling the agitation speed and aeration rate. The dry cell weight and activity units of antibiotic were further increased to 24.22 g l⁻¹ and 249 U ml⁻¹, and were improved by 24.0% and 7.0%, compared with fermentation at a constant agitation speed and a constant aeration rate (300 rev min⁻¹, 2.5 l min⁻¹).     

Production of ascorbic acid glucoside by alginate-entrapped mycelia of <Emphasis Type="Italic">Aspergillus niger</Emphasis>

The mycelia of Aspergillus niger, cultivated in a medium containing 45 g l⁻¹ maltose, 66 g l⁻¹ yeast extract, and 5 g l⁻¹ K₂HPO₄ at 30°C and 200 rpm, were used as a biocatalyst in the glucosylation of ascorbic acid. Free mycelia from 3-day-old culture, when used in a 6-h reaction with maltose as the acyl donor, gave 16.07 g l⁻¹ ascorbic acid glucoside corresponding to a volumetric productivity of 2.68 g l⁻¹ h⁻¹ and a conversion of 67%. Mycelia from 3-day-old cultures were entrapped in calcium alginate beads and used as a catalyst in the glucosylation of ascorbic acid. An ascorbic acid-to-maltose molar ratio of 1:9 was found to be optimum, and the conversion reached 75% after 12 h. The concentration of ascorbic acid glucoside produced at this molar ratio was 17.95 g l⁻¹, and the productivity was 1.5 g l⁻¹ h⁻¹. The biocatalyst was repeatedly used in a fixed bed bioreactor for the synthesis of ascorbic acid glucoside and approximately 17 g l⁻¹ of ascorbic acid glucoside corresponding to a volumetric productivity of 1.42 g l⁻¹ h⁻¹ was produced in each use. The conversion was retained at 70% in each use. The entrapped mycelia also exhibited exceptionally high reusability and storage stability. The product was purified to 85% by anion exchange and gel permeation chromatography with a final yield of 75%.