Evaluation of a subject-specific finite-element model of the equine metacarpophalangeal joint under physiological load

The equine metacarpophalangeal (MCP) joint is frequently injured, especially by racehorses in training. Most injuries result from repetitive loading of the subchondral bone and articular cartilage rather than from acute events. The likelihood of injury is multi-factorial but the magnitude of mechanical loading and the number of loading cycles are believed to play an important role. Therefore, an important step in understanding injury is to determine the distribution of load across the articular surface during normal locomotion. A subject-specific finite-element model of the MCP joint was developed (including deformable cartilage, elastic ligaments, muscle forces and rigid representations of bone), evaluated against measurements obtained from cadaver experiments, and then loaded using data from gait experiments. The sensitivity of the model to force inputs, cartilage stiffness, and cartilage geometry was studied. The FE model predicted MCP joint torque and sesamoid bone flexion angles within 5% of experimental measurements. Muscle–tendon forces, joint loads and cartilage stresses all increased as locomotion speed increased from walking to trotting and finally cantering. Perturbations to muscle–tendon forces resulted in small changes in articular cartilage stresses, whereas variations in joint torque, cartilage geometry and stiffness produced much larger effects. Non-subject-specific cartilage geometry changed the magnitude and distribution of pressure and the von Mises stress markedly. The mean and peak cartilage stresses generally increased with an increase in cartilage stiffness. Areas of peak stress correlated qualitatively with sites of common injury, suggesting that further modelling work may elucidate the types of loading that precede joint injury and may assist in the development of techniques for injury mitigation.     

Chronic softening of cartilage without thickening of underlying bone in a joint trauma model

We have recently developed a trauma model to study degradation of the rabbit patello-femoral joint. Our current working hypothesis is that alterations in retropatellar cartilage and underlying bone in our model are initiated independently by acute overstresses developed in each tissue during blunt insult to the joint, and that the processes of chronic degradation in each tissue are not related in a mechanical sense. The current study was conducted in an attempt to help validate our hypothesis by impacting the patello-femoral joint with a padded interface. Based upon earlier human cadaver experiments, we believe this would reduce the acute overstresses in patellar bone while the stresses developed in the overlying retropatellar cartilage would be sufficient enough to initiate a chronic softening of the tissue. Twenty-four animals received an impact to the patello-femoral joint and were sacrificed at either 0, 4.5, or 12 months post-insult. Three acute animals were impacted to develop a simplified computational model to estimate the stresses in joint tissues. The study showed there was a significant softening of the retropatellar cartilage at 4.5 and 12 months post-trauma, compared to unimpacted controls. However, no thickening of the underlying subchondral bone was documented at any timepoint. This was consistent with a reduction of stress in the bone compared to earlier studies, which document thickened subchondral bone post-insult at the same applied impact load. In conclusion, this study helped validate our hypothesis by documenting chronic softening of cartilage without remodeling of the underlying subchondral bone. Furthermore, this study, along with our earlier studies, suggest that impact load alone, which is currently used by the automobile industry to certify new automobiles, is not a good predictor of chronic injuries to a diarthrodial joint, and that simply the addition of padding to impact interfaces may not be adequate to protect occupants from chronic injuries.     

Impact orientation can significantly affect the outcome of a blunt impact to the rabbit patellofemoral joint

This laboratory has developed a subfracture, joint trauma model in rabbits. Using a dropped impact mass directed onto a slightly abducted joint, chronic softening of retropatellar cartilage and thickening of underlying subchondral bone are documented in studies to 1 year post-insult. It has been hypothesized that these tissue changes are initiated by stresses developed during impact loading. A previous analytical study by this laboratory suggests that tensile strains in retropatellar cartilage can be significantly lowered, without significantly changing the intensity of stresses in the underlying subchondral bone, by reorientation of patellar impact more centrally on the joint. In the current study comparative experiments were performed on groups of animals after either an impact directed on the slightly abducted limb or a more central impact. One-year post-trauma in animals subjected to the central-oriented impact no degradation of the shear modulus for the retropatellar cartilage was documented, but the thickness of the underlying subchondral bone was significantly increased. In contrast, alterations in cartilage and underlying bone following impact on the slightly abducted limb were consistent with previous studies. The current experimental investigation showed the sensitivity of post-trauma alterations in joint tissues to slight changes in the orientation of impact load on the joint. Interestingly, for this trauma model thickening of the underlying subchondral plate occurred without mechanical degradation of the overlying articular cartilage. This supports the current laboratory hypothesis that alterations in the subchondral bone and overlying cartilage occur independently in this animal model.     

Three-Dimensional Quantitative Morphometric Analysis (QMA) for In Situ Joint and Tissue Assessment of Osteoarthritis in a Preclinical Rabbit Disease Model

This work utilises advances in multi-tissue imaging, and incorporates new metrics which define in situ joint changes and individual tissue changes in osteoarthritis (OA). The aims are to (1) demonstrate a protocol for processing intact animal joints for microCT to visualise relevant joint, bone and cartilage structures for understanding OA in a preclinical rabbit model, and (2) introduce a comprehensive three-dimensional (3D) quantitative morphometric analysis (QMA), including an assessment of reproducibility. Sixteen rabbit joints with and without transection of the anterior cruciate ligament were scanned with microCT and contrast agents, and processed for histology. Semi-quantitative evaluation was performed on matching two-dimensional (2D) histology and microCT images. Subsequently, 3D QMA was performed; including measures of cartilage, subchondral cortical and epiphyseal bone, and novel tibio-femoral joint metrics. Reproducibility of the QMA was tested on seven additional joints. A significant correlation was observed in cartilage thickness from matching histology-microCT pairs. The lateral compartment of operated joints had larger joint space width, thicker femoral cartilage and reduced bone volume, while osteophytes could be detected quantitatively. Measures between the in situ tibia and femur indicated an altered loading scenario. High measurement reproducibility was observed for all new parameters; with ICC ranging from 0.754 to 0.998. In conclusion, this study provides a novel 3D QMA to quantify macro and micro tissue measures in the joint of a rabbit OA model. New metrics were established consisting of: an angle to quantitatively measure osteophytes (σ), an angle to indicate erosion between the lateral and medial femoral condyles (ρ), a vector defining altered angulation (λ, α, β, γ) and a twist angle (τ) measuring instability and tissue degeneration between the femur and tibia, a length measure of joint space width (JSW), and a slope and intercept (m, Χ) of joint contact to demonstrate altered loading with disease progression, as well as traditional bone and cartilage and histo-morphometry measures. We demonstrate correlation of microCT and histology, sensitive discrimination of OA change and robust reproducibility.     

Chondrocyte damage and contact pressures following impact on the rabbit tibiofemoral joint

Epidemiological studies show that tibial plateau fractures comprise about 10% of all below-knee injuries in car crashes. Studies from this laboratory document that impacts to the tibiofemoral (TF) joint at 50% of the energy producing gross fracture can generate cartilage damage and microcracks at the interface between calcified cartilage and underlying subchondral bone in the tibial plateau. These injuries are suggestive of the initiation for a long term chronic disease, such as osteoarthritis. The disease process may be further encouraged by acute damage to chondrocytes in the cartilage overlying areas of occult microcracking. The hypothesis of the current study was that significant damage to chondrocytes in tibial plateau cartilage could be generated in areas of high contact pressure by a single impact delivered to the rabbit TF joint, without a gross fracture of bone. Three rabbits received a single, 13 J of energy blunt insult to the TF joint, while another three animals were used as controls. Cell viability analyses compared chondrocyte damage in impacted versus control cartilage. Two additional rabbits were impacted to document contact pressures generated in the TF joint. The study showed high contact pressures in uncovered areas of the plateau, with a trend for higher pressures in the lateral versus medial facets. A significantly higher percentage of damaged chondrocytes existed in impacted versus the opposite, nonimpacted limbs. Additionally, more chondrocyte damage was documented in the superficial zone (top 20% of cartilage thickness) of the cartilage compared to middle (middle 50% of thickness) and deep (bottom 30% of thickness) zones. This study showed that a single blunt insult to the in situ rabbit TF joint, generating large areas of contact pressure exceeding 20 MPa, produces significant chondrocyte damage in the tibial articular cartilage, especially in the superficial zone, without gross fracture of bone. Future studies will be needed to investigate the long term, chronic outcome of this blunt force joint trauma.     

Influence of cartilage cap modelling on FEM simulation of femoral head stress]

The present study reports on the finite element analysis (FEA) of the femoral head in a process of preparation for a program for the realistic simulation of correctional osteotomies of the proximal femur. While the material properties have been studied extensively, only few publications consider the influence of the cartilage layer geometry on FE stimulation of the hip joint. Various models of the femoral head with and without the cartilage layer are generated and analysed. On looking at the maximum surface stresses, we found a strong influence of the cartilage layer and the subchondral osseous layer on the magnitude of the von Mises equivalent stress. The model with an anatomically realistic cartilage layer and compact bone shows stresses of between 4 and 5.5 MPa, depending on the position of the joint, while the model with a concentric cartilage layer has a maximum von Mises stress of 0.8 MPa. Only on simulation of a "realistic" cartilage layer, with a maximum thickness at the "pole" and minimum thickness at the "equator" do the changes in stress distribution--determined by changes in the position of the femoral head--become visible. Owing to major artefacts and the inability to create a realistic cartilage layer, voxel-based models of the femur are not suitable for the simulation of the femoral head surface.     

Chronic changes in the rabbit tibial plateau following blunt trauma to the tibiofemoral joint

The knee is often a site of injury that can often lead to a chronic disease known as osteoarthritis (OA). The disease may be initiated, in part, by acute injuries to joint cartilage and its cells. In a recent study by this laboratory, using Flemish Giant rabbits, an impact compressive load on the tibial femoral joint was shown to cause significant levels of acute damage to chondrocytes in cartilage of the medial and lateral tibial plateaus. In the current study, using the same model, histological and mechanical data from the plateaus were documented at 6 and 12 months post impact, and compared to the unimpacted control limbs and a limb from unimpacted, control animals. The mechanical properties of cartilage were measured with indentation relaxation tests on the medial and lateral plateaus in regions covered and uncovered by the meniscus. The histological studies on impacted limbs showed surface lesions on both plateaus, thickening of the underlying subchondral bone at 12 months and numerous occult microcracks at the calcified cartilage–subchondral bone interface at 6 and 12 months, without significant changes in cartilage thickness or its mechanical properties versus controls. Yet, there was an increase in both the matrix and fiber moduli and a decrease in the permeability of uncovered, medial plateau cartilage in both limbs of impacted animals between 6 and 12 months post impact that was not documented in control animals.     

An approach for the stress analysis of transversely isotropic biphasic cartilage under impact load.

Stress analysis of contact models for isotropic articular cartilage under impacting loads shows high shear stresses at the interface with the subchondral bone and normal compressive stresses near the surface of the cartilage. These stress distributions are not consistent, with lesions observed on the cartilage surface of rabbit patellae from blunt impact, for example, to the patello-femoral joint. The purpose of the present study was to analyze, using the elastic capabilities of a finite element code, the stress distribution in more morphologically realistic transversely isotropic biphasic contact models of cartilage. The elastic properties of an incompressible material, equivalent to those of the transversely isotropic biphasic material at time zero, were derived algebraically using stress-strain relations. Results of the stress analysis showed the highest shear stresses on the surface of the solid skeleton of the cartilage and tensile stresses in the zone of contact. These results can help explain the mechanisms responsible for surface injuries observed during blunt insult experiments.     

Icariin accelerates cartilage defect repair by promoting chondrogenic differentiation of BMSCs under conditions of oxygen‐glucose deprivation

This study explored the role played by combined ICA and bone mesenchymal stem cells (BMSCs) in repairing rabbit knee cartilage defects. Firstly, rabbit BMSCs were isolated and used to construct an in vitro cellular model of oxygen‐glucose deprivation/reoxygenation (OGD/R). Subsequently, ICA processing, Alcian blue staining, immunofluorescence and Western blot studies were performed to evaluate the ability of BMSCs to display signs of chondrogenic differentiation. Furthermore, a rabbit knee cartilage injury model was established in vivo. International Cartilage Repair Society (ICRS) macroscopic evaluations, H&E, Alcian blue and EdU staining, as well as immunohistochemistry, were analysed cartilage repair and pathological condition of the knee cartilage tissue. Our in vitro results showed that ICA promoted the chondrogenic differentiation of BMSCs, as well as aggrecan (AGR), bone morphogenetic protein 2 (BMP2) and COL2A1 protein expression in BMSCs. In vivo experiments showed that rabbits in the BMSCs or ICA treatment group had higher ICRS scores and displayed a better restoration of cartilage‐like tissue and chondrocyte expression on the surface of their cartilage defects. In conclusion, ICA or BMSCs alone could repair rabbit knee cartilage damage, and combined treatment with ICA and BMSCs showed a better ability to repair rabbit knee cartilage damage.     

Alterations in structure and properties of collagen network of osteoarthritic and repaired cartilage modify knee joint stresses

Organization of the collagen network is known to be different in healthy, osteoarthritic and repaired cartilage. The aim of the study was to investigate how the structure and properties of collagen network of cartilage modulate stresses in a knee joint with osteoarthritis or cartilage repair. Magnetic resonance imaging (MRI) at 1.5 T was conducted for a knee joint of a male subject. Articular cartilage and menisci in the knee joint were segmented, and a finite element mesh was constructed based on the two-dimensional section in sagittal projection. Then, the knee joint stresses were simulated under impact loads by implementing the structure and properties of healthy, osteoarthritic and repaired cartilage in the models. During the progression of osteoarthritis, characterized especially by the progressive increase in the collagen fibrillation from the superficial to the deeper layers, the stresses were reduced in the superficial zone of cartilage, while they were increased in and under menisci. Increased fibril network stiffness of repair tissue with randomly organized collagen fibril network reduced the peak stresses in the adjacent tissue and strains at the repair–adjacent cartilage interface. High collagen fibril strains were indicative of stress concentration areas in osteoarthritic and repaired cartilage. The collagen network orientation and stiffness controlled the stress distributions in healthy, osteoarthritic and repaired cartilage. The evaluation of articular cartilage function using clinical MRI and biomechanical modeling could enable noninvasive estimation of osteoarthritis progression and monitoring of cartilage repair. This study presents a step toward those goals.     

Knee joint biomechanics in closed-kinetic-chain exercises

Effective management of knee joint disorders demands appropriate rehabilitation programs to restore function while strengthening muscles. Excessive stresses in cartilage/menisci and forces in ligaments should be avoided to not exacerbate joint condition after an injury or reconstruction. Using a validated 3D nonlinear finite element model, detailed biomechanics of the entire joint in closed-kinetic-chain squat exercises are investigated at different flexion angles, weights in hands, femur-tibia orientations and coactivity in hamstrings. Predictions are in agreement with results of earlier studies. Estimation of small forces in cruciate ligaments advocates the use of squat exercises at all joint angles and external loads. In contrast, large contact stresses, especially at the patellofemoral joint, that approach cartilage failure threshold in compression suggest avoiding squatting at greater flexion angles, joint moments and weights in hands. Current results are helpful in comprehensive evaluation and design of effective exercise therapies and trainings with minimal risk to various components.     

A computational algorithm to simulate disorganization of collagen network in injured articular cartilage

Cartilage defects are a known risk factor for osteoarthritis. Estimation of structural changes in these defects could help us to identify high risk defects and thus to identify patients that are susceptible for the onset and progression of osteoarthritis. Here, we present an algorithm combined with computational modeling to simulate the disorganization of collagen fibril network in injured cartilage. Several potential triggers for collagen disorganization were tested in the algorithm following the assumption that disorganization is dependent on the mechanical stimulus of the tissue. We found that tensile tissue stimulus alone was unable to preserve collagen architecture in intact cartilage as collagen network reoriented throughout the cartilage thickness. However, when collagen reorientation was based on both tensile tissue stimulus and tensile collagen fibril strains or stresses, the collagen network architecture was preserved in intact cartilage. Using the same approach, substantial collagen reorientation was predicted locally near the cartilage defect and particularly at the cartilage–bone interface. The developed algorithm was able to predict similar structural findings reported in the literature that are associated with experimentally observed remodeling in articular cartilage. The proposed algorithm, if further validated, could help to predict structural changes in articular cartilage following post-traumatic injury potentially advancing to impaired cartilage function.     

Intra-articular delivery of chondroitin sulfate for the treatment of joint defects in rabbit model

Chondroitin sulfate (CS) is considered as a possible candidate for the treatment of joint defect. This study is to evaluate the efficacy of intra-articular injection of CS carried by hydrogel in the treatment of chondral defects in adult rabbit models. Inclusion of CS (0–50 μg/ml) in in vitro chondrocyte culture exerts a dose-dependent increase in cell proliferation. To select for optimal carrier for in vivo study, the release kinetic of CS embedded in five types of hydrogel was studied using fluorescence technique and their biocompatibilities in vivo were investigated by injecting the CS-hydrogel into rabbit knees. α-CD-EG 4400 hydrogel was chosen as the carrier based on progressively released CS from the hydrogel, with 80% released by in one week while the remaining 20% was retained for 30 days. In vivo studies showed high biocompatibility of CS-hydrogel. To evaluate the efficacy of CS in the treatment of cartilage injury, chondral defects were created in femoral medial condyle (punch diameter 2.7 mm) or trochlea (punch diameter 3.5 mm) of the rabbits without damaging subchondral bone. CS (100 mg/ml) in 0.5 ml α-CD-EG 4400 hydrogel was then injected into the knee joint. Hydrogel and saline served as controls. On day 50 the chondral defect in the saline group showed no signs of healing and defect treated with hydrogel alone was covered with a thin and slightly irregular layer of fibrous tissue. The CS-hydrogel group showed a thicker layer composed of both hyaline and fibrocartilage. The modulus of elasticity was the highest in the CS-hydrogel group and lowest in the group injected with saline only. Our results suggest that intra-articular delivery of CS by α-CD-EG 4400 improved the biomechanical and histological properties of the repaired cartilage. It may be an effective treatment for cartilage injury. Paper presented at ICRS and OARSI.     

Adaptation of subchondral bone in osteoarthritis

Osteoarthritis is a chronic joint disease with pathological changes in the articulating cartilage and all other tissues that occupy the joint. Radin and coworkers have suggested the involvement of subchondral bone in the disease process. However, evidence for an essential role in the etiology has never been proven. Recent studies showing reduced chemical and mechanical properties of subchondral bone in various stages of the disease have invigorated interest in the role of subchondral bone in the development and progression of the disease. The current study showed that the concept of bone adaptation might explain subchondral stiffening, a process where subchondral bone becomes typically sclerotic in osteoarthritis. In addition, we report reduced mechanical matrix tissue properties as well as an increase in denatured collagen content. In conclusion, although osteoarthritic bone tissue contains increased denatured collagen and has reduced matrix mechanical properties, the widely accepted concept of subchondral stiffening is compatible with the process of normal bone adaptation.     

Effect of alendronate on post-traumatic osteoarthritis induced by anterior cruciate ligament rupture in mice

IntroductionPrevious studies in animal models of osteoarthritis suggest that alendronate (ALN) has antiresorptive and chondroprotective effects, and can reduce osteophyte formation. However, these studies used non-physiologic injury methods, and did not investigate early time points during which bone is rapidly remodeled prior to cartilage degeneration. The current study utilized a non-invasive model of knee injury in mice to investigate the effect of ALN treatment on subchondral bone changes, articular cartilage degeneration, and osteophyte formation following injury.MethodsNon-invasive knee injury via tibial compression overload or sham injury was performed on a total of 90 mice. Mice were treated with twice weekly subcutaneous injections of low-dose ALN (40 μg/kg/dose), high-dose ALN (1,000 μg/kg/dose), or vehicle, starting immediately after injury until sacrifice at 7, 14 or 56 days. Trabecular bone of the femoral epiphysis, subchondral cortical bone, and osteophyte volume were quantified using micro-computed tomography (μCT). Whole-joint histology was performed at all time points to analyze articular cartilage and joint degeneration. Blood was collected at sacrifice, and serum was analyzed for biomarkers of bone formation and resorption.ResultsμCT analysis revealed significant loss of trabecular bone from the femoral epiphysis 7 and 14 days post-injury, which was effectively prevented by high-dose ALN treatment. High-dose ALN treatment was also able to reduce subchondral bone thickening 56 days post-injury, and was able to partially preserve articular cartilage 14 days post-injury. However, ALN treatment was not able to reduce osteophyte formation at 56 days post-injury, nor was it able to prevent articular cartilage and joint degeneration at this time point. Analysis of serum biomarkers revealed an increase in bone resorption at 7 and 14 days post-injury, with no change in bone formation at any time points.ConclusionsHigh-dose ALN treatment was able to prevent early trabecular bone loss and cartilage degeneration following non-invasive knee injury, but was not able to mitigate long-term joint degeneration. These data contribute to understanding the effect of bisphosphonates on the development of osteoarthritis, and may support the use of anti-resorptive drugs to prevent joint degeneration following injury, although further investigation is warranted.     

Stress distribution and consolidation in cartilage constituents is influenced by cyclic loading and osteoarthritic degeneration

The understanding of load support mechanisms in cartilage has evolved with computational models that better mimic the tissue ultrastructure. Fibril-reinforced poroelastic models can reproduce cartilage behaviour in a variety of test conditions and can be used to model tissue anisotropy as well as assess stress and pressure partitioning to the tissue constituents. The goal of this study was to examine the stress distribution in the fibrillar and non-fibrillar solid phase and pressure in the fluid phase of cartilage in axisymmetric models of a healthy and osteoarthritic hip joint. Material properties, based on values from the literature, were assigned to the fibrillar and poroelastic components of cartilage and cancellous and subchondral compact bone regions. A cyclic load representing walking was applied for 25 cycles. Contact stresses in the fibrillar and non-fibrillar solid phase supported less than 1% of the contact force and increased only minimally with load cycles. Simulated proteoglycan depletion increased stresses in the radial and tangential collagen fibrils, whereas fibrillation of the tangential fibrils resulted in increased compressive stress in the non-fibrillar component and tensile stress in the radial fibrils. However neither had an effect on fluid pressure. Subchondral sclerosis was found to have the largest effect, resulting in increased fluid pressure, non-fibrillar compressive stress, tangential fibril stress and greater cartilage consolidation. Subchondral bone stiffening may play an important role in the degenerative cascade and may adversely affect tissue repair and regeneration treatments.     

Normal contact of elastic spheres with two elastic layers as a model of joint articulation.

An analytical model of two elastic spheres with two elastic layers in normal, frictionless contact is developed which simulates contact of articulating joints, and allows for the calculation of stresses and displacements in the layered region of contact. Using various layer/layer/substrate combinations, the effects of variations in layer and substrate properties are determined in relation to the occurrence of tensile and shear stresses as the source of crack initiation in joint cartilage and bone. Vertical cracking at the cartilage surface and horizontal splitting at the tidemark have been observed in joints with primary osteoarthritis. Deep vertical cracks in the calcified cartilage and underlying bone have been observed in blunt trauma experiments. The current model shows that cartilage stresses for a particular system are a function of the ratio of contact radius to total layer thickness (a/h). Surface tension, which is observed for a/h small, is alleviated as a/h is increased due to increased load, softening and/or thinning of the cartilage layer. Decreases in a/h due to cartilage stiffening lead to increased global compressive stresses and increased incidence of surface tension, consistent with impact-induced surface cracks. Cartilage stresses are not significantly affected by variations in stiffness of the underlying material. Tensile radial strains in the cartilage layer approach one-third of the normal compressive strains, and increase significantly with cartilage softening. For cases where the middle layer stiffness exceeds that of the underlying substrate, tensile stresses occur at the base of the middle layer, consistent with impact induced cracks in the zone of calcified cartilage and subchondral bone. The presence of the superficial tangential zone appears to have little effect on underlying cartilage stresses.     

Effect of superficial collagen patterns and fibrillation of femoral articular cartilage on knee joint mechanics-a 3D finite element analysis

Collagen fibrils of articular cartilage have specific depth-dependent orientations and the fibrils bend in the cartilage surface to exhibit split-lines. Fibrillation of superficial collagen takes place in osteoarthritis. We aimed to investigate the effect of superficial collagen fibril patterns and collagen fibrillation of cartilage on stresses and strains within a knee joint. A 3D finite element model of a knee joint with cartilage and menisci was constructed based on magnetic resonance imaging. The fibril-reinforced poroviscoelastic material properties with depth-dependent collagen orientations and split-line patterns were included in the model. The effects of joint loading on stresses and strains in cartilage with various split-line patterns and medial collagen fibrillation were simulated under axial impact loading of 1000 N. In the model, the collagen fibrils resisted strains along the split-line directions. This increased also stresses along the split-lines. On the contrary, contact and pore pressures were not affected by split-line patterns. Simulated medial osteoarthritis increased tissue strains in both medial and lateral femoral condyles, and contact and pore pressures in the lateral femoral condyle. This study highlights the importance of the collagen fibril organization, especially that indicated by split-line patterns, for the weight-bearing properties of articular cartilage. Osteoarthritic changes of cartilage in the medial femoral condyle created a possible failure point in the lateral femoral condyle. This study provides further evidence on the importance of the collagen fibril organization for the optimal function of articular cartilage.     

P188 reduces cell death and IGF-I reduces GAG release following single-impact loading of articular cartilage

Prior joint injury predisposes an individual to developing post-traumatic osteoarthritis, for which there is presently no disease modifying treatment. In this condition, articular cartilage degenerates due to cell death and matrix breakdown, resulting in tissue with diminished biomechanical function. P188, a nonionic surfactant, and the growth factor IGF-I have been shown to decrease cell death. Additionally, IGF-I is known to have beneficial effects on cartilage matrix. The objective of this study was to determine the efficacy of P188, IGF-I, and their combination following articular cartilage impact injury with two energy levels, 1.1 J ("low") and 2.8 J ("high"), at 24 h and 1 week. Bovine articular cartilage with attached underlying bone was impacted at the low or high level. Impact sites were explanted and examined immediately, or cultured for 24 h or 1 week in serum-free media supplemented with P188 (8 mgml), IGF-I (100 ngml), or their combination. Gross morphology, cell viability, GAG release to the media, and tissue mechanical properties were assessed. Immediately postimpact, high level impacted tissue had significantly increased gross morphology scores, indicating tissue damage, which were maintained over 1 week. Gross scores following low impact were initially similar to nonimpacted controls, but, at 24 h and 1 week, low impact gross scores significantly increased compared to nonimpacted controls. Additionally, at 24 h, high impact resulted in increased cell death, and both low and high impacts had increased GAG release compared to nonimpacted controls. Furthermore, high impact caused decreased tissue stiffness at 24 h that appeared to worsen over 1 week, evident by the percent decrease from nonimpacted controls increasing from 16% to 26%. No treatment type studied mitigated this loss. The combination did not perform better than either individual treatment; however, following low impact at 1 week, P188 reduced cell death by 75% compared to no treatment and IGF-I decreased GAG release from the tissue by 49%. In conclusion, high impact resulted in immediate tissue changes that worsened over 1 week. Though not causing immediate changes, low impact also resulted in tissue degeneration evident by 24 h. No treatment studied was effective at 24 h, but by 1 week P188 and IGF-I ameliorated established detrimental changes occurring in articular cartilage postimpact. However, further work is needed to optimize treatment strategies to prevent and/or reverse cell death and matrix destruction in a way that maintains tissue mechanical properties, and hence its functionality.     

The effect of the sagittal ridge angle on cartilage stress in the equine metacarpo-phalangeal (fetlock) joint

Fatigue failure of bones of the metacarpo-phalangeal (fetlock, MCP) joint is common in thoroughbred racehorses. Stresses within the fetlock joint cartilages are affected by the morphology of the third metacarpal bone (MC3) and proximal phalangeal bone, and the steepness of the median sagittal ridge of MC3 is believed to be associated with fracture. This study investigated the influence of the steepness of the sagittal ridge on cartilage stress distribution using a finite element model of the joint. Changes to the steepness of the sagittal ridge were made by applying a parabolic function to the mesh, creating four different models with sagittal ridge angles ranging from 95° to 105°. In the fetlock joint of Thoroughbred racehorses, sagittal ridge angles of >100° were associated with higher Von Mises stresses in cartilage at the palmar aspect of the condylar groove than such stresses in joints with sagittal ridge angles of <100°. Stresses were high in the specific region where fractures are known to originate in MC3. This aspect of morphology of the fetlock joint thus appears to play an important role in the magnitude and distribution of cartilage stresses, which, when acting on the underlying hard tissues of the articular calcified cartilage and subchondral bone may play a role in the initiation of fatigue fracture in the third metacarpal bone.