Peptide models of protein metastable binding sites: competitive kinetics of isomerization and hydrolysis

alpha 2-Macroglobulin and the complement components C3 and C4 each contain a metastable binding site that is essential for covalent attachment. Two cyclic peptides are useful models of these unusual protein sites. Five-membered lactam 1 (CH3CO-Gly-Cys-Gly-Glu-Glp-Asn-NH2) contains an internal residue of pyroglutamic acid (Glp). Fifteen-membered thiolactone 2 (CH3CO-Gly-Cys-Gly-Glu-Glu-Asn-NH2 15-thiolactone) contains a thiol ester bond between Cys-2 and Glu-5. These isomeric hexapeptides are spontaneously interconverted in water. Competing with the two isomerization reactions are three reactions involving hydrolysis of 1 and 2. These five processes were found to occur simultaneously under physiologic conditions (phosphate-buffered saline, pH 7.3, 37 degrees C). Best estimates of the five rate constants for these apparent first-order reactions were obtained by comparing the observed molar percentages of peptides 1-4 with those calculated from a set of exponential equations. Both isomerization reactions (ring expansion of 1 to 2, k1 = 6.4 X 10(-5) s-1; ring contraction of 2 to 1, k-1 = 69 X 10(-5) s-1) proceeded faster than any of the hydrolysis reactions: alpha-cleavage of 1 with fragmentation to form dipeptide 3 (k2 = 3.3 X 10(-5) s-1), gamma-cleavage of 1 with ring opening to yield mercapto acid 4 (k3 = 0.35 X 10(-5) s-1), and hydrolysis of 2 with ring opening to give 4 (k4 = 1.9 X 10(-5) s-1). The isomerization rate ratio (k1/k-1 = 10.9) agreed with the isomer ratio at equilibrium (1:2 = 11 starting from 1 and 10 starting from 2). The alpha/gamma regioselectivity ratio (k2/k3 = 9.7) for hydrolysis of the internal Glp residue of 1 was consistent with results for model tripeptides. Part of the chemistry of the protein metastable binding sites can be explained by similar isomerization and hydrolysis reactions.     

Pyrimidodiazepine, a ring-strained cofactor for phenylalanine hydroxylase

Homologues of 6-methyl-7,8-dihydropterin (6-Me-7,8-PH2) and 6-methyl-5,6,7,8-tetrahydropterin (6-Me-PH4), expanded in the pyrazine ring, were synthesized to determine the effect of increased strain on the chemical and enzymatic properties of the pyrimidodiazepine series. 2-Amino-4-keto-6-methyl-7,8-dihydro-3H,9H-pyrimido[4,5-b] [1,4]diazepine (6-Me-7,8-PDH2) was found to be more unstable in neutral solution than 6-Me-7,8-PH2. Its decomposition appears to proceed by hydrolytic ring opening of the 5,6-imine bond, followed by autooxidation. 6-Me-7,8-PDH2 can be reduced, either chemically or by dihydrofolate reductase (Km = 0.16 mM), to the 5,6,7,8-tetrahydro form (6-Me-PDH4). This can be oxidized with halogen to quinoid dihydropyrimidodiazepine (quinoid 6-Me-PDH2), which is a substrate for dihydropteridine reductase (Km = 33 microM). Whereas quinoid 6-methyldihydropterin was found to tautomerize to 6-Me-7,8-PH2 in 95% yield in 0.1 M tris(hydroxymethyl)aminomethane hydrochloride (Tris-HCl), pH 7.4, quinoid 6-Me-PDH2 gives only 53% 6-Me-7,8-PDH2, the remainder decomposing via an initial opening of the diazepine ring. Additional evidence for the extra strain in the pyrimidodiazepine system is the cyclization of quinoid 6-N-(2'-aminopropyl)divicine to quinoid 6-Me-PH2 in 57% yield in 0.1 M Tris-HCl, pH 7.4. By comparison, no quinoid 6-Me-PDH2 is formed from the homologue quinoid 6-N-(3'-aminobutyl)divicine. A small (2%) yield of 6-Me-PDH4 is found if the unstable C4a-carbinolamine intermediate is trapped by enzymatic dehydration and reduction. Although phenylalanine hydroxylase utilizes 6-Me-PDH4 (Km = 0.15 mM), the maximum velocity of tyrosine production is 20 times slower than that with 6-Me-PH4, indicating that a ring opening reaction is not a rate-limiting step in the hydroxylase pathway. Further, the maximum velocities of 2,5,6-triamino-4(3H)-pyrimidinone, 2,6-diamino-5-(methylamino)-4(3H)-pyrimidinone, and 2,6-diamino-5-(benzylamino)-4(3H)-pyrimidinone span a 35-fold range. These cofactors would theoretically form the same oxide of quinoid divicine if oxygen activation involves a carbonyl oxide intermediate. Thus, the limiting step is also not transfer of oxygen from this hypothetical intermediate to the phenylalanine substrate.     

Ring opening is not rate-limiting in the GTP cyclohydrolase I reaction

GTP cyclohydrolase I catalyzes a mechanistically complex ring expansion affording dihydroneopterin triphosphate and formate from GTP. Single turnover quenched flow experiments were performed with the recombinant enzyme from Escherichia coli. The consumption of GTP and the formation of 5-formylamino-6-ribosylamino-2-amino-4(3H)-pyrimidinone triphosphate, formate, and dihydroneopterin triphosphate were determined by high pressure liquid chromatography analysis. A kinetic model comprising three consecutive unimolecular steps was used for interpretations where the first intermediate, 5-formylamino-6-ribosylamino-2-amino-4(3H)-pyrimidinone 5'-triphosphate, was formed in a reversible reaction. The rate constant k(1) for the reversible opening of the imidazole ring of GTP was 0.9 s(-1), the rate constant k(3) for the release of formate from 5-formylamino-6-ribosylamino-2-amino-4(3H)-pyrimidinone triphosphate was 2.0 s(-1), and the rate constant k(4) for the formation of dihydroneopterin triphosphate was 0.03 s(-1). Thus, the hydrolytic opening of the imidazole ring of GTP is rapid by comparison with the overall reaction.     

Aromatic ring cleavage of a β-biphenyl ether dimer catalyzed by lignin peroxidase of phanerochaete chrysosporium

Under aerobic conditions homogeneous lignin peroxidase catalyzed the oxidation of 1-(4'-methoxyphenyl)-2-(2″,5′-dimethoxy-4″-phenylphenoxy)-1,3-dihydroxypropane (I) to yield four products: 1-(4'-methoxy-phenyl)-1,2,3-trihydroxypropane (X), 4-[-hydroxy--(4'-methoxyphenyl)-methyl]-1,3-dioxolane-2-one (V), 4-(4'-methoxyphenyl)-5-hydroxymethyl-1,3-dioxolane-2-one (VI) and 5-hydroxy-5-carbomethoxy-4-phenyl-oxol-3-en-2-one (VIII). V, VI and VIII are all products of ring opening reactions. When the reaction was conducted under anaerobic conditions, the substrate was oxidized but no ring-cleaved products were detected. During the oxidation of I, 4 atoms of ¹⁸O from ¹⁸O₂ were incorporated into the lactol product VIII.     

Synthesis and cyclooxygenase inhibitory activities of linear 1-(methanesulfonylphenyl or benzenesulfonamido)-2-(pyridyl)acetylene regioisomers

A group of 1-(aminosulfonylphenyl and methylsulfonylphenyl)-2-(pyridyl)acetylene regioisomers were designed such that a COX-2 SO2NH2 pharmacophore was located at the para-position of the phenyl ring, or a SO2Me pharmacophore was placed at the ortho-, meta- or para-position of the phenyl ring, on an acetylene template (scaffold). The point of attachment of the pyridyl ring to the acetylene linker was simultaneously varied (2-pyridyl, 3-pyridyl, 4-pyridyl, 3-methyl-2-pyridyl) to determine the combined effects of positional, steric, and electronic substituent properties upon COX-1 and COX-2 inhibitory potency and COX isozyme selectivity. These target linear 1-(phenyl)-2-(pyridyl)acetylenes were synthesized via a palladium-catalyzed Sonogashira cross-coupling reaction. Structure-activity relationship (SAR) data (IC50 values) acquired by determination of the in vitro ability of the title compounds to inhibit the COX-1 and COX-2 isozymes showed that the position of the COX-2 SO2NH2 or SO2Me pharmacophore on the phenyl ring, and the point of attachment of the pyridyl ring to the acetylene linker, were either individual, or collective, determinants of COX-2 inhibitory potency and selectivity. A number of compounds discovered in this study, particularly 1-(4-aminosulfonylphenyl)-2-(3-methyl-2-pyridyl)acetylene (22), 1-(3-methanesulfonylphenyl)-2-(2-pyridyl)acetylene (27), 1-(3-methanesulfonylphenyl)-2-(4-pyridyl)acetylene (29), 1-(4-methanesulfonylphenyl)-2-(2-pyridyl)acetylene (30), and 1-(4-methanesulfonylphenyl)-2-(3-pyridyl)acetylene (31), exhibit potent (IC50 = 0.04-0.33 microM range) and selective (SI = 18 to >312 range) COX-2 inhibitory activities, that compare favorably with the reference drug celecoxib (COX-2 IC50 = 0.07 microM; COX-2 SI = 473). The sulfonamide (22), and methylsulfonyl (27 and 31), compounds exhibited anti-inflammatory activities (ID50 = 59.9-76.6 mg/kg range) that were intermediate in potency between the reference drugs aspirin (ID50 = 128.7 mg/kg) and celecoxib (ID50 = 10.8 mg/kg).     

Reactions of benzocyclobutene chromium complexes with carbon, nitrogen and oxygen nucleophiles: nucleophilic addition and unexpected proximal ring opening reactions

Tricarbonyl(η⁶-1-oxobenzocyclobutene)chromium(0) (1) can be transformed to tricarbonyl(η⁶-1-endo-hydroxybenzocyclobutene) chromium(0) derivatives with substituents R (R=CH₃, CH=CH₂, (CH₂)₄CH=CH₂, (CH₂)₄OSi(Me)₂tBu) at Cl on the exo face of the complex. The relative configuration is proven by an X-ray crystal structure analysis of the trimethylsilyl ether 8 (C₁₆H₁₈CrO₄Si: a=8.693(1), b=9.490(1), c=11.063(1) Å, =97.51(1), β=110.32(1), γ=95.38(1)°, triclinic, space group P (No.2), R=0.037, R_w=0.052 for 4609 observed reflections. Attempts directed at an intramolecular cycloaddition of the ortho-quinodimethane complex derived from 17 by anion promoted ring opening unexpectedly resulted in the formation of 12 as the product of an opening of the proximal bond of the anellated ring located between the hydroxy group and the coordinated aromatic ring in 16. The fact that the intermolecular cycloaddition reaction for 16 is possible in the presence of a dienophile is taken as evidence for an equilibrium between the alcoholate 17 and the two ring opened products 16 and 18. The proximal ring opening of 6 is not observed when the free organic ligand 21 is used as the educt. Ketone complexes 1 and 25 undergo proximal ring opening reaction when treated with alcoholate or primary amines.     

Synthesis, anticancer activity, and iron affinity of the Actinoplanes metabolite 7,8-dihydroxy-1-methylnaphtho[2,3-c]furan-4,9-dione

The first synthesis of 7,8-dihydroxy-1-methylnaphtho[2,3-c]furan-4,9-dione (1), an isofuranonaphthoquinone produced by an Actinoplanes strain is described. Lactone ring opening of 6-methylfuro[3,4-c]furan-1(3H)-one (4) with ortho-lithiated veratrole (3), oxidation of product alcohol 5, and Friedel-Crafts acylation of the resulting aroylcarboxylic acid 7 afforded the mono methyl ether 2 of the target compound. The latter was obtained by demethylation of 2 with BBr(3) in 14% overall yield. While mono ether 2 was distinctly more cytotoxic than catechol 1 against a panel of five cancer cell lines, only the latter showed a siderophore-like binding affinity for Fe(III) with a complex dissociation constant K(D) of approximately 10(-29) M(3) (pM = 25.9).     

Crystal structure of L-2-oxothiazolidine-4-carboxylic acid

Crystals of the title compound, L-2-oxothiazolidine-4-carboxylic acid, OTC (C4H5NO3S), grown from an aqueous solution are orthorhombic, space group P2(1)2(1)2(1) with the following cell parameters at 22 +/- 3 degrees: a = 5.381(1), b = 5.961(1), c = 17.929(3)A, V = 575.1A(3), Mr = 146.2, Dc = 1.688 g.cm-3, mu = 43.9 cm-1 and Z = 4. The crystal structure was solved by the application of direct methods and refined to an R value of 0.032 for 596 reflections with I greater than 3 sigma(I). The thiazolidine ring adopts a "twist" conformation. This structure contains a short (2.619(3)A) intermolecular hydrogen bond between the carboxyl OH and the oxygen of the 2-oxo moiety, a feature common to most acyl amino acids and acyl peptides.     

Study of 1-deoxy-1-(indol-3-yl)-L-sorbose, 1-deoxy-1-(indol-3-yl)-L-tagatose,and their analogs

Alkaline degradation of the ascorbigen 2-C-[(indol-3-yl)methyl]-alpha-L-xylo-hex-3-ulofuranosono-1,4-lactone (1a) led to a mixture of 1-deoxy-1-(indol-3-yl)-L-sorbose (2a) and 1-deoxy-1-(indol-3-yl)-L-tagatose (3a). The mixture of diastereomeric ketoses underwent acetylation and pyranose ring opening under the action of acetic anhydride in pyridine in the presence of 4-dimethylaminopyridine (DMAP) with the formation of a mixture of (E)-2,3,4,5,6-penta-O-acetyl-1-deoxy-1-(indol-3-yl)-L-xylo-hex-1-enitol (4a) and (E)-2,3,4,5,6-penta-O-acetyl-1-deoxy-1-(indol-3-yl)-L-lyxo-hex-1-enitol (5a), which were separated chromatographically. Deacetylation of 4a or 5a afforded cyclised tetrols, tosylation of which in admixture resulted in 1-deoxy-1-(indol-3-yl)-3,5-di-O-tosyl-alpha-L-sorbopyranose (12a) and 1-deoxy-1-(indol-3-yl)-4,5-di-O-tosyl-alpha-L-tagatopyranose (13a). Under alkaline conditions 13a readily formed 2-hydroxy-4-hydroxymethyl-3-(indol-3-yl)cyclopenten-2-one (15a) in 90% yield. Similar transformations were performed for N-methyl- and N-methoxyindole derivatives.     

The X-ray structure and absolute configuration of the anticancer drug (+)-4-ketocyclophosphamide

4-Ketocyclophosphamide (4-keto CP), C7H12Cl2N2O3P, monoclinic, P2(1), a = 11.909 (2), b = 10.254 (1), c = 9.873 (1) A, beta = 91.08 (1) degrees, V = 1205.45 (3) A3 Z = 4, Dc = 1.51 Mg-m-3, Cu K alpha, lambda = 1.54178 A, alpha 25 = +53.8 degrees (c = 3.0, MeOH), m.p. 107 degrees C, mu = 61.8 cm-1, F (000) = 564, R = 0.064 for 2961 observed reflexions with I greater than 1.96 sigma(I). Dextrarotatory enantiomer of 4-keto CP has S configuration at the stereogenic center. One of the two crystallographically independent molecules is disordered both in a six-membered ring and in --N(CH2CH2Cl)2 moiety. With the exception of a less populated conformer of a disordered molecule, 4-keto CP molecules adopt a conformation in which 1,3,2-oxazophosphorinane ring is in the sofa form with C(6) deviating from the plane through the remaining five ring atoms while an exocyclic N atom with its three substituents is nearly coplanar with the phosphoryl oxygen atom O(8). In a less populated conformer, the six membered ring takes the form of sofa with C(5) as a flap while an exocyclic N atom and its substituents are oriented toward the P--N(3) bond.     

Reaction of (bromoacetamido)nucleoside affinity labels with ribonuclease A: evidence for steric control of reaction specificity and alkylation rate

Four new bromoacetamido pyrimidine nucleosides have been synthesized and are affinity labels for the active site of bovine pancreatic ribonuclease A (RNase A). All bind reversibly to the enzyme and react covalently with it, resulting in inactivation. The binding constants Kb and the first-order decomposition rate constants k3 have been determined for each derivative. They are the following: 3'-(bromoacetamido)-3'-deoxyuridine, Kb = 0.062 M, k3 = 3.3 X 10(-4) s-1; 2'-(bromoacetamido)-2'-deoxyxylofuranosyluracil, Kb = 0.18 M, k3 = 1700 X 10(-4) s-1; 3'-(bromoacetamido)-3'-deoxyarabinofuranosyluracil, Kb = 0.038 M, k3 = 6.6 X 10(-4) s-1; and 3'-(bromoacetamido)-3'-deoxythymidine, Kb = 0.094 M, k3 = 2.7 X 10(-4) s-1. 3'-(Bromoacetamido)-3'-deoxyuridine reacts exclusively with the histidine-119 residue, giving 70% of a monoalkylated product substituted at N-1, 14% of a monoalkylated derivative substituted at N-3, and 16% of a dialkylated species substituted at both N-1 and N-3. Both 2'-(bromoacetamido)-2'-deoxyxylofuranosyluracil and 3'-(bromoacetamido)-3'-deoxyarabinofuranosyluracil react with absolute specificity at N-3 of the histidine-12 residue. 3'-(Bromoacetamido)-3'-deoxythymidine alkylates histidines-12 and -119. The major product formed in 57% yield is substituted at N-3 of histidine-12. A monoalkylated derivative, 8% yield, is substituted at N-1 of histidine-119. A disubstituted species is formed in 14% yield and is alkylated at both N-3 of histidine-12 and N-1 of histidine-119. A specific interaction of the "down" 2'-OH group, unique to 3'-(bromoacetamido)-3'-deoxyuridine, serves to orient the 3'-bromoacetamido residue close to the imidazole ring of histidine-119. The 2'-OH group of 3',5'-dinucleoside phosphate substrates may serve a similar role in the catalytic mechanism, allowing histidine-119 to protonate the leaving group in the transphosphorylation step. (Bromoacetamido)nucleosides are bound in the active site of RNase A in a variety of distinct conformations which are responsible for the different specificities and alkylation rates.     

Structure and conformation of peptides containing the sulfonamide junction. II. Synthesis and conformation of cyclo[-MeTau-Phe-DPro-]

By applying the method of amino-acyl incorporation to sulfonamido peptides, cyclo(-MeTau-Phe-DPro-) 3 has been synthesized in high yield starting from Z-MeTau-Phe-Pro-OH. The crystal structure and the molecular conformation of 3 have been determined. Crystals are orthorhombic, s.g. P2(1)2(1)2(1), with a = 5.454, b = 13.486, c = 24.025 A. The structure has been solved by direct methods and refined to R = 0.039 for 1974 reflections with I greater than 1.5 sigma (I). The 10-measured cyclopeptide adopts a backbone conformation in the crystals characterized by Phe-DPro and DPro-MeTau peptide bonds in trans and cis conformation, respectively. Both the peptide bonds deviate significantly from planarity and the corresponding [delta omega[ values are ca. 12 degrees. The sulfonamide SO2NH junction adopts a cisoidal conformation with a C alpha 1-S1-N2-C alpha 2 torsion angle of 70.8 degrees. 13C n.m.r. data show that the trans geometry at the Phe-DPro junction found in the crystals is retained in DMSO solution. The 10-membered ring of 3 is characterized by a pseudo mirror-plane passing through the Phe nitrogen and the DPro carbonylic carbon. The DPro ring adopts a half-chair conformation. The Phe side chain conformation corresponds to the statistically most favored g- rotamer (chi 1 = -68.6 degrees). The crystal packing is characterized by a weak intermolecular hydrogen bond between NH group and the MeTau O1' oxygen.     

Intercalation of proflavine and a platinum derivative of proflavine into double-helical Poly(A)

The equilibria and kinetics of the interactions of proflavine (PR) and its platinum-containing derivative [PtCl(tmen)(2)HNC(13)H(7)(NHCH(2)CH(2))(2)](+) (PRPt) with double-stranded poly(A) have been investigated by spectrophotometry and Joule temperature-jump relaxation at ionic strength 0.1 M, 25 degrees C, and pH 5.2. Spectrophotometric measurements indicate that base-dye interactions are prevailing. T-jump experiments with polarized light showed that effects due to field-induced alignment could be neglected. Both of the investigated systems display two relaxation effects. The kinetic features of the reaction are discussed in terms of a two-step series mechanism in which a precursor complex DS(I) is formed in the fast step, which is then converted to a final complex in the slow step. The rate constants of the fast step are k(1) = (2.5 +/- 0.4) x 10(6) M(-1) s(-1), k(-1) = (2.4 +/- 0.1) x 10(3) s(-1) for poly(A)-PR and k(1) = (2.3 +/- 0.1) x 10(6) M(-1) s(-1), k(-1) = (1.6 +/- 0.2) x 10(3) s(-1) for poly(A)-PRPt. The rate constants for the slow step are k(2) = (4.5 +/- 0.5) x 10(2) s(-1), k(-2) = (1.7 +/- 0.1) x 10(2) s(-1) for poly(A)-PR and k(2) = 9.7 +/- 1.2 s(-1), k(-2) = 10.6 +/- 0.2 s(-1) for poly(A)-PRPt. Spectrophotometric measurements yield for the equilibrium constants and site size the values K = (4.5 +/- 0.1) x 10(3) M(-1), n = 1.3 +/- 0.5 for poly(A)-PR and K = (2.9 +/- 0.1) x 10(3) M(-1), n = 2.3 +/- 0.6 for poly(A)-PRPt. The values of k(1) are similar and lower than expected for diffusion-limited reactions. The values of k(-1) are similar as well. It is suggested that the formation of DS(I) involves only the proflavine residues in both systems. In contrast, the values of k(2) and k(-2) in poly(A)-PRPt are much lower than in poly(A)-PR. The results suggest that in the complex DS(II) of poly(A)-PRPt both proflavine and platinum residues are intercalated. In addition, a very slow process was detected and ascribed to the covalent binding of Pt(II) to the adenine.     

Regioselective and stereospecific cleavage of a terminal oxirane system: a novel synthetic approach to lipid mediator congeners--1,2(2,3)-diacyl-3(1)-halo-sn-glycerols

Glycidyl esters upon treatment with a mixture of carboxylic acid anhydride (CAA) and trimethylsilyl halide (TMSX) in the presence of tetra-n-butylammonium halide (Bu(4)NX, X=Cl, Br or I) undergo stereospecific and regioselective opening of the oxirane ring to afford mixed-(or mono)-acid 1,2(2,3)-diacyl-3(1)-halo-sn-glycerols in high yields.     

A metal-mediated hydride shift mechanism for xylose isomerase based on the 1.6 A Streptomyces rubiginosus structures with xylitol and D-xylose

The crystal structure of recombinant Streptomyces rubiginosus D-xylose isomerase (D-xylose keto-isomerase, EC 5.3.1.5) solved by the multiple isomorphous replacement technique has been refined to R = 0.16 at 1.64 A resolution. As observed in an earlier study at 4.0 A (Carrell et al., J. Biol. Chem. 259: 3230-3236, 1984), xylose isomerase is a tetramer composed of four identical subunits. The monomer consists of an eight-stranded parallel beta-barrel surrounded by eight helices with an extended C-terminal tail that provides extensive contacts with a neighboring monomer. The active site pocket is defined by an opening in the barrel whose entrance is lined with hydrophobic residues while the bottom of the pocket consists mainly of glutamate, aspartate, and histidine residues coordinated to two manganese ions. The structures of the enzyme in the presence of MnCl2, the inhibitor xylitol, and the substrate D-xylose in the presence and absence of MnCl2 have also been refined to R = 0.14 at 1.60 A, R = 0.15 at 1.71 A, R = 0.15 at 1.60 A, and R = 0.14 at 1.60 A, respectively. Both the ring oxygen of the cyclic alpha-D-xylose and its C1 hydroxyl are within hydrogen bonding distance of NE2 of His-54 in the structure crystallized in the presence of D-xylose. Both the inhibitor, xylitol, and the extended form of the substrate, D-xylose, bind such that the C2 and C4 OH groups interact with one of the two divalent cations found in the active site and the C1 OH with the other cation. The remainder of the OH groups hydrogen bond with neighboring amino acid side chains. A detailed mechanism for D-xylose isomerase is proposed. Upon binding of cyclic alpha-D-xylose to xylose isomerase, His-54 acts as the catalytic base in a ring opening reaction. The ring opening step is followed by binding of D-xylose, involving two divalent cations, in an extended conformation. The isomerization of D-xylose to D-xylulose involves a metal-mediated 1,2-hydride shift. The final step in the mechanism is a ring closure to produce alpha-D-xylulose. The ring closing is the reverse of the ring opening step. This mechanism accounts for the majority of xylose isomerase's biochemical properties, including (1) the lack of solvent exchange between the 2-position of D-xylose and the 1-pro-R position of D-xylulose, (2) the chemical modification of histidine and lysine, (3) the pH vs. activity profile, and (4) the requirement for two divalent cations in the mechanism.     

Conformation and formation tendency of the cyclotetrapeptide cyclo (D-Pro-D-Pro-L-Pro-L-Pro): experimental results and molecular modeling studies

The title compound represents the smallest member of cyclic proline peptides corresponding to the general formula c(DDLL-Pro4)n with a strictly D,D,L,L double-alternating sequence of the chiral amino acid residues. The cyclopeptides with n greater than or equal to 2 could be synthesized from both DDLL-Pro4 (1) and DLLD-Pro4 (2). The cyclic monomer (n = 1) resulted only from 2, whereas not even a trace could be found by cyclization of 1. The peptide exists in a strongly strained Ci symmetrical conformation (x-ray analysis) with alternating cis and trans peptide bonds (ctct form I). The cis peptide bonds deviate from planarity (omega = 22 degrees); two of the pyrrolidine rings show a "South" conformation (phi = -94 degrees), whereas the other residues exhibit C alpha-endo puckering (phi = -124 degrees). Two of the psi angles surprisingly occur at +41 degrees (anti-cis'), the others are located in the trans' region. A quantitative ring opening occurs with trifluoroacetic acid at room temperature. In solution the existence of an isomeric ctcc sequence (form Ia) is indicated. Dreiding model studies also suggested a favorable conformation with a tctc sequence (form II). Consequently, we performed molecular mechanics calculations, based on the CHARMM force field and semiempirical quantum mechanical AM1 calculations (MOPAC program). Pronounced differences in the backbone parameters were found using these two methods. However, the theoretical studies evidenced the experimentally obtained differences in the cyclization tendencies of the linear precursors.     

Synthesis and antiviral activity evaluation of novel 2-phenyl-4-(D-arabino-4'-cycloaminobutyl)triazoles: acyclonucleosides containing unnatural bases

Five 2-phenyl-4-(D-arabino-4'-cycloamino-3'-hydroxy-O-1',2'-isopropylidene-butyl)-2H-1,2,3-triazoles, acyclonucleosides containing unnatural bases have been synthesised by opening of the epoxide ring of 2-phenyl-4-(D-arabino-3',4'-epoxy-O-1',2'-isopropylidenebutyl)-2H-1,2,3-triazole with the corresponding cyclic amines in 70-85% yields. The starting arabino-epoxytriazole was prepared in five steps starting from D-glucose in an overall yield of 15%. All the five triazolylacyclonucleosides were unambiguously identified on the basis of their spectral data. The structure of one of the intermediates, that is 2-phenyl-4-(D-arabino-1',2',3',4'-tetrahydroxybutyl)-2H-1,2,3-triazole was confirmed by its X-ray crystallographic studies. These acyclonucleosides were subjected to antiviral activity evaluation in CEM-SS cell-based anti HIV assay with the lymphocytropic virus strains HIV-1(IIIB) and HIV-1(RF).     

The structure of 2-methoxy-5-(2',3',4'-trimethoxyphenyl)tropone, an effective analog of colchicine

-Methoxy-5-(2',3',4'-trimethoxyphenyl) tropone is an active analog of colchicine, a mitotic spindle inhibitor, which is missing the middle "B" ring. This compound crystallizes in the triclinic system, space group P1, with Z = 2; a = 10.135(2), b = 10.166 (4), and c = 7.863(2) A; alpha = 82.15(3), beta = 103.49(3), and gamma = 107.16(2); degrees and V = 750.7(4) A. The structure was solved by direct methods and refined by full-matrix least-squares to a final R = 0.063, using 2503 observed reflections and 271 parameters. Despite the absence of the middle ring, the conformation of the molecule is similar to that of colchicine, isocolchicine , and their derivatives. The troponoid ring is dissimilar to the phenyl ring in that it is not aromatic and does have alternating short and long bond lengths. The dihedral angle between the least-squares planes of the two rings is -57.4 degrees. Van der Waals surface representations of the analog and colchicine are presented to demonstrate the similarity and differences of these two molecules . The structural information of the analog is consistent with the interpretation of thermodynamic parameters which govern the interactions between brain tubulin and the analog.     

Design and synthesis of 1,3-diarylurea derivatives as selective cyclooxygenase (COX-2) inhibitors

A group of 1,3-diarylurea derivatives, possessing a methylsulfonyl pharmacophore at the para-position of the N-1 phenyl ring, in conjunction with a N-3 substituted-phenyl ring (4-F, 4-Cl, 4-Me, 4-OMe), were designed and synthesized for evaluation as selective cyclooxygenase-2 (COX-2) inhibitors. In vitro COX-1/COX-2 isozyme inhibition structure-activity studies identified 1-(4-methylsulfonylphenyl)-3-(4-methoxyphenyl) urea (4e) as a potent COX-2 inhibitor (IC(50)=0.11 microM) with a high COX-2 selectivity index (SI=203.6) comparable to the reference drug celecoxib (COX-2 IC(50)=0.06 microM; COX-2 SI=405). The structure-activity data acquired indicate that the urea moiety constitutes a suitable scaffold to design new acyclic 1,3-diarylurea derivatives with selective COX-2 inhibitory activity.     

Synthesis of radioiodine-labeled 2-phenylethyl 1-thio-beta-D-galactopyranoside for imaging of LacZ gene expression

A potent inhibitor of beta-galactosidase (EC 3.2.1.23), 2-phenylethyl 1-thio-beta-D-galactopyranoside (PETG), was radioiodinated for noninvasive imaging of LacZ gene expression. In order to introduce radioiodine to the phenyl ring of PETG, 2-(4-bromophenyl)ethanethiol was prepared and attached to the C-1 position of beta-D-galactose pentaacetate under conditions that resulted in the exclusive formation of the beta anomer. The bromo group of PETG was converted to the tributylstannyl group where radioiododemetallation was carried out. Radioiodine-labeled PETG tetraacetate was purified by HPLC, which can be used as a prodrug for biological evaluation or hydrolyzed to 2-(4-[123I/125I]iodophenyl)ethyl 1-thio-beta-D-galactopyranoside ([123I/125I]7) under basic conditions. The resulting radioiodine-labeled PETG was obtained in overall 62% radiochemical yield (decay-corrected) and with specific activity of 46-74 GBq/micromol.