An interleukin-6 ZnO/SiO(2)/Si surface acoustic wave biosensor

A novel high sensitivity ZnO/SiO(2)/Si Love mode surface acoustic wave (SAW) biosensor for the detection of interleukin-6 (IL-6), is reported. The biosensors operating at 747.7MHz and 1.586GHz were functionalized by immobilizing the monoclonal IL-6 antibody onto the ZnO biosensor surface both through direct surface adsorption and through covalent binding on gluteraldehyde. The morphology of the IL-6 antibody-protein complex was studied using scanning electron microscopy (SEM), and the mass of the IL-6 protein immobilized on the surface was measured from the frequency shift of the SAW resonator biosensor. The biosensor was shown to have extended linearity, which was observed to improve with higher sensor frequency and for IL-6 immobilization through the monoclonal antibody. Preliminary results of biosensor measurements of low levels of IL-6 in normal human serum are reported. The biosensor can be fully integrated with CMOS Si chips and developed as a portable real time detection system for the interleukin family of proteins in human serum.     

Methods of chemical immobilization of an enzyme on a solid support]

Carbonic anhydrase was immobilized on a polymer thermoplastic to promote gaseous CO2 hydration into bicarbonate ions. Catalyst immobilization was realized through a series of chemical reactions enabling enzyme covalent binding to polyamide support. Different initial enzyme concentrations of 0.25, 0.50, 0.75, 1, and 2 mg/ml were verified. Different techniques were developed to assess enzyme attachment. The amount of bound protein was determined using Bradford dosage of proteins remaining in solution following CA II incubation with solid support. ELISA has given a qualitative evaluation of the protein, enabling a follow up of enzyme binding robustness as a function of time. p-nitrophenyl acetate hydrolysis and CO2 hydration were assessed by spectrophotometry and electrometry, respectively. The percentage of active enzyme following immobilization was measured using an esterase linear model. Catalytic transformation rates for gaseous CO2 hydration were calculated for each type of immobilization.     

Enhancing immunoassay detection of antigens with multimeric protein Gs

This paper describes a method for the effective and self-oriented immobilization of antibodies on magnetic silica-nanoparticles using a multimeric protein G. Cysteine-tagged recombinant dimers and trimers of protein G were produced in Escherichia coli BL21 by repeated linking of protein G monomers with a flexible (GGGGS)(3) linker. Amino-functionalized silica-coated magnetic nanoparticles (SiO(2)-MNPs, Fe(3)O(4)@SiO(2)) were prepared and coupled to the protein G multimers, giving the final magnetic immunosensor. The optimal conditions for the reaction between the protein Gs and the SiO(2)-MNPs was a time of 60 min and a concentration of 100 μg/mL, resulting in coupling efficiencies of 77%, 67% and 55% for the monomeric, dimeric and trimeric protein Gs, respectively. Subsequently, anti-hepatitis B surface antigen (HBsAg) was immobilized onto protein G-coupled SiO(2)-MNPs. The quantitative efficiency of antibody immobilization found the trimeric protein G to be the best, followed by the dimeric and monomeric proteins, which differs from the coupling efficiencies. Using all three protein constructs in an HBsAg fluoroimmunoassay, the lowest detectable concentrations were 500, 250 and 50 ng/mL for the monomeric, dimeric and trimeric protein G-coupled SiO(2)-MNPs, respectively. Therefore, multimeric protein Gs, particularly the trimeric form, can be employed to improve antibody immobilization and, ultimately, enhance the sensitivity of immunoassays. In addition, the multimeric protein Gs devised in this study can be utilized in other immunosensors to bind the antibodies at a high efficiency and in the proper orientation.     

Detection of protein-protein interactions on SiO2/Si surfaces by spectroscopic ellipsometry

We have applied spectroscopic ellipsometry to sensitive detection of specific protein-protein interactions on SiO2/Si substrates. First, the change of ellipticity of the reflected polarized light (600-1100 nm) was correlated with the thickness of the protein layer immobilized on SiO2/Si surfaces by measuring monomeric (myoglobin) and homotetrameric (hemoglobin) proteins with a similar monomer size. Protein-protein interactions were then measured with the antigen/antibody and cell-surface receptor/ligand systems; in each system either of the two proteins was bound to SiO2/Si substrates. Consequently, significant ellipticity changes were observed only for the cases where the interactions were specific. A specific antibody binding was also detectable with an antigen displayed on the surface of bacteriophage particles. These results show the usefulness of spectroscopic ellipsometry for sensitive detection of protein-protein interactions and its applicability to a detection method for the protein-based biochips to be developed in the future.     

Immobilization of homooligonucleotide probe layers onto Si/SiO(2) substrates: characterization by electrochemical impedance measurements and radiolabelling

Radiolabelling and electrochemical impedance measurements were used to characterize the immobilization of single stranded homooligonucleotides onto silica surfaces and their subsequent hybridization with complementary strands. The immobilization procedure consists of grafting an epoxysilane onto microelectronic grade Si/SiO(2) substrates, and coupling oligonucleotides bearing a hexylamine linker onto the epoxy moiety. Radiolabelling was used as a reference method to quantify the amount of immobilized and hybridized oligonucleotides. These results show that the Si/SiO(2) substrates modified with an epoxysilane yield a surface concentration of approximately 10(11) strands/cm(2) for the immobilized oligonucleotides, after vigorous washings, and that approximately 36% of these undergo hybridization with complementary strands. The impedance measurements, which provide a direct means of detecting variations in electrical charge accumulation across the semiconductor/oxide/electrolyte structure when the oxide surface is chemically modified, show that the semiconductor's flat band potential undergoes reproducible shifts of -150 and -100 mV following the immobilization and the hybridization step, respectively. These results demonstrate that electrochemical impedance measurements using chemically modified semiconductor/oxide/electrolyte structures of this type offer a viable alternative for the direct detection of complementary DNA strands upon hybridization.     

Use of thiol-terminal silanes and heterobifunctional crosslinkers for immobilization of antibodies on silica surfaces

A procedure for covalent immobilization of functional proteins on silica substrates was developed using thiol-terminal silanes and heterobifunctional cross-linkers. Using this procedure, a high density of functional antibodies was bound to glass cover slips and silica fibers. The amount of anti-IgG antibody immobilized was determined to be in the range of 0.66 to 0.96 ng/mm2 using radiolabeled antibody. The relative amount of IgG antigen bound by the immobilized antibody (0.37 to 0.55 mol antigen/mol antibody) was three to five times greater than other investigators have reported. In addition, the amount of protein nonspecifically adsorbed to the antibody-coated surface was further reduced by the addition of blocking agents so that nonspecific adsorption of protein antigens represented only 2-6% of the total antigen binding. With this low background, IgG antigen binding could be measured at levels as low as 150 fmol when an antigen concentration of 3 pmol/ml was applied. The process for antibody immobilization is straightforward, easy to perform, and adaptable for modifying mass quantities of biosensor components.     

Protein immobilization on plasma-polymerized ethylenediamine-coated glass slides

For protein chip construction, protein immobilization on the surface of the glass slide is essential. It was previously reported that glass slides are embedded with chemicals that contain primary amines and aldehydes for protein immobilization. We fabricated a plasma-polymerized ethylenediamine (PPEDA)-coated slide that exposed primary amines. For the plasma polymer deposition on the glass slide, the inductively coupled plasma (ICP) power was found to be a critical factor in sustaining a high density of amine on the surface of the PPEDA films. We prepared PPEDA-coated slides at three different ICP powers (3, 30, or 70 W). In the slide that was prepared at a low ICP power (3 W), we detected a high density of primary amine. Therefore, the fluorescein isothiocyanate-conjugated immunoglobulin G (IgG) was highly immobilized to the PPEDA-coated slide that was prepared at the low ICP power. For protein immobilization, 1-ethyl-3-[3-dimethylaminopropyl]carbodiimide hydrochloride (EDC) was used as a cross-linker. The immobilization of the protein to the PPEDA-coated slide was carried out by consecutive incubations with 1 mg/ml EDC for 5 min and 0.1 mg/ml IgG for 1 h. This efficiently produced the functionally active protein-immobilized slide. Therefore, this work shows that the plasma technique can be applied to produce a high-quality glass surface for the immobilization of proteins and other materials.     

用于丙型肝炎病毒抗原测定的SiO_2载体的制备及其性质分析

为了优化将抗体偶联在二氧化硅试管表面上以便进行丙型肝炎抗原检测的分析系统,本研究通过氨基硅烷的活化作用,在玻璃表面形成活化的氨基,以戊二醛作为化学交联试剂,在已硅化的玻璃表面固定丙肝单克隆抗体,并进行丙肝抗原(HCAg)的测定。结果显示,通过条件优化实验,发现以10%(V/V)的氨基硅烷水溶液处理玻璃试管3h后,再用3%(V/V)的戊二醛水溶液交联丙肝单克隆抗体2h,可以得到固定效果较好,非特异性较低的玻璃载体,对HCAg可测至1μg/L。可见,用该方法制备的玻璃载体可为进一步建立新的HCAg磁性免疫检测系统提供理论和实验依据。     

A chemically modified glass surface that facilitates transglutaminase-mediated protein immobilization

An amino-modified glass surface for enzymatic protein immobilization by microbial transglutaminase (MTG) was developed. Diamine substrates with secondary amino groups in the linker moiety, like triethylenetetramine (TETA), exhibited at most a 2-fold higher reactivity in the MTG-catalyzed reaction compared to those with the alkyl linker. A 96-well glass plate was subsequently modified with selected diamine substrates. Validation of the modified surface by enzymatic immobilization of enhanced green fluorescent protein tagged with a glutamine donor-substrate peptide (LLQG) of MTG revealed that the protein loading onto the TETA-modified glass surface was approximately 15-fold higher than that on the unmodified one.     

Fabrication of an antibody microwell array with self-adhering antibody binding protein

One of the promising methods of preparing antibody arrays is immobilizing antibodies with protein A or protein G, each of which binds specifically to the heavy chain constant (Fc) region of immunoglobulin G (IgG). In this system, antibody immobilization efficiency depends on the number of active Fc binding proteins that need to be immobilized on the surface. Here we have designed and constructed an Fc binding protein with a self-adhering ability that can be immobilized on the hydrophobic surface by simple adsorption. It consists of an Fc binding domain of protein G (G3) and hydrophobic domain of elastin (E72). Direct observation revealed its self-adhering ability on the hydrophobic surface. The enzyme-linked immunosorbent assay (ELISA) showed that it retained antibody binding ability on the surface. The antibody array model was prepared on a hydrophobic microwell glass slide with E72G3, which specifically detect the antigen with a sevenfold greater sensitivity than the G3-treated slide. These results suggest that the E72G3 is useful for simple and effective immobilization of antibodies and can be used to fabricate any immuno devices.     

Immobilization of oriented protein molecules on poly(ethylene glycol)-coated Si(111)

A high-density poly(ethylene glycol) (PEG)-coated Si(111) surface is used for the immobilization of polyhistidine-tagged protein molecules. This process features a number of properties that are highly desirable for protein microarray technology: (i) minimal nonspecific protein adsorption; (ii) highly uniform surface functionality; (iii) controlled protein orientation; and (iv) highly specific immobilization reaction without the need of protein purification. The high-density PEG-coated silicon surface is obtained from the reaction of a multi-arm PEG (mPEG) molecule with a chlorine terminated Si(111) surface to give a mPEG film with thickness of 5.2 nm. Four out of the eight arms on each immobilized mPEG molecule are accessible for linking to the chelating iminodiacetic acid (IDA) groups for the binding of Cu(2+) ions. The resulting Cu(2+)-IDA-mPEG-Si(111) surface is shown to specifically bind 6x histidine-tagged protein molecules, including green fluorescent protein (GFP) and sulfotransferase (ST), but otherwise retains its inertness towards nonspecific protein adsorption. We demonstrate a particular advantage of this strategy: the possibility of protein immobilization without the need of prepurification. Surface concentrations of relevant chemical species are quantitatively characterized at each reaction step by X-ray photoelectron spectroscopy (XPS). This kind of quantitative analysis is essential in tuning surface concentration and chemical environment for optimal sensitivity in probe-target interaction.     

Ag/SiO2 core-shell nanoparticle-based surface-enhanced Raman probes for immunoassay of cancer marker using silica-coated magnetic nanoparticles as separation tools

A simple, sensitive and highly specific immunoassay has been developed based on surface-enhanced Raman scattering for human alpha-fetoprotein (AFP), a tumor marker for the diagnosis of hepatocellular carcinoma. This strategy combines the Ag/SiO2 core-shell nanoparticles embedded with rhodamine B isothiocyanate dye molecules as Raman tags and the amino group modified silica-coated magnetic nanoparticle as immobilization matrix and separation tool. In the proposed system, a sandwich-type immunoassay was performed between polyclonal antibody functionalized Ag/SiO2 nanoparticle-based Raman tags and monoclonal antibody modified silica-coated magnetic nanoparticles. The presence of the analyte and the reaction between the antigen and antibody can be monitored by the Raman spectra of the Ag/SiO2 tags. Compared to the previous surface-enhanced Raman immunoassays, the main advantage of this strategy lies in two aspects. One is the high stability of Raman tags derived from the silica shell-coated silver core-shell nanostructure. The other is the use of silica-coated magnetic nanoparticles as immobilization matrix and separation tool, thus avoiding complicated pretreatment and washing steps. We have studied in detail the experimental parameters such as the effects of the antibody concentration modified on the Raman tags and on the magnetic particles, and the immunoreaction time. Using this strategy, concentration of human AFP up to 0.12 microg/ml was detected with a detection limit of 11.5 pg/ml.     

A noninstrumental Immunoassay based on colloidal dyes

Detecting labels based on water dispersions of colloidal textile dyes were developed that are useful in various analytical and diagnostic test systems for a simple visual assessment of the assay. Colored water-insoluble particles of dyes were used for the sorptional immobilization of streptavidin on their surface. The resulting streptavidin-dye (STR-DYE) complexes possessed a high visualizing capacity and were used for the combined detection of pesticides (simazine and 2,4-dichlorophenoxyacetic acid) by noninstrumental immunoassay (DYE-comb-assay, competitive dot-immunoassay in the comb format). The detection limits and the duration of our DYE-comb-assay (4 ng/ml, 20-25 min), HRP-comb-assay (competitive dot-immunoassay in the comb format using the enzymic conjugate of STR with horseradish peroxidase) (16 ng/ml), and the traditional competitive ELISA (12-16 ng/ml, 1.5 h) were compared. This DYE-comb-assay is simple enough and can be used under field conditions.     

An investigation of antibody immobilization methods employing organosilanes on planar ZnO surfaces for biosensor applications

One critical aspect for the development of label-free immunosensors is the employment of highly uniform and repeatable antibody immobilization techniques. In this study, we investigated the use of two different silane molecules (3-glycidyloxypropyl)trimethoxysilane (GPS), and (3-mercaptopropyl)trimethoxysilane (MTS) for the immobilization of fluorescently labeled IgG antibodies on planar ZnO surfaces. The chemical modification of the surfaces was investigated using water contact angle measurements, AFM, and fluorescence microscopy. The results of the water contact angle measurements indicate increased surface hydrophobicity after treatment with GPS and MTS as compared to the control. Surface modification was further verified through AFM measurements which demonstrate an increased surface roughness and particle height after treatment with antibodies. The results of the fluorescence studies indicate that the immobilization protocol employing MTS produced 21% higher fluorescence on average with greater uniformity than the GPS-based protocol, which indicates a higher overall density in antibody coverage on the surface of the ZnO. Acoustic sensor tests were employed to confirm the functionality of sensors treated with the MTS protocol. The results indicate that the immobilization protocol imparts sensitivity and specificity to the ZnO-based devices.     

Detection of insulin-antibody binding on a solid surface using imaging ellipsometry

Imaging ellipsometry (IE) was used to detect the binding of insulin to its antibody on a solid surface. The modification of a gold surface with 11-mecaptoundecanoic acid (11-MUA), the adsorption of protein G, and antibody immobilization onto the protein G layer were confirmed by surface plasmon resonance. Ellipsometric images and ellipsometric angles of the surface antibody were acquired using the IE system by off-null ellipsometry. Ellipsometric images of antigen binding to the antibody were acquired, and their mean optical intensities estimated. Changes in mean optical intensity indicated that the detection range for insulin was from 10 ng/ml to 100 microg/ml.     

Immobilization and direct electrochemistry of glucose oxidase on a tetragonal pyramid-shaped porous ZnO nanostructure for a glucose biosensor

A tetragonal pyramid-shaped porous ZnO (TPSP-ZnO) nanostructure is used for the immobilization, direct electrochemistry and biosensing of proteins. The prepared ZnO has a large surface area and good biocompatibility. Using glucose oxidase (GOD) as a model, this shaped ZnO is tested for immobilization of proteins and the construction of electrochemical biosensors with good electrochemical performances. The interaction between GOD and TPSP-ZnO is examined by using AFM, N(2) adsorption isotherms and electrochemical methods. The immobilized GOD at a TPSP-ZnO-modified glassy carbon electrode shows a good direct electrochemical behavior, which depends on the properties of the TPSP-ZnO. Based on a decrease of the electrocatalytic response of the reduced form of GOD to dissolved oxygen, the proposed biosensor exhibits a linear response to glucose concentrations ranging from 0.05 to 8.2mM with a detection limit of 0.01mM at an applied potential of -0.50V which has better biosensing properties than those from other morphological ZnO nanoparticles. The biosensor shows good stability, reproducibility, low interferences and can diagnose diabetes very fast and sensitively. Such the TPSP-ZnO nanostructure provides a good matrix for protein immobilization and biosensor preparation.     

A noninstrumental immunoassay based on colloidal dyes

Detecting labels based on water dispersions of colloidal textile dyes were developed that are useful in various analytical and diagnostic test systems for a simple visual assessment of the assay. Colored water-insoluble particles of dyes were used for the sorptional immobilization of streptavidin on their surface. The resulting streptavidin-dye (STR-DYE) complexes possessed a high visualizing capacity and were used for the combined detection of pesticides (simazine and 2,4-dichlorophenoxyacetic acid) by noninstrumental immunoassay (DYE-comb-assay, competitive dot-immunoassay in the comb format). The detection limits and the duration of our DYE-comb-assay (4 ng/ml, 20–25 min), HRP-comb-assay (competitive dot-immunoassay in the comb format using the enzymic conjugate of STR with horseradish peroxidase) (16 ng/ml), and the traditional competitive ELISA (12–16 ng/ml, 1.5 h) were compared. This DYE-comb-assay is simple enough and can be used under field conditions.     

Immobilization of galactose ligands on acrylic acid graft-copolymerized poly(ethylene terephthalate) film and its application to hepatocyte culture

Surface modification of argon-plasma-pretreated poly(ethylene terephthalate) (PET) films via UV-induced graft copolymerization with acrylic acid (AAc) was carried out. Galactosylated surfaces were then obtained by coupling a galactose derivative (1-O-(6'-aminohexyl)-D-galactopyranoside) to the AAc graft chains with the aid of a water-soluble carbodiimide (WSC) and N-hydroxysulfosuccinimide (sulfo-NHS). The modified PET films were characterized by X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and water contact-angle measurements. The galactosylated PET films were used as substrates for hepatocyte culture. The effects of surface carboxyl group concentration on the extent of galactose ligand immobilization, the extent of hepatocyte attachment, and the surface morphology were investigated. The amount of the galactose ligands immobilized on the PET surface increased with the AAc polymer graft concentration. AFM images revealed that the surface roughness of the PET film increased after graft copolymerization with AAc, but did not change appreciably with the subsequent immobilization of the galactose ligands. At the surface carboxyl group concentration of about 0.56 micromol/cm(2) or galactose ligand concentration of about 0.51 micromol/cm(2), the hepatocyte culture on the galactosylated surface exhibited the optimum concentration and physiological functions and formed aggregates or spheroids after just 1 day of culture. The albumin and urea synthesis functions of these hepatocytes were comparable to or higher than those of the hepatocytes cultured on the collagen-modified PET substrates.     

Immobilization of γ-glutamyl transpeptidase,a membrane enzyme,in gel beads via liposome entrapment

Bovine kidney γ-glutamyl transpeptidase, a membrane enzyme, was immobilized in gel beads by application of the method of Wallstén et al. (Biochim. Biophys. Acta, 982, 47–52, 1989). The gel beads were equilibrated with a dispersion of the enzyme, phospholipids, and cholate and subsequently dialyzed against a buffer for reconstitution and immobilization of enzyme-bound liposomes in the pores of the beads. From the standpoints of the immobilized contents of protein and phospholipids and of the reactivity of γ-glutamyl transpeptidase, a dialysis buffer of Tris-HCl (pH 7.5), a phospholipid concentration of 45 mg/ml in the enzyme-phospholipid-cholate dispersion, and the use of Sepharose CL-6B as the support gel were found to be most appropriate for the immobilization of γ-glutamyl transpeptidase, γ-Glutamyl transpeptidase was activated and stabilized by reconstitution in liposomes. In operation with a packed bed reactor, liposome-bound γ-glutamyl transpeptidase immobilized in Sepharose CL-6B exhibited relatively stable and constant activity for 12 h. In addition, it was found that enzyme substrates were able to pass through the pores of the gel beads to interact with the enzyme present on the outer surface of the liposome membrane in the gel beads. These results thus indicated that a novel support made up of liposomes and Sepharose CL-6B would permit efficient immobilization of lipid-requiring and/or membrane enzymes.     

Study on orientation of immunoglobulin G on protein G layer

A comparative study of immunoglobulin G (IgG) immobilization was performed, both on a thiolated protein G layer, where this immobilization was due to affinity binding with an Fc fragment of IgG, and on 11-mercaptoundecanoic acid (11-MUA), where the immobilization was due to chemical bonding. The change of IgG layer formation on the two base layers as a function of the IgG concentration was investigated by surface plasmon resonance (SPR), atomic force microscopy (AFM) in a non-contact mode, and spectroscopic ellipsometry (SE). It was observed that the IgG layer was immobilized more evenly on the thiolated protein G layer than on the 11-MUA layer, based on the SPR measurements. The surface topology analysis by AFM indicated that the IgG layer was immobilized on the protein G layer according to the envelope profile of the base layer. Based on the SE analysis, it was determined that the IgG layer thickness on the thiolated protein G layer increased with increasing IgG concentration. Based on the above analyses, the scheme for orientation of IgG immobilized on the thiolated protein G layer was proposed.