Antibody-mediated targeting of liposomes to erythrocytes in the whole blood

F(ab′)₂ fragments derived from anti-rat erythrocyte antibody or normal rabbit serum IgG were covalently attached to the surface of liposomes consisting of equimolar amounts of egg phosphatidylcholine and cholesterol. These liposomes were interacted with rat, monkey or mouse blood, and their binding to both red and white blood cells was determined. Results of these studies show that coupling of liposomes to anti-rat erythrocyte F(ab′)₂ considerably enhances their binding to erythrocytes in rat blood. However, no such increase in the binding was observed with rat leukocytes or monkey and mouse erythrocytes. Besides, the interactions between the liposomes and target cells did not affect the permeability properties of the liposome bilayer. These observations indicate that liposomes coupled to cell-specific antibodies may serve as highly useful carriers for homing of drugs/enzymes to specific cells in biophase.     

Aggregation of ligand-modified liposomes by specific interactions with proteins. II: Biotinylated liposomes and antibiotin antibody

The aggregation of biotinylated phospholipid vesicles (liposomes) cross-linked by antibiotin IgG was studied experimentally and theoretically. The liposomes were either low density liposomes that contained 0.4 mol% biotinylated phospholipid ( approximately 100 exposed biotin molecules per liposome), or high density liposomes that contained 2.7 mol% biotinylated phospholipid ( approximately 1000 exposed biotin molecules per liposome). The solution turbidity and mean particle size measured by quasi-elastic light scattering (QLS) were monitored throughout the aggregation. Three different lots of antibiotin antibodies, each with different association constants and binding heterogeneities, were used. The antibody binding characteristics affected the aggregation rates. The aggregation kinetics were analyzed using a model based on the Smoluchowski theory of aggregation, fractal concepts of aggregate microstructure, and Rayleigh and Mie light scattering theory. The experimental conditions of liposome concentration, protein concentration, and ligand density under which aggregation occurred correlated well with calculated sticking probabilities based on isotherms describing the adsorption of antibiotin antibody to the liposomes. These results are compared with prior observations made when avidin was used as the cross-linking protein. (c) 1996 John Wiley & Sons, Inc.     

Production of antibodies that bind biotin and inhibit biotin containing enzymes.

Methods were developed for the coupling of biotin to bovine serum albumin and bovine gamma-globulin using a water-soluble carbodimide. The use of [14-C]biotin as a tracer allowed quantitation of the incorporation of biotin into the conjugates: 2.55 mol of biotin was incorporated per mol of gamma-globulin and 7-9 mol of biotin was incorporated per mol of serum albumin in different preparations. These conjugates were highly immunogenic in the rabbit and anti-bodies reactive with the biotinyl group itself could be detected by their ability to precipitate the heterologous biotinated carrier but not the unmodified heterologous carrier. There antisera rapidly inactivated transcarboxylase and pyruvate carboxylase and this inactivation could be blocked by pretreatment of the antisera with biotin or biocytin. Using enzyme inhibition to detect free antibody, the binding constant for biotin was found to be 5.0 x 10- minus 8 M and that for biocytin 3.5 x 10- minus 8 M.     

Analysis of several fluorescent detector molecules for protein microarray use

The utility of several streptavidin‐linked fluorescent detector molecules was evaluated on two protein microarray platforms. Tested detector molecules included: Alexa Fluor 546; R‐phycoerythrin (RPE), orange fluospheres; Cy3‐containing liposomes (Large Unilamellar Vesicles, LUV) labelled with Cy3; and an RPE–antibody complex. The two array architectures tested consisted of an array of murine Fc–biotin and an array of murine IgG (the murine IgG array was probed with a biotinylated rabbit anti‐murine IgG). These platforms allowed for the direct comparison of detector utility by detector recognition of array‐bound biotin. All of the fluorescent detectors examined demonstrated utility on each of the array platforms. For the Fc–biotin array, detector signal intensity (background adjusted) was as follows: RPE–antibody complex > fluospheres > RPE > liposomes > Alexa 546: for the IgG array: RPE/antibody complex > RPE > fluospheres > Alexa546 > liposomes. The RPE–antibody complex fluoresced 67% and 150% more intensely than the next closest detector molecule for the Fc–biotin and the murine IgG arrays, respectively. A marked increase in background fluorescence (as compared to RPE alone) did not accompany the increase in signal intensity gained through RPE–antibody complex use (a true increase in signal:noise ratio). These results suggest that the RPE–antibody complex is superior to other molecules for fluorescent detection of analytes on protein microarrays. Copyright © 2002 John Wiley & Sons, Ltd.     

The use of biotin-streptavidin systems for enhancing the parameters of immunometric analysis

The possibility of improving analytical parameters of the immunometric assay with the use of biotinylated antibodies and biotin-streptavidin complexes in comparison with the commonly known approach of direct antibody modification with 125I has been studied. Experiments have been carried out with the use of low-affinity antibodies (Kass approximately 10(9) M-1) to ferritin. The signal-to-noise ratio in the immunometric increases 2.3 times when streptavidin labeled with horse-radish peroxidase is used and 4.3 times when the preformed streptavidin + biotin-peroxidase complex is used in comparison with assay systems based on 125I-labeled antibodies. The improvement of assay parameters of immunochemical systems by means of biotin-streptavidin complexes has been found to permit the use of low-affinity antibodies as assay reagents, thus ensuring analytical parameters attaining or close to those of immunoradiometric assay systems based on high-affinity 125I-labeled antibodies (Kass approximately 10(10) M-1). As shown in this study, the following factors ensure the signal enhancement in biotin-streptoavidin systems: (a) the biotin modification of several lysin residues per IgG molecule, the optimum extent of modification being 3-4 residues per molecule; (b) mild procedure for biotinylation. In contrast to oxidative iodination, the modification of NH2 groups with biotin esters does not significantly affect their antigen-binding properties.     

Easily reversible desthiobiotin binding to streptavidin,avidin, and other biotin-binding proteins: uses for protein labeling,detection, and isolation

The high-affinity binding of biotin to avidin, streptavidin, and related proteins has been exploited for decades. However, a disadvantage of the biotin/biotin-binding protein interaction is that it is essentially irreversible under physiological conditions. Desthiobiotin is a biotin analogue that binds less tightly to biotin-binding proteins and is easily displaced by biotin. We synthesized an amine-reactive desthiobiotin derivative for labeling proteins and a desthiobiotin-agarose affinity matrix. Conjugates labeled with desthiobiotin are equivalent to their biotinylated counterparts in cell-staining and antigen-labeling applications. They also bind to streptavidin and other biotin-binding protein-based affinity columns and are recognized by anti-biotin antibodies. Fluorescent streptavidin conjugates saturated with desthiobiotin, but not biotin, bind to a cell-bound biotinylated target without further processing. Streptavidin-based ligands can be gently stripped from desthiobiotin-labeled targets with buffered biotin solutions. Thus, repeated probing with fluorescent streptavidin conjugates followed by enzyme-based detection is possible. In all applications, the desthiobiotin/biotin-binding protein complex is easily dissociated under physiological conditions by either biotin or desthiobiotin. Thus, our desthiobiotin-based reagents and techniques provide some distinct advantages over traditional 2-iminobiotin, monomeric avidin, or other affinity-based techniques.     

Temperature control of biotin binding and release with A streptavidin-poly(N-isopropylacrylamide) site-specific conjugate.

The many laboratory and diagnostic applications utilizing streptavidin as a molecular adaptor rely on its high affinity and essentially irreversible interaction with biotin. However, there are many situations where recovery of the biotinylated molecules is desirable. We have previously shown that poly(N-isopropylacrylamide) (PNIPAAm), a temperature-sensitive polymer, can reversibly block biotin association as the polymer's conformation changes at its lower critical solution temperature (LCST). Here, we have constructed a streptavidin-PNIPAAm conjugate which is able to bind biotin at room temperature or lower and release bound biotin at 37 degrees C. The conjugate can repeatedly bind and release biotin as temperature is cycled through the LCST. A genetically engineered streptavidin mutant, E116C, which has only one cysteine residue, was conjugated site specifically via the sulfhydryl groups with a PNIPAAm that has pendent sulfhydryl-reactive vinyl sulfone groups. The conjugation site is near the tryptophan 120 residue, which forms a van der Waals contact with biotin that is important in generating the large binding free energy. The temperature-induced conformational change of the polymer at position 116 may lead to structural changes in the region of tryptophan 120 that are responsible for the reversible binding between biotin and the conjugated streptavidin.     

S-layer-coated liposomes as a versatile system for entrapping and binding target molecules

In the present study, unilamellar liposomes coated with the crystalline bacterial cell surface layer (S-layer) protein of Bacillus stearothermophilus PV72/p2 were used as matrix for defined binding of functional molecules via the avidin- or streptavidin-biotin bridge. The liposomes were composed of dipalmitoyl phosphatidylcholine, cholesterol and hexadecylamine in a molar ratio of 10:5:4 and they had an average size of 180 nm. For introducing specific functions into the S-layer lattice without affecting substances encapsulated within the liposomes, crosslinking and activation reagents had to be identified which did not penetrate the liposomal membrane. Among different reagents, a hydrophilic dialdehyde generated by periodate cleavage of raffinose and a sulfo-succinimide activated dicarboxylic acid were found to be impermeable for the liposomal membrane. Both reagents completely crosslinked the S-layer lattice without interfering with its regular structure. Biotinylation of S-layer-coated liposomes was achieved by coupling p-diazobenzoyl biocytin which preferably reacts with the phenolic residue of tyrosine or with the imidazole ring of histidine. By applying this method, two biotin residues accessible for subsequent avidin binding were introduced per S-layer subunit. As visualized by labeling with biotinylated ferritin, an ordered monomolecular layer of streptavidin was formed on the surface of the S-layer-coated liposomes. As a second model system, biotinylated anti-human IgG was attached via the streptavidin bridge to the biotinylated S-layer-coated liposomes. The biological activity of the bound anti-human IgG was confirmed by ELISA.     

Photoswitching of ligand association with a photoresponsive polymer-protein conjugate

Light-regulated molecular switches that reversibly control biomolecular function could provide new opportunities for controlling activity in diagnostics, affinity separations, bioprocessing, therapeutics, and bioelectronics applications. Here we show that site-specific conjugation of light-responsive polymers near the biotin-binding pocket of streptavidin provides control of ligand binding affinity in response to UV and visible light irradiation. Two different light-responsive polymers were utilized that display opposite photoresponsive solubility changes under UV or visible (vis) light irradiation in aqueous solutions. At 40 degrees C, the N,N-dimethylacrylamide (DMA)-co-4-phenylazophenyl acrylate (AZAA) copolymer (DMAA) was soluble under UV irradiation and precipitated under visible light, while the DMA-co-N-4-phenylazophenyl acrylamide (AZAAm) copolymer (DMAAm) was soluble under visible irradiation and precipitated under UV light. Both polymers were synthesized with a vinyl sulfone terminus and conjugated to the Glu116Cys (E116C) streptavidin mutant via thiol coupling. The DMAA-streptavidin conjugate bound biotin efficiently when the polymer was in the soluble state under UV irradiation, but under visible irradiation, the polymer collapsed and blocked free biotin association. Furthermore, if biotin was allowed to bind when the polymer was in the soluble state under UV irradiation, then when the polymer was collapsed by visible light, the streptavidin released the bound biotin. The DMAAm-streptavidin conjugate showed the opposite response, with association of biotin allowed under visible light irradiation and blocked under UV irradiation. The photoresponses of the streptavidin conjugates thus correspond to the original photoresponsive phase transition properties of the polymer switches triggered by the cis-trans isomerization of the diazo chromophores.     

A dot-blot method for quantification of apurinic/apyrimidinic sites in DNA using an avidin plate and liposomes encapsulating a fluorescence dye

A dot-blot method for quantification of apurinic/apyrimidinic (AP) sites in genomic DNA (calf thymus DNA) is described using an avidin-modified glass slip and biotinylated liposomes containing sulforhodamine B as a fluorescence marker. Aldehyde reactive probe (ARP)-tagged DNA was found to be strongly adsorbed on an avidin slip, even if treated with ethanolamine and biotin, with an efficiency of 51% due to the positive surface charge of avidin, and unbound ARP was easily washed out of the surface with Milli-Q water. In the assay protocol, calf thymus DNA containing AP sites is reacted with ARP in solution and immobilized on an ethanolamine- and biotin-treated avidin slip (EAB-avidin slip), followed by incubation with streptavidin. The AP sites were finally quantified with biotinylated liposomes containing 1.5 mM sulforhodamine B as a fluorescence marker. The mean fluorescence intensity over the surface of the slip was an analytically relevant measure of the amount of AP sites in calf thymus DNA. By using the dot-blot assay, 1-5 AP sites per 10(4) nucleotides in 5 and 100 ng of DNA were quantified. The current dot-blot method has potential for quantification of AP sites in genomic DNA at a level of several nanograms.     

Generic liposome reagent for immunoassays

We have derivatized liposomes with antibodies by using avidin to crosslink biotinylated phospholipid molecules in the liposome membranes with biotinylated antibody molecules. A comparison of the biotin binding activity of avidin in solution and avidin associated with liposomes shows that avidin bound to biotinylated phospholipid in liposome membranes retains full binding activity for additional biotin molecules. Changes in the fluorescence spectrum of avidin have been used to characterize the binding capacity of avidin for biotin in solution, and change in intensity of light scattered due to aggregation of liposomes was used to measure the biotin binding activity of avidin associated with liposomes. Relative amounts of the biotinylated phospholipid, avidin, and biotinylated antibody have been optimized to produce stable liposomes which are derivatized with up to 1.7 nmol of antibody/mumol of lipid. These derivatized liposomes are highly reactive to immunospecific aggregation in the presence of multivalent antigen. A linear increase in light scattering was recorded between 1 and 10 pmol of antigen. This work shows that liposomes containing biotinylated phospholipid can be a successful generic reagent for immunoassays.     

Biotin IgM Antibodies in Human Blood: A Previously Unknown Factor Eliciting False Results in Biotinylation-Based Immunoassays

Biotin is an essential vitamin that binds streptavidin or avidin with high affinity and specificity. As biotin is a small molecule that can be linked to proteins without affecting their biological activity, biotinylation is applied widely in biochemical assays. In our laboratory, IgM enzyme immuno assays (EIAs) of μ-capture format have been set up against many viruses, using as antigen biotinylated virus like particles (VLPs) detected by horseradish peroxidase-conjugated streptavidin. We recently encountered one serum sample reacting with the biotinylated VLP but not with the unbiotinylated one, suggesting in human sera the occurrence of biotin-reactive antibodies. In the present study, we search the general population (612 serum samples from adults and 678 from children) for IgM antibodies reactive with biotin and develop an indirect EIA for quantification of their levels and assessment of their seroprevalence. These IgM antibodies were present in 3% adults regardless of age, but were rarely found in children. The adverse effects of the biotin IgM on biotinylation-based immunoassays were assessed, including four inhouse and one commercial virus IgM EIAs, showing that biotin IgM do cause false positivities. The biotin can not bind IgM and streptavidin or avidin simultaneously, suggesting that these biotin-interactive compounds compete for the common binding site. In competitive inhibition assays, the affinities of biotin IgM antibodies ranged from 2.1×10(-3) to 1.7×10(-4 )mol/L. This is the first report on biotin antibodies found in humans, providing new information on biotinylation-based immunoassays as well as new insights into the biomedical effects of vitamins.     

Dehydration-rehydration vesicle methodology facilitates a novel approach to antibody binding to liposomes

Mouse monoclonal IgG1 specific for hepatitis B surface antigen and ovine polyclonal antibody raised against digoxin were covalently coupled by a diazotisation method to small unilamellar vesicles (SUV) composed of equimolar phospholipid and cholesterol supplemented with 6 mol% aminophenylstearylamine (APSA). Up to 33% of the antibody used was associated with vesicles, depending on the phospholipid and the antibody type used. Antibody-coated SUV were mixed with carboxyfluorescein (CF) or beta-galactosidase to generate multilamellar dehydration-rehydration vesicles (DRV) containing CF or active enzyme. In contrast, coupling of antibodies directly to beta-galactosidase-containing DRV resulted in total inactivation of the enzyme. About 85% of the SUV-bound antibody was recovered in DRV and of this, 78-82% was exposed on the liposomal surface, possibly because of reorientation of the APSA-antibody complex during DRV formation. Antibody-coated DRV remained stable in the presence of plasma at 37 degrees C and also under storage at 4 degrees C. Further, antibody coupled to such liposomes was capable of efficient interaction with the respective antigen. The present method allows the attachment of antibodies to the liposomal surface independently of entrapment of solutes, the activity of which is thus preserved, and could be adapted to alternative coupling procedures or ligands.     

Monoclonal antibody covalently coupled to liposomes: Specific targeting to cells

We have evaluated optimal conditions for coupling monoclonal antibody to small unilamellar lipisomes. Coupling of an IgG_2a monoclonal anti-β₂-microglobulin antibody, which reacts with human cells, was examined in detail. Liposomes were composed of dipalmitoyl lecithin and cholesterol, and variable quantities of phosphatidylethanolamine substituted with the heterobifunctional cross-linking reagent N-hydroxysuccinimidyl 3-(2-pyridyldithio) propionate (SPDP). They were reacted with antibody derivatized with the same reagent at a 5- to 20-fold molar excess, and activated by mild reduction. This degree of SPDP modification had no effect on the capacity of the antibody to bind to its target antigen. More than 40% of antibody could be reproducibly bound to liposomes, resulting in the coupling of from 1 to 10 antibody molecules per liposome (mean diameter.580 Å). The coupling reaction did not lead to loss of carboxyfluorescein encapsulated within liposomes. At least 80% of liposomes carried nondenatured antibody, as confirmed by precipitation of liposomes and encapsulated carboxyfluorescein by Staphylococcus aureus, strain Cowan I. The liposome-coupled antibody retained its immunological specificity: only cells expressing human β₂-microglobulin bound liposomes in vitro, and the binding was inhibited by the free antibody in solution. Results with antibodies of different antigenic specificity confirm that the technique can be generally applied.     

A monovalent streptavidin with a single femtomolar biotin binding site

Streptavidin and avidin are used ubiquitously because of the remarkable affinity of their biotin binding, but they are tetramers, which disrupts many of their applications. Making either protein monomeric reduces affinity by at least 10(4)-fold because part of the binding site comes from a neighboring subunit. Here we engineered a streptavidin tetramer with only one functional biotin binding subunit that retained the affinity, off rate and thermostability of wild-type streptavidin. In denaturant, we mixed a streptavidin variant containing three mutations that block biotin binding with wild-type streptavidin in a 3:1 ratio. Then we generated monovalent streptavidin by refolding and nickel-affinity purification. Similarly, we purified defined tetramers with two or three biotin binding subunits. Labeling of site-specifically biotinylated neuroligin-1 with monovalent streptavidin allowed stable neuroligin-1 tracking without cross-linking, whereas wild-type streptavidin aggregated neuroligin-1 and disrupted presynaptic contacts. Monovalent streptavidin should find general application in biomolecule labeling, single-particle tracking and nanotechnology.     

Development of a Streptavidin-Conjugated Single-Chain Antibody That Binds Bacillus cereus Spores

Control of microorganisms such as Bacillus cereus spores is critical to ensure the safety and a long shelf life of foods. A bifunctional single chain antibody has been developed for detection and binding of B. cereus T spores. The genes that encode B. cereus T spore single-chain antibody and streptavidin were connected for use in immunoassays and immobilization of the recombinant antibodies. A truncated streptavidin, which is smaller than but has biotin binding ability similar to that of streptavidin, was used as the affinity domain because of its high and specific affinity with biotin. The fusion protein gene was expressed in Escherichia coli BL21 (DE3) with the T7 RNA polymerase-T7 promoter expression system. Immunoblotting revealed an antigen specificity similar to that of its parent native monoclonal antibody. The single-chain antibody-streptavidin fusion protein can be used in an immunoassay of B. cereus spores by applying a biotinylated enzyme detection system. The recombinant antibodies were immobilized on biotinylated magnetic beads by taking advantage of the strong biotin-streptavidin affinity. Various liquids were artificially contaminated with 5 × 10⁴ B. cereus spores per ml. Greater than 90% of the B. cereus spores in phosphate buffer or 37% of the spores in whole milk were tightly bound and removed from the liquid phase by the immunomagnetic beads.     

Rapid detection and enumeration of Naegleria fowleri in surface waters by solid-phase cytometry

A new method for the rapid and accurate detection of pathogenic Naegleria fowleri amoebae in surface environmental water was developed. The method is based on an immunofluorescent assay combined with detection by solid-phase cytometry. In this study we developed and compared two protocols using different reporter systems conjugated to antibodies. The monoclonal antibody Ac5D12 was conjugated with biotin and horseradish peroxidase, and the presence of cells was revealed with streptavidin conjugated to both R-phycoerythrin and cyanine Cy5 (RPE-Cy5) and tyramide-fluorescein isothiocyanate, respectively. The RPE-Cy5 protocol was the most efficient protocol and allowed the detection of both trophozoite and cyst forms in water. The direct counts obtained by this new method were not significantly different from those obtained by the traditional culture approach, and results were provided within 3 h. The sensitivity of the quantitative method is 200 cells per liter. The limit is due only to the filtration capacity of the membrane used.     

Rapid Detection and Enumeration of Naegleria fowleri in Surface Waters by Solid-Phase Cytometry

A new method for the rapid and accurate detection of pathogenic Naegleria fowleri amoebae in surface environmental water was developed. The method is based on an immunofluorescent assay combined with detection by solid-phase cytometry. In this study we developed and compared two protocols using different reporter systems conjugated to antibodies. The monoclonal antibody Ac5D12 was conjugated with biotin and horseradish peroxidase, and the presence of cells was revealed with streptavidin conjugated to both R-phycoerythrin and cyanine Cy5 (RPE-Cy5) and tyramide-fluorescein isothiocyanate, respectively. The RPE-Cy5 protocol was the most efficient protocol and allowed the detection of both trophozoite and cyst forms in water. The direct counts obtained by this new method were not significantly different from those obtained by the traditional culture approach, and results were provided within 3 h. The sensitivity of the quantitative method is 200 cells per liter. The limit is due only to the filtration capacity of the membrane used.     

The use of biotinylated monoclonal antibodies and streptavidin affinity chromatography to isolate herpesvirus hydrophobic proteins or glycoproteins

A streptavidin/biotin-based immunoaffinity system was optimized to isolate herpesvirus (human cytomegalovirus) immediate early proteins or late glycoproteins from crude infected cell lysates. Biotinylation of the primary antibody by biotin substitution of epsilon amino groups was superior to biotin substitution of sugar residues. Biotinylation of the primary antibody was superior to that of a secondary antibody. A biotin substitution of approximately 8 M biotin/M antibody allowed for maximal recovery of viral antigens. The streptavidin/biotin-based immunoaffinity system can allow for relatively pure preparations of viral antigens that may be used for functional, immunological, or structural studies.