Insertion specificity and trans -activation of IS801

The transposable element IS801, isolated from plasmid pMMC7105 of Pseudomonas syringae pv. phaseolicola, transposes in Escherichia coli to plasmid targets, expressing a relatively relaxed target specificity. The target sequences are tetramers with homology with the left terminus (GAAC) of the transposing unit, the alternative targets being GAAC, GGAC, CAAG, and CGAC. In the areas flanking IS801 in 13 different locations, no similarities other than the target tetramer were observed. The transposase is physically and functionally separable from the transposing unit since transposition of constructs carrying marker genes occurs with the transposase expressed in trans. The IS801 transposase shows amino acid sequence homology to the transposases of the E. coli elements IS91 and IS1294. These tranposases contain conserved amino acid motifs found in the replicases of certain plasmids that replicate as rolling circles. Received: 18 March 1998 / Accepted: 15 August 1998     

Two Amino Acid Residues of Transposase Contributing to Differential Transposability of IS1 Elements in Escherichia coli

Escherichia coli W3110 contains four types of IS1 elements in the chromosome. Using an insertion element entrapping system, we collected 116 IS1 plasmid insertion mutants, which resulted from a minimum of 26 independent IS1 insertion events. All of them had insertions of IS1 of the IS1A (IS1E and IS1G) type. Inspection of the transposase sequences of the four IS1 types and the IS1 of the resistance plasmid R100 showed that two amino acid residues, His-193 and Leu-217 of transposase, might contribute to differential transposability of IS1 elements in W3110. The two amino acid residues of the transposase in IS1A (IS1E and IS1G) were altered separately by site-directed mutagenesis, and each mutant was found to mediate transposition at a frequency about 30-fold lower than that of IS1A (IS1E and IS1G). Thus, the assumption that His-193 and Leu-217 of transposase contribute to differential transposability of IS1 elements in W3110 was confirmed.     

Characterization of Insertions of IS476 and Two Newly Identified Insertion Sequences, IS1478 and IS1479, in Xanthomonas campestris pv. campestris

Thirty-two plasmid insertion mutants were independently isolated from two strains of Xanthomonas campestris pv. campestris in Taiwan. Of the 32 mutants, 14 (44%), 8 (25%), and 4 (12%) mutants resulted from separate insertions of an IS3 family member, IS476, and two new insertion sequences (IS), IS1478 and IS1479. While IS1478 does not have significant sequence homology with any IS elements in the EMBL/GenBank/DDBJ database, IS1479 demonstrated 73% sequence homology with IS1051 in X. campestris pv. dieffenbachiae, 62% homology with IS52 in Pseudomonas syringae pv. glycinea, and 60% homology with IS5 in Escherichia coli. Based on the predicted transposase sequences as well as the terminal nucleotide sequences, IS1478 by itself constitutes a new subfamily of the widespread IS5 family, whereas IS1479, along with IS1051, IS52, and IS5, belongs to the IS5 subfamily of the IS5 family. All but one of the IS476 insertions had duplications of 4 bp at the target sites without sequence preference and were randomly distributed. An IS476 insertion carried a duplication of 952 bp at the target site. A model for generating these long direct repeats is proposed. Insertions of IS1478 and IS1479, on the other hand, were not random, and IS1478 and IS1479 each showed conservation of PyPuNTTA and PyTAPu sequences (Py is a pyrimidine, Pu is a purine, and N is any nucleotide) for duplications at the target sites. The results of Southern blot hybridization analysis indicated that multiple copies of IS476, IS1478, and IS1479 are present in the genomes of all seven X. campestris pv. campestris strains tested and several X. campestris pathovars.     

Transposases are responsible for the target specificity of IS1397 and ISKpn1 for two different types of palindromic units (PUs)

Insertion sequences (IS)1397 and ISKpn1, found in Escherichia coli and Klebsiella pneumoniae, respectively, are IS3 family members that insert specifically into short palindromic repeated sequences (palindromic units or PUs). In this paper, we first show that although PUs are naturally absent from extrachromosomal elements, both ISs are able to transpose from the chromosome or from a plasmid into PUs artificially introduced into target plasmids. We also show that ISKpn1 target specificity is restricted to K.pneumoniae Z¹ PU type, whereas IS1397 target specificity is less stringent since the IS targets the three E.coli Y, Z¹ and Z² PU types indifferently. Experiments of transposition of both ISs driven by both transposases demonstrate that the inverted repeats flanking the ISs are not responsible for this target specificity, which is entirely due to the transposase itself. Implications on ISs evolution are presented.     

A Product of the Tn5 Transposase Gene Inhibits Transposition

The bacterial transposon Tn5 possesses a regulatory mechanism that allows it to move with higher efficiency when it is first introduced into a cell than after it is established. Tn5 is a composite transposable element containing inverted repeats of two nearly identical elements, IS 50R, which encodes the transposase protein necessary for Tn5 movement, and IS50L which contains an ochre mutant allele of the transposase gene. Data presented here show that Tn5 transposition is inhibited about 50-fold in cells of Escherichia coli which already carry IS 50R in the multicopy plasmid pBR322. If the cells contain a plasmid carrying either IS50L instead of IS50R, or derivatives of IS 50R in which the transposase gene has been mutated, little if any inhibition of Tn5 transposition is found. Although inhibition had previously been hypothesized to require interaction between the products of IS50 L and IS50R, our results show that IS50R alone is sufficient to mediate inhibition and suggest that the inhibitor is a product of the transposase gene itself.     

Characterization of IS1474, an insertion sequence of the IS21 family isolated from Pseudomonas alcaligenes NCIB 9867

A new insertion sequence (IS) designated IS1474 was isolated from Pseudomonas alcaligenes NCIB 9867 (P25X). IS1474 is a 2632 bp element which showed a characteristic IS structure with 12 bp inverted repeats (IRs) flanking a 2608 bp central region. IS1474 contained four open reading frames (ORF1–ORF4), two in each orientation. Similarities were detected between ORF1 and ORF2 and the putative transposases of the IS21 family. Sequences upstream from IS1474 were found to display up to 89% homology with IS53 from Pseudomonas syringae suggesting that IS1474 had inserted into another related IS element designated IS1475. An open reading frame, ORF5, located at the junction of IS1474 and IS1475, showed similarities with the IstB protein of IS21 and could possibly be the transposase subunit of IS1475. Transposition assays showed that IS1474 transposed at a relatively low frequency leading to cointegration with target plasmids. Hybridization studies showed that IS1474 is present in at least 13 copies in the chromosome of P25X and one copy on its endogenous plasmid.     

IS1-encoded proteins,InsA and the InsA-B′-InsB transframe protein (transposase): Functions deduced from their DNA-binding ability

Insertion sequence IS1 encodes a transframe protein, InsA-B′-InsB, which is produced from two out-of-phase reading frames, insA and B′-insB, by translational frameshifting at a run of adenines. Unless the frameshifting event occurs, the InsA protein is produced from IS1. We found that cells harboring a plasmid carrying an IS1 mutant with a single adenine insertion in the run of adenines contained miniplasmids. Cloning and DNA sequencing analyses of the miniplasmids revealed that they had a deletion extending from an inverted repeat (IR) at the left end of IS1. This indicates that they were generated by IS1-mediated deletion due to efficient production of the InsA-B′-InsB transframe protein that is IS1 transposase. Both the InsA protein and transposase were partially purified as a fusion protein with collagen-LacZ by LacZ-specific affinity column chromatography. The InsA¹ and the collagenolyzed InsA¹ were found to bind specifically to a 24-bp region within each of the IRs at the ends of IS1. The transposase Tnp¹ and the collagenolyzed Tnp¹ were found to bind to the sequence with or without IR, but preferentially to that with IR. The nonspecific DNA-binding ability of transposase may be involved in recognition of the target DNA, an important process of transposition of IS1. Both InsA and transposase have the IR-specific DNA binding ability and a common polypeptide segment containing the α-helix-turn-α-helix motif, supporting the previous indication that InsA competes with transposase to bind to IRs and thus becomes a transposition inhibitor. Based on the observations described in this article, we speculate that transposase of IS1 consists of at least two domains, the N-terminal half, which almost entirely overlaps InsA, and the C-terminal half, which almost entirely overlaps B′-InsB. The frameshifting event adds the latter domain to the former to give the transposase activity recognizing IRs and the target sequence to initiate the transposition reaction.     

Three insertion sequences from the cyanobacterium Synechocystis PCC6803 support the occurrence of horizontal DNA transfer among bacteria

Three insertion sequences were characterized from the widely-used cyanobacterium Synechocystis PCC6803. They all harbored a putative transposase sequence flanked by two imperfect inverted repeats, seemed to have duplicated their target insertion site and occurred as multiple copies in the host genome. They exhibited no obvious homology with any other cyanobacterial ISs and were termed IS5S (871 bp), IS4S (1299 bp) and ISS1987 (949 bp) because they were, respectively, homologous to IS5- and IS4-bacterial elements, and to several members of the IS630-Tc1-mariner superfamily of IS elements occurring in a wide range of hosts. This suggests that these IS-elements were spread through horizontal transfer between evolutionary distant organisms. Three IS5S-copies were isolated as a rescue insertion into a replicating plasmid (IS5Sa), or subsequently cloned from a Synechocystis DNA-library probed with IS5Sa (IS5Sb and IS5Sc), and appeared to be almost identical. In the vicinity of IS5Sb, we found the ISS1987 element inserted into the IS4S element. This indicates that the ISS1987 element has been, and could still be, mobile since its transposase sequence is not interrupted with stop codons or translational frameshifts, unlike that which is found in most members of the IS630-Tc1-mariner superfamily of transposable elements.     

Formation of the tandem repeat (IS30)2 and its role in IS30-mediated transpositional DNA rearrangements

Plasmids carrying two IS30 elements in the same orientation, as in the composite transposon Tn2706, are structurally unstable in Escherichia coli. A primary segregation product is formed by site-specific deletion of the sequences carried between the two IS30 elements. The resulting covalently closed replicon carries the two IS30 elements as tandem repeats separated by only 2 bp. This (IS30)₂ structure is extremely unstable, but it can nevertheless be isolated on its vector plasmid and, after purification, can be reintroduced into host cells by transformation. Among the descendants of transformants of recA ^? bacteria, replicated copies of the introduced (IS30)₂ structure are still present, together with various kinds of segregation products which provide evidence for the efficient generation of DNA rearrangements. Most abundant is the product of another site-specific recombination between two identical ends of the IS30 elements involved, which results in the presence of just one intact IS30 on the plasmid. Apart from this, and depending on the presence of appropriate targets for IS30 transposition, various transposition products of (IS30)₂ are also seen. Intramolecular reactions lead to DNA inversions and deletions with breakpoints other than IS30 ends. In intermolecular reactions inverse transposition occurs at high frequency and one also obtains simple transposition and cointegration. A mutational study revealed the requirement in cis of one intact IS30 transposase gene and of both proximal ends of the two IS30 elements concerned not only for the formation of (IS30)₂, but also for its further rearrangement reactions, including the efficient formation of site-specific deletions. A model is proposed, which postulates that (IS30)₂ intermediates play a key role in IS30 transposition pathways in which the formation of (IS30)₂ may be rate-limiting. Once this structure is formed, it gives rise to a burst of transpositional rearrangements in the subclone carrying (IS30)₂. Evolutionary implications of these findings are discussed.     

Cointegration and resolution mediated by IS101 present in plasmid pSC101

Summary A certain class of cointegrate plasmids was found to occur between a pSC101 derivative and a second plasmid pBV320 in E. coli F^- cells. Cleavage analysis and DNA sequencing showed that the cointegrate plasmid contained direct repeats of an insertion sequence IS101 at the recombination junctions, indicating that formation of cointegrates was mediated by IS101, which is a natural constitutent of pSC101. These cointegrates were formed only in cells which contained the transposon gamma-delta, suggesting that the gamma-delta sequence, which provides transposase, is responsible for cointegration. Whenever the cointegrate plasmids were present in cells containing gamma-delta or its related transposon Tn3, the cointegrates were dissolved to give pBV320::IS101 due to recombination at duplicated IS101 sequences in the cointegrates, suggesting that both gamma-delta and Tn3, which provide a resolvase, are responsible for the resolution of the cointegrates. Comparison between the nucleotide sequence of IS101 and those of gamma-delta and Tn3 shows a high degree of homology in the regions that have been shown to be the binding sites of resolvases, as well as in the terminal inverted repeats. However, there is no homology between IS101 and the other element, gamma-delta or Tn3, in the internal resolution site, at which the resolution event may occur.Abbreviations Tc tetracycline - Cm chloramphenicol - Ap ampicillin - bp base pairs - kb kilobase pairs     

A cis-encoded sRNA,Hfq and mRNA secondary structure act independently to suppress IS200 transposition

IS200 is found throughout Enterobacteriaceae and transposes at a notoriously low frequency. In addition to the transposase protein (TnpA), IS200 encodes an uncharacterized Hfq-binding sRNA that is encoded opposite to the tnpA 5''UTR. In the current work we asked if this sRNA represses tnpA expression. We show here that the IS200 sRNA (named art200 for antisense regulator of transposase IS200) basepairs with tnpA to inhibit translation initiation. Unexpectedly, art200-tnpA pairing is limited to 40 bp, despite 90 nt of perfect complementarity. Additionally, we show that Hfq and RNA secondary structure in the tnpA 5''UTR each repress tnpA expression in an art200-independent manner. Finally, we show that disrupting translational control of tnpA expression leads to increased IS200 transposition in E. coli. The current work provides new mechanistic insight into why IS200 transposition is so strongly suppressed. The possibility of art200 acting in trans to regulate a yet-unidentified target is discussed as well as potential applications of the IS200 system for designing novel riboregulators.     

Characterization of the Transposase Encoded by IS256, the Prototype of a Major Family of Bacterial Insertion Sequence Elements

IS256 is the founding member of the IS256 family of insertion sequence (IS) elements. These elements encode a poorly characterized transposase, which features a conserved DDE catalytic motif and produces circular IS intermediates. Here, we characterized the IS256 transposase as a DNA-binding protein and obtained insight into the subdomain organization and functional properties of this prototype enzyme of IS256 family transposases. Recombinant forms of the transposase were shown to bind specifically to inverted repeats present in the IS256 noncoding regions. A DNA-binding domain was identified in the N-terminal part of the transposase, and a mutagenesis study targeting conserved amino acid residues in this region revealed a putative helix-turn-helix structure as a key element involved in DNA binding. Furthermore, we obtained evidence to suggest that the terminal nucleotides of IS256 are critically involved in IS circularization. Although small deletions at both ends reduced the formation of IS circles, changes at the left-hand IS256 terminus proved to be significantly more detrimental to circle production. Taken together, the data lead us to suggest that the IS256 transposase-mediated circularization reaction preferentially starts with a sequence-specific first-strand cleavage at the left-hand IS terminus.IS256 is an insertion sequence widespread in the genomes of multiresistant enterococci and staphylococci (3). The element, which is 1,324 bp in size, consists of a single open reading frame encoding a transposase protein flanked by noncoding regions (NCRs) harboring imperfect inverted repeats (IRs) (see Fig. ​Fig.1A).1A). IS256 occurs in multiple free copies in its host genomes but is also known to form the ends of composite transposon Tn4001 conferring aminoglycoside resistance (29). In Staphylococcus epidermidis, IS256 has been identified as a typical marker of hospital-acquired multiresistant and biofilm-forming clones causing opportunistic infections in immunocompromised patients (11, 20-22, 26, 34). The element has been shown to trigger heterogeneous biofilm expression by reversible transposition into biofilm-associated genes and regulators (4, 5, 19, 49, 56). Also, IS256 has the capacity to influence antibiotic resistance, either by insertion into regulatory genes or by modulating antibiotic resistance gene expression through formation of strong hybrid promoters resulting from transposition into the neighborhood of antibiotic resistance genes (6, 18, 31, 32). Finally, multiple genomic IS256 copies may serve as crossover points for homologous recombination events and thereby play an important role in genome flexibility, adaptation, and evolution of staphylococcal and enterococcal genomes (29, 42, 55).Open in a separate windowFIG. 1.IS256 transposase binding to IS termini. (A) Genetic organization of IS256. The transposase gene (tnp) is flanked by NCRs that harbor imperfect IRs (IR_L and IR_R) at the ends of the element. The nucleotide sequence of the IRs is indicated by uppercase boldface letters, with nucleotide numbering referring to GenBank accession no. {"type":"entrez-nucleotide","attrs":{"text":"M18086","term_id":"152946","term_text":"M18086"}}M18086. Insertion of IS256 into the S. epidermidis icaC gene on plasmid pIL2 (27) is shown, and black boxes mark the 8-bp target site duplications (TSDs) generated upon transposition of the element. Black bars at the top indicate localizations of DNA fragments used in the EMSAs presented in panels B to D. (B to D) EMSAs of purified IS256 transposase protein (CBP-Tnp) with various IS256-specific DNA fragments. A 15.5 nM concentration of an IS terminus (left)-carrying DNA fragment (B) or an IS terminus (right)-carrying DNA-fragment (C), as well as an interal IS256 fragment (D), were used with increasing amounts of protein. All experiments were performed in the presence of unspecific competitor [50 μg of poly(dI-dC) ml⁻¹]. Molar ratios between DNA and protein comprised a range of 1:3 (50 nM CBP-Tnp) to 1:52 (800 nM CBP-Tnp).Given its important biological role, it is surprising that very little is known about the molecular function of IS256 and its lifestyle. Empirical analyses of IS256 insertion sites in various bacterial genomes and loci did not reveal nucleotide sequence specificity for target site selection (3, 29, 56). Typically, IS256 generates 8- or 9-bp target site duplications (TSDs) upon transposition that are caused by staggered nicks of the target DNA and refill of the resulting gaps by the host repair system (43). In the course of phase variation events, IS256 TSDs can be completely removed, with the original host sequence being restored (56). Such precise IS256 excisions are caused by an illegitimate recombination event that requires fully intact TSDs but no functional IS256 transposase (14). IS256 transposition itself was found to involve the formation of double-stranded circular IS256 molecules in which the insertion sequence (IS) ends abut, bridged by a few base pairs of host DNA originating from the original insertion site (27, 39). IS256 circle formation is a strictly transposase-dependent process and IS circles are regarded as transposition intermediates which are likely to be relinearized during transposition. However, details of the transposition reaction, including circle formation, putative relinearization, target site selection, and insertion of the element are far from being understood at the molecular level. We experimentally addressed here, for the first time for a bacterial transposase of the IS256 family, the DNA-binding properties of this protein. We identified a DNA-binding domain in the N-terminal region of the protein. The domain contains a putative classical helix-turn-helix (HTH) motif that is demonstrated to be involved in sequence-specific interactions of the IS256 transposase with the IRs present in the NCRs of the element. Moreover, we suggest a role for the terminal nucleotides of the IS256 nucleotide sequence in first-strand cleavage and subsequent circularization of the element.     

The araC gene of Citrobacter freundii

The araC gene of Citrobacter freundii was cloned into plasmid pBR322 and expressed in Escherichia coli and Salmonella typhimurium. The nucleotide sequence and the predicted translational product were determined and compared to those of E. coli, S. typhimurium and Erwinia carotovora. The predicted translational product is 281 amino acids (aa) long, identical in size to that of S. typhimurium, and is 11 and 29 aa shorter than that of E. coli and E. carotovora, respectively. The nucleotide sequence of the araC gene of C. freundii is 83% homologous to the araC genes of both E. coli and S. typhimurium, but only 60% homologous to that of E. carotovora with respect to the regions they share. The predicted amino acid sequence is highly conserved and shows 96% and 94% homology to S. typhimurium and E. coli, respectively. E. carotovora shows only a 58% aa homology. The activator and autoregulatory activities of each plasmid encoded AraC protein in a S. typhimurium araC::lacZ protein fusion strain were examined.     

DNA sequence of IS91 and identification of the transposase gene.

IS91 is a 1,830-bp insertion sequence that inserts specifically at the sequence CAAG or GAAC of the target and does not duplicate any sequence upon insertion (23). By transposon mutagenesis, we have identified open reading frame 426 (ORF426; bp 454 to 1731) as the putative ORF for the transposase. It displays a cysteine-rich, potential metal-binding domain in its N-terminal region. Adjacent to ORF426, there is an ORF (ORF121) which precedes and terminally overlaps ORF426 by one amino acid. Tn1732 insertions in ORF121 do not affect the transposition frequency. IS91 has sequence similarities to IS801 from Pseudomonas syringae. Their putative transposases are 36% identical, including conservation of the cysteine-rich cluster. The information concerning IS801 insertion specificity and target duplication has been reevaluated in the light of our results.     

Efficient transposition of IS204-derived plasmids in Streptomyces coelicolor

In order to study functional gene expression in Streptomyces coelicolor, a mini-transposon encoding the apramycin resistance gene aac(3)IV within its inverted repeat (IR) boundaries was constructed based on IS204, which was previously identified in the genome of Nocardia asteroides YP21. The mini-transposon and IS204 transposase gene were then put on a kanamycin-resistant conjugative plasmid pDZY101 that can only replicate in Escherichia coli. After mating with S. coelicolor A3(2) M145, resistant colonies arose efficiently on both apramycin and kanamycin plates. Plasmid rescue indicated that entire plasmids were inserted into the M145 genome with cleavage at an inverted repeat junction formed by the right inverted repeat (IRR) and the last 18 bp of the transposase gene, while the left inverted repeat (IRL) was untouched. Southern blot analysis of the mutants using an aac(3)IV gene probe showed that transposition of plasmid pDZY101 was genetically stable, with a single-copy insertion within the S. coelicolor M145 genome. Several mutagenesis libraries of S. coelicolor M145 were constructed using plasmid pDZY101 derivatives and the transposon insertion site was determined. The correlation between novel mutant phenotypes and previously uncharacterized genes was established and these transposon locations were widely scattered around the genome.     

IS1549 from Mycobacterium smegmatis Forms Long Direct Repeats upon Insertion

A new insertion element, IS1549, was identified serendipitously from Mycobacterium smegmatis LR222 during experiments using a vector designed to detect the excision of IS6110 from between the promoter region and open reading frame (ORF) of an aminoglycoside phosphotransferase gene. Six of the kanamycin-resistant isolates had a previously unidentified insertion element upstream of the ORF of the aph gene. The 1,634-bp sequence contained a single ORF of 504 amino acids with 85% G+C content in the third codon position. The putative protein sequence showed a distant relationship to the transposase of IS231, which is a member of the IS4 family of insertion elements. IS1549 contains 11-bp terminal inverted repeats and is characterized by the formation of unusually long and variable-length (71- to 246-bp) direct repeats of the target DNA during transposition. Southern blot analysis revealed that five copies of IS1549 are present in LR222, but not all M. smegmatis strains carry this element. Only strains with a 65-kDa antigen gene with a PCR-restriction fragment length polymorphism type identical to that of M. smegmatis 607 contain IS1549. None of 13 other species of Mycobacterium tested by PCR with two sets of primers specific for IS1549 were positive for the expected amplified product.     

Analysis of the Complete Nucleotide Sequence of the Tetracycline-Resistance Transposon Tn10

An analysis of the complete nucleotide sequence of the composite tetracycline-resistance transposon Tn10 (9147 bp) from the Salmonella typhi conjugative plasmid R27 is presented. A comparison of the protein sequences from IS10-right and IS10-left transposases has identified four amino acid differences. These residues appear to play an important role in normal transposase function and may account for the differences in exhibited transposition activities. The tetracycline determinants encoded by this version of Tn10 share >99% identity with those of Tn10^R100, demonstrating the conservation that exists between these transposons. A previously uncharacterized 3000-bp region of Tn10 contains four putative open reading frames. One of these open reading frames shares 55% identity with the glutamate permease protein sequence from Haemophilus influenzae although it was unable to complement an Escherichia coli glutamate permease mutant, with which it shares 51% identity. The three remaining putative open reading frames are arranged as a discrete genetic unit adjacent to the glutamate permease homolog and are transcribed in the opposite direction. Two of these open reading frames are homologous with Bacillus subtilis proteins of unknown functions while the other has no homologs in the database. The presence of an aminoacyl-tRNA synthetase class II motif in one of these open reading frames in combination with the glutamate permease homolog allows us to postulate that this region of Tn10 could once have played a role in amino acid metabolism.     

Mobility and Generation of Mosaic Non-Autonomous Transposons by Tn3-Derived Inverted-Repeat Miniature Elements (TIMEs)

Functional transposable elements (TEs) of several Pseudomonas spp. strains isolated from black shale ore of Lubin mine and from post-flotation tailings of Zelazny Most in Poland, were identified using a positive selection trap plasmid strategy. This approach led to the capture and characterization of (i) 13 insertion sequences from 5 IS families (IS3, IS5, ISL3, IS30 and IS1380), (ii) isoforms of two Tn3-family transposons – Tn5563a and Tn4662a (the latter contains a toxin-antitoxin system), as well as (iii) non-autonomous TEs of diverse structure, ranging in size from 262 to 3892 bp. The non-autonomous elements transposed into AT-rich DNA regions and generated 5- or 6-bp sequence duplications at the target site of transposition. Although these TEs lack a transposase gene, they contain homologous 38-bp-long terminal inverted repeat sequences (IRs), highly conserved in Tn5563a and many other Tn3-family transposons. The simplest elements of this type, designated TIMEs (Tn3 family-derived Inverted-repeat Miniature Elements) (262 bp), were identified within two natural plasmids (pZM1P1 and pLM8P2) of Pseudomonas spp. It was demonstrated that TIMEs are able to mobilize segments of plasmid DNA for transposition, which results in the generation of more complex non-autonomous elements, resembling IS-driven composite transposons in structure. Such transposon-like elements may contain different functional genetic modules in their core regions, including plasmid replication systems. Another non-autonomous element “captured” with a trap plasmid was a TIME derivative containing a predicted resolvase gene and a res site typical for many Tn3-family transposons. The identification of a portable site-specific recombination system is another intriguing example confirming the important role of non-autonomous TEs of the TIME family in shuffling genetic information in bacterial genomes. Transposition of such mosaic elements may have a significant impact on diversity and evolution, not only of transposons and plasmids, but also of other types of mobile genetic elements.     

The insertion sequence IS21 of R68.45 and the molecular basis for mobilization of the bacterial chromosome

The IncP-1 plasmid mutant R68.45, which is able to mobilize the chromosomes of many Gram-negative bacteria, was shown to carry a 2.10-kb insertion sequence designated IS21. This sequence transposed to the small multicopy plasmid pED815 at a high frequency (2 × 10^?3) and in two pED815::IS21 derivatives inactivated the tetracycline-resistance and replication functions, respectively. We propose that the chromosome-mobilizing ability of R68.45 is due to the formation of an R68.45-chromosome cointegrate during transposition of IS21. This would account for its high efficiency and the absence of a fixed chromosomal origin of transfer in Pseudomonas aeruginosa PAO, and its ability to function in a variety of bacterial hosts. R68.45 is formed from R68 by duplication of a 2.1-kb DNA segment including a distinctive cluster of seven restriction endonuclease sites. The two copies of the duplicated segment are probably contiguous and so might have arisen by a transition type of mechanism. IS21 is similar in length to the duplicated segment and includes the same set of seven cleavage sites located at similar distances from the two termini. However, the single copy of the duplicated segment in R68 transposed at an undetectably low frequency (<6 × 10^?8); either the duplicated segment and IS21, although overlapping, are not identical, or they are identical but the transposition system is nonfunctional in R68. Our further investigations of R68.45 and of several independently isolated chromosome-mobilizing derivatives of R68 demonstrated that these were indistinguishable from each other and that they did not include any P. aeruginosa PAO DNA. Furthermore, we searched without success for sequences corresponding to IS21, and to the Escherichia coli K-12 insertion sequences IS1, IS2, and IS3, on the chromosomes of P. aeruginosa PAO and PAT and P. putida PPN, and on several Pseudomonas plasmids. The contribution of homology to low-frequency chromosomal mobilization by these plasmids is discussed.     

Complete sequencing of pNDM-HK encoding NDM-1 carbapenemase from a multidrug-resistant Escherichia coli strain isolated in Hong Kong

Background

The emergence of plasmid-mediated carbapenemases, such as NDM-1 in Enterobacteriaceae is a major public health issue. Since they mediate resistance to virtually all β-lactam antibiotics and there is often co-resistance to other antibiotic classes, the therapeutic options for infections caused by these organisms are very limited.

Methodology

We characterized the first NDM-1 producing E. coli isolate recovered in Hong Kong. The plasmid encoding the metallo-β-lactamase gene was sequenced.

Principal Findings

The plasmid, pNDM-HK readily transferred to E. coli J53 at high frequencies. It belongs to the broad host range IncL/M incompatibility group and is 88803 bp in size. Sequence alignment showed that pNDM-HK has a 55 kb backbone which shared 97% homology with pEL60 originating from the plant pathogen, Erwina amylovora in Lebanon and a 28.9 kb variable region. The plasmid backbone includes the mucAB genes mediating ultraviolet light resistance. The 28.9 kb region has a composite transposon-like structure which includes intact or truncated genes associated with resistance to β-lactams (bla _TEM-1, bla _NDM-1, Δbla _DHA-1), aminoglycosides (aacC2, armA), sulphonamides (sul1) and macrolides (mel, mph2). It also harbors the following mobile elements: IS26, ISCR1, tnpU, tnpAcp2, tnpD, ΔtnpATn1 and insL. Certain blocks within the 28.9 kb variable region had homology with the corresponding sequences in the widely disseminated plasmids, pCTX-M3, pMUR050 and pKP048 originating from bacteria in Poland in 1996, in Spain in 2002 and in China in 2006, respectively.

Significance

The genetic support of NDM-1 gene suggests that it has evolved through complex pathways. The association with broad host range plasmid and multiple mobile genetic elements explain its observed horizontal mobility in multiple bacterial taxa.