Use of response surface methodology for optimizing process parameters for high inulinase production by the marine yeast <Emphasis Type="Italic">Cryptococcus aureus</Emphasis> G7a in solid-state fermentation and hydrolysis of inulin

The optimization of process parameters for high inulinase production by the marine yeast strain Cryptococcus aureus G7a in solid-state fermentation (SSF) was carried out using central composite design (CCD), one of the response surface methodologies (RSMs). We found that moisture, inoculation size, the amount ratio of wheat bran to rice husk, temperature and pH had great influence on inulinase production by strain G7a. Therefore, the CCD was used to evaluate the influence of the five factors on the inulinase production by strain G7a. Then, five levels of the five factors above were further optimized using the CCD. Finally, the optimal parameters obtained with the RSM were the initial moisture 61.5%, inoculum 2.75%, the amount ratio of wheat bran to rice husk 0.42, temperature 29 °C, pH 5.5. Under the optimized conditions, 420.9 U g⁻¹ of dry substrate of inulinase activity was reached in the solid-state fermentation culture of strain G7a within 120 h whereas the predicted maximum inulinase activity of 436.2 U g⁻¹ of inulinase activity of 436.2 U g⁻¹ of dry weight was derived from the RSM regression. This is the highest inulinase activity produced by the yeast strain reported so far. A large amount of monosaccharides and oligosaccharides were detected after inulin hydrolysis by the crude inulinase.     

Production of cephamycin C by <Emphasis Type="Italic">Streptomyces clavuligerus</Emphasis> NT4 using solid-state fermentation

Cephamycin C is an extracellular broad spectrum β-lactam antibiotic produced by Streptomyces clavuligerus, S. cattleya and Nocardia lactamdurans. In the present study, different substrates for solid-state fermentation were screened for maximum cephamycin C production by S. clavuligerus NT4. The fermentation parameters such as substrate concentration, moisture content, potassium dihydrogen phosphate, inoculum size and ammonium oxalate were optimized by response surface methodology (RSM). The optimized conditions yielded 21.68 ± 0.76 mg gds⁻¹ of cephamycin C as compared to 10.50 ± 1.04 mg gds⁻¹ before optimization. Effect of various amino acids on cephamycin C production was further studied by using RSM, which resulted in increased yield of 27.41 ± 0.65 mg gds⁻¹.     

Production of inulinase by solid-state fermentation: effect of process parameters on production and preliminary characterization of enzyme preparations

This work was aimed at producing inulinase by solid-state fermentation of sugarcane bagasse, using factorial design to identify the effect of corn steep liquor (CSL) and soybean bran concentration, particle size of bagasse and size of inoculum. Maximum inulinase activity achieved was 250 U per g of dry substrate (gds) at 20% (w/w) of CSL, 5% (w/w) of soybean bran, 1 × 10¹⁰ cells mL⁻¹ and particle size of bagasse in the range 9/32 mesh. The use of soybean bran decreased the time to reach maximum activity from 96 to 24 h and the maximum productivity achieved was 8.87 U gds⁻¹ h⁻¹. The maximum activity was obtained at pH 5.0 and 55.0°C. Within the investigated range, the enzyme extract was more thermostable at 50.0°C, showing a D-value of 123.1 h and deactivation energy of 343.9 kJ gmol⁻¹. The extract showed highest stability from pH 4.5 to 4.8. Apparent K _m and V _max are 7.1 mM and 17.79 M min⁻¹, respectively.     

Enhanced production of poly (γ-glutamic acid) from <Emphasis Type="Italic">Bacillus licheniformis</Emphasis> NCIM 2324 in solid state fermentation

This work reports on the optimization of PGA production by Bacillus licheniformis NCIM 2324 in solid state fermentation (SSF). In the first step, the one factor-at-a-time method was used to investigate the effect of solid substrates, initial moisture content, pH, and additional carbon and nitrogen source on PGA production; subsequently, response surface methodology (RSM) was used to establish the optimum concentrations of the key nutrients for higher PGA production. In the second step, the effects of amino acids and TCA cycle intermediates on the production of PGA were studied. The final optimized medium gave a maximum yield of 98.64 ± 1.61 mg gds⁻¹ of PGA, which is significantly higher than that reported in the literature.     

Cellulase production from agricultural residues by recombinant fusant strain of a fungal endophyte of the marine sponge Latrunculia corticata for production of ethanol

Several fungal endophytes of the Egyptian marine sponge Latrunculia corticata were isolated, including strains Trichoderma sp. Merv6, Penicillium sp. Merv2 and Aspergillus sp. Merv70. These fungi exhibited high cellulase activity using different lignocellulosic substrates in solid state fermentations (SSF). By applying mutagenesis and intergeneric protoplast fusion, we have obtained a recombinant strain (Tahrir-25) that overproduced cellulases (exo-β-1,4-glucanase, endo-β-1,4-glucanase and β-1,4-glucosidase) that facilitated complete cellulolysis of agricultural residues. The process parameters for cellulase production by strain Tahrir-25 were optimized in SSF. The highest cellulase recovery from fermentation slurries was achieved with 0.2% Tween 80 as leaching agent. Enzyme production was optimized under the following conditions: initial moisture content of 60% (v/w), inoculum size of 10⁶ spores ml⁻¹, average substrate particle size of 1.0 mm, mixture of sugarcane bagasse and corncob (2:1) as the carbon source supplemented with carboxymethyl cellulose (CMC) and corn steep solids, fermentation time of 7 days, medium pH of 5.5 at 30°C. These optimized conditions yielded 450, 191, and 225 units/gram dry substrate (U gds⁻¹) of carboxylmethyl cellulase, filter-paperase (FPase), and β-glucosidase, respectively. Subsequent fermentation by the yeast, Saccharomyces cerevisiae NRC2, using lignocellulose hydrolysates obtained from the optimized cellulase process produced the highest amount of ethanol (58 g l⁻¹). This study has revealed the potential of exploiting marine fungi for cost-effective production of cellulases for second generation bioethanol processes.     

Production and optimization of thermophilic alkaline protease in solid-state fermentation by <Emphasis Type="Italic">Streptomyces</Emphasis> sp. CN902

The purpose of the present research is to study the production of thermophilic alkaline protease by a local isolate, Streptomyces sp. CN902, under solid state fermentation (SSF). Optimum SSF parameters for enzyme production have been determined. Various locally available agro-industrial residues have been screened individually or as mixtures for alkaline protease production in SSF. The combination of wheat bran (WB) with chopped date stones (CDS) (5:5) proved to be an efficient mixture for protease production as it gave the highest enzyme activity (90.50 U g⁻¹) when compared to individual WB (74.50 U g⁻¹) or CDS (69.50 U g⁻¹) substrates. This mixed solid substrate was used for the production of protease from Streptomyces sp. CN902 under SSF. Maximal protease production (220.50 U g⁻¹) was obtained with an initial moisture content of 60%, an inoculum level of 1 × 10⁸ (spore g⁻¹ substrate) when incubated at 45°C for 5 days. Supplementation of WB and CDS mixtures with yeast extract as a nitrogen source further increased protease production to 245.50 U g⁻¹ under SSF. Our data demonstrated the usefulness of solid-state fermentation in the production of alkaline protease using WB and CDS mixtures as substrate. Moreover, this approach offered significant benefits due to abundant agro-industrial substrate availability and cheaper cost.     

Exoglucanase production by Aspergillus niger grown on wheat bran

β-Exoglucanase production on the lignocellulosic material, wheat bran, by Aspergillus niger under solid state fermentation (SSF) on a laboratory scale was investigated. Different fermentation parameters, such as moisture content, initial pH, temperature, depth of the substrate, and inoculum size on exoglucanase production were optimized. Moisture content of 40 %, pH of 7.0, substrate depth of 1.0 cm, inoculum size of 2?×?10⁶ spores/g of wheat bran, and temperature at 30 °C were optimal for maximum production of exoglucanase. Maximum yields of exoglucanase with 28.60 FPU/g of wheat bran were obtained within 3 days of incubation under optimal conditions.     

Optimization of xylanase production using inexpensive agro-residues by alkalophilic Bacillus subtilis ASH in solid-state fermentation

Alkalophilic Bacillus subtilis ASH produced high levels of xylanase using easily available inexpensive agricultural waste residues such as wheat bran, wheat straw, rice husk, sawdust, gram bran, groundnut and maize bran in solid-state fermentation (SSF). Among these, wheat bran was found to be best substrate. Xylanase production was highest after 72 h of incubation at 37 °C and at a substrate to moisture ratio of 1:2 (w/v). The inoculum level of 15% resulted in maximum production of xylanase. The enzyme production was stimulated by the addition of nutrients such as yeast extract, peptone and beef extract. In contrast, addition of glucose and xylose repressed the production of xylanase. The extent of repression by glucose (10%, w/v) was 81% and it was concentration-dependent. Supplementation of the medium with 4% xylose caused 59% repression. Under optimized conditions, xylanase production in SSF (8,964 U of xylanase/g dry wheat bran) was about twofold greater than in submerged fermentation. Thus, B. subtilis produced a very high level of xylanase in SSF using inexpensive agro-residues, a level which is much higher than that reported by any other bacterial isolate. Furthermore, the enzyme was produced at room temperature and with tap water without the addition of any mineral salt in SSF, leading to a marked decrease in the cost of xylanase production, which enhances its industrial potential.     

Enzymatic production of N-acetyl-D-glucosamine by solid state fermentation of chitinase by Penicillium ochrochloron MTCC 517 using agricultural residues

The optimization studies for production of chitinase were carried out by response surface methodology (RSM) based on statistics experimental design using three substrates, which were wheat, rice and red gram bran. 2⁴ full factorial central composite design was applied to evaluate optimal combinations of variables. These variables were chitin concentration, initial moisture content, inoculum level, and incubation time. The results of second order polynomial showed that all four variables had significant effect on chitinase production. Maximum chitinase activity was recorded for wheat bran (2443.23 U g⁻¹) than rice (1216.65 U g⁻¹) and red gram bran (961.32 U g⁻¹). An overall 3-fold increase in chitinase activity was achieved using optimized strategies of RSM. Growth of the fungus on all bran particles have been visualized by scanning electron microscopy. These results indicated the potential of Penicillium ochrochloron for economical production of chitinase using agricultural residues. TLC and HPLC analysis of colloidal chitin hydrolysate with partially purified chitinases revealed that the major reaction product was monomeric GlcNAc indicating the potential of these enzymes for efficient production of GlcNAc.     

Enhanced production of an alkaline pectinase from Streptomyces sp. RCK-SC by whole-cell immobilization and solid-state cultivation

An alkalophilic Streptomyces sp. RCK-SC, which produced a thermostable alkaline pectinase, was isolated from soil samples. Pectinase production at 45 °C in shaking conditions (200 rev min⁻¹) was optimal (76,000 IU l⁻¹) when a combination of glucose (0.25% w/v) and citrus pectin (0.25% w/v) was added along with urea (0.25% w/v) in the basal medium devoid of yeast extract and peptone. All the tested amino acids and vitamins greatly induced pectinase production and increased the specific productivity of pectinase up to 550%. In an immobilized cell system containing polyurethane foam (PUF), the pectinase production was enhanced by 32% (101,000 IU l⁻¹) compared to shake flask cultures. In solid-state cultivation (SSC) conditions, using wheat bran as solid substrate, pectinase yield of 4857 IU g⁻¹ dry substrate was obtained at substrate-to-moisture ratio of 1:5 after 72 h of incubation. The partially purified pectinase was optimally active at 60 °C and retained 80% of its activity at 50 °C after 2 h of incubation. The half life of pectinase was 3 h at 70 °C. Pectinase was stable at alkaline pH ranging from 6.0 to 9.0 for more than 8 h at room temperature retaining more than 50% of its activity. This revised version was published online in August 2006 with corrections to the Cover Date.     

Statistical optimization of alkaline xylanase production from <Emphasis Type="Italic">Streptomyces violaceoruber</Emphasis> under submerged fermentation using response surface methodology

Response surface methodology employing central composite design (CCD) was used to optimize fermentation medium for the production of cellulase-free, alkaline xylanase from Streptomyces violaceoruber under submerged fermentation. The design was employed by selecting wheat bran, peptone, beef extract, incubation time and agitation as model factors. A second-order quadratic model and response surface method showed that the optimum conditions for xylanase production (wheat bran 3.5 % (w/v), peptone 0.8 % (w/v), beef extract 0.8 % (w/v), incubation time 36 h and agitation 250 rpm) results in 3.0-fold improvement in alkaline xylanase production (1500.0 IUml⁻¹) as compared to initial level (500.0 IUml⁻¹) after 36 h of fermentation, whereas its value predicted by the quadratic model was 1347 IUml⁻¹. Analysis of variance (ANOVA) showed a high coefficient of determination (R²) value of 0.9718, ensuring a satisfactory adjustment of the quadratic model with the experimental data. The economical and cellulase-free nature of xylanase would enhance its applicability in pulp and paper industry.     

Enrichment of laccase production by Phoma herbarum isolate KU4 under solid-state fermentation by optimizing RSM coefficients using genetic algorithm

The process parameters were optimized to obtain enhanced enzyme activity from the fungus Phoma herbarum isolate KU4 using rice straw and saw dust as substrate under solid-state fermentation using Response surface methodology (RSM). Genetic algorithm was used to validate the RSM for maximum laccase production. Six variables, viz., pH of the media, initial moisture content, copper sulphate concentration, concentration of tannic acid, inoculum concentration and incubation time were found to be effective and optimized for enhanced production. Maximum laccase production was achieved by RSM at pH 5·0 and 86% of initial moisture content of the culture medium, 150 µmol l⁻¹ of CuSO₄, 1·5% tannic acid and 0·128 g inoculum g⁻¹ dry substrate inoculum size on the fourth day of fermentation. The highest laccase activity was observed as 79 008 U g⁻¹, which is approximately sixfold enhanced production compared to the unoptimized condition (12 085·26 U g⁻¹).     

Production of xylanase under solid-state fermentation by <Emphasis Type="Italic">Aspergillus tubingensis</Emphasis> JP-1 and its application

The production of extracellular xylanase by a locally isolated strain of Aspergillus tubingensis JP-1 was studied under solid-state fermentation. Among the various agro residues used wheat straw was found to be the best for high yield of xylanase with poor cellulase production. The influence of various parameters such as initial pH, moisture, moistening agents, nitrogen sources, additives, surfactants and pretreatment of substrates were investigated. The production of the xylanase reached a peak in 8 days using untreated wheat straw with modified MS medium, pH 6.0 at 1:5 moisture level at 30 °C. Under optimized conditions yield as high as 6,887 ± 16 U/g of untreated wheat straw was achieved. Crude xylanase was used for enzymatic saccharification of agro-residues like wheat straw, rice bran, wheat bran, sugarcane bagasse and industrial paper pulp. Dilute alkali (1 N NaOH) and acid (1 N H₂SO₄) pretreatment were found to be beneficial for the efficient enzymatic hydrolysis of wheat straw. Dilute alkali and acid-pretreated wheat straw yielded 688 and 543 mg/g reducing sugar, respectively. Yield of 726 mg/g reducing sugar was obtained from paper pulp after 48 h of incubation.     

Enhanced inulinase production in solid state fermentation by a mutant of the marine yeast <Emphasis Type="Italic">Pichia guilliermondii</Emphasis> using surface response methodology and inulin hydrolysis

In order to isolate inulinase overproducers of the marine yeast Pichia guilliermondii, strain 1, cells were mutated by using UV light and LiCl₂. One mutant (M-30) with enhanced inulinase production was obtained. Response surface methodology (RSM) was used to optimize the medium compositions and cultivation conditions for inulinase production by the mutant in solid-state fermentation. The initial moisture, inoculum, the amount ratio of wheat bran to rice bran, temperature, pH for the maximum inulinase production by the mutant M-30 were found to be 60.5%, 2.5%, 0.42, 30°C and 6.50, respectively. Under the optimized conditions, 455.9 U/grams of dry substrate (gds) of inulinase activity was reached in the solid state fermentation culture of the mutant M-30 whereas the predicted maximum inulinase activity of 459.2 U/gds was derived from RSM regression. Under the same conditions, its parent strain only produced 291.0 U/gds of inulinase activity. This is the highest inulinase activity produced by the yeast strains reported so far.     

Production of haloduracin by <Emphasis Type="Italic">Bacillus halodurans</Emphasis> using solid-state fermentation

Bacillus halodurans was cultivated on wheat bran as a solid-state substrate and produced haloduracin, a bacteriocin, at about 245 AU per wheat bran. Supplementation of the bran with Lauria-Bertani broth decreased haloduracin production. However, production was stimulated by addition of Mg₂SO₄ and K₂HPO₄. The highest production was achieved at a wheat bran/moisture ratio of 1:1.8 and in the presence of 10% (w/w) Na₂CO₃. Under optimum conditions, the organism produced about 3,000 AU per gram dry bran.     

Production of Extracellular Alkaline α‐Amylase by Solid State Fermentation with a Newly Isolated Bacillus sp.

Abstract

Production of alkaline α‐amylase employing our laboratory isolate, Bacillus sp., under solid state fermentation, was optimized. The effect of wheat bran and lentil husk was examined. Lentil husk exhibited the highest enzyme production. The appropriate incubation time, inoculum size, moisture level, and buffer solution level were determined. Maximum yields of 216,000 and 172,800 U/g were achieved by employing lentil husk and wheat bran as substrates in 0.1 M carbonate/bicarbonate buffer at pH 10.0 with 30% initial moisture level at 24 h. Inoculum size and buffer solution level were found to be 20% and 1:0.5 for two solid substrates.     

Mixture design as first step for improved glutaminase production in solid-state fermentation by isolated Bacillus

Aim: Investigation of mixture‐design impact on glutaminase production by isolated Bacillus sp. Methods and Results: An augmented simplex centroid design was used to optimize a three (wheat bran, Bengal gram husk and palm seed fibre) component mixture for glutaminase production. Selected substrate materials showed impact on glutaminase production values at individual level by Bengal gram husk [2789 U gds^?1 (gram dry substrate] and in two‐level combination with wheat bran and Bengal gram husk (maximum of 3300 U gds^?1). Conclusion: Bengal gram husk is the most suitable substrate medium for glutaminase production by Bacillus sp. Maximum glutaminase production is achieved using solid‐substrate mixture at two‐level combinations in the ratio of 66 : 34 for Bengal gram husk and wheat bran, respectively. Significance and Impact of the Study: The present study has significance in large‐scale production of glutaminase at commercial level with the use of multi‐substrate rather than single‐substrate/support material.     

Production of mosquitocidal <Emphasis Type="Italic">Bacillus sphaericus</Emphasis> by solid state fermentation using agricultural wastes

In this study, Bacillus sphaericus NRC 69 was grown in culture media, in which 12 agricultural wastes were tested as the main carbon, nitrogen and energy sources under solid state fermentation. Of the 12 tested agricultural by-products, wheat bran was the most efficient substrate for the production of B. sphaericus mosquitocidal toxins against larvae of Culex pipiens (LC₅₀ 1.2 ppm). Mixtures of tested agricultural wastes separately with wheat bran enhanced the produced toxicity several folds and decreased LC₅₀ between 3.7- and 50-fold in comparison with that of agricultural wastes without mixing. The toxicity of B. sphaericus grown in wheat bran/rice hull at 8/2 (g/g) and wheat bran/barley straw at 1/4 (g/g) showed the same toxicity as that in wheat bran medium (LC₅₀ decreased 17- and 16-fold, in comparison with that in rice hull or barely straw media, respectively). In wheat bran medium, the maximum toxicity of the tested organism obtained at 50% moisture content, inoculum size 84 × 10⁶ CFU/g wheat bran and incubation for 6 days at 30°C. Addition of cheese whey permeate at 10% to wheat bran medium enhanced the toxicity of B. sphaericus NRC 69 about 46%.     

Solid state fermentation for production of α-amylase by a thermotolerant Bacillus subtilis from hot-spring water

The production of extracellular α-amylase by thermotolerant Bacillus subtilis was studied in solid state fermentation (SSF). The effect of wheat bran (WB) and rice husk (RH) was examined. The appropriate incubation period, moisture level, particle size and inoculum concentration was determined. Maximum yields of 159,520 and 21,760 U g⁻¹ were achieved by employing WB and RH as substrates in 0.1 M phosphate buffer at pH 7 with 30% initial moisture content at 24 and 48 h. Particle size and inoculum concentration were found to be 1000 μm, 20% and 500 μm, 15% for WB and RH, respectively. Enzyme yield was 7.3-fold higher with WB medium compared with RH.     

Improved xylanase production from a haloalkalophilic Staphylococcus sp. SG-13 using inexpensive agricultural residues

The production of an alkali-stable xylanase, with dual pH optima, from haloalkalophilic Staphylococcus sp. SG-13 has been enhanced using agro-residues in submerged fermentation and a biphasic growth system. The agro-residues such as wheat bran, sugarcane bagasse, corncobs and poplar wood when used as sole carbon source, improved the xylanase yield by five-fold as compared to xylose and xylan. Staphylococcus sp. SG-13 also produced equally good amounts of xylanase when grown simply in deionized water (pH 8.0) supplemented with agro-residues as sole carbon source. In the biphasic growth system (lower layer containing agricultural residue set in agar medium with liquid medium above it), the prime substrate, wheat bran (1% w/v), resulted in maximum xylanase production of 4525 U l^–1 (pH 7.5) and 4540 U l^–1 (pH 9.2) at an agar: broth ratio of 4.0 after 48 h of incubation at 37 °C under static conditions. In general, the cost-effective agro-residues were found to be more suitable inducers for xylanase production over expensive substrates like xylan.